Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 91.1 >
edited by Edwin Chen
on 2022/07/15 00:10
To version < 159.1 >
edited by Bei Jinggeng
on 2022/09/07 17:13
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 LoRaWAN Shield User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Bei
Content
... ... @@ -6,123 +6,56 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
10 += 1.  LA66 LoRaWAN Shield =
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
13 13  
13 +== 1.1  Overview ==
14 14  
15 -(((
16 -[[image:image-20220715000242-1.png||height="110" width="132"]]
17 17  
18 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
19 -)))
20 -
21 21  (((
22 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
17 +[[image:image-20220715000826-2.png||height="145" width="220"]]
23 23  )))
24 24  
25 25  (((
26 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
21 +
27 27  )))
28 28  
29 29  (((
30 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
25 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
31 31  )))
32 32  
33 33  (((
34 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
35 -)))
36 -
37 -
38 -== 1.2  Features ==
39 -
40 -* Support LoRaWAN v1.0.4 protocol
41 -* Support peer-to-peer protocol
42 -* TCXO crystal to ensure RF performance on low temperature
43 -* SMD Antenna pad and i-pex antenna connector
44 -* Available in different frequency LoRaWAN frequency bands.
45 -* World-wide unique OTAA keys.
46 -* AT Command via UART-TTL interface
47 -* Firmware upgradable via UART interface
48 -* Ultra-long RF range
49 -
50 -== 1.3  Specification ==
51 -
52 -* CPU: 32-bit 48 MHz
53 -* Flash: 256KB
54 -* RAM: 64KB
55 -* Input Power Range: 1.8v ~~ 3.7v
56 -* Power Consumption: < 4uA.
57 -* Frequency Range: 150 MHz ~~ 960 MHz
58 -* Maximum Power +22 dBm constant RF output
59 -* High sensitivity: -148 dBm
60 -* Temperature:
61 -** Storage: -55 ~~ +125℃
62 -** Operating: -40 ~~ +85℃
63 -* Humidity:
64 -** Storage: 5 ~~ 95% (Non-Condensing)
65 -** Operating: 10 ~~ 95% (Non-Condensing)
66 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
67 -* LoRa Rx current: <9 mA
68 -* I/O Voltage: 3.3v
69 -
70 -== 1.4  AT Command ==
71 -
72 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
73 -
74 -
75 -== 1.5  Dimension ==
76 -
77 -[[image:image-20220517072526-1.png]]
78 -
79 -
80 -
81 -== 1.6  Pin Mapping ==
82 -
83 -
84 -[[image:image-20220523101537-1.png]]
85 -
86 -
87 -
88 -== 1.7  Land Pattern ==
89 -
90 -[[image:image-20220517072821-2.png]]
91 -
92 -
93 -
94 -= 2.  LA66 LoRaWAN Shield =
95 -
96 -
97 -== 2.1  Overview ==
98 -
99 -
100 -[[image:image-20220715000826-2.png||height="386" width="449"]]
101 -
102 -
103 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
104 -
105 105  (((
106 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
30 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
107 107  )))
32 +)))
108 108  
109 109  (((
35 +(((
110 110  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
111 111  )))
38 +)))
112 112  
113 113  (((
41 +(((
114 114  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
115 115  )))
44 +)))
116 116  
117 117  (((
47 +(((
118 118  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
119 119  )))
50 +)))
120 120  
121 121  
122 -== 2.2  Features ==
123 123  
54 +== 1.2  Features ==
55 +
56 +
124 124  * Arduino Shield base on LA66 LoRaWAN module
125 -* Support LoRaWAN v1.0.4 protocol
58 +* Support LoRaWAN v1.0.3 protocol
126 126  * Support peer-to-peer protocol
127 127  * TCXO crystal to ensure RF performance on low temperature
128 128  * SMA connector
... ... @@ -132,8 +132,9 @@
132 132  * Firmware upgradable via UART interface
133 133  * Ultra-long RF range
134 134  
135 -== 2.3  Specification ==
68 +== 1.3  Specification ==
136 136  
70 +
137 137  * CPU: 32-bit 48 MHz
138 138  * Flash: 256KB
139 139  * RAM: 64KB
... ... @@ -152,324 +152,285 @@
152 152  * LoRa Rx current: <9 mA
153 153  * I/O Voltage: 3.3v
154 154  
155 -== 2.4  Pin Mapping & LED ==
89 +== 1.4  Pin Mapping & LED ==
156 156  
157 157  
92 +[[image:image-20220817085048-1.png||height="533" width="734"]]
158 158  
159 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
160 160  
161 161  
96 +~1. The LED lights up red when there is an upstream data packet
97 +2. When the network is successfully connected, the green light will be on for 5 seconds
98 +3. Purple light on when receiving downlink data packets
162 162  
163 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
164 164  
101 +[[image:image-20220820112305-1.png||height="515" width="749"]]
165 165  
166 166  
167 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
168 168  
105 +== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
169 169  
170 170  
171 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
108 +**Show connection diagram：**
172 172  
173 173  
174 -=== 2.8.1  Items needed for update ===
111 +[[image:image-20220723170210-2.png||height="908" width="681"]]
175 175  
176 -1. LA66 LoRaWAN Shield
177 -1. Arduino
178 -1. USB TO TTL Adapter
179 179  
180 180  
181 -[[image:image-20220602100052-2.png||height="385" width="600"]]
115 +(% style="color:blue" %)**1.  open Arduino IDE**
182 182  
183 183  
184 -=== 2.8.2  Connection ===
118 +[[image:image-20220723170545-4.png]]
185 185  
186 186  
187 -[[image:image-20220602101311-3.png||height="276" width="600"]]
188 188  
122 +(% style="color:blue" %)**2.  Open project**
189 189  
190 -(((
191 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
192 -)))
193 193  
194 -(((
195 -(% style="background-color:yellow" %)**GND  <-> GND
196 -TXD  <->  TXD
197 -RXD  <->  RXD**
198 -)))
125 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
199 199  
200 200  
201 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
128 +[[image:image-20220726135239-1.png]]
202 202  
203 -Connect USB TTL Adapter to PC after connecting the wires
204 204  
205 205  
206 -[[image:image-20220602102240-4.png||height="304" width="600"]]
132 +(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
207 207  
208 208  
209 -=== 2.8.3  Upgrade steps ===
135 +[[image:image-20220726135356-2.png]]
210 210  
211 211  
212 -==== 1.  Switch SW1 to put in ISP position ====
213 213  
139 +(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
214 214  
215 -[[image:image-20220602102824-5.png||height="306" width="600"]]
216 216  
142 +[[image:image-20220723172235-7.png||height="480" width="1027"]]
217 217  
218 218  
219 -==== 2.  Press the RST switch once ====
220 220  
146 +== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
221 221  
222 -[[image:image-20220602104701-12.png||height="285" width="600"]]
223 223  
149 +(% style="color:blue" %)**1.  Open project**
224 224  
225 225  
226 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
152 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
227 227  
228 228  
229 -(((
230 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
231 -)))
155 +[[image:image-20220723172502-8.png]]
232 232  
233 233  
234 -[[image:image-20220602103227-6.png]]
235 235  
159 +(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
236 236  
237 -[[image:image-20220602103357-7.png]]
238 238  
162 +[[image:image-20220723172938-9.png||height="652" width="1050"]]
239 239  
240 240  
241 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
242 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
243 243  
166 +== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
244 244  
245 -[[image:image-20220602103844-8.png]]
246 246  
169 +(% style="color:blue" %)**1.  Open project**
247 247  
248 248  
249 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
250 -(% style="color:blue" %)**3. Select the bin file to burn**
172 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
251 251  
252 252  
253 -[[image:image-20220602104144-9.png]]
175 +[[image:image-20220723173341-10.png||height="581" width="1014"]]
254 254  
255 255  
256 -[[image:image-20220602104251-10.png]]
257 257  
179 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
258 258  
259 -[[image:image-20220602104402-11.png]]
260 260  
182 +[[image:image-20220723173950-11.png||height="665" width="1012"]]
261 261  
262 262  
263 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
264 -(% style="color:blue" %)**4. Click to start the download**
185 +LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
265 265  
266 -[[image:image-20220602104923-13.png]]
267 267  
268 268  
189 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
269 269  
270 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
271 -(% style="color:blue" %)**5. Check update process**
272 272  
192 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
273 273  
274 -[[image:image-20220602104948-14.png]]
275 275  
195 +[[image:image-20220723175700-12.png||height="602" width="995"]]
276 276  
197 +== 1.8 Example: How to join helium ==
277 277  
278 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
279 -(% style="color:blue" %)**The following picture shows that the burning is successful**
280 280  
281 -[[image:image-20220602105251-15.png]]
200 +(% style="color:blue" %)**1. Create a new device.**
282 282  
202 +[[image:image-20220907165500-1.png||height="464" width="940"]]
283 283  
284 284  
285 -= 3.  LA66 USB LoRaWAN Adapter =
205 +(% style="color:blue" %)**2. Save the device after filling in the necessary information.**
286 286  
207 +[[image:image-20220907165837-2.png||height="375" width="809"]]
287 287  
288 -== 3.1  Overview ==
289 289  
290 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
210 +(% style="color:blue" %)**3.  Use AT commands.**
291 291  
292 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
212 +[[image:image-20220602100052-2.png||height="385" width="600"]]
293 293  
294 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
295 295  
296 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
215 +(% style="color:#0000ff" %)**4.Use command AT+CFG to get device configuration**
297 297  
298 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
217 +[[image:image-20220907170308-3.png||height="556" width="617"]]
299 299  
300 300  
301 -== 3.2  Features ==
220 +(% style="color:blue" %)**5.  Network successfully.**
302 302  
303 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
304 -* Ultra-long RF range
305 -* Support LoRaWAN v1.0.4 protocol
306 -* Support peer-to-peer protocol
307 -* TCXO crystal to ensure RF performance on low temperature
308 -* Spring RF antenna
309 -* Available in different frequency LoRaWAN frequency bands.
310 -* World-wide unique OTAA keys.
311 -* AT Command via UART-TTL interface
312 -* Firmware upgradable via UART interface
222 +[[image:image-20220907170436-4.png]]
313 313  
314 -== 3.3  Specification ==
315 315  
316 -* CPU: 32-bit 48 MHz
317 -* Flash: 256KB
318 -* RAM: 64KB
319 -* Input Power Range: 5v
320 -* Frequency Range: 150 MHz ~~ 960 MHz
321 -* Maximum Power +22 dBm constant RF output
322 -* High sensitivity: -148 dBm
323 -* Temperature:
324 -** Storage: -55 ~~ +125℃
325 -** Operating: -40 ~~ +85℃
326 -* Humidity:
327 -** Storage: 5 ~~ 95% (Non-Condensing)
328 -** Operating: 10 ~~ 95% (Non-Condensing)
329 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
330 -* LoRa Rx current: <9 mA
225 +(% style="color:blue" %)**6.  Send uplink using command**
331 331  
332 -== 3.4  Pin Mapping & LED ==
227 +[[image:image-20220907170659-5.png]]
333 333  
229 +[[image:image-20220907170744-6.png||height="242" width="798"]]
334 334  
335 335  
336 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
232 +== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
337 337  
338 338  
339 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
235 +=== 1.9.1  Items needed for update ===
340 340  
341 341  
342 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
238 +1. LA66 LoRaWAN Shield
239 +1. Arduino
240 +1. USB TO TTL Adapter
343 343  
242 +[[image:image-20220602100052-2.png||height="385" width="600"]]
344 344  
345 -[[image:image-20220602171217-1.png||height="538" width="800"]]
346 346  
347 347  
348 -Open the serial port tool
246 +=== 1.9.2  Connection ===
349 349  
350 -[[image:image-20220602161617-8.png]]
351 351  
352 -[[image:image-20220602161718-9.png||height="457" width="800"]]
249 +[[image:image-20220602101311-3.png||height="276" width="600"]]
353 353  
354 354  
252 +(((
253 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
254 +)))
355 355  
356 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
256 +(((
257 +(% style="background-color:yellow" %)**GND  <-> GND
258 +TXD  <->  TXD
259 +RXD  <->  RXD**
260 +)))
357 357  
358 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
359 359  
263 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
360 360  
361 -[[image:image-20220602161935-10.png||height="498" width="800"]]
265 +Connect USB TTL Adapter to PC after connecting the wires
362 362  
363 363  
268 +[[image:image-20220602102240-4.png||height="304" width="600"]]
364 364  
365 -(% style="color:blue" %)**3. See Uplink Command**
366 366  
367 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
368 368  
369 -example: AT+SENDB=01,02,8,05820802581ea0a5
272 +=== 1.9.3  Upgrade steps ===
370 370  
371 -[[image:image-20220602162157-11.png||height="497" width="800"]]
372 372  
373 373  
276 +==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
374 374  
375 -(% style="color:blue" %)**4. Check to see if TTN received the message**
376 376  
377 -[[image:image-20220602162331-12.png||height="420" width="800"]]
279 +[[image:image-20220602102824-5.png||height="306" width="600"]]
378 378  
379 379  
380 380  
381 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
283 +==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
382 382  
383 383  
384 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
286 +[[image:image-20220817085447-1.png]]
385 385  
386 386  
387 -(% style="color:red" %)**Preconditions:**
388 388  
389 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
390 390  
391 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
291 +==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
392 392  
393 393  
294 +(((
295 +(% style="color:blue" %)**1. Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
296 +)))
394 394  
395 -(% style="color:blue" %)**Steps for usage:**
396 396  
397 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
299 +[[image:image-20220602103227-6.png]]
398 398  
399 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
400 400  
401 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
302 +[[image:image-20220602103357-7.png]]
402 402  
403 403  
404 404  
405 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
306 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
307 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
406 406  
407 407  
408 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
310 +[[image:image-20220602103844-8.png]]
409 409  
410 410  
411 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
412 412  
413 -[[image:image-20220602171233-2.png||height="538" width="800"]]
314 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
315 +(% style="color:blue" %)**3. Select the bin file to burn**
414 414  
415 415  
318 +[[image:image-20220602104144-9.png]]
416 416  
417 -(% style="color:blue" %)**2. Install Minicom in RPi.**
418 418  
419 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
321 +[[image:image-20220602104251-10.png]]
420 420  
421 - (% style="background-color:yellow" %)**apt update**
422 422  
423 - (% style="background-color:yellow" %)**apt install minicom**
324 +[[image:image-20220602104402-11.png]]
424 424  
425 425  
426 -Use minicom to connect to the RPI's terminal
427 427  
428 -[[image:image-20220602153146-3.png||height="439" width="500"]]
328 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
329 +(% style="color:blue" %)**4. Click to start the download**
429 429  
430 430  
332 +[[image:image-20220602104923-13.png]]
431 431  
432 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
433 433  
434 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
435 435  
336 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
337 +(% style="color:blue" %)**5. Check update process**
436 436  
437 -[[image:image-20220602154928-5.png||height="436" width="500"]]
438 438  
340 +[[image:image-20220602104948-14.png]]
439 439  
440 440  
441 -(% style="color:blue" %)**4. Send Uplink message**
442 442  
443 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
344 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
345 +(% style="color:blue" %)**The following picture shows that the burning is successful**
444 444  
445 -example: AT+SENDB=01,02,8,05820802581ea0a5
446 446  
348 +[[image:image-20220602105251-15.png]]
447 447  
448 -[[image:image-20220602160339-6.png||height="517" width="600"]]
449 449  
450 450  
352 += 2.  FAQ =
451 451  
452 -Check to see if TTN received the message
453 453  
454 -[[image:image-20220602160627-7.png||height="369" width="800"]]
355 +== 2.1  How to Compile Source Code for LA66? ==
455 455  
456 456  
358 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
457 457  
458 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
459 459  
460 460  
362 += 3.  Order Info =
461 461  
462 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
463 463  
365 +**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
464 464  
465 465  
466 -
467 -= 4.  Order Info =
468 -
469 -
470 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
471 -
472 -
473 473  (% style="color:blue" %)**XXX**(%%): The default frequency band
474 474  
475 475  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -482,8 +482,10 @@
482 482  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
483 483  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
484 484  
485 -= 5.  Reference =
486 486  
487 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
381 += 4.  Reference =
488 488  
383 +
384 +* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
385 +
489 489  
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +44.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0