Wiki source code of LA66 LoRaWAN Shield User Manual

Version 148.1 by Xiaoling on 2022/08/17 08:54

version	line-number	content
134.2	1
87.2	2
87.13	3	Table of Contents:
	4
1.1	5	{{toc/}}
	6
	7
6.1	8
87.2	9
146.5	10	= 1. LA66 LoRaWAN Shield =
87.2	11
	12
146.5	13	== 1.1 Overview ==
87.2	14
88.2	15
100.2	16	(((
	17	[[image:image-20220715000826-2.png\|\|height="145" width="220"]]
	18	)))
90.1	19
100.2	20	(((
	21
	22	)))
	23
	24	(((
100.4	25	(% style="color:blue" %)LA66 LoRaWAN Shield(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to Arduino projects.
100.2	26	)))
71.1	27
90.1	28	(((
100.2	29	(((
101.4	30	(% style="color:blue" %)LA66(%%) is a ready-to-use module that includes the (% style="color:blue" %)LoRaWAN v1.0.3 protocol(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
90.1	31	)))
100.2	32	)))
71.1	33
90.1	34	(((
100.2	35	(((
90.1	36	Each LA66 module includes a (% style="color:blue" %)world-unique OTAA key(%%) for LoRaWAN registration.
	37	)))
100.2	38	)))
90.1	39
	40	(((
100.2	41	(((
90.1	42	Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)open-source peer-to-peer LoRa Protocol(%%) for the none-LoRaWAN application.
	43	)))
100.2	44	)))
90.1	45
	46	(((
100.2	47	(((
90.1	48	LA66 is equipped with (% style="color:blue" %)TCXO crystal(%%) which ensures the module can achieve stable performance in extreme temperatures.
	49	)))
100.2	50	)))
90.1	51
	52
100.2	53
146.5	54	== 1.2 Features ==
71.1	55
137.6	56
71.1	57	* Arduino Shield base on LA66 LoRaWAN module
146.10	58	* Support LoRaWAN v1.0.3 protocol
71.1	59	* Support peer-to-peer protocol
	60	* TCXO crystal to ensure RF performance on low temperature
	61	* SMA connector
	62	* Available in different frequency LoRaWAN frequency bands.
	63	* World-wide unique OTAA keys.
	64	* AT Command via UART-TTL interface
	65	* Firmware upgradable via UART interface
	66	* Ultra-long RF range
	67
87.2	68
146.5	69	== 1.3 Specification ==
	70
	71
71.1	72	* CPU: 32-bit 48 MHz
	73	* Flash: 256KB
	74	* RAM: 64KB
	75	* Input Power Range: 1.8v ~~ 3.7v
	76	* Power Consumption: < 4uA.
	77	* Frequency Range: 150 MHz ~~ 960 MHz
	78	* Maximum Power +22 dBm constant RF output
	79	* High sensitivity: -148 dBm
	80	* Temperature:
	81	** Storage: -55 ~~ +125℃
	82	** Operating: -40 ~~ +85℃
	83	* Humidity:
	84	** Storage: 5 ~~ 95% (Non-Condensing)
	85	** Operating: 10 ~~ 95% (Non-Condensing)
	86	* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
	87	* LoRa Rx current: <9 mA
	88	* I/O Voltage: 3.3v
	89
146.5	90
	91
147.2	92
146.6	93	== 1.4 Pin Mapping & LED ==
137.6	94
11.1	95
147.2	96	[[image:image-20220817085048-1.png]]
146.1	97
147.3	98
125.1	99	~1. The LED lights up red when there is an upstream data packet
	100	2. When the network is successfully connected, the green light will be on for 5 seconds
	101	3. Purple light on when receiving downlink data packets
11.1	102
	103
134.5	104
146.6	105	== 1.5 Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
11.1	106
	107
134.3	108	Show connection diagram：
	109
	110
125.1	111	[[image:image-20220723170210-2.png\|\|height="908" width="681"]]
87.2	112
125.1	113
134.3	114
134.6	115	(% style="color:blue" %)1. open Arduino IDE
134.3	116
	117
125.1	118	[[image:image-20220723170545-4.png]]
	119
	120
134.3	121
134.6	122	(% style="color:blue" %)2. Open project
134.3	123
	124
134.7	125	LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
134.3	126
137.1	127	[[image:image-20220726135239-1.png]]
125.1	128
	129
134.6	130	(% style="color:blue" %)3. Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload
134.3	131
137.1	132	[[image:image-20220726135356-2.png]]
134.3	133
125.1	134
134.6	135	(% style="color:blue" %)4. After the upload is successful, open the serial port monitoring and send the AT command
125.1	136
134.3	137
131.1	138	[[image:image-20220723172235-7.png\|\|height="480" width="1027"]]
125.1	139
134.3	140
	141
146.6	142	== 1.6 Example: Join TTN network and send an uplink message, get downlink message. ==
87.2	143
	144
134.6	145	(% style="color:blue" %)1. Open project
134.3	146
	147
134.7	148	Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
134.3	149
134.7	150
131.1	151	[[image:image-20220723172502-8.png]]
87.2	152
131.1	153
134.3	154
134.6	155	(% style="color:blue" %)2. Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets
134.3	156
	157
131.1	158	[[image:image-20220723172938-9.png\|\|height="652" width="1050"]]
	159
	160
134.2	161
146.6	162	== 1.7 Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
87.2	163
	164
134.6	165	(% style="color:blue" %)1. Open project
134.2	166
	167
134.7	168	Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
134.2	169
	170
131.1	171	[[image:image-20220723173341-10.png\|\|height="581" width="1014"]]
87.2	172
131.1	173
134.2	174
134.6	175	(% style="color:blue" %)2. Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets
134.2	176
	177
131.1	178	[[image:image-20220723173950-11.png\|\|height="665" width="1012"]]
	179
	180
134.2	181
134.6	182	(% style="color:blue" %)3. Integration into Node-red via TTNV3
134.2	183
133.1	184	For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
	185
	186	[[image:image-20220723175700-12.png\|\|height="602" width="995"]]
	187
134.2	188
	189
146.6	190	== 1.8 Upgrade Firmware of LA66 LoRaWAN Shield ==
87.2	191
	192
146.6	193	=== 1.8.1 Items needed for update ===
87.2	194
134.2	195
74.1	196	1. LA66 LoRaWAN Shield
	197	1. Arduino
	198	1. USB TO TTL Adapter
13.1	199
75.1	200	[[image:image-20220602100052-2.png\|\|height="385" width="600"]]
20.1	201
	202
137.6	203
146.6	204	=== 1.8.2 Connection ===
20.1	205
87.2	206
75.1	207	[[image:image-20220602101311-3.png\|\|height="276" width="600"]]
20.1	208
	209
87.17	210	(((
87.2	211	(% style="color:blue" %)LA66 LoRaWAN Shield(%%) <-> (% style="color:blue" %)USB TTL
87.17	212	)))
87.2	213
87.16	214	(((
87.2	215	(% style="background-color:yellow" %)**GND <-> GND
87.8	216	TXD <-> TXD
	217	RXD <-> RXD**
87.16	218	)))
87.2	219
	220
77.1	221	Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
20.1	222
75.1	223	Connect USB TTL Adapter to PC after connecting the wires
20.1	224
	225
75.1	226	[[image:image-20220602102240-4.png\|\|height="304" width="600"]]
20.1	227
	228
137.6	229
146.8	230	=== 1.8.3 Upgrade steps ===
20.1	231
	232
146.9	233
134.2	234	==== (% style="color:blue" %)1. Switch SW1 to put in ISP position(%%) ====
87.2	235
	236
75.1	237	[[image:image-20220602102824-5.png\|\|height="306" width="600"]]
32.1	238
	239
87.9	240
134.2	241	==== (% style="color:blue" %)2. Press the RST switch once(%%) ====
32.1	242
87.10	243
75.1	244	[[image:image-20220602104701-12.png\|\|height="285" width="600"]]
32.1	245
75.1	246
87.9	247
134.2	248	==== (% style="color:blue" %)3. Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
75.1	249
39.1	250
87.18	251	(((
87.2	252	(% style="color:blue" %)1. Software download link: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
87.18	253	)))
87.2	254
	255
32.1	256	[[image:image-20220602103227-6.png]]
	257
87.2	258
32.1	259	[[image:image-20220602103357-7.png]]
	260
	261
87.2	262
76.1	263	(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
87.2	264	(% style="color:blue" %)2. Select the COM port corresponding to USB TTL
76.1	265
87.2	266
32.1	267	[[image:image-20220602103844-8.png]]
	268
	269
87.2	270
76.1	271	(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
87.2	272	(% style="color:blue" %)3. Select the bin file to burn
76.1	273
87.2	274
32.1	275	[[image:image-20220602104144-9.png]]
	276
87.2	277
32.1	278	[[image:image-20220602104251-10.png]]
	279
87.2	280
32.1	281	[[image:image-20220602104402-11.png]]
	282
	283
87.2	284
76.1	285	(% class="wikigeneratedid" id="HClicktostartthedownload" %)
87.2	286	(% style="color:blue" %)4. Click to start the download
76.1	287
32.1	288	[[image:image-20220602104923-13.png]]
	289
	290
87.10	291
76.1	292	(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
87.2	293	(% style="color:blue" %)5. Check update process
76.1	294
87.2	295
32.1	296	[[image:image-20220602104948-14.png]]
	297
	298
87.2	299
76.1	300	(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
87.2	301	(% style="color:blue" %)The following picture shows that the burning is successful
76.1	302
32.1	303	[[image:image-20220602105251-15.png]]
	304
72.1	305
	306
146.7	307	= 2. FAQ =
6.1	308
7.1	309
146.7	310	== 2.1 How to Compile Source Code for LA66? ==
87.2	311
100.3	312
146.4	313	Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
137.2	314
	315
	316
146.7	317	= 3. Order Info =
137.2	318
	319
146.7	320	Part Number: (% style="color:blue" %)LA66-LoRaWAN-Shield-XXX (%%)
87.4	321
	322
87.5	323	(% style="color:blue" %)XXX(%%): The default frequency band
86.1	324
87.5	325	* (% style="color:red" %)AS923(%%): LoRaWAN AS923 band
	326	* (% style="color:red" %)AU915(%%): LoRaWAN AU915 band
	327	* (% style="color:red" %)EU433(%%): LoRaWAN EU433 band
	328	* (% style="color:red" %)EU868(%%): LoRaWAN EU868 band
	329	* (% style="color:red" %)KR920(%%): LoRaWAN KR920 band
	330	* (% style="color:red" %)US915(%%): LoRaWAN US915 band
	331	* (% style="color:red" %)IN865(%%): LoRaWAN IN865 band
	332	* (% style="color:red" %)CN470(%%): LoRaWAN CN470 band
	333	* (% style="color:red" %)PP(%%): Peer to Peer LoRa Protocol
73.1	334
146.7	335	= 4. Reference =
	336
	337
	338	* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]

Wiki source code of LA66 LoRaWAN Shield User Manual

Applications

Navigation