Wiki source code of LA66 LoRaWAN Module

Version 134.3 by Xiaoling on 2022/07/26 10:37

version	line-number	content
134.2	1
87.2	2
87.13	3	Table of Contents:
	4
1.1	5	{{toc/}}
	6
	7
6.1	8
87.2	9	= 1. LA66 LoRaWAN Module =
	10
	11
	12	== 1.1 What is LA66 LoRaWAN Module ==
	13
	14
87.15	15	(((
100.2	16	(((
	17	[[image:image-20220719093358-2.png\|\|height="145" width="220"]](% style="color:blue" %)
	18	)))
88.2	19
100.2	20	(((
	21
	22	)))
	23
	24	(((
65.1	25	(% style="color:blue" %)Dragino LA66(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
87.15	26	)))
100.2	27	)))
1.1	28
87.15	29	(((
100.2	30	(((
101.4	31	(% style="color:blue" %)LA66(%%) is a ready-to-use module that includes the (% style="color:blue" %)LoRaWAN v1.0.3 protocol(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
87.15	32	)))
100.2	33	)))
1.1	34
87.15	35	(((
100.2	36	(((
65.1	37	Each LA66 module includes a (% style="color:blue" %)world-unique OTAA key(%%) for LoRaWAN registration.
87.15	38	)))
1.1	39
87.15	40	(((
65.1	41	Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)open-source peer-to-peer LoRa Protocol(%%) for the none-LoRaWAN application.
87.15	42	)))
100.2	43	)))
1.1	44
87.15	45	(((
100.2	46	(((
65.1	47	LA66 is equipped with (% style="color:blue" %)TCXO crystal(%%) which ensures the module can achieve stable performance in extreme temperatures.
87.15	48	)))
100.2	49	)))
1.1	50
67.1	51
100.2	52
87.2	53	== 1.2 Features ==
64.1	54
68.1	55	* Support LoRaWAN v1.0.4 protocol
	56	* Support peer-to-peer protocol
	57	* TCXO crystal to ensure RF performance on low temperature
	58	* SMD Antenna pad and i-pex antenna connector
	59	* Available in different frequency LoRaWAN frequency bands.
	60	* World-wide unique OTAA keys.
69.1	61	* AT Command via UART-TTL interface
	62	* Firmware upgradable via UART interface
	63	* Ultra-long RF range
64.1	64
87.2	65	== 1.3 Specification ==
	66
68.1	67	* CPU: 32-bit 48 MHz
	68	* Flash: 256KB
	69	* RAM: 64KB
66.1	70	* Input Power Range: 1.8v ~~ 3.7v
	71	* Power Consumption: < 4uA.
	72	* Frequency Range: 150 MHz ~~ 960 MHz
	73	* Maximum Power +22 dBm constant RF output
	74	* High sensitivity: -148 dBm
	75	* Temperature:
	76	** Storage: -55 ~~ +125℃
	77	** Operating: -40 ~~ +85℃
	78	* Humidity:
	79	** Storage: 5 ~~ 95% (Non-Condensing)
	80	** Operating: 10 ~~ 95% (Non-Condensing)
	81	* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
	82	* LoRa Rx current: <9 mA
	83	* I/O Voltage: 3.3v
1.1	84
87.2	85	== 1.4 AT Command ==
	86
98.2	87
66.1	88	AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
1.1	89
3.1	90
98.4	91
87.2	92	== 1.5 Dimension ==
3.1	93
98.2	94	[[image:image-20220718094750-3.png]]
3.1	95
	96
5.1	97
87.2	98	== 1.6 Pin Mapping ==
	99
101.2	100	[[image:image-20220720111850-1.png]]
87.2	101
5.1	102
	103
87.2	104	== 1.7 Land Pattern ==
	105
5.1	106	[[image:image-20220517072821-2.png]]
	107
	108
	109
87.2	110	= 2. LA66 LoRaWAN Shield =
6.1	111
	112
87.2	113	== 2.1 Overview ==
	114
90.1	115
100.2	116	(((
	117	[[image:image-20220715000826-2.png\|\|height="145" width="220"]]
	118	)))
90.1	119
100.2	120	(((
	121
	122	)))
	123
	124	(((
100.4	125	(% style="color:blue" %)LA66 LoRaWAN Shield(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to Arduino projects.
100.2	126	)))
71.1	127
90.1	128	(((
100.2	129	(((
101.4	130	(% style="color:blue" %)LA66(%%) is a ready-to-use module that includes the (% style="color:blue" %)LoRaWAN v1.0.3 protocol(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
90.1	131	)))
100.2	132	)))
71.1	133
90.1	134	(((
100.2	135	(((
90.1	136	Each LA66 module includes a (% style="color:blue" %)world-unique OTAA key(%%) for LoRaWAN registration.
	137	)))
100.2	138	)))
90.1	139
	140	(((
100.2	141	(((
90.1	142	Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)open-source peer-to-peer LoRa Protocol(%%) for the none-LoRaWAN application.
	143	)))
100.2	144	)))
90.1	145
	146	(((
100.2	147	(((
90.1	148	LA66 is equipped with (% style="color:blue" %)TCXO crystal(%%) which ensures the module can achieve stable performance in extreme temperatures.
	149	)))
100.2	150	)))
90.1	151
	152
100.2	153
87.2	154	== 2.2 Features ==
71.1	155
	156	* Arduino Shield base on LA66 LoRaWAN module
	157	* Support LoRaWAN v1.0.4 protocol
	158	* Support peer-to-peer protocol
	159	* TCXO crystal to ensure RF performance on low temperature
	160	* SMA connector
	161	* Available in different frequency LoRaWAN frequency bands.
	162	* World-wide unique OTAA keys.
	163	* AT Command via UART-TTL interface
	164	* Firmware upgradable via UART interface
	165	* Ultra-long RF range
	166
87.2	167	== 2.3 Specification ==
	168
71.1	169	* CPU: 32-bit 48 MHz
	170	* Flash: 256KB
	171	* RAM: 64KB
	172	* Input Power Range: 1.8v ~~ 3.7v
	173	* Power Consumption: < 4uA.
	174	* Frequency Range: 150 MHz ~~ 960 MHz
	175	* Maximum Power +22 dBm constant RF output
	176	* High sensitivity: -148 dBm
	177	* Temperature:
	178	** Storage: -55 ~~ +125℃
	179	** Operating: -40 ~~ +85℃
	180	* Humidity:
	181	** Storage: 5 ~~ 95% (Non-Condensing)
	182	** Operating: 10 ~~ 95% (Non-Condensing)
	183	* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
	184	* LoRa Rx current: <9 mA
	185	* I/O Voltage: 3.3v
	186
125.1	187	== 2.4 LED ==
11.1	188
125.1	189	~1. The LED lights up red when there is an upstream data packet
	190	2. When the network is successfully connected, the green light will be on for 5 seconds
	191	3. Purple light on when receiving downlink data packets
11.1	192
	193
87.2	194	== 2.5 Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
11.1	195
	196
134.3	197	Show connection diagram：
	198
	199
125.1	200	[[image:image-20220723170210-2.png\|\|height="908" width="681"]]
87.2	201
125.1	202
134.3	203
	204	1. open Arduino IDE
	205
	206
125.1	207	[[image:image-20220723170545-4.png]]
	208
	209
134.3	210
	211	2. Open project
	212
	213
	214	LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
	215
131.1	216	[[image:image-20220723170750-5.png\|\|height="533" width="930"]]
125.1	217
	218
134.3	219
	220	3. Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload
	221
	222
125.1	223	[[image:image-20220723171228-6.png]]
	224
	225
134.3	226
	227	4. After the upload is successful, open the serial port monitoring and send the AT command
	228
	229
131.1	230	[[image:image-20220723172235-7.png\|\|height="480" width="1027"]]
125.1	231
134.3	232
	233
87.2	234	== 2.6 Example: Join TTN network and send an uplink message, get downlink message. ==
	235
	236
134.3	237	1. Open project
	238
	239
	240	Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
	241
131.1	242	[[image:image-20220723172502-8.png]]
87.2	243
131.1	244
134.3	245
	246	2. Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets
	247
	248
131.1	249	[[image:image-20220723172938-9.png\|\|height="652" width="1050"]]
	250
	251
134.2	252
133.1	253	== 2.7 Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
87.2	254
	255
134.2	256	1. Open project
	257
	258
	259	Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
	260
	261
131.1	262	[[image:image-20220723173341-10.png\|\|height="581" width="1014"]]
87.2	263
131.1	264
134.2	265
	266	2. Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets
	267
	268
131.1	269	[[image:image-20220723173950-11.png\|\|height="665" width="1012"]]
	270
	271
134.2	272
	273	3. Integration into Node-red via TTNV3
	274
133.1	275	For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
	276
	277	[[image:image-20220723175700-12.png\|\|height="602" width="995"]]
	278
134.2	279
	280
87.2	281	== 2.8 Upgrade Firmware of LA66 LoRaWAN Shield ==
	282
	283
	284	=== 2.8.1 Items needed for update ===
	285
134.2	286
74.1	287	1. LA66 LoRaWAN Shield
	288	1. Arduino
	289	1. USB TO TTL Adapter
13.1	290
75.1	291	[[image:image-20220602100052-2.png\|\|height="385" width="600"]]
20.1	292
	293
87.2	294	=== 2.8.2 Connection ===
20.1	295
87.2	296
75.1	297	[[image:image-20220602101311-3.png\|\|height="276" width="600"]]
20.1	298
	299
87.17	300	(((
87.2	301	(% style="color:blue" %)LA66 LoRaWAN Shield(%%) <-> (% style="color:blue" %)USB TTL
87.17	302	)))
87.2	303
87.16	304	(((
87.2	305	(% style="background-color:yellow" %)**GND <-> GND
87.8	306	TXD <-> TXD
	307	RXD <-> RXD**
87.16	308	)))
87.2	309
	310
77.1	311	Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
20.1	312
75.1	313	Connect USB TTL Adapter to PC after connecting the wires
20.1	314
	315
75.1	316	[[image:image-20220602102240-4.png\|\|height="304" width="600"]]
20.1	317
	318
87.2	319	=== 2.8.3 Upgrade steps ===
20.1	320
	321
134.2	322	==== (% style="color:blue" %)1. Switch SW1 to put in ISP position(%%) ====
87.2	323
	324
75.1	325	[[image:image-20220602102824-5.png\|\|height="306" width="600"]]
32.1	326
	327
87.9	328
134.2	329	==== (% style="color:blue" %)2. Press the RST switch once(%%) ====
32.1	330
87.10	331
75.1	332	[[image:image-20220602104701-12.png\|\|height="285" width="600"]]
32.1	333
75.1	334
87.9	335
134.2	336	==== (% style="color:blue" %)3. Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
75.1	337
39.1	338
87.18	339	(((
87.2	340	(% style="color:blue" %)1. Software download link: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
87.18	341	)))
87.2	342
	343
32.1	344	[[image:image-20220602103227-6.png]]
	345
87.2	346
32.1	347	[[image:image-20220602103357-7.png]]
	348
	349
87.2	350
76.1	351	(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
87.2	352	(% style="color:blue" %)2. Select the COM port corresponding to USB TTL
76.1	353
87.2	354
32.1	355	[[image:image-20220602103844-8.png]]
	356
	357
87.2	358
76.1	359	(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
87.2	360	(% style="color:blue" %)3. Select the bin file to burn
76.1	361
87.2	362
32.1	363	[[image:image-20220602104144-9.png]]
	364
87.2	365
32.1	366	[[image:image-20220602104251-10.png]]
	367
87.2	368
32.1	369	[[image:image-20220602104402-11.png]]
	370
	371
87.2	372
76.1	373	(% class="wikigeneratedid" id="HClicktostartthedownload" %)
87.2	374	(% style="color:blue" %)4. Click to start the download
76.1	375
32.1	376	[[image:image-20220602104923-13.png]]
	377
	378
87.10	379
76.1	380	(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
87.2	381	(% style="color:blue" %)5. Check update process
76.1	382
87.2	383
32.1	384	[[image:image-20220602104948-14.png]]
	385
	386
87.2	387
76.1	388	(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
87.2	389	(% style="color:blue" %)The following picture shows that the burning is successful
76.1	390
32.1	391	[[image:image-20220602105251-15.png]]
	392
72.1	393
	394
87.2	395	= 3. LA66 USB LoRaWAN Adapter =
6.1	396
7.1	397
87.2	398	== 3.1 Overview ==
	399
100.3	400
93.1	401	[[image:image-20220715001142-3.png\|\|height="145" width="220"]]
	402
100.3	403
100.5	404	(((
91.1	405	(% style="color:blue" %)LA66 USB LoRaWAN Adapter(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
100.5	406	)))
52.1	407
100.5	408	(((
101.4	409	(% style="color:blue" %)LA66(%%) is a ready-to-use module that includes the (% style="color:blue" %)LoRaWAN v1.0.3 protocol(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
100.5	410	)))
73.1	411
100.5	412	(((
90.1	413	Each LA66 module includes a (% style="color:blue" %)world-unique OTAA key(%%) for LoRaWAN registration.
100.5	414	)))
90.1	415
100.5	416	(((
90.1	417	Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)open-source peer-to-peer LoRa Protocol(%%) for the none-LoRaWAN application.
100.5	418	)))
90.1	419
100.5	420	(((
90.1	421	LA66 is equipped with (% style="color:blue" %)TCXO crystal(%%) which ensures the module can achieve stable performance in extreme temperatures.
100.5	422	)))
90.1	423
	424
100.3	425
87.2	426	== 3.2 Features ==
73.1	427
	428	* LoRaWAN USB adapter base on LA66 LoRaWAN module
	429	* Ultra-long RF range
	430	* Support LoRaWAN v1.0.4 protocol
	431	* Support peer-to-peer protocol
	432	* TCXO crystal to ensure RF performance on low temperature
	433	* Spring RF antenna
	434	* Available in different frequency LoRaWAN frequency bands.
	435	* World-wide unique OTAA keys.
	436	* AT Command via UART-TTL interface
	437	* Firmware upgradable via UART interface
93.3	438	* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
73.1	439
134.2	440
	441
87.3	442	== 3.3 Specification ==
73.1	443
	444	* CPU: 32-bit 48 MHz
	445	* Flash: 256KB
	446	* RAM: 64KB
	447	* Input Power Range: 5v
	448	* Frequency Range: 150 MHz ~~ 960 MHz
	449	* Maximum Power +22 dBm constant RF output
	450	* High sensitivity: -148 dBm
	451	* Temperature:
	452	** Storage: -55 ~~ +125℃
	453	** Operating: -40 ~~ +85℃
	454	* Humidity:
	455	** Storage: 5 ~~ 95% (Non-Condensing)
	456	** Operating: 10 ~~ 95% (Non-Condensing)
	457	* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
	458	* LoRa Rx current: <9 mA
	459
134.2	460
	461
87.3	462	== 3.4 Pin Mapping & LED ==
7.1	463
	464
87.3	465
	466	== 3.5 Example: Send & Get Messages via LoRaWAN in PC ==
	467
	468
100.5	469	(((
78.2	470	Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
100.5	471	)))
58.1	472
	473
87.3	474	(% style="color:blue" %)1. Connect the LA66 USB LoRaWAN adapter to PC
	475
	476
106.1	477	[[image:image-20220723100027-1.png]]
78.2	478
87.3	479
58.1	480	Open the serial port tool
	481
	482	[[image:image-20220602161617-8.png]]
	483
78.2	484	[[image:image-20220602161718-9.png\|\|height="457" width="800"]]
58.1	485
	486
	487
87.3	488	(% style="color:blue" %)2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.
	489
78.2	490	The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
58.1	491
87.3	492
78.2	493	[[image:image-20220602161935-10.png\|\|height="498" width="800"]]
58.1	494
78.2	495
	496
87.3	497	(% style="color:blue" %)3. See Uplink Command
78.2	498
87.3	499	Command format: (% style="color:#4472c4" %) AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
	500
58.1	501	example: AT+SENDB=01,02,8,05820802581ea0a5
	502
78.2	503	[[image:image-20220602162157-11.png\|\|height="497" width="800"]]
58.1	504
	505
	506
87.3	507	(% style="color:blue" %)4. Check to see if TTN received the message
	508
78.2	509	[[image:image-20220602162331-12.png\|\|height="420" width="800"]]
	510
	511
	512
87.3	513	== 3.6 Example: Send PC's CPU/RAM usage to TTN via python ==
81.1	514
87.3	515
87.1	516	Use python as an example：[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
81.1	517
106.1	518	(Raspberry Pi example: [[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
81.1	519
87.3	520	(% style="color:red" %)Preconditions:
81.1	521
87.3	522	(% style="color:red" %)1. LA66 USB LoRaWAN Adapter works fine
81.1	523
87.3	524	(% style="color:red" %)2. LA66 USB LoRaWAN Adapter is registered with TTN
81.1	525
	526
	527
87.3	528	(% style="color:blue" %)Steps for usage:
	529
	530	(% style="color:blue" %)1.(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
	531
	532	(% style="color:blue" %)2.(%%) Run the python script in PC and see the TTN
	533
81.1	534	[[image:image-20220602115852-3.png\|\|height="450" width="1187"]]
	535
	536
	537
87.4	538	== 3.7 Example: Send & Get Messages via LoRaWAN in RPi ==
11.1	539
87.4	540
79.1	541	Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
12.1	542
79.1	543
87.5	544	(% style="color:blue" %)1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi
87.4	545
106.1	546	[[image:image-20220723100439-2.png]]
43.1	547
52.1	548
	549
87.4	550	(% style="color:blue" %)2. Install Minicom in RPi.
	551
79.1	552	(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
52.1	553
87.4	554	(% style="background-color:yellow" %)apt update
52.1	555
87.4	556	(% style="background-color:yellow" %)apt install minicom
52.1	557
	558
79.1	559	Use minicom to connect to the RPI's terminal
52.1	560
79.1	561	[[image:image-20220602153146-3.png\|\|height="439" width="500"]]
52.1	562
	563
87.4	564
87.11	565	(% style="color:blue" %)3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.
8.1	566
87.11	567	The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
	568
	569
79.1	570	[[image:image-20220602154928-5.png\|\|height="436" width="500"]]
46.1	571
	572
	573
87.4	574	(% style="color:blue" %)4. Send Uplink message
46.1	575
87.5	576	Format: (% style="color:#4472c4" %)AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
87.4	577
79.1	578	example: AT+SENDB=01,02,8,05820802581ea0a5
46.1	579
87.4	580
79.1	581	[[image:image-20220602160339-6.png\|\|height="517" width="600"]]
	582
87.4	583
	584
79.1	585	Check to see if TTN received the message
	586
	587	[[image:image-20220602160627-7.png\|\|height="369" width="800"]]
	588
	589
	590
134.1	591	== 3.8 Example: Use of LA66 USB LoRaWAN Adapter and APP sample process and DRAGINO-LA66-APP. ==
11.1	592
134.2	593
106.1	594	=== 3.8.1 DRAGINO-LA66-APP ===
13.1	595
134.2	596
106.1	597	[[image:image-20220723102027-3.png]]
63.1	598
106.1	599
134.2	600
	601	==== (% style="color:blue" %)Overview：(%%) ====
	602
	603
134.1	604	DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Adapter and APP sample process. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Adapter.
106.1	605
111.1	606	View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
	607
106.1	608
134.2	609
	610	==== (% style="color:blue" %)Conditions of Use：(%%) ====
	611
	612
106.1	613	Requires a type-c to USB adapter
	614
	615	[[image:image-20220723104754-4.png]]
	616
	617
134.2	618
	619	==== (% style="color:blue" %)Use of APP:(%%) ====
	620
	621
110.1	622	Function and page introduction
	623
	624	[[image:image-20220723113448-7.png\|\|height="1481" width="670"]]
	625
	626	1.Display LA66 USB LoRaWAN Module connection status
	627
	628	2.Check and reconnect
	629
	630	3.Turn send timestamps on or off
	631
	632	4.Display LoRaWan connection status
	633
	634	5.Check LoRaWan connection status
	635
	636	6.The RSSI value of the node when the ACK is received
	637
	638	7.Node's Signal Strength Icon
	639
	640	8.Set the packet sending interval of the node in seconds
	641
	642	9.AT command input box
	643
	644	10.Send AT command button
	645
	646	11.Node log box
	647
	648	12.clear log button
	649
	650	13.exit button
	651
134.2	652
106.1	653	LA66 USB LoRaWAN Module not connected
	654
110.1	655	[[image:image-20220723110520-5.png\|\|height="903" width="677"]]
106.1	656
134.2	657
	658
110.1	659	Connect LA66 USB LoRaWAN Module
106.1	660
110.1	661	[[image:image-20220723110626-6.png\|\|height="906" width="680"]]
	662
134.2	663
	664
134.1	665	=== 3.8.2 Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Adapter and integrate it into Node-RED ===
111.1	666
	667
134.2	668	1. Register LA66 USB LoRaWAN Module to TTNV3
	669
113.1	670	[[image:image-20220723134549-8.png]]
	671
	672
134.2	673
	674	2. Open Node-RED,And import the JSON file to generate the flow
	675
117.1	676	Sample JSON file please go to this link to download：放置JSON文件的链接
	677
115.1	678	For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
113.1	679
117.1	680	The following is the positioning effect map
	681
	682	[[image:image-20220723144339-1.png]]
	683
134.2	684
	685
87.4	686	== 3.9 Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
73.1	687
134.2	688
134.1	689	The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
73.1	690
119.1	691	Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
73.1	692
119.1	693	[[image:image-20220723150132-2.png]]
73.1	694
119.1	695
134.2	696
87.4	697	= 4. Order Info =
73.1	698
87.4	699
87.5	700	Part Number: (% style="color:blue" %)LA66-XXX(%%), (% style="color:blue" %)LA66-LoRaWAN-Shield-XXX (%%) or (% style="color:blue" %)LA66-USB-LoRaWAN-Adapter-XXX
87.4	701
	702
87.5	703	(% style="color:blue" %)XXX(%%): The default frequency band
86.1	704
87.5	705	* (% style="color:red" %)AS923(%%): LoRaWAN AS923 band
	706	* (% style="color:red" %)AU915(%%): LoRaWAN AU915 band
	707	* (% style="color:red" %)EU433(%%): LoRaWAN EU433 band
	708	* (% style="color:red" %)EU868(%%): LoRaWAN EU868 band
	709	* (% style="color:red" %)KR920(%%): LoRaWAN KR920 band
	710	* (% style="color:red" %)US915(%%): LoRaWAN US915 band
	711	* (% style="color:red" %)IN865(%%): LoRaWAN IN865 band
	712	* (% style="color:red" %)CN470(%%): LoRaWAN CN470 band
	713	* (% style="color:red" %)PP(%%): Peer to Peer LoRa Protocol
73.1	714
134.2	715
87.4	716	= 5. Reference =
	717
134.2	718
78.1	719	* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]

Wiki source code of LA66 LoRaWAN Module

Applications

Navigation