Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 98.3 >
edited by Xiaoling
on 2022/07/18 09:56
To version < 166.4
edited by Xiaoling
on 2023/05/26 14:19
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 LoRaWAN Shield User Manual
Content
... ... @@ -6,41 +6,57 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
10 += 1.  LA66 LoRaWAN Shield =
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
12 +== 1.1  Overview ==
13 13  
14 14  
15 15  (((
16 -[[image:image-20220715000242-1.png||height="110" width="132"]]
16 +[[image:image-20220715000826-2.png||height="145" width="220"]]
17 +)))
17 17  
18 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
19 +(((
20 +
19 19  )))
20 20  
21 21  (((
22 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
24 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
23 23  )))
24 24  
25 25  (((
28 +(((
29 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
30 +)))
31 +)))
32 +
33 +(((
34 +(((
26 26  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
27 27  )))
37 +)))
28 28  
29 29  (((
40 +(((
30 30  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
31 31  )))
43 +)))
32 32  
33 33  (((
46 +(((
34 34  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
35 35  )))
49 +)))
36 36  
37 37  
38 38  == 1.2  Features ==
39 39  
40 -* Support LoRaWAN v1.0.4 protocol
54 +
55 +* Arduino Shield base on LA66 LoRaWAN module
56 +* Support LoRaWAN v1.0.3 protocol
41 41  * Support peer-to-peer protocol
42 42  * TCXO crystal to ensure RF performance on low temperature
43 -* SMD Antenna pad and i-pex antenna connector
59 +* SMA connector
44 44  * Available in different frequency LoRaWAN frequency bands.
45 45  * World-wide unique OTAA keys.
46 46  * AT Command via UART-TTL interface
... ... @@ -48,9 +48,9 @@
48 48  * Ultra-long RF range
49 49  
50 50  
51 -
52 52  == 1.3  Specification ==
53 53  
69 +
54 54  * CPU: 32-bit 48 MHz
55 55  * Flash: 256KB
56 56  * RAM: 64KB
... ... @@ -70,429 +70,342 @@
70 70  * I/O Voltage: 3.3v
71 71  
72 72  
89 +== 1.4  Pin Mapping & LED ==
73 73  
74 74  
75 -== 1.4  AT Command ==
92 +[[image:image-20220817085048-1.png||height="533" width="734"]]
76 76  
77 77  
78 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
79 79  
96 +~1. The LED lights up red when there is an upstream data packet
80 80  
81 -== 1.5  Dimension ==
98 +2. When the network is successfully connected, the green light will be on for 5 seconds
82 82  
83 -[[image:image-20220718094750-3.png]]
100 +3. Purple light on when receiving downlink data packets
84 84  
85 85  
103 +[[image:image-20220820112305-1.png||height="515" width="749"]]
86 86  
87 87  
88 -== 1.6  Pin Mapping ==
106 +== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
89 89  
90 90  
91 -[[image:image-20220523101537-1.png]]
109 +(% style="color:blue" %)**Show connection diagram：**
92 92  
93 93  
112 +[[image:image-20220723170210-2.png||height="908" width="681"]]
94 94  
95 -== 1.7  Land Pattern ==
96 96  
97 -[[image:image-20220517072821-2.png]]
98 98  
116 +(% style="color:blue" %)**1.  open Arduino IDE**
99 99  
100 100  
101 -= 2.  LA66 LoRaWAN Shield =
119 +[[image:image-20220723170545-4.png]]
102 102  
103 103  
104 -== 2.1  Overview ==
105 105  
123 +(% style="color:blue" %)**2.  Open project**
106 106  
107 -[[image:image-20220715000826-2.png||height="386" width="449"]]
108 108  
126 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
109 109  
110 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
128 +[[image:image-20220726135239-1.png]]
111 111  
112 -(((
113 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
114 -)))
115 115  
116 -(((
117 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
118 -)))
119 119  
120 -(((
121 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
122 -)))
132 +(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
123 123  
124 -(((
125 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
126 -)))
127 127  
135 +[[image:image-20220726135356-2.png]]
128 128  
129 -== 2.2  Features ==
130 130  
131 -* Arduino Shield base on LA66 LoRaWAN module
132 -* Support LoRaWAN v1.0.4 protocol
133 -* Support peer-to-peer protocol
134 -* TCXO crystal to ensure RF performance on low temperature
135 -* SMA connector
136 -* Available in different frequency LoRaWAN frequency bands.
137 -* World-wide unique OTAA keys.
138 -* AT Command via UART-TTL interface
139 -* Firmware upgradable via UART interface
140 -* Ultra-long RF range
141 141  
142 -== 2.3  Specification ==
139 +(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
143 143  
144 -* CPU: 32-bit 48 MHz
145 -* Flash: 256KB
146 -* RAM: 64KB
147 -* Input Power Range: 1.8v ~~ 3.7v
148 -* Power Consumption: < 4uA.
149 -* Frequency Range: 150 MHz ~~ 960 MHz
150 -* Maximum Power +22 dBm constant RF output
151 -* High sensitivity: -148 dBm
152 -* Temperature:
153 -** Storage: -55 ~~ +125℃
154 -** Operating: -40 ~~ +85℃
155 -* Humidity:
156 -** Storage: 5 ~~ 95% (Non-Condensing)
157 -** Operating: 10 ~~ 95% (Non-Condensing)
158 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
159 -* LoRa Rx current: <9 mA
160 -* I/O Voltage: 3.3v
161 161  
162 -== 2.4  Pin Mapping & LED ==
142 +[[image:image-20220723172235-7.png||height="480" width="1027"]]
163 163  
164 164  
145 +== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
165 165  
166 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
167 167  
148 +(% style="color:blue" %)**1.  Open project**
168 168  
169 169  
170 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
151 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
171 171  
172 172  
154 +[[image:image-20220723172502-8.png]]
173 173  
174 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
175 175  
176 176  
158 +(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
177 177  
178 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
179 179  
161 +[[image:image-20220723172938-9.png||height="652" width="1050"]]
180 180  
181 -=== 2.8.1  Items needed for update ===
182 182  
183 -1. LA66 LoRaWAN Shield
184 -1. Arduino
185 -1. USB TO TTL Adapter
164 +== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
186 186  
187 -[[image:image-20220602100052-2.png||height="385" width="600"]]
188 188  
167 +(% style="color:blue" %)**1.  Open project**
189 189  
190 -=== 2.8.2  Connection ===
191 191  
170 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0>>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
192 192  
193 -[[image:image-20220602101311-3.png||height="276" width="600"]]
194 194  
173 +[[image:image-20220723173341-10.png||height="581" width="1014"]]
195 195  
196 -(((
197 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
198 -)))
199 199  
200 -(((
201 -(% style="background-color:yellow" %)**GND  <-> GND
202 -TXD  <->  TXD
203 -RXD  <->  RXD**
204 -)))
205 205  
177 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
206 206  
207 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
208 208  
209 -Connect USB TTL Adapter to PC after connecting the wires
180 +[[image:image-20220723173950-11.png||height="665" width="1012"]]
210 210  
211 211  
212 -[[image:image-20220602102240-4.png||height="304" width="600"]]
213 213  
214 214  
215 -=== 2.8.3  Upgrade steps ===
216 216  
186 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
217 217  
218 -==== 1.  Switch SW1 to put in ISP position ====
219 219  
189 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
220 220  
221 -[[image:image-20220602102824-5.png||height="306" width="600"]]
222 222  
192 +[[image:image-20220723175700-12.png||height="602" width="995"]]
223 223  
224 224  
225 -==== 2.  Press the RST switch once ====
195 +== 1.8  Example: How to join helium ==
226 226  
227 227  
228 -[[image:image-20220602104701-12.png||height="285" width="600"]]
198 +(% style="color:blue" %)**1.  Create a new device.**
229 229  
230 230  
201 +[[image:image-20220907165500-1.png||height="464" width="940"]]
231 231  
232 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
233 233  
234 234  
235 -(((
236 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
237 -)))
205 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
238 238  
239 239  
240 -[[image:image-20220602103227-6.png]]
208 +[[image:image-20220907165837-2.png||height="375" width="809"]]
241 241  
242 242  
243 -[[image:image-20220602103357-7.png]]
244 244  
212 +(% style="color:blue" %)**3.  Use AT commands.**
245 245  
246 246  
247 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
248 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
215 +[[image:image-20220602100052-2.png||height="385" width="600"]]
249 249  
250 250  
251 -[[image:image-20220602103844-8.png]]
252 252  
219 +(% style="color:#0000ff" %)**4.  Use command AT+CFG to get device configuration**
253 253  
254 254  
255 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
256 -(% style="color:blue" %)**3. Select the bin file to burn**
222 +[[image:image-20220907170308-3.png||height="556" width="617"]]
257 257  
258 258  
259 -[[image:image-20220602104144-9.png]]
260 260  
226 +(% style="color:blue" %)**5.  Network successfully.**
261 261  
262 -[[image:image-20220602104251-10.png]]
263 263  
229 +[[image:image-20220907170436-4.png]]
264 264  
265 -[[image:image-20220602104402-11.png]]
266 266  
267 267  
233 +(% style="color:blue" %)**6.  Send uplink using command**
268 268  
269 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
270 -(% style="color:blue" %)**4. Click to start the download**
271 271  
272 -[[image:image-20220602104923-13.png]]
236 +[[image:image-20220912084334-1.png]]
273 273  
274 274  
239 +[[image:image-20220912084412-3.png]]
275 275  
276 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
277 -(% style="color:blue" %)**5. Check update process**
278 278  
279 279  
280 -[[image:image-20220602104948-14.png]]
243 +[[image:image-20220907170744-6.png||height="242" width="798"]]
281 281  
282 282  
246 +== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
283 283  
284 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
285 -(% style="color:blue" %)**The following picture shows that the burning is successful**
248 +=== 1.9.1  Items needed for update ===
286 286  
287 -[[image:image-20220602105251-15.png]]
288 288  
251 +1. LA66 LoRaWAN Shield
252 +1. Arduino
253 +1. USB TO TTL Adapter
289 289  
255 +[[image:image-20220602100052-2.png||height="385" width="600"]]
290 290  
291 -= 3.  LA66 USB LoRaWAN Adapter =
292 292  
258 +=== 1.9.2  Connection ===
293 293  
294 -== 3.1  Overview ==
295 295  
296 -[[image:image-20220715001142-3.png||height="145" width="220"]]
261 +[[image:image-20220602101311-3.png||height="276" width="600"]]
297 297  
298 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
299 299  
300 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
264 +(((
265 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
266 +)))
301 301  
302 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
268 +(((
269 +(% style="background-color:yellow" %)**GND  <-> GND
270 +TXD  <->  TXD
271 +RXD  <->  RXD**
272 +)))
303 303  
304 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
305 305  
306 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
275 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
307 307  
277 +Connect USB TTL Adapter to PC after connecting the wires
308 308  
309 -== 3.2  Features ==
310 310  
311 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
312 -* Ultra-long RF range
313 -* Support LoRaWAN v1.0.4 protocol
314 -* Support peer-to-peer protocol
315 -* TCXO crystal to ensure RF performance on low temperature
316 -* Spring RF antenna
317 -* Available in different frequency LoRaWAN frequency bands.
318 -* World-wide unique OTAA keys.
319 -* AT Command via UART-TTL interface
320 -* Firmware upgradable via UART interface
321 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
280 +[[image:image-20220602102240-4.png||height="304" width="600"]]
322 322  
323 -== 3.3  Specification ==
324 324  
325 -* CPU: 32-bit 48 MHz
326 -* Flash: 256KB
327 -* RAM: 64KB
328 -* Input Power Range: 5v
329 -* Frequency Range: 150 MHz ~~ 960 MHz
330 -* Maximum Power +22 dBm constant RF output
331 -* High sensitivity: -148 dBm
332 -* Temperature:
333 -** Storage: -55 ~~ +125℃
334 -** Operating: -40 ~~ +85℃
335 -* Humidity:
336 -** Storage: 5 ~~ 95% (Non-Condensing)
337 -** Operating: 10 ~~ 95% (Non-Condensing)
338 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
339 -* LoRa Rx current: <9 mA
283 +=== 1.9.3  Upgrade steps ===
340 340  
341 -== 3.4  Pin Mapping & LED ==
342 342  
286 +==== (% style="color:blue" %)**1.  Switch SW1 to put in ISP position**(%%) ====
343 343  
344 344  
345 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
289 +[[image:image-20220602102824-5.png||height="306" width="600"]]
346 346  
347 347  
348 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
349 349  
293 +==== (% style="color:blue" %)**2.  Press the RST switch once**(%%) ====
350 350  
351 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
352 352  
296 +[[image:image-20220817085447-1.png]]
353 353  
354 -[[image:image-20220602171217-1.png||height="538" width="800"]]
355 355  
356 356  
357 -Open the serial port tool
300 +==== (% style="color:blue" %)**3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade**(%%) ====
358 358  
359 -[[image:image-20220602161617-8.png]]
360 360  
361 -[[image:image-20220602161718-9.png||height="457" width="800"]]
303 +(((
304 +(% style="color:blue" %)**1.  Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
305 +)))
362 362  
363 363  
308 +[[image:image-20220602103227-6.png]]
364 364  
365 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
366 366  
367 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
311 +[[image:image-20220602103357-7.png]]
368 368  
369 369  
370 -[[image:image-20220602161935-10.png||height="498" width="800"]]
371 371  
315 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
316 +(% style="color:blue" %)**2.  Select the COM port corresponding to USB TTL**
372 372  
373 373  
374 -(% style="color:blue" %)**3. See Uplink Command**
319 +[[image:image-20220602103844-8.png]]
375 375  
376 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
377 377  
378 -example: AT+SENDB=01,02,8,05820802581ea0a5
379 379  
380 -[[image:image-20220602162157-11.png||height="497" width="800"]]
323 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
324 +(% style="color:blue" %)**3.  Select the bin file to burn**
381 381  
382 382  
327 +[[image:image-20220602104144-9.png]]
383 383  
384 -(% style="color:blue" %)**4. Check to see if TTN received the message**
385 385  
386 -[[image:image-20220602162331-12.png||height="420" width="800"]]
330 +[[image:image-20220602104251-10.png]]
387 387  
388 388  
333 +[[image:image-20220602104402-11.png]]
389 389  
390 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
391 391  
392 392  
393 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
337 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
338 +(% style="color:blue" %)**4.  Click to start the download**
394 394  
395 395  
396 -(% style="color:red" %)**Preconditions:**
341 +[[image:image-20220602104923-13.png]]
397 397  
398 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
399 399  
400 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
401 401  
345 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
346 +(% style="color:blue" %)**5.  Check update process**
402 402  
403 403  
404 -(% style="color:blue" %)**Steps for usage:**
349 +[[image:image-20220602104948-14.png]]
405 405  
406 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
407 407  
408 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
409 409  
410 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
353 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
354 +(% style="color:blue" %)**The following picture shows that the burning is successful**
411 411  
412 412  
357 +[[image:image-20220602105251-15.png]]
413 413  
414 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
415 415  
360 += 2.  FAQ =
416 416  
417 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
362 +== 2.1  How to Compile Source Code for LA66? ==
418 418  
419 419  
420 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
365 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
421 421  
422 -[[image:image-20220602171233-2.png||height="538" width="800"]]
423 423  
368 +== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
424 424  
425 425  
426 -(% style="color:blue" %)**2. Install Minicom in RPi.**
371 +Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:.Instruction for LA66 Peer to Peer firmware.WebHome]]
427 427  
428 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
429 429  
430 - (% style="background-color:yellow" %)**apt update**
374 += 3.  Order Info =
431 431  
432 - (% style="background-color:yellow" %)**apt install minicom**
433 433  
377 +**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
434 434  
435 -Use minicom to connect to the RPI's terminal
379 +(% style="color:blue" %)**XXX**(%%): The default frequency band
436 436  
437 -[[image:image-20220602153146-3.png||height="439" width="500"]]
381 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
382 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
383 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
384 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
385 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
386 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
387 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
388 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
389 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
438 438  
439 439  
440 440  
441 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
393 += 4.  Reference =
442 442  
443 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
444 444  
396 +* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
445 445  
446 -[[image:image-20220602154928-5.png||height="436" width="500"]]
447 447  
448 448  
400 += 5.  FCC Statement =
449 449  
450 -(% style="color:blue" %)**4. Send Uplink message**
451 451  
452 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
403 +(% style="color:red" %)**FCC Caution:**
453 453  
454 -example: AT+SENDB=01,02,8,05820802581ea0a5
405 +Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
455 455  
407 +This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
456 456  
457 -[[image:image-20220602160339-6.png||height="517" width="600"]]
458 458  
410 +(% style="color:red" %)**IMPORTANT NOTE: **
459 459  
412 +(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
460 460  
461 -Check to see if TTN received the message
414 +—Reorient or relocate the receiving antenna.
462 462  
463 -[[image:image-20220602160627-7.png||height="369" width="800"]]
416 +—Increase the separation between the equipment and receiver.
464 464  
418 +—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
465 465  
420 +—Consult the dealer or an experienced radio/TV technician for help.
466 466  
467 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
468 468  
423 +(% style="color:red" %)**FCC Radiation Exposure Statement: **
469 469  
425 +This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. 
470 470  
471 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
472 -
473 -
474 -
475 -
476 -= 4.  Order Info =
477 -
478 -
479 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
480 -
481 -
482 -(% style="color:blue" %)**XXX**(%%): The default frequency band
483 -
484 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
485 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
486 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
487 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
488 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
489 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
490 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
491 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
492 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
493 -
494 -= 5.  Reference =
495 -
496 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
497 -
498 498  
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +44.5 KB
Content
image-20220912084334-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912084352-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content
image-20220912084412-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0