Wiki source code of LA66 LoRaWAN Shield User Manual

Version 149.3 by Xiaoling on 2022/08/17 09:29

version	line-number	content
134.2	1
87.2	2
87.13	3	Table of Contents:
	4
1.1	5	{{toc/}}
	6
	7
6.1	8
87.2	9
146.5	10	= 1. LA66 LoRaWAN Shield =
87.2	11
	12
146.5	13	== 1.1 Overview ==
87.2	14
88.2	15
100.2	16	(((
	17	[[image:image-20220715000826-2.png\|\|height="145" width="220"]]
	18	)))
90.1	19
100.2	20	(((
	21
	22	)))
	23
	24	(((
100.4	25	(% style="color:blue" %)LA66 LoRaWAN Shield(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to Arduino projects.
100.2	26	)))
71.1	27
90.1	28	(((
100.2	29	(((
101.4	30	(% style="color:blue" %)LA66(%%) is a ready-to-use module that includes the (% style="color:blue" %)LoRaWAN v1.0.3 protocol(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
90.1	31	)))
100.2	32	)))
71.1	33
90.1	34	(((
100.2	35	(((
90.1	36	Each LA66 module includes a (% style="color:blue" %)world-unique OTAA key(%%) for LoRaWAN registration.
	37	)))
100.2	38	)))
90.1	39
	40	(((
100.2	41	(((
90.1	42	Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)open-source peer-to-peer LoRa Protocol(%%) for the none-LoRaWAN application.
	43	)))
100.2	44	)))
90.1	45
	46	(((
100.2	47	(((
90.1	48	LA66 is equipped with (% style="color:blue" %)TCXO crystal(%%) which ensures the module can achieve stable performance in extreme temperatures.
	49	)))
100.2	50	)))
90.1	51
	52
100.2	53
146.5	54	== 1.2 Features ==
71.1	55
137.6	56
71.1	57	* Arduino Shield base on LA66 LoRaWAN module
146.10	58	* Support LoRaWAN v1.0.3 protocol
71.1	59	* Support peer-to-peer protocol
	60	* TCXO crystal to ensure RF performance on low temperature
	61	* SMA connector
	62	* Available in different frequency LoRaWAN frequency bands.
	63	* World-wide unique OTAA keys.
	64	* AT Command via UART-TTL interface
	65	* Firmware upgradable via UART interface
	66	* Ultra-long RF range
	67
148.3	68
	69
	70
146.5	71	== 1.3 Specification ==
	72
	73
71.1	74	* CPU: 32-bit 48 MHz
	75	* Flash: 256KB
	76	* RAM: 64KB
	77	* Input Power Range: 1.8v ~~ 3.7v
	78	* Power Consumption: < 4uA.
	79	* Frequency Range: 150 MHz ~~ 960 MHz
	80	* Maximum Power +22 dBm constant RF output
	81	* High sensitivity: -148 dBm
	82	* Temperature:
	83	** Storage: -55 ~~ +125℃
	84	** Operating: -40 ~~ +85℃
	85	* Humidity:
	86	** Storage: 5 ~~ 95% (Non-Condensing)
	87	** Operating: 10 ~~ 95% (Non-Condensing)
	88	* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
	89	* LoRa Rx current: <9 mA
	90	* I/O Voltage: 3.3v
	91
146.5	92
	93
148.4	94
146.6	95	== 1.4 Pin Mapping & LED ==
137.6	96
11.1	97
147.2	98	[[image:image-20220817085048-1.png]]
146.1	99
147.3	100
149.2	101
125.1	102	~1. The LED lights up red when there is an upstream data packet
	103	2. When the network is successfully connected, the green light will be on for 5 seconds
	104	3. Purple light on when receiving downlink data packets
11.1	105
	106
134.5	107
146.6	108	== 1.5 Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
11.1	109
	110
134.3	111	Show connection diagram：
	112
	113
125.1	114	[[image:image-20220723170210-2.png\|\|height="908" width="681"]]
87.2	115
125.1	116
134.3	117
134.6	118	(% style="color:blue" %)1. open Arduino IDE
134.3	119
	120
125.1	121	[[image:image-20220723170545-4.png]]
	122
	123
134.3	124
134.6	125	(% style="color:blue" %)2. Open project
134.3	126
	127
134.7	128	LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
134.3	129
137.1	130	[[image:image-20220726135239-1.png]]
125.1	131
	132
149.3	133
134.6	134	(% style="color:blue" %)3. Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload
134.3	135
137.1	136	[[image:image-20220726135356-2.png]]
134.3	137
125.1	138
149.3	139
134.6	140	(% style="color:blue" %)4. After the upload is successful, open the serial port monitoring and send the AT command
125.1	141
134.3	142
131.1	143	[[image:image-20220723172235-7.png\|\|height="480" width="1027"]]
125.1	144
134.3	145
	146
146.6	147	== 1.6 Example: Join TTN network and send an uplink message, get downlink message. ==
87.2	148
	149
134.6	150	(% style="color:blue" %)1. Open project
134.3	151
	152
134.7	153	Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
134.3	154
134.7	155
131.1	156	[[image:image-20220723172502-8.png]]
87.2	157
131.1	158
134.3	159
134.6	160	(% style="color:blue" %)2. Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets
134.3	161
	162
131.1	163	[[image:image-20220723172938-9.png\|\|height="652" width="1050"]]
	164
	165
134.2	166
146.6	167	== 1.7 Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
87.2	168
	169
134.6	170	(% style="color:blue" %)1. Open project
134.2	171
	172
134.7	173	Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
134.2	174
	175
131.1	176	[[image:image-20220723173341-10.png\|\|height="581" width="1014"]]
87.2	177
131.1	178
134.2	179
134.6	180	(% style="color:blue" %)2. Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets
134.2	181
	182
131.1	183	[[image:image-20220723173950-11.png\|\|height="665" width="1012"]]
	184
	185
134.2	186
134.6	187	(% style="color:blue" %)3. Integration into Node-red via TTNV3
134.2	188
133.1	189	For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
	190
	191	[[image:image-20220723175700-12.png\|\|height="602" width="995"]]
	192
134.2	193
	194
146.6	195	== 1.8 Upgrade Firmware of LA66 LoRaWAN Shield ==
87.2	196
	197
146.6	198	=== 1.8.1 Items needed for update ===
87.2	199
134.2	200
74.1	201	1. LA66 LoRaWAN Shield
	202	1. Arduino
	203	1. USB TO TTL Adapter
13.1	204
75.1	205	[[image:image-20220602100052-2.png\|\|height="385" width="600"]]
20.1	206
	207
137.6	208
146.6	209	=== 1.8.2 Connection ===
20.1	210
87.2	211
75.1	212	[[image:image-20220602101311-3.png\|\|height="276" width="600"]]
20.1	213
	214
87.17	215	(((
87.2	216	(% style="color:blue" %)LA66 LoRaWAN Shield(%%) <-> (% style="color:blue" %)USB TTL
87.17	217	)))
87.2	218
87.16	219	(((
87.2	220	(% style="background-color:yellow" %)**GND <-> GND
87.8	221	TXD <-> TXD
	222	RXD <-> RXD**
87.16	223	)))
87.2	224
	225
77.1	226	Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
20.1	227
75.1	228	Connect USB TTL Adapter to PC after connecting the wires
20.1	229
	230
75.1	231	[[image:image-20220602102240-4.png\|\|height="304" width="600"]]
20.1	232
	233
137.6	234
146.8	235	=== 1.8.3 Upgrade steps ===
20.1	236
	237
146.9	238
134.2	239	==== (% style="color:blue" %)1. Switch SW1 to put in ISP position(%%) ====
87.2	240
	241
75.1	242	[[image:image-20220602102824-5.png\|\|height="306" width="600"]]
32.1	243
	244
87.9	245
134.2	246	==== (% style="color:blue" %)2. Press the RST switch once(%%) ====
32.1	247
87.10	248
148.2	249	[[image:image-20220817085447-1.png]]
32.1	250
75.1	251
87.9	252
148.3	253
134.2	254	==== (% style="color:blue" %)3. Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
75.1	255
39.1	256
87.18	257	(((
87.2	258	(% style="color:blue" %)1. Software download link: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
87.18	259	)))
87.2	260
	261
32.1	262	[[image:image-20220602103227-6.png]]
	263
87.2	264
32.1	265	[[image:image-20220602103357-7.png]]
	266
	267
87.2	268
76.1	269	(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
87.2	270	(% style="color:blue" %)2. Select the COM port corresponding to USB TTL
76.1	271
87.2	272
32.1	273	[[image:image-20220602103844-8.png]]
	274
	275
87.2	276
76.1	277	(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
87.2	278	(% style="color:blue" %)3. Select the bin file to burn
76.1	279
87.2	280
32.1	281	[[image:image-20220602104144-9.png]]
	282
87.2	283
32.1	284	[[image:image-20220602104251-10.png]]
	285
87.2	286
32.1	287	[[image:image-20220602104402-11.png]]
	288
	289
87.2	290
76.1	291	(% class="wikigeneratedid" id="HClicktostartthedownload" %)
87.2	292	(% style="color:blue" %)4. Click to start the download
76.1	293
32.1	294	[[image:image-20220602104923-13.png]]
	295
	296
87.10	297
76.1	298	(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
87.2	299	(% style="color:blue" %)5. Check update process
76.1	300
87.2	301
32.1	302	[[image:image-20220602104948-14.png]]
	303
	304
87.2	305
76.1	306	(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
87.2	307	(% style="color:blue" %)The following picture shows that the burning is successful
76.1	308
32.1	309	[[image:image-20220602105251-15.png]]
	310
72.1	311
	312
146.7	313	= 2. FAQ =
6.1	314
7.1	315
146.7	316	== 2.1 How to Compile Source Code for LA66? ==
87.2	317
100.3	318
146.4	319	Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
137.2	320
	321
	322
146.7	323	= 3. Order Info =
137.2	324
	325
146.7	326	Part Number: (% style="color:blue" %)LA66-LoRaWAN-Shield-XXX (%%)
87.4	327
	328
87.5	329	(% style="color:blue" %)XXX(%%): The default frequency band
86.1	330
87.5	331	* (% style="color:red" %)AS923(%%): LoRaWAN AS923 band
	332	* (% style="color:red" %)AU915(%%): LoRaWAN AU915 band
	333	* (% style="color:red" %)EU433(%%): LoRaWAN EU433 band
	334	* (% style="color:red" %)EU868(%%): LoRaWAN EU868 band
	335	* (% style="color:red" %)KR920(%%): LoRaWAN KR920 band
	336	* (% style="color:red" %)US915(%%): LoRaWAN US915 band
	337	* (% style="color:red" %)IN865(%%): LoRaWAN IN865 band
	338	* (% style="color:red" %)CN470(%%): LoRaWAN CN470 band
	339	* (% style="color:red" %)PP(%%): Peer to Peer LoRa Protocol
73.1	340
148.3	341
	342
146.7	343	= 4. Reference =
	344
	345
	346	* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
148.3	347
	348

Wiki source code of LA66 LoRaWAN Shield User Manual

Applications

Navigation