Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 87.9 >
edited by Xiaoling
on 2022/07/13 10:02
To version < 151.1 >
edited by Edwin Chen
on 2022/08/20 11:23
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 LoRaWAN Shield User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,98 +1,61 @@
1 1  
2 2  
3 +**Table of Contents:**
4 +
3 3  {{toc/}}
4 4  
5 5  
6 6  
7 -= 1.  LA66 LoRaWAN Module =
8 8  
10 += 1.  LA66 LoRaWAN Shield =
9 9  
10 -== 1.1  What is LA66 LoRaWAN Module ==
11 11  
13 +== 1.1  Overview ==
12 12  
13 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
14 14  
15 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
16 +(((
17 +[[image:image-20220715000826-2.png||height="145" width="220"]]
18 +)))
16 16  
20 +(((
21 +
22 +)))
23 +
24 +(((
25 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 +)))
27 +
28 +(((
29 +(((
30 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 +)))
32 +)))
33 +
34 +(((
35 +(((
17 17  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 +)))
38 +)))
18 18  
40 +(((
41 +(((
19 19  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 +)))
44 +)))
20 20  
46 +(((
47 +(((
21 21  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
49 +)))
50 +)))
22 22  
23 23  
53 +
24 24  == 1.2  Features ==
25 25  
26 -* Support LoRaWAN v1.0.4 protocol
27 -* Support peer-to-peer protocol
28 -* TCXO crystal to ensure RF performance on low temperature
29 -* SMD Antenna pad and i-pex antenna connector
30 -* Available in different frequency LoRaWAN frequency bands.
31 -* World-wide unique OTAA keys.
32 -* AT Command via UART-TTL interface
33 -* Firmware upgradable via UART interface
34 -* Ultra-long RF range
35 35  
36 -
37 -
38 -== 1.3  Specification ==
39 -
40 -* CPU: 32-bit 48 MHz
41 -* Flash: 256KB
42 -* RAM: 64KB
43 -* Input Power Range: 1.8v ~~ 3.7v
44 -* Power Consumption: < 4uA.
45 -* Frequency Range: 150 MHz ~~ 960 MHz
46 -* Maximum Power +22 dBm constant RF output
47 -* High sensitivity: -148 dBm
48 -* Temperature:
49 -** Storage: -55 ~~ +125℃
50 -** Operating: -40 ~~ +85℃
51 -* Humidity:
52 -** Storage: 5 ~~ 95% (Non-Condensing)
53 -** Operating: 10 ~~ 95% (Non-Condensing)
54 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
55 -* LoRa Rx current: <9 mA
56 -* I/O Voltage: 3.3v
57 -
58 -
59 -
60 -== 1.4  AT Command ==
61 -
62 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
63 -
64 -
65 -== 1.5  Dimension ==
66 -
67 -[[image:image-20220517072526-1.png]]
68 -
69 -
70 -
71 -== 1.6  Pin Mapping ==
72 -
73 -
74 -[[image:image-20220523101537-1.png]]
75 -
76 -
77 -
78 -== 1.7  Land Pattern ==
79 -
80 -[[image:image-20220517072821-2.png]]
81 -
82 -
83 -
84 -= 2.  LA66 LoRaWAN Shield =
85 -
86 -
87 -== 2.1  Overview ==
88 -
89 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
90 -
91 -
92 -== 2.2  Features ==
93 -
94 94  * Arduino Shield base on LA66 LoRaWAN module
95 -* Support LoRaWAN v1.0.4 protocol
58 +* Support LoRaWAN v1.0.3 protocol
96 96  * Support peer-to-peer protocol
97 97  * TCXO crystal to ensure RF performance on low temperature
98 98  * SMA connector
... ... @@ -103,8 +103,8 @@
103 103  * Ultra-long RF range
104 104  
105 105  
69 +== 1.3  Specification ==
106 106  
107 -== 2.3  Specification ==
108 108  
109 109  * CPU: 32-bit 48 MHz
110 110  * Flash: 256KB
... ... @@ -125,306 +125,243 @@
125 125  * I/O Voltage: 3.3v
126 126  
127 127  
91 +== 1.4  Pin Mapping & LED ==
128 128  
129 -== 2.4  Pin Mapping & LED ==
130 130  
94 +[[image:image-20220817085048-1.png||height="533" width="734"]]
131 131  
132 132  
133 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
134 134  
98 +~1. The LED lights up red when there is an upstream data packet
99 +2. When the network is successfully connected, the green light will be on for 5 seconds
100 +3. Purple light on when receiving downlink data packets
135 135  
136 136  
137 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
103 +[[image:image-20220820112305-1.png||height="515" width="749"]]
138 138  
139 139  
140 140  
141 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
107 +== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
142 142  
143 143  
110 +**Show connection diagram：**
144 144  
145 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
146 146  
113 +[[image:image-20220723170210-2.png||height="908" width="681"]]
147 147  
148 -=== 2.8.1  Items needed for update ===
149 149  
150 -1. LA66 LoRaWAN Shield
151 -1. Arduino
152 -1. USB TO TTL Adapter
153 153  
154 -[[image:image-20220602100052-2.png||height="385" width="600"]]
117 +(% style="color:blue" %)**1.  open Arduino IDE**
155 155  
156 156  
157 -=== 2.8.2  Connection ===
120 +[[image:image-20220723170545-4.png]]
158 158  
159 159  
160 -[[image:image-20220602101311-3.png||height="276" width="600"]]
161 161  
124 +(% style="color:blue" %)**2.  Open project**
162 162  
163 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
164 164  
165 -(% style="background-color:yellow" %)**GND  <-> GND
166 -TXD  <->  TXD
167 -RXD  <->  RXD**
127 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
168 168  
129 +[[image:image-20220726135239-1.png]]
169 169  
170 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
171 171  
172 -Connect USB TTL Adapter to PC after connecting the wires
173 173  
133 +(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
174 174  
175 -[[image:image-20220602102240-4.png||height="304" width="600"]]
135 +[[image:image-20220726135356-2.png]]
176 176  
177 177  
178 -=== 2.8.3  Upgrade steps ===
179 179  
139 +(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
180 180  
181 -==== 1.  Switch SW1 to put in ISP position ====
182 182  
142 +[[image:image-20220723172235-7.png||height="480" width="1027"]]
183 183  
184 -[[image:image-20220602102824-5.png||height="306" width="600"]]
185 185  
186 186  
146 +== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
187 187  
188 -==== 2.  Press the RST switch once ====
189 189  
190 -[[image:image-20220602104701-12.png||height="285" width="600"]]
149 +(% style="color:blue" %)**1.  Open project**
191 191  
192 192  
152 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
193 193  
194 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
195 195  
155 +[[image:image-20220723172502-8.png]]
196 196  
197 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
198 198  
199 199  
200 -[[image:image-20220602103227-6.png]]
159 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
201 201  
202 202  
203 -[[image:image-20220602103357-7.png]]
162 +[[image:image-20220723172938-9.png||height="652" width="1050"]]
204 204  
205 205  
206 206  
207 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
208 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
166 +== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
209 209  
210 210  
211 -[[image:image-20220602103844-8.png]]
169 +(% style="color:blue" %)**1.  Open project**
212 212  
213 213  
172 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
214 214  
215 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
216 -(% style="color:blue" %)**3. Select the bin file to burn**
217 217  
175 +[[image:image-20220723173341-10.png||height="581" width="1014"]]
218 218  
219 -[[image:image-20220602104144-9.png]]
220 220  
221 221  
222 -[[image:image-20220602104251-10.png]]
179 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
223 223  
224 224  
225 -[[image:image-20220602104402-11.png]]
182 +[[image:image-20220723173950-11.png||height="665" width="1012"]]
226 226  
227 227  
228 228  
229 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
230 -(% style="color:blue" %)**4. Click to start the download**
186 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
231 231  
232 -[[image:image-20220602104923-13.png]]
188 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
233 233  
190 +[[image:image-20220723175700-12.png||height="602" width="995"]]
234 234  
235 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
236 -(% style="color:blue" %)**5. Check update process**
237 237  
238 238  
239 -[[image:image-20220602104948-14.png]]
194 +== 1.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
240 240  
241 241  
197 +=== 1.8.1  Items needed for update ===
242 242  
243 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
244 -(% style="color:blue" %)**The following picture shows that the burning is successful**
245 245  
246 -[[image:image-20220602105251-15.png]]
200 +1. LA66 LoRaWAN Shield
201 +1. Arduino
202 +1. USB TO TTL Adapter
247 247  
204 +[[image:image-20220602100052-2.png||height="385" width="600"]]
248 248  
249 249  
250 -= 3.  LA66 USB LoRaWAN Adapter =
251 251  
208 +=== 1.8.2  Connection ===
252 252  
253 -== 3.1  Overview ==
254 254  
255 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
211 +[[image:image-20220602101311-3.png||height="276" width="600"]]
256 256  
257 257  
258 -== 3.2  Features ==
214 +(((
215 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
216 +)))
259 259  
260 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
261 -* Ultra-long RF range
262 -* Support LoRaWAN v1.0.4 protocol
263 -* Support peer-to-peer protocol
264 -* TCXO crystal to ensure RF performance on low temperature
265 -* Spring RF antenna
266 -* Available in different frequency LoRaWAN frequency bands.
267 -* World-wide unique OTAA keys.
268 -* AT Command via UART-TTL interface
269 -* Firmware upgradable via UART interface
218 +(((
219 +(% style="background-color:yellow" %)**GND  <-> GND
220 +TXD  <->  TXD
221 +RXD  <->  RXD**
222 +)))
270 270  
271 -== 3.3  Specification ==
272 272  
273 -* CPU: 32-bit 48 MHz
274 -* Flash: 256KB
275 -* RAM: 64KB
276 -* Input Power Range: 5v
277 -* Frequency Range: 150 MHz ~~ 960 MHz
278 -* Maximum Power +22 dBm constant RF output
279 -* High sensitivity: -148 dBm
280 -* Temperature:
281 -** Storage: -55 ~~ +125℃
282 -** Operating: -40 ~~ +85℃
283 -* Humidity:
284 -** Storage: 5 ~~ 95% (Non-Condensing)
285 -** Operating: 10 ~~ 95% (Non-Condensing)
286 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
287 -* LoRa Rx current: <9 mA
225 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
288 288  
289 -== 3.4  Pin Mapping & LED ==
227 +Connect USB TTL Adapter to PC after connecting the wires
290 290  
291 291  
230 +[[image:image-20220602102240-4.png||height="304" width="600"]]
292 292  
293 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
294 294  
295 295  
296 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
234 +=== 1.8.3  Upgrade steps ===
297 297  
298 298  
299 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
300 300  
238 +==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
301 301  
302 -[[image:image-20220602171217-1.png||height="538" width="800"]]
303 303  
241 +[[image:image-20220602102824-5.png||height="306" width="600"]]
304 304  
305 -Open the serial port tool
306 306  
307 -[[image:image-20220602161617-8.png]]
308 308  
309 -[[image:image-20220602161718-9.png||height="457" width="800"]]
245 +==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
310 310  
311 311  
248 +[[image:image-20220817085447-1.png]]
312 312  
313 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
314 314  
315 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
316 316  
317 317  
318 -[[image:image-20220602161935-10.png||height="498" width="800"]]
253 +==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
319 319  
320 320  
256 +(((
257 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
258 +)))
321 321  
322 -(% style="color:blue" %)**3. See Uplink Command**
323 323  
324 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
261 +[[image:image-20220602103227-6.png]]
325 325  
326 -example: AT+SENDB=01,02,8,05820802581ea0a5
327 327  
328 -[[image:image-20220602162157-11.png||height="497" width="800"]]
264 +[[image:image-20220602103357-7.png]]
329 329  
330 330  
331 331  
332 -(% style="color:blue" %)**4. Check to see if TTN received the message**
268 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
269 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
333 333  
334 -[[image:image-20220602162331-12.png||height="420" width="800"]]
335 335  
272 +[[image:image-20220602103844-8.png]]
336 336  
337 337  
338 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
339 339  
276 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
277 +(% style="color:blue" %)**3. Select the bin file to burn**
340 340  
341 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
342 342  
280 +[[image:image-20220602104144-9.png]]
343 343  
344 -(% style="color:red" %)**Preconditions:**
345 345  
346 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
283 +[[image:image-20220602104251-10.png]]
347 347  
348 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
349 349  
286 +[[image:image-20220602104402-11.png]]
350 350  
351 351  
352 -(% style="color:blue" %)**Steps for usage:**
353 353  
354 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
290 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
291 +(% style="color:blue" %)**4. Click to start the download**
355 355  
356 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
293 +[[image:image-20220602104923-13.png]]
357 357  
358 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
359 359  
360 360  
297 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
298 +(% style="color:blue" %)**5. Check update process**
361 361  
362 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
363 363  
301 +[[image:image-20220602104948-14.png]]
364 364  
365 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
366 366  
367 367  
368 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
305 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
306 +(% style="color:blue" %)**The following picture shows that the burning is successful**
369 369  
370 -[[image:image-20220602171233-2.png||height="538" width="800"]]
308 +[[image:image-20220602105251-15.png]]
371 371  
372 372  
373 373  
374 -(% style="color:blue" %)**2. Install Minicom in RPi.**
312 += 2.  FAQ =
375 375  
376 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
377 377  
378 - (% style="background-color:yellow" %)**apt update**
315 +== 2.1  How to Compile Source Code for LA66? ==
379 379  
380 - (% style="background-color:yellow" %)**apt install minicom**
381 381  
318 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
382 382  
383 -Use minicom to connect to the RPI's terminal
384 384  
385 -[[image:image-20220602153146-3.png||height="439" width="500"]]
386 386  
322 += 3.  Order Info =
387 387  
388 388  
389 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**(%%)
390 -(% style="color:blue" %)The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
325 +**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
391 391  
392 -[[image:image-20220602154928-5.png||height="436" width="500"]]
393 393  
394 -
395 -
396 -(% style="color:blue" %)**4. Send Uplink message**
397 -
398 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
399 -
400 -example: AT+SENDB=01,02,8,05820802581ea0a5
401 -
402 -
403 -[[image:image-20220602160339-6.png||height="517" width="600"]]
404 -
405 -
406 -
407 -Check to see if TTN received the message
408 -
409 -[[image:image-20220602160627-7.png||height="369" width="800"]]
410 -
411 -
412 -
413 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
414 -
415 -
416 -
417 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
418 -
419 -
420 -
421 -
422 -= 4.  Order Info =
423 -
424 -
425 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
426 -
427 -
428 428  (% style="color:blue" %)**XXX**(%%): The default frequency band
429 429  
430 430  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -439,9 +439,9 @@
439 439  
440 440  
441 441  
342 += 4.  Reference =
442 442  
443 -= 5.  Reference =
444 444  
445 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
345 +* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
446 446  
447 447  
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +784.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0