Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 93.2 >
edited by Xiaoling
on 2022/07/15 14:35
To version < 166.2 >
edited by Xiaoling
on 2022/11/14 11:41
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 LoRaWAN Shield User Manual
Content
... ... @@ -6,41 +6,59 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
10 += 1.  LA66 LoRaWAN Shield =
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
13 13  
13 +== 1.1  Overview ==
14 14  
15 +
15 15  (((
16 -[[image:image-20220715000242-1.png||height="110" width="132"]]
17 +[[image:image-20220715000826-2.png||height="145" width="220"]]
18 +)))
17 17  
18 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
20 +(((
21 +
19 19  )))
20 20  
21 21  (((
22 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
25 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
23 23  )))
24 24  
25 25  (((
29 +(((
30 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 +)))
32 +)))
33 +
34 +(((
35 +(((
26 26  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
27 27  )))
38 +)))
28 28  
29 29  (((
41 +(((
30 30  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
31 31  )))
44 +)))
32 32  
33 33  (((
47 +(((
34 34  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
35 35  )))
50 +)))
36 36  
37 37  
53 +
38 38  == 1.2  Features ==
39 39  
40 -* Support LoRaWAN v1.0.4 protocol
56 +
57 +* Arduino Shield base on LA66 LoRaWAN module
58 +* Support LoRaWAN v1.0.3 protocol
41 41  * Support peer-to-peer protocol
42 42  * TCXO crystal to ensure RF performance on low temperature
43 -* SMD Antenna pad and i-pex antenna connector
61 +* SMA connector
44 44  * Available in different frequency LoRaWAN frequency bands.
45 45  * World-wide unique OTAA keys.
46 46  * AT Command via UART-TTL interface
... ... @@ -51,6 +51,7 @@
51 51  
52 52  == 1.3  Specification ==
53 53  
72 +
54 54  * CPU: 32-bit 48 MHz
55 55  * Flash: 256KB
56 56  * RAM: 64KB
... ... @@ -71,432 +71,355 @@
71 71  
72 72  
73 73  
74 -== 1.4  AT Command ==
93 +== 1.4  Pin Mapping & LED ==
75 75  
76 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
77 77  
96 +[[image:image-20220817085048-1.png||height="533" width="734"]]
78 78  
79 -== 1.5  Dimension ==
80 80  
81 -[[image:image-20220517072526-1.png]]
82 82  
100 +~1. The LED lights up red when there is an upstream data packet
101 +2. When the network is successfully connected, the green light will be on for 5 seconds
102 +3. Purple light on when receiving downlink data packets
83 83  
84 84  
85 -== 1.6  Pin Mapping ==
105 +[[image:image-20220820112305-1.png||height="515" width="749"]]
86 86  
87 87  
88 -[[image:image-20220523101537-1.png]]
89 89  
109 +== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
90 90  
91 91  
92 -== 1.7  Land Pattern ==
112 +**Show connection diagram：**
93 93  
94 -[[image:image-20220517072821-2.png]]
95 95  
115 +[[image:image-20220723170210-2.png||height="908" width="681"]]
96 96  
97 97  
98 -= 2.  LA66 LoRaWAN Shield =
99 99  
119 +(% style="color:blue" %)**1.  open Arduino IDE**
100 100  
101 -== 2.1  Overview ==
102 102  
122 +[[image:image-20220723170545-4.png]]
103 103  
104 -[[image:image-20220715000826-2.png||height="386" width="449"]]
105 105  
106 106  
107 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
126 +(% style="color:blue" %)**2.  Open project**
108 108  
109 -(((
110 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
111 -)))
112 112  
113 -(((
114 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
115 -)))
129 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
116 116  
117 -(((
118 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
119 -)))
131 +[[image:image-20220726135239-1.png]]
120 120  
121 -(((
122 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
123 -)))
124 124  
125 125  
126 -== 2.2  Features ==
135 +(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
127 127  
128 -* Arduino Shield base on LA66 LoRaWAN module
129 -* Support LoRaWAN v1.0.4 protocol
130 -* Support peer-to-peer protocol
131 -* TCXO crystal to ensure RF performance on low temperature
132 -* SMA connector
133 -* Available in different frequency LoRaWAN frequency bands.
134 -* World-wide unique OTAA keys.
135 -* AT Command via UART-TTL interface
136 -* Firmware upgradable via UART interface
137 -* Ultra-long RF range
138 138  
138 +[[image:image-20220726135356-2.png]]
139 139  
140 140  
141 -== 2.3  Specification ==
142 142  
143 -* CPU: 32-bit 48 MHz
144 -* Flash: 256KB
145 -* RAM: 64KB
146 -* Input Power Range: 1.8v ~~ 3.7v
147 -* Power Consumption: < 4uA.
148 -* Frequency Range: 150 MHz ~~ 960 MHz
149 -* Maximum Power +22 dBm constant RF output
150 -* High sensitivity: -148 dBm
151 -* Temperature:
152 -** Storage: -55 ~~ +125℃
153 -** Operating: -40 ~~ +85℃
154 -* Humidity:
155 -** Storage: 5 ~~ 95% (Non-Condensing)
156 -** Operating: 10 ~~ 95% (Non-Condensing)
157 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
158 -* LoRa Rx current: <9 mA
159 -* I/O Voltage: 3.3v
142 +(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
160 160  
161 161  
145 +[[image:image-20220723172235-7.png||height="480" width="1027"]]
162 162  
163 -== 2.4  Pin Mapping & LED ==
164 164  
165 165  
149 +== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
166 166  
167 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
168 168  
152 +(% style="color:blue" %)**1.  Open project**
169 169  
170 170  
171 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
155 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
172 172  
173 173  
158 +[[image:image-20220723172502-8.png]]
174 174  
175 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
176 176  
177 177  
162 +(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
178 178  
179 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
180 180  
165 +[[image:image-20220723172938-9.png||height="652" width="1050"]]
181 181  
182 -=== 2.8.1  Items needed for update ===
183 183  
184 -1. LA66 LoRaWAN Shield
185 -1. Arduino
186 -1. USB TO TTL Adapter
187 187  
188 -[[image:image-20220602100052-2.png||height="385" width="600"]]
169 +== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
189 189  
190 190  
191 -=== 2.8.2  Connection ===
172 +(% style="color:blue" %)**1.  Open project**
192 192  
193 193  
194 -[[image:image-20220602101311-3.png||height="276" width="600"]]
175 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0>>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
195 195  
196 196  
197 -(((
198 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
199 -)))
178 +[[image:image-20220723173341-10.png||height="581" width="1014"]]
200 200  
201 -(((
202 -(% style="background-color:yellow" %)**GND  <-> GND
203 -TXD  <->  TXD
204 -RXD  <->  RXD**
205 -)))
206 206  
207 207  
208 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
182 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
209 209  
210 -Connect USB TTL Adapter to PC after connecting the wires
211 211  
185 +[[image:image-20220723173950-11.png||height="665" width="1012"]]
212 212  
213 -[[image:image-20220602102240-4.png||height="304" width="600"]]
214 214  
215 215  
216 -=== 2.8.3  Upgrade steps ===
217 217  
218 218  
219 -==== 1.  Switch SW1 to put in ISP position ====
191 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
220 220  
221 221  
222 -[[image:image-20220602102824-5.png||height="306" width="600"]]
194 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
223 223  
224 224  
197 +[[image:image-20220723175700-12.png||height="602" width="995"]]
225 225  
226 -==== 2.  Press the RST switch once ====
227 227  
228 228  
229 -[[image:image-20220602104701-12.png||height="285" width="600"]]
201 +== 1.8  Example: How to join helium ==
230 230  
231 231  
204 +(% style="color:blue" %)**1.  Create a new device.**
232 232  
233 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
234 234  
207 +[[image:image-20220907165500-1.png||height="464" width="940"]]
235 235  
236 -(((
237 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
238 -)))
239 239  
240 240  
241 -[[image:image-20220602103227-6.png]]
211 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
242 242  
243 243  
244 -[[image:image-20220602103357-7.png]]
214 +[[image:image-20220907165837-2.png||height="375" width="809"]]
245 245  
246 246  
247 247  
248 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
249 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
218 +(% style="color:blue" %)**3.  Use AT commands.**
250 250  
251 251  
252 -[[image:image-20220602103844-8.png]]
221 +[[image:image-20220602100052-2.png||height="385" width="600"]]
253 253  
254 254  
255 255  
256 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
257 -(% style="color:blue" %)**3. Select the bin file to burn**
225 +(% style="color:#0000ff" %)**4.  Use command AT+CFG to get device configuration**
258 258  
259 259  
260 -[[image:image-20220602104144-9.png]]
228 +[[image:image-20220907170308-3.png||height="556" width="617"]]
261 261  
262 262  
263 -[[image:image-20220602104251-10.png]]
264 264  
232 +(% style="color:blue" %)**5.  Network successfully.**
265 265  
266 -[[image:image-20220602104402-11.png]]
267 267  
235 +[[image:image-20220907170436-4.png]]
268 268  
269 269  
270 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
271 -(% style="color:blue" %)**4. Click to start the download**
272 272  
273 -[[image:image-20220602104923-13.png]]
239 +(% style="color:blue" %)**6.  Send uplink using command**
274 274  
275 275  
242 +[[image:image-20220912084334-1.png]]
276 276  
277 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
278 -(% style="color:blue" %)**5. Check update process**
279 279  
245 +[[image:image-20220912084412-3.png]]
280 280  
281 -[[image:image-20220602104948-14.png]]
282 282  
283 283  
249 +[[image:image-20220907170744-6.png||height="242" width="798"]]
284 284  
285 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
286 -(% style="color:blue" %)**The following picture shows that the burning is successful**
287 287  
288 -[[image:image-20220602105251-15.png]]
289 289  
253 +== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
290 290  
291 291  
292 -= 3.  LA66 USB LoRaWAN Adapter =
256 +=== 1.9.1  Items needed for update ===
293 293  
294 294  
295 -== 3.1  Overview ==
259 +1. LA66 LoRaWAN Shield
260 +1. Arduino
261 +1. USB TO TTL Adapter
296 296  
297 -[[image:image-20220715001142-3.png||height="145" width="220"]]
263 +[[image:image-20220602100052-2.png||height="385" width="600"]]
298 298  
299 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
300 300  
301 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
302 302  
303 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
267 +=== 1.9.2  Connection ===
304 304  
305 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
306 306  
307 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
270 +[[image:image-20220602101311-3.png||height="276" width="600"]]
308 308  
309 309  
310 -== 3.2  Features ==
273 +(((
274 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
275 +)))
311 311  
312 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
313 -* Ultra-long RF range
314 -* Support LoRaWAN v1.0.4 protocol
315 -* Support peer-to-peer protocol
316 -* TCXO crystal to ensure RF performance on low temperature
317 -* Spring RF antenna
318 -* Available in different frequency LoRaWAN frequency bands.
319 -* World-wide unique OTAA keys.
320 -* AT Command via UART-TTL interface
321 -* Firmware upgradable via UART interface
277 +(((
278 +(% style="background-color:yellow" %)**GND  <-> GND
279 +TXD  <->  TXD
280 +RXD  <->  RXD**
281 +)))
322 322  
323 323  
284 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
324 324  
325 -== 3.3  Specification ==
286 +Connect USB TTL Adapter to PC after connecting the wires
326 326  
327 -* CPU: 32-bit 48 MHz
328 -* Flash: 256KB
329 -* RAM: 64KB
330 -* Input Power Range: 5v
331 -* Frequency Range: 150 MHz ~~ 960 MHz
332 -* Maximum Power +22 dBm constant RF output
333 -* High sensitivity: -148 dBm
334 -* Temperature:
335 -** Storage: -55 ~~ +125℃
336 -** Operating: -40 ~~ +85℃
337 -* Humidity:
338 -** Storage: 5 ~~ 95% (Non-Condensing)
339 -** Operating: 10 ~~ 95% (Non-Condensing)
340 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
341 -* LoRa Rx current: <9 mA
342 342  
289 +[[image:image-20220602102240-4.png||height="304" width="600"]]
343 343  
344 344  
345 -== 3.4  Pin Mapping & LED ==
346 346  
293 +=== 1.9.3  Upgrade steps ===
347 347  
348 348  
349 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
350 350  
297 +==== (% style="color:blue" %)**1.  Switch SW1 to put in ISP position**(%%) ====
351 351  
352 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
353 353  
300 +[[image:image-20220602102824-5.png||height="306" width="600"]]
354 354  
355 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
356 356  
357 357  
358 -[[image:image-20220602171217-1.png||height="538" width="800"]]
359 359  
305 +==== (% style="color:blue" %)**2.  Press the RST switch once**(%%) ====
360 360  
361 -Open the serial port tool
362 362  
363 -[[image:image-20220602161617-8.png]]
308 +[[image:image-20220817085447-1.png]]
364 364  
365 -[[image:image-20220602161718-9.png||height="457" width="800"]]
366 366  
367 367  
368 368  
369 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
313 +==== (% style="color:blue" %)**3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade**(%%) ====
370 370  
371 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
372 372  
373 373  
374 -[[image:image-20220602161935-10.png||height="498" width="800"]]
317 +(((
318 +(% style="color:blue" %)**1.  Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
319 +)))
375 375  
376 376  
322 +[[image:image-20220602103227-6.png]]
377 377  
378 -(% style="color:blue" %)**3. See Uplink Command**
379 379  
380 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
325 +[[image:image-20220602103357-7.png]]
381 381  
382 -example: AT+SENDB=01,02,8,05820802581ea0a5
383 383  
384 -[[image:image-20220602162157-11.png||height="497" width="800"]]
385 385  
329 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
330 +(% style="color:blue" %)**2.  Select the COM port corresponding to USB TTL**
386 386  
387 387  
388 -(% style="color:blue" %)**4. Check to see if TTN received the message**
333 +[[image:image-20220602103844-8.png]]
389 389  
390 -[[image:image-20220602162331-12.png||height="420" width="800"]]
391 391  
392 392  
337 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
338 +(% style="color:blue" %)**3.  Select the bin file to burn**
393 393  
394 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
395 395  
341 +[[image:image-20220602104144-9.png]]
396 396  
397 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
398 398  
344 +[[image:image-20220602104251-10.png]]
399 399  
400 -(% style="color:red" %)**Preconditions:**
401 401  
402 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
347 +[[image:image-20220602104402-11.png]]
403 403  
404 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
405 405  
406 406  
351 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
352 +(% style="color:blue" %)**4.  Click to start the download**
407 407  
408 -(% style="color:blue" %)**Steps for usage:**
409 409  
410 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
355 +[[image:image-20220602104923-13.png]]
411 411  
412 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
413 413  
414 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
415 415  
359 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
360 +(% style="color:blue" %)**5.  Check update process**
416 416  
417 417  
418 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
363 +[[image:image-20220602104948-14.png]]
419 419  
420 420  
421 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
422 422  
367 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
368 +(% style="color:blue" %)**The following picture shows that the burning is successful**
423 423  
424 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
425 425  
426 -[[image:image-20220602171233-2.png||height="538" width="800"]]
371 +[[image:image-20220602105251-15.png]]
427 427  
428 428  
429 429  
430 -(% style="color:blue" %)**2. Install Minicom in RPi.**
375 += 2.  FAQ =
431 431  
432 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
433 433  
434 - (% style="background-color:yellow" %)**apt update**
378 +== 2.1  How to Compile Source Code for LA66? ==
435 435  
436 - (% style="background-color:yellow" %)**apt install minicom**
437 437  
381 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
438 438  
439 -Use minicom to connect to the RPI's terminal
440 440  
441 -[[image:image-20220602153146-3.png||height="439" width="500"]]
442 442  
385 +== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
443 443  
444 444  
445 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
388 +Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:.Instruction for LA66 Peer to Peer firmware.WebHome]]
446 446  
447 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
448 448  
449 449  
450 -[[image:image-20220602154928-5.png||height="436" width="500"]]
392 += 3.  Order Info =
451 451  
452 452  
395 +**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
453 453  
454 -(% style="color:blue" %)**4. Send Uplink message**
455 455  
456 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
398 +(% style="color:blue" %)**XXX**(%%): The default frequency band
457 457  
458 -example: AT+SENDB=01,02,8,05820802581ea0a5
400 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
401 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
402 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
403 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
404 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
405 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
406 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
407 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
408 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
459 459  
460 460  
461 -[[image:image-20220602160339-6.png||height="517" width="600"]]
462 462  
412 += 4.  Reference =
463 463  
464 464  
465 -Check to see if TTN received the message
415 +* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
466 466  
467 -[[image:image-20220602160627-7.png||height="369" width="800"]]
468 468  
469 469  
419 += 5.  FCC Statement =
470 470  
471 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
472 472  
422 +(% style="color:red" %)**FCC Caution:**
473 473  
424 +Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
474 474  
475 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
426 +This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
476 476  
477 477  
429 +(% style="color:red" %)**IMPORTANT NOTE: **
478 478  
431 +(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
479 479  
480 -= 4.  Order Info =
433 +—Reorient or relocate the receiving antenna.
481 481  
435 +—Increase the separation between the equipment and receiver.
482 482  
483 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
437 +—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
484 484  
439 +—Consult the dealer or an experienced radio/TV technician for help.
485 485  
486 -(% style="color:blue" %)**XXX**(%%): The default frequency band
487 487  
488 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
489 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
490 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
491 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
492 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
493 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
494 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
495 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
496 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
442 +(% style="color:red" %)**FCC Radiation Exposure Statement: **
497 497  
498 -= 5.  Reference =
499 -
500 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
501 -
502 -
444 +This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. 
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +44.5 KB
Content
image-20220912084334-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912084352-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content
image-20220912084412-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0