Wiki source code of LA66 LoRaWAN Shield User Manual

Version 149.1 by Xiaoling on 2022/08/17 08:56

version	line-number	content
134.2	1
87.2	2
87.13	3	Table of Contents:
	4
1.1	5	{{toc/}}
	6
	7
6.1	8
87.2	9
146.5	10	= 1. LA66 LoRaWAN Shield =
87.2	11
	12
146.5	13	== 1.1 Overview ==
87.2	14
88.2	15
100.2	16	(((
	17	[[image:image-20220715000826-2.png\|\|height="145" width="220"]]
	18	)))
90.1	19
100.2	20	(((
	21
	22	)))
	23
	24	(((
100.4	25	(% style="color:blue" %)LA66 LoRaWAN Shield(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to Arduino projects.
100.2	26	)))
71.1	27
90.1	28	(((
100.2	29	(((
101.4	30	(% style="color:blue" %)LA66(%%) is a ready-to-use module that includes the (% style="color:blue" %)LoRaWAN v1.0.3 protocol(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
90.1	31	)))
100.2	32	)))
71.1	33
90.1	34	(((
100.2	35	(((
90.1	36	Each LA66 module includes a (% style="color:blue" %)world-unique OTAA key(%%) for LoRaWAN registration.
	37	)))
100.2	38	)))
90.1	39
	40	(((
100.2	41	(((
90.1	42	Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)open-source peer-to-peer LoRa Protocol(%%) for the none-LoRaWAN application.
	43	)))
100.2	44	)))
90.1	45
	46	(((
100.2	47	(((
90.1	48	LA66 is equipped with (% style="color:blue" %)TCXO crystal(%%) which ensures the module can achieve stable performance in extreme temperatures.
	49	)))
100.2	50	)))
90.1	51
	52
100.2	53
146.5	54	== 1.2 Features ==
71.1	55
137.6	56
71.1	57	* Arduino Shield base on LA66 LoRaWAN module
146.10	58	* Support LoRaWAN v1.0.3 protocol
71.1	59	* Support peer-to-peer protocol
	60	* TCXO crystal to ensure RF performance on low temperature
	61	* SMA connector
	62	* Available in different frequency LoRaWAN frequency bands.
	63	* World-wide unique OTAA keys.
	64	* AT Command via UART-TTL interface
	65	* Firmware upgradable via UART interface
	66	* Ultra-long RF range
	67
148.3	68
	69
	70
146.5	71	== 1.3 Specification ==
	72
	73
71.1	74	* CPU: 32-bit 48 MHz
	75	* Flash: 256KB
	76	* RAM: 64KB
	77	* Input Power Range: 1.8v ~~ 3.7v
	78	* Power Consumption: < 4uA.
	79	* Frequency Range: 150 MHz ~~ 960 MHz
	80	* Maximum Power +22 dBm constant RF output
	81	* High sensitivity: -148 dBm
	82	* Temperature:
	83	** Storage: -55 ~~ +125℃
	84	** Operating: -40 ~~ +85℃
	85	* Humidity:
	86	** Storage: 5 ~~ 95% (Non-Condensing)
	87	** Operating: 10 ~~ 95% (Non-Condensing)
	88	* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
	89	* LoRa Rx current: <9 mA
	90	* I/O Voltage: 3.3v
	91
146.5	92
	93
148.4	94
146.6	95	== 1.4 Pin Mapping & LED ==
137.6	96
11.1	97
147.2	98	[[image:image-20220817085048-1.png]]
146.1	99
147.3	100
125.1	101	~1. The LED lights up red when there is an upstream data packet
	102	2. When the network is successfully connected, the green light will be on for 5 seconds
	103	3. Purple light on when receiving downlink data packets
11.1	104
	105
134.5	106
146.6	107	== 1.5 Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
11.1	108
	109
134.3	110	Show connection diagram：
	111
	112
125.1	113	[[image:image-20220723170210-2.png\|\|height="908" width="681"]]
87.2	114
125.1	115
134.3	116
134.6	117	(% style="color:blue" %)1. open Arduino IDE
134.3	118
	119
125.1	120	[[image:image-20220723170545-4.png]]
	121
	122
134.3	123
134.6	124	(% style="color:blue" %)2. Open project
134.3	125
	126
134.7	127	LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
134.3	128
137.1	129	[[image:image-20220726135239-1.png]]
125.1	130
	131
134.6	132	(% style="color:blue" %)3. Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload
134.3	133
137.1	134	[[image:image-20220726135356-2.png]]
134.3	135
125.1	136
134.6	137	(% style="color:blue" %)4. After the upload is successful, open the serial port monitoring and send the AT command
125.1	138
134.3	139
131.1	140	[[image:image-20220723172235-7.png\|\|height="480" width="1027"]]
125.1	141
134.3	142
	143
146.6	144	== 1.6 Example: Join TTN network and send an uplink message, get downlink message. ==
87.2	145
	146
134.6	147	(% style="color:blue" %)1. Open project
134.3	148
	149
134.7	150	Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
134.3	151
134.7	152
131.1	153	[[image:image-20220723172502-8.png]]
87.2	154
131.1	155
134.3	156
134.6	157	(% style="color:blue" %)2. Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets
134.3	158
	159
131.1	160	[[image:image-20220723172938-9.png\|\|height="652" width="1050"]]
	161
	162
134.2	163
146.6	164	== 1.7 Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
87.2	165
	166
134.6	167	(% style="color:blue" %)1. Open project
134.2	168
	169
134.7	170	Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
134.2	171
	172
131.1	173	[[image:image-20220723173341-10.png\|\|height="581" width="1014"]]
87.2	174
131.1	175
134.2	176
134.6	177	(% style="color:blue" %)2. Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets
134.2	178
	179
131.1	180	[[image:image-20220723173950-11.png\|\|height="665" width="1012"]]
	181
	182
134.2	183
134.6	184	(% style="color:blue" %)3. Integration into Node-red via TTNV3
134.2	185
133.1	186	For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
	187
	188	[[image:image-20220723175700-12.png\|\|height="602" width="995"]]
	189
134.2	190
	191
146.6	192	== 1.8 Upgrade Firmware of LA66 LoRaWAN Shield ==
87.2	193
	194
146.6	195	=== 1.8.1 Items needed for update ===
87.2	196
134.2	197
74.1	198	1. LA66 LoRaWAN Shield
	199	1. Arduino
	200	1. USB TO TTL Adapter
13.1	201
75.1	202	[[image:image-20220602100052-2.png\|\|height="385" width="600"]]
20.1	203
	204
137.6	205
146.6	206	=== 1.8.2 Connection ===
20.1	207
87.2	208
75.1	209	[[image:image-20220602101311-3.png\|\|height="276" width="600"]]
20.1	210
	211
87.17	212	(((
87.2	213	(% style="color:blue" %)LA66 LoRaWAN Shield(%%) <-> (% style="color:blue" %)USB TTL
87.17	214	)))
87.2	215
87.16	216	(((
87.2	217	(% style="background-color:yellow" %)**GND <-> GND
87.8	218	TXD <-> TXD
	219	RXD <-> RXD**
87.16	220	)))
87.2	221
	222
77.1	223	Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
20.1	224
75.1	225	Connect USB TTL Adapter to PC after connecting the wires
20.1	226
	227
75.1	228	[[image:image-20220602102240-4.png\|\|height="304" width="600"]]
20.1	229
	230
137.6	231
146.8	232	=== 1.8.3 Upgrade steps ===
20.1	233
	234
146.9	235
134.2	236	==== (% style="color:blue" %)1. Switch SW1 to put in ISP position(%%) ====
87.2	237
	238
75.1	239	[[image:image-20220602102824-5.png\|\|height="306" width="600"]]
32.1	240
	241
87.9	242
134.2	243	==== (% style="color:blue" %)2. Press the RST switch once(%%) ====
32.1	244
87.10	245
148.2	246	[[image:image-20220817085447-1.png]]
32.1	247
75.1	248
87.9	249
148.3	250
134.2	251	==== (% style="color:blue" %)3. Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
75.1	252
39.1	253
87.18	254	(((
87.2	255	(% style="color:blue" %)1. Software download link: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
87.18	256	)))
87.2	257
	258
32.1	259	[[image:image-20220602103227-6.png]]
	260
87.2	261
32.1	262	[[image:image-20220602103357-7.png]]
	263
	264
87.2	265
76.1	266	(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
87.2	267	(% style="color:blue" %)2. Select the COM port corresponding to USB TTL
76.1	268
87.2	269
32.1	270	[[image:image-20220602103844-8.png]]
	271
	272
87.2	273
76.1	274	(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
87.2	275	(% style="color:blue" %)3. Select the bin file to burn
76.1	276
87.2	277
32.1	278	[[image:image-20220602104144-9.png]]
	279
87.2	280
32.1	281	[[image:image-20220602104251-10.png]]
	282
87.2	283
32.1	284	[[image:image-20220602104402-11.png]]
	285
	286
87.2	287
76.1	288	(% class="wikigeneratedid" id="HClicktostartthedownload" %)
87.2	289	(% style="color:blue" %)4. Click to start the download
76.1	290
32.1	291	[[image:image-20220602104923-13.png]]
	292
	293
87.10	294
76.1	295	(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
87.2	296	(% style="color:blue" %)5. Check update process
76.1	297
87.2	298
32.1	299	[[image:image-20220602104948-14.png]]
	300
	301
87.2	302
76.1	303	(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
87.2	304	(% style="color:blue" %)The following picture shows that the burning is successful
76.1	305
32.1	306	[[image:image-20220602105251-15.png]]
	307
72.1	308
	309
146.7	310	= 2. FAQ =
6.1	311
7.1	312
146.7	313	== 2.1 How to Compile Source Code for LA66? ==
87.2	314
100.3	315
146.4	316	Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
137.2	317
	318
	319
146.7	320	= 3. Order Info =
137.2	321
	322
146.7	323	Part Number: (% style="color:blue" %)LA66-LoRaWAN-Shield-XXX (%%)
87.4	324
	325
87.5	326	(% style="color:blue" %)XXX(%%): The default frequency band
86.1	327
87.5	328	* (% style="color:red" %)AS923(%%): LoRaWAN AS923 band
	329	* (% style="color:red" %)AU915(%%): LoRaWAN AU915 band
	330	* (% style="color:red" %)EU433(%%): LoRaWAN EU433 band
	331	* (% style="color:red" %)EU868(%%): LoRaWAN EU868 band
	332	* (% style="color:red" %)KR920(%%): LoRaWAN KR920 band
	333	* (% style="color:red" %)US915(%%): LoRaWAN US915 band
	334	* (% style="color:red" %)IN865(%%): LoRaWAN IN865 band
	335	* (% style="color:red" %)CN470(%%): LoRaWAN CN470 band
	336	* (% style="color:red" %)PP(%%): Peer to Peer LoRa Protocol
73.1	337
148.3	338
	339
146.7	340	= 4. Reference =
	341
	342
	343	* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
148.3	344
	345

Wiki source code of LA66 LoRaWAN Shield User Manual

Applications

Navigation