Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 87.2 >
edited by Xiaoling
on 2022/07/13 09:34
To version < 151.2 >
edited by Xiaoling
on 2022/08/22 16:13
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 LoRaWAN Shield User Manual
Content
... ... @@ -1,36 +1,64 @@
1 1  
2 2  
3 -{{box cssClass="floatinginfobox" title="**Contents**"}}
4 -{{toc/}}
5 -{{/box}}
3 +**Table of Contents:**
6 6  
7 7  {{toc/}}
8 8  
9 9  
10 10  
11 -= 1.  LA66 LoRaWAN Module =
12 12  
10 += 1.  LA66 LoRaWAN Shield =
13 13  
14 -== 1.1  What is LA66 LoRaWAN Module ==
15 15  
13 +== 1.1  Overview ==
16 16  
17 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
18 18  
19 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
16 +(((
17 +[[image:image-20220715000826-2.png||height="145" width="220"]]
18 +)))
20 20  
20 +(((
21 +
22 +)))
23 +
24 +(((
25 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 +)))
27 +
28 +(((
29 +(((
30 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 +)))
32 +)))
33 +
34 +(((
35 +(((
21 21  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 +)))
38 +)))
22 22  
40 +(((
41 +(((
23 23  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 +)))
44 +)))
24 24  
46 +(((
47 +(((
25 25  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
49 +)))
50 +)))
26 26  
27 27  
53 +
28 28  == 1.2  Features ==
29 29  
30 -* Support LoRaWAN v1.0.4 protocol
56 +
57 +* Arduino Shield base on LA66 LoRaWAN module
58 +* Support LoRaWAN v1.0.3 protocol
31 31  * Support peer-to-peer protocol
32 32  * TCXO crystal to ensure RF performance on low temperature
33 -* SMD Antenna pad and i-pex antenna connector
61 +* SMA connector
34 34  * Available in different frequency LoRaWAN frequency bands.
35 35  * World-wide unique OTAA keys.
36 36  * AT Command via UART-TTL interface
... ... @@ -38,8 +38,11 @@
38 38  * Ultra-long RF range
39 39  
40 40  
69 +
70 +
41 41  == 1.3  Specification ==
42 42  
73 +
43 43  * CPU: 32-bit 48 MHz
44 44  * Flash: 256KB
45 45  * RAM: 64KB
... ... @@ -59,364 +59,265 @@
59 59  * I/O Voltage: 3.3v
60 60  
61 61  
62 -== 1.4  AT Command ==
63 63  
64 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
65 65  
95 +== 1.4  Pin Mapping & LED ==
66 66  
67 -== 1.5  Dimension ==
68 68  
69 -[[image:image-20220517072526-1.png]]
98 +[[image:image-20220817085048-1.png||height="533" width="734"]]
70 70  
71 71  
72 72  
73 -== 1.6  Pin Mapping ==
102 +~1. The LED lights up red when there is an upstream data packet
103 +2. When the network is successfully connected, the green light will be on for 5 seconds
104 +3. Purple light on when receiving downlink data packets
74 74  
75 75  
76 -[[image:image-20220523101537-1.png]]
107 +[[image:image-20220820112305-1.png||height="515" width="749"]]
77 77  
78 78  
79 79  
80 -== 1.7  Land Pattern ==
111 +== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
81 81  
82 -[[image:image-20220517072821-2.png]]
83 83  
114 +**Show connection diagram：**
84 84  
85 85  
86 -= 2.  LA66 LoRaWAN Shield =
117 +[[image:image-20220723170210-2.png||height="908" width="681"]]
87 87  
88 88  
89 -== 2.1  Overview ==
90 90  
91 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
121 +(% style="color:blue" %)**1.  open Arduino IDE**
92 92  
93 93  
94 -== 2.2  Features ==
124 +[[image:image-20220723170545-4.png]]
95 95  
96 -* Arduino Shield base on LA66 LoRaWAN module
97 -* Support LoRaWAN v1.0.4 protocol
98 -* Support peer-to-peer protocol
99 -* TCXO crystal to ensure RF performance on low temperature
100 -* SMA connector
101 -* Available in different frequency LoRaWAN frequency bands.
102 -* World-wide unique OTAA keys.
103 -* AT Command via UART-TTL interface
104 -* Firmware upgradable via UART interface
105 -* Ultra-long RF range
106 106  
107 107  
108 -== 2.3  Specification ==
128 +(% style="color:blue" %)**2.  Open project**
109 109  
110 -* CPU: 32-bit 48 MHz
111 -* Flash: 256KB
112 -* RAM: 64KB
113 -* Input Power Range: 1.8v ~~ 3.7v
114 -* Power Consumption: < 4uA.
115 -* Frequency Range: 150 MHz ~~ 960 MHz
116 -* Maximum Power +22 dBm constant RF output
117 -* High sensitivity: -148 dBm
118 -* Temperature:
119 -** Storage: -55 ~~ +125℃
120 -** Operating: -40 ~~ +85℃
121 -* Humidity:
122 -** Storage: 5 ~~ 95% (Non-Condensing)
123 -** Operating: 10 ~~ 95% (Non-Condensing)
124 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
125 -* LoRa Rx current: <9 mA
126 -* I/O Voltage: 3.3v
127 127  
131 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
128 128  
129 -== 2.4  Pin Mapping & LED ==
133 +[[image:image-20220726135239-1.png]]
130 130  
131 131  
132 132  
133 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
137 +(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
134 134  
139 +[[image:image-20220726135356-2.png]]
135 135  
136 136  
137 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
138 138  
143 +(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
139 139  
140 140  
141 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
146 +[[image:image-20220723172235-7.png||height="480" width="1027"]]
142 142  
143 143  
144 144  
145 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
150 +== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
146 146  
147 147  
148 -=== 2.8.1  Items needed for update ===
153 +(% style="color:blue" %)**1.  Open project**
149 149  
150 -1. LA66 LoRaWAN Shield
151 -1. Arduino
152 -1. USB TO TTL Adapter
153 153  
154 -[[image:image-20220602100052-2.png||height="385" width="600"]]
156 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
155 155  
156 156  
157 -=== 2.8.2  Connection ===
159 +[[image:image-20220723172502-8.png]]
158 158  
159 159  
160 -[[image:image-20220602101311-3.png||height="276" width="600"]]
161 161  
163 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
162 162  
163 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
164 164  
166 +[[image:image-20220723172938-9.png||height="652" width="1050"]]
165 165  
166 -(% style="background-color:yellow" %)**GND  <-> GND
167 -TXD  <->  TXD
168 -RXD  <->  RXD**
169 169  
170 170  
171 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
170 +== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
172 172  
173 -Connect USB TTL Adapter to PC after connecting the wires
174 174  
173 +(% style="color:blue" %)**1.  Open project**
175 175  
176 -[[image:image-20220602102240-4.png||height="304" width="600"]]
177 177  
176 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
178 178  
179 -=== 2.8.3  Upgrade steps ===
180 180  
179 +[[image:image-20220723173341-10.png||height="581" width="1014"]]
181 181  
182 -==== 1.  Switch SW1 to put in ISP position ====
183 183  
184 184  
185 -[[image:image-20220602102824-5.png||height="306" width="600"]]
183 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
186 186  
187 187  
188 -==== 2.  Press the RST switch once ====
186 +[[image:image-20220723173950-11.png||height="665" width="1012"]]
189 189  
190 -[[image:image-20220602104701-12.png||height="285" width="600"]]
191 191  
192 192  
193 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
190 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
194 194  
192 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
195 195  
196 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
194 +[[image:image-20220723175700-12.png||height="602" width="995"]]
197 197  
198 198  
199 -[[image:image-20220602103227-6.png]]
200 200  
198 +== 1.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
201 201  
202 -[[image:image-20220602103357-7.png]]
203 203  
201 +=== 1.8.1  Items needed for update ===
204 204  
205 205  
206 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
207 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
204 +1. LA66 LoRaWAN Shield
205 +1. Arduino
206 +1. USB TO TTL Adapter
208 208  
209 209  
210 -[[image:image-20220602103844-8.png]]
211 211  
210 +[[image:image-20220602100052-2.png||height="385" width="600"]]
212 212  
213 213  
214 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
215 -(% style="color:blue" %)**3. Select the bin file to burn**
216 216  
214 +=== 1.8.2  Connection ===
217 217  
218 -[[image:image-20220602104144-9.png]]
219 219  
217 +[[image:image-20220602101311-3.png||height="276" width="600"]]
220 220  
221 -[[image:image-20220602104251-10.png]]
222 222  
220 +(((
221 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
222 +)))
223 223  
224 -[[image:image-20220602104402-11.png]]
224 +(((
225 +(% style="background-color:yellow" %)**GND  <-> GND
226 +TXD  <->  TXD
227 +RXD  <->  RXD**
228 +)))
225 225  
226 226  
231 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
227 227  
228 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
229 -(% style="color:blue" %)**4. Click to start the download**
233 +Connect USB TTL Adapter to PC after connecting the wires
230 230  
231 -[[image:image-20220602104923-13.png]]
232 232  
236 +[[image:image-20220602102240-4.png||height="304" width="600"]]
233 233  
234 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
235 -(% style="color:blue" %)**5. Check update process**
236 236  
237 237  
238 -[[image:image-20220602104948-14.png]]
240 +=== 1.8.3  Upgrade steps ===
239 239  
240 240  
241 241  
242 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
243 -(% style="color:blue" %)**The following picture shows that the burning is successful**
244 +==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
244 244  
245 -[[image:image-20220602105251-15.png]]
246 246  
247 +[[image:image-20220602102824-5.png||height="306" width="600"]]
247 247  
248 248  
249 -= 3.  LA66 USB LoRaWAN Adapter =
250 250  
251 +==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
251 251  
252 -== 3.1  Overview ==
253 253  
254 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
254 +[[image:image-20220817085447-1.png]]
255 255  
256 256  
257 -== 3.2  Features ==
258 258  
259 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
260 -* Ultra-long RF range
261 -* Support LoRaWAN v1.0.4 protocol
262 -* Support peer-to-peer protocol
263 -* TCXO crystal to ensure RF performance on low temperature
264 -* Spring RF antenna
265 -* Available in different frequency LoRaWAN frequency bands.
266 -* World-wide unique OTAA keys.
267 -* AT Command via UART-TTL interface
268 -* Firmware upgradable via UART interface
269 269  
270 -== Specification ==
259 +==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
271 271  
272 -* CPU: 32-bit 48 MHz
273 -* Flash: 256KB
274 -* RAM: 64KB
275 -* Input Power Range: 5v
276 -* Frequency Range: 150 MHz ~~ 960 MHz
277 -* Maximum Power +22 dBm constant RF output
278 -* High sensitivity: -148 dBm
279 -* Temperature:
280 -** Storage: -55 ~~ +125℃
281 -** Operating: -40 ~~ +85℃
282 -* Humidity:
283 -** Storage: 5 ~~ 95% (Non-Condensing)
284 -** Operating: 10 ~~ 95% (Non-Condensing)
285 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
286 -* LoRa Rx current: <9 mA
287 287  
288 -== Pin Mapping & LED ==
262 +(((
263 +(% style="color:blue" %)**1. Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
264 +)))
289 289  
290 -== Example Send & Get Messages via LoRaWAN in PC ==
291 291  
292 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
267 +[[image:image-20220602103227-6.png]]
293 293  
294 -~1. Connect the LA66 USB LoRaWAN adapter to PC
295 295  
296 -[[image:image-20220602171217-1.png||height="538" width="800"]]
270 +[[image:image-20220602103357-7.png]]
297 297  
298 -Open the serial port tool
299 299  
300 -[[image:image-20220602161617-8.png]]
301 301  
302 -[[image:image-20220602161718-9.png||height="457" width="800"]]
274 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
275 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
303 303  
304 304  
305 -2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.
278 +[[image:image-20220602103844-8.png]]
306 306  
307 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
308 308  
309 -[[image:image-20220602161935-10.png||height="498" width="800"]]
310 310  
282 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
283 +(% style="color:blue" %)**3. Select the bin file to burn**
311 311  
312 -3. See Uplink Command
313 313  
314 -Command format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
286 +[[image:image-20220602104144-9.png]]
315 315  
316 -example: AT+SENDB=01,02,8,05820802581ea0a5
317 317  
318 -[[image:image-20220602162157-11.png||height="497" width="800"]]
289 +[[image:image-20220602104251-10.png]]
319 319  
320 320  
321 -4. Check to see if TTN received the message
292 +[[image:image-20220602104402-11.png]]
322 322  
323 -[[image:image-20220602162331-12.png||height="420" width="800"]]
324 324  
325 325  
296 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
297 +(% style="color:blue" %)**4. Click to start the download**
326 326  
327 -== Example:Send PC's CPU/RAM usage to TTN via python ==
299 +[[image:image-20220602104923-13.png]]
328 328  
329 -(% class="wikigeneratedid" id="HUsepythonasanexampleFF1A" %)
330 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
331 331  
332 -(% class="wikigeneratedid" id="HPreconditions:" %)
333 -**Preconditions:**
334 334  
335 -1.LA66 USB LoRaWAN Adapter works fine
303 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
304 +(% style="color:blue" %)**5. Check update process**
336 336  
337 -2.LA66 USB LoRaWAN Adapter  is registered with TTN
338 338  
339 -(% class="wikigeneratedid" id="HStepsforusage" %)
340 -**Steps for usage**
307 +[[image:image-20220602104948-14.png]]
341 341  
342 -1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
343 343  
344 -2.Run the python script in PC and see the TTN
345 345  
346 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
311 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
312 +(% style="color:blue" %)**The following picture shows that the burning is successful**
347 347  
314 +[[image:image-20220602105251-15.png]]
348 348  
349 349  
350 -== Example Send & Get Messages via LoRaWAN in RPi ==
351 351  
352 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
318 += 2.  FAQ =
353 353  
354 -~1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi
355 355  
356 -[[image:image-20220602171233-2.png||height="538" width="800"]]
321 +== 2.1  How to Compile Source Code for LA66? ==
357 357  
358 358  
359 -2. Install Minicom in RPi.
324 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
360 360  
361 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
362 362  
363 -(% class="mark" %)apt update
364 364  
365 -(% class="mark" %)apt install minicom
328 += 3.  Order Info =
366 366  
367 367  
368 -Use minicom to connect to the RPI's terminal
331 +**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
369 369  
370 -[[image:image-20220602153146-3.png||height="439" width="500"]]
371 371  
334 +(% style="color:blue" %)**XXX**(%%): The default frequency band
372 372  
373 -3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.
374 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
336 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
337 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
338 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
339 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
340 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
341 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
342 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
343 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
344 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
375 375  
376 -[[image:image-20220602154928-5.png||height="436" width="500"]]
377 377  
378 378  
379 -4. Send Uplink message
380 380  
381 -Format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
349 += 4.  Reference =
382 382  
383 -example: AT+SENDB=01,02,8,05820802581ea0a5
384 384  
385 -[[image:image-20220602160339-6.png||height="517" width="600"]]
352 +* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
386 386  
387 -Check to see if TTN received the message
388 -
389 -[[image:image-20220602160627-7.png||height="369" width="800"]]
390 -
391 -
392 -
393 -== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
394 -
395 -
396 -== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
397 -
398 -
399 -
400 -= Order Info =
401 -
402 -Part Number:
403 -
404 -**LA66-XXX**, **LA66-LoRaWAN-Shield-XXX** or **LA66-USB-LoRaWAN-Adapter-XXX**
405 -
406 -**XXX**: The default frequency band
407 -
408 -* **AS923**: LoRaWAN AS923 band
409 -* **AU915**: LoRaWAN AU915 band
410 -* **EU433**: LoRaWAN EU433 band
411 -* **EU868**: LoRaWAN EU868 band
412 -* **KR920**: LoRaWAN KR920 band
413 -* **US915**: LoRaWAN US915 band
414 -* **IN865**: LoRaWAN IN865 band
415 -* **CN470**: LoRaWAN CN470 band
416 -* **PP**: Peer to Peer LoRa Protocol
417 -
418 -= Reference =
419 -
420 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
421 -
422 422  
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +784.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0