Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 87.9 >
edited by Xiaoling
on 2022/07/13 10:02
To version < 9.1 >
edited by Edwin Chen
on 2022/05/17 23:16
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,447 +1,96 @@
1 -
2 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
3 3  {{toc/}}
3 +{{/box}}
4 4  
5 += LA66 LoRaWAN Module =
5 5  
7 +== What is LA66 LoRaWAN Module ==
6 6  
7 -= 1.  LA66 LoRaWAN Module =
9 +**Dragino LA66** is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRa and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.
8 8  
11 +**LA66 **is a ready-to-use module which includes the LoRaWAN v1.0.4 protocol. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
9 9  
10 -== 1.1  What is LA66 LoRaWAN Module ==
13 +**Each LA66 **module includes a world unique OTAA key for LoRaWAN registration.
11 11  
12 12  
13 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
14 14  
15 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
17 +== Specification ==
16 16  
17 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
19 +[[image:image-20220517072526-1.png]]
18 18  
19 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
21 +Input Power Range: 1.8v ~~ 3.7v
20 20  
21 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
23 +Power Consumption: < 4uA.
22 22  
25 +Frequency Range: 150 MHz ~~ 960 MHz
23 23  
24 -== 1.2  Features ==
27 +Maximum Power +22 dBm constant RF output
25 25  
26 -* Support LoRaWAN v1.0.4 protocol
27 -* Support peer-to-peer protocol
28 -* TCXO crystal to ensure RF performance on low temperature
29 -* SMD Antenna pad and i-pex antenna connector
30 -* Available in different frequency LoRaWAN frequency bands.
31 -* World-wide unique OTAA keys.
32 -* AT Command via UART-TTL interface
33 -* Firmware upgradable via UART interface
34 -* Ultra-long RF range
29 +High sensitivity: -148 dBm
35 35  
31 +Temperature:
36 36  
33 +* Storage: -55 ~~ +125℃
34 +* Operating: -40 ~~ +85℃
37 37  
38 -== 1.3  Specification ==
36 +Humidity:
39 39  
40 -* CPU: 32-bit 48 MHz
41 -* Flash: 256KB
42 -* RAM: 64KB
43 -* Input Power Range: 1.8v ~~ 3.7v
44 -* Power Consumption: < 4uA.
45 -* Frequency Range: 150 MHz ~~ 960 MHz
46 -* Maximum Power +22 dBm constant RF output
47 -* High sensitivity: -148 dBm
48 -* Temperature:
49 -** Storage: -55 ~~ +125℃
50 -** Operating: -40 ~~ +85℃
51 -* Humidity:
52 -** Storage: 5 ~~ 95% (Non-Condensing)
53 -** Operating: 10 ~~ 95% (Non-Condensing)
54 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
55 -* LoRa Rx current: <9 mA
56 -* I/O Voltage: 3.3v
38 +* Storage: 5 ~~ 95% (Non-Condensing)
39 +* Operating: 10 ~~ 95% (Non-Condensing)
57 57  
41 +LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
58 58  
43 +LoRa Rx current: <9 mA
59 59  
60 -== 1.4  AT Command ==
45 +I/O Voltage: 3.3v
61 61  
62 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
63 63  
48 +== AT Command ==
64 64  
65 -== 1.5  Dimension ==
50 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
66 66  
67 -[[image:image-20220517072526-1.png]]
68 68  
53 +== Pin Mapping ==
69 69  
70 70  
71 -== 1.6  Pin Mapping ==
56 +== Land Pattern ==
72 72  
73 -
74 -[[image:image-20220523101537-1.png]]
75 -
76 -
77 -
78 -== 1.7  Land Pattern ==
79 -
80 80  [[image:image-20220517072821-2.png]]
81 81  
82 82  
61 +== Part Number ==
83 83  
84 -= 2.  LA66 LoRaWAN Shield =
63 +Part Number: **LA66-XXX**
85 85  
65 +**XX**: The default frequency band
86 86  
87 -== 2.1  Overview ==
67 +* **AS923**: LoRaWAN AS923 band
68 +* **AU915**: LoRaWAN AU915 band
69 +* **EU433**: LoRaWAN EU433 band
70 +* **EU868**: LoRaWAN EU868 band
71 +* **KR920**: LoRaWAN KR920 band
72 +* **US915**: LoRaWAN US915 band
73 +* **IN865**: LoRaWAN IN865 band
74 +* **CN470**: LoRaWAN CN470 band
88 88  
89 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
76 += LA66 LoRaWAN Shield =
90 90  
78 +LA66 LoRaWAN Shield is the Arduino Breakout PCB to fast test the features of LA66 module and turn Arduino to support LoRaWAN.
91 91  
92 -== 2.2  Features ==
93 93  
94 -* Arduino Shield base on LA66 LoRaWAN module
95 -* Support LoRaWAN v1.0.4 protocol
96 -* Support peer-to-peer protocol
97 -* TCXO crystal to ensure RF performance on low temperature
98 -* SMA connector
99 -* Available in different frequency LoRaWAN frequency bands.
100 -* World-wide unique OTAA keys.
101 -* AT Command via UART-TTL interface
102 -* Firmware upgradable via UART interface
103 -* Ultra-long RF range
81 += LA66 USB LoRaWAN Adapter =
104 104  
83 +LA66 USB LoRaWAN Adapter is the USB Adapter for LA66, it combines a USB TTL Chip and LA66 module which can easy to test the LoRaWAN feature by using PC or embedded device which has USB Interface.
105 105  
106 106  
107 -== 2.3  Specification ==
86 +== Install USB Driver ==
108 108  
109 -* CPU: 32-bit 48 MHz
110 -* Flash: 256KB
111 -* RAM: 64KB
112 -* Input Power Range: 1.8v ~~ 3.7v
113 -* Power Consumption: < 4uA.
114 -* Frequency Range: 150 MHz ~~ 960 MHz
115 -* Maximum Power +22 dBm constant RF output
116 -* High sensitivity: -148 dBm
117 -* Temperature:
118 -** Storage: -55 ~~ +125℃
119 -** Operating: -40 ~~ +85℃
120 -* Humidity:
121 -** Storage: 5 ~~ 95% (Non-Condensing)
122 -** Operating: 10 ~~ 95% (Non-Condensing)
123 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
124 -* LoRa Rx current: <9 mA
125 -* I/O Voltage: 3.3v
126 126  
89 +== Send & Get Message via LoRaWAN ==
127 127  
91 +=== Install Minicom ===
128 128  
129 -== 2.4  Pin Mapping & LED ==
130 130  
94 +Example: LA66 USB Module got message from LA66 LoRa Shield and send the sensor data to NodeRed.
131 131  
132 -
133 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
134 -
135 -
136 -
137 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
138 -
139 -
140 -
141 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
142 -
143 -
144 -
145 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
146 -
147 -
148 -=== 2.8.1  Items needed for update ===
149 -
150 -1. LA66 LoRaWAN Shield
151 -1. Arduino
152 -1. USB TO TTL Adapter
153 -
154 -[[image:image-20220602100052-2.png||height="385" width="600"]]
155 -
156 -
157 -=== 2.8.2  Connection ===
158 -
159 -
160 -[[image:image-20220602101311-3.png||height="276" width="600"]]
161 -
162 -
163 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
164 -
165 -(% style="background-color:yellow" %)**GND  <-> GND
166 -TXD  <->  TXD
167 -RXD  <->  RXD**
168 -
169 -
170 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
171 -
172 -Connect USB TTL Adapter to PC after connecting the wires
173 -
174 -
175 -[[image:image-20220602102240-4.png||height="304" width="600"]]
176 -
177 -
178 -=== 2.8.3  Upgrade steps ===
179 -
180 -
181 -==== 1.  Switch SW1 to put in ISP position ====
182 -
183 -
184 -[[image:image-20220602102824-5.png||height="306" width="600"]]
185 -
186 -
187 -
188 -==== 2.  Press the RST switch once ====
189 -
190 -[[image:image-20220602104701-12.png||height="285" width="600"]]
191 -
192 -
193 -
194 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
195 -
196 -
197 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
198 -
199 -
200 -[[image:image-20220602103227-6.png]]
201 -
202 -
203 -[[image:image-20220602103357-7.png]]
204 -
205 -
206 -
207 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
208 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
209 -
210 -
211 -[[image:image-20220602103844-8.png]]
212 -
213 -
214 -
215 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
216 -(% style="color:blue" %)**3. Select the bin file to burn**
217 -
218 -
219 -[[image:image-20220602104144-9.png]]
220 -
221 -
222 -[[image:image-20220602104251-10.png]]
223 -
224 -
225 -[[image:image-20220602104402-11.png]]
226 -
227 -
228 -
229 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
230 -(% style="color:blue" %)**4. Click to start the download**
231 -
232 -[[image:image-20220602104923-13.png]]
233 -
234 -
235 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
236 -(% style="color:blue" %)**5. Check update process**
237 -
238 -
239 -[[image:image-20220602104948-14.png]]
240 -
241 -
242 -
243 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
244 -(% style="color:blue" %)**The following picture shows that the burning is successful**
245 -
246 -[[image:image-20220602105251-15.png]]
247 -
248 -
249 -
250 -= 3.  LA66 USB LoRaWAN Adapter =
251 -
252 -
253 -== 3.1  Overview ==
254 -
255 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
256 -
257 -
258 -== 3.2  Features ==
259 -
260 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
261 -* Ultra-long RF range
262 -* Support LoRaWAN v1.0.4 protocol
263 -* Support peer-to-peer protocol
264 -* TCXO crystal to ensure RF performance on low temperature
265 -* Spring RF antenna
266 -* Available in different frequency LoRaWAN frequency bands.
267 -* World-wide unique OTAA keys.
268 -* AT Command via UART-TTL interface
269 -* Firmware upgradable via UART interface
270 -
271 -== 3.3  Specification ==
272 -
273 -* CPU: 32-bit 48 MHz
274 -* Flash: 256KB
275 -* RAM: 64KB
276 -* Input Power Range: 5v
277 -* Frequency Range: 150 MHz ~~ 960 MHz
278 -* Maximum Power +22 dBm constant RF output
279 -* High sensitivity: -148 dBm
280 -* Temperature:
281 -** Storage: -55 ~~ +125℃
282 -** Operating: -40 ~~ +85℃
283 -* Humidity:
284 -** Storage: 5 ~~ 95% (Non-Condensing)
285 -** Operating: 10 ~~ 95% (Non-Condensing)
286 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
287 -* LoRa Rx current: <9 mA
288 -
289 -== 3.4  Pin Mapping & LED ==
290 -
291 -
292 -
293 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
294 -
295 -
296 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
297 -
298 -
299 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
300 -
301 -
302 -[[image:image-20220602171217-1.png||height="538" width="800"]]
303 -
304 -
305 -Open the serial port tool
306 -
307 -[[image:image-20220602161617-8.png]]
308 -
309 -[[image:image-20220602161718-9.png||height="457" width="800"]]
310 -
311 -
312 -
313 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
314 -
315 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
316 -
317 -
318 -[[image:image-20220602161935-10.png||height="498" width="800"]]
319 -
320 -
321 -
322 -(% style="color:blue" %)**3. See Uplink Command**
323 -
324 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
325 -
326 -example: AT+SENDB=01,02,8,05820802581ea0a5
327 -
328 -[[image:image-20220602162157-11.png||height="497" width="800"]]
329 -
330 -
331 -
332 -(% style="color:blue" %)**4. Check to see if TTN received the message**
333 -
334 -[[image:image-20220602162331-12.png||height="420" width="800"]]
335 -
336 -
337 -
338 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
339 -
340 -
341 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
342 -
343 -
344 -(% style="color:red" %)**Preconditions:**
345 -
346 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
347 -
348 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
349 -
350 -
351 -
352 -(% style="color:blue" %)**Steps for usage:**
353 -
354 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
355 -
356 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
357 -
358 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
359 -
360 -
361 -
362 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
363 -
364 -
365 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
366 -
367 -
368 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
369 -
370 -[[image:image-20220602171233-2.png||height="538" width="800"]]
371 -
372 -
373 -
374 -(% style="color:blue" %)**2. Install Minicom in RPi.**
375 -
376 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
377 -
378 - (% style="background-color:yellow" %)**apt update**
379 -
380 - (% style="background-color:yellow" %)**apt install minicom**
381 -
382 -
383 -Use minicom to connect to the RPI's terminal
384 -
385 -[[image:image-20220602153146-3.png||height="439" width="500"]]
386 -
387 -
388 -
389 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**(%%)
390 -(% style="color:blue" %)The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
391 -
392 -[[image:image-20220602154928-5.png||height="436" width="500"]]
393 -
394 -
395 -
396 -(% style="color:blue" %)**4. Send Uplink message**
397 -
398 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
399 -
400 -example: AT+SENDB=01,02,8,05820802581ea0a5
401 -
402 -
403 -[[image:image-20220602160339-6.png||height="517" width="600"]]
404 -
405 -
406 -
407 -Check to see if TTN received the message
408 -
409 -[[image:image-20220602160627-7.png||height="369" width="800"]]
410 -
411 -
412 -
413 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
414 -
415 -
416 -
417 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
418 -
419 -
420 -
421 -
422 -= 4.  Order Info =
423 -
424 -
425 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
426 -
427 -
428 -(% style="color:blue" %)**XXX**(%%): The default frequency band
429 -
430 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
431 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
432 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
433 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
434 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
435 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
436 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
437 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
438 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
439 -
440 -
441 -
442 -
443 -= 5.  Reference =
444 -
445 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
446 -
447 447  
CP210x_Universal_Windows_Driver.zip
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -265.0 KB
Content
image-20220523101537-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -147.3 KB
Content
image-20220602095820-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -853.7 KB
Content
image-20220602100052-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -681.9 KB
Content
image-20220602101311-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -1000.7 KB
Content
image-20220602102240-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220602102824-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -800.4 KB
Content
image-20220602103227-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -5.3 KB
Content
image-20220602103357-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -12.6 KB
Content
image-20220602103844-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -8.6 KB
Content
image-20220602104144-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -10.0 KB
Content
image-20220602104251-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -23.3 KB
Content
image-20220602104402-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -9.3 KB
Content
image-20220602104701-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -893.3 KB
Content
image-20220602104923-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -11.6 KB
Content
image-20220602104948-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -13.1 KB
Content
image-20220602105251-15.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -11.8 KB
Content
image-20220602114148-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -1.6 MB
Content
image-20220602114733-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -7.6 KB
Content
image-20220602115852-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -98.1 KB
Content
image-20220602143155-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -51.4 KB
Content
image-20220602143744-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -60.8 KB
Content
image-20220602153146-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -23.4 KB
Content
image-20220602153333-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -684.3 KB
Content
image-20220602154928-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -39.1 KB
Content
image-20220602160339-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -48.3 KB
Content
image-20220602160627-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -150.3 KB
Content
image-20220602161617-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -7.7 KB
Content
image-20220602161718-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -23.9 KB
Content
image-20220602161935-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -29.7 KB
Content
image-20220602162157-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -30.3 KB
Content
image-20220602162331-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -162.4 KB
Content
image-20220602171217-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -650.5 KB
Content
image-20220602171233-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -650.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0