Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 87.2 >
edited by Xiaoling
on 2022/07/13 09:34
To version < 146.12 >
edited by Xiaoling
on 2022/08/16 17:59
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 LoRaWAN Shield User Manual
Content
... ... @@ -1,100 +1,61 @@
1 1  
2 2  
3 -{{box cssClass="floatinginfobox" title="**Contents**"}}
4 -{{toc/}}
5 -{{/box}}
3 +**Table of Contents:**
6 6  
7 7  {{toc/}}
8 8  
9 9  
10 10  
11 -= 1.  LA66 LoRaWAN Module =
12 12  
10 += 1.  LA66 LoRaWAN Shield =
13 13  
14 -== 1.1  What is LA66 LoRaWAN Module ==
15 15  
13 +== 1.1  Overview ==
16 16  
17 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
18 18  
19 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
16 +(((
17 +[[image:image-20220715000826-2.png||height="145" width="220"]]
18 +)))
20 20  
20 +(((
21 +
22 +)))
23 +
24 +(((
25 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 +)))
27 +
28 +(((
29 +(((
30 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 +)))
32 +)))
33 +
34 +(((
35 +(((
21 21  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 +)))
38 +)))
22 22  
40 +(((
41 +(((
23 23  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 +)))
44 +)))
24 24  
46 +(((
47 +(((
25 25  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
49 +)))
50 +)))
26 26  
27 27  
53 +
28 28  == 1.2  Features ==
29 29  
30 -* Support LoRaWAN v1.0.4 protocol
31 -* Support peer-to-peer protocol
32 -* TCXO crystal to ensure RF performance on low temperature
33 -* SMD Antenna pad and i-pex antenna connector
34 -* Available in different frequency LoRaWAN frequency bands.
35 -* World-wide unique OTAA keys.
36 -* AT Command via UART-TTL interface
37 -* Firmware upgradable via UART interface
38 -* Ultra-long RF range
39 39  
40 -
41 -== 1.3  Specification ==
42 -
43 -* CPU: 32-bit 48 MHz
44 -* Flash: 256KB
45 -* RAM: 64KB
46 -* Input Power Range: 1.8v ~~ 3.7v
47 -* Power Consumption: < 4uA.
48 -* Frequency Range: 150 MHz ~~ 960 MHz
49 -* Maximum Power +22 dBm constant RF output
50 -* High sensitivity: -148 dBm
51 -* Temperature:
52 -** Storage: -55 ~~ +125℃
53 -** Operating: -40 ~~ +85℃
54 -* Humidity:
55 -** Storage: 5 ~~ 95% (Non-Condensing)
56 -** Operating: 10 ~~ 95% (Non-Condensing)
57 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
58 -* LoRa Rx current: <9 mA
59 -* I/O Voltage: 3.3v
60 -
61 -
62 -== 1.4  AT Command ==
63 -
64 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
65 -
66 -
67 -== 1.5  Dimension ==
68 -
69 -[[image:image-20220517072526-1.png]]
70 -
71 -
72 -
73 -== 1.6  Pin Mapping ==
74 -
75 -
76 -[[image:image-20220523101537-1.png]]
77 -
78 -
79 -
80 -== 1.7  Land Pattern ==
81 -
82 -[[image:image-20220517072821-2.png]]
83 -
84 -
85 -
86 -= 2.  LA66 LoRaWAN Shield =
87 -
88 -
89 -== 2.1  Overview ==
90 -
91 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
92 -
93 -
94 -== 2.2  Features ==
95 -
96 96  * Arduino Shield base on LA66 LoRaWAN module
97 -* Support LoRaWAN v1.0.4 protocol
58 +* Support LoRaWAN v1.0.3 protocol
98 98  * Support peer-to-peer protocol
99 99  * TCXO crystal to ensure RF performance on low temperature
100 100  * SMA connector
... ... @@ -105,8 +105,10 @@
105 105  * Ultra-long RF range
106 106  
107 107  
108 -== 2.3  Specification ==
109 109  
70 +== 1.3  Specification ==
71 +
72 +
110 110  * CPU: 32-bit 48 MHz
111 111  * Flash: 256KB
112 112  * RAM: 64KB
... ... @@ -126,297 +126,250 @@
126 126  * I/O Voltage: 3.3v
127 127  
128 128  
129 -== 2.4  Pin Mapping & LED ==
130 130  
93 +== 1.4  Pin Mapping & LED ==
131 131  
132 132  
133 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
96 +[[image:image-20220814101457-1.png||height="553" width="761"]]
134 134  
98 +~1. The LED lights up red when there is an upstream data packet
99 +2. When the network is successfully connected, the green light will be on for 5 seconds
100 +3. Purple light on when receiving downlink data packets
135 135  
136 136  
137 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
138 138  
104 +== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
139 139  
140 140  
141 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
107 +**Show connection diagram：**
142 142  
143 143  
110 +[[image:image-20220723170210-2.png||height="908" width="681"]]
144 144  
145 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
146 146  
147 147  
148 -=== 2.8.1  Items needed for update ===
114 +(% style="color:blue" %)**1.  open Arduino IDE**
149 149  
150 -1. LA66 LoRaWAN Shield
151 -1. Arduino
152 -1. USB TO TTL Adapter
153 153  
154 -[[image:image-20220602100052-2.png||height="385" width="600"]]
117 +[[image:image-20220723170545-4.png]]
155 155  
156 156  
157 -=== 2.8.2  Connection ===
158 158  
121 +(% style="color:blue" %)**2.  Open project**
159 159  
160 -[[image:image-20220602101311-3.png||height="276" width="600"]]
161 161  
124 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
162 162  
163 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
126 +[[image:image-20220726135239-1.png]]
164 164  
165 165  
166 -(% style="background-color:yellow" %)**GND  <-> GND
167 -TXD  <->  TXD
168 -RXD  <->  RXD**
129 +(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
169 169  
131 +[[image:image-20220726135356-2.png]]
170 170  
171 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
172 172  
173 -Connect USB TTL Adapter to PC after connecting the wires
134 +(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
174 174  
175 175  
176 -[[image:image-20220602102240-4.png||height="304" width="600"]]
137 +[[image:image-20220723172235-7.png||height="480" width="1027"]]
177 177  
178 178  
179 -=== 2.8.3  Upgrade steps ===
180 180  
141 +== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
181 181  
182 -==== 1.  Switch SW1 to put in ISP position ====
183 183  
144 +(% style="color:blue" %)**1.  Open project**
184 184  
185 -[[image:image-20220602102824-5.png||height="306" width="600"]]
186 186  
147 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
187 187  
188 -==== 2.  Press the RST switch once ====
189 189  
190 -[[image:image-20220602104701-12.png||height="285" width="600"]]
150 +[[image:image-20220723172502-8.png]]
191 191  
192 192  
193 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
194 194  
154 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
195 195  
196 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
197 197  
157 +[[image:image-20220723172938-9.png||height="652" width="1050"]]
198 198  
199 -[[image:image-20220602103227-6.png]]
200 200  
201 201  
202 -[[image:image-20220602103357-7.png]]
161 +== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
203 203  
204 204  
164 +(% style="color:blue" %)**1.  Open project**
205 205  
206 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
207 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
208 208  
167 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
209 209  
210 -[[image:image-20220602103844-8.png]]
211 211  
170 +[[image:image-20220723173341-10.png||height="581" width="1014"]]
212 212  
213 213  
214 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
215 -(% style="color:blue" %)**3. Select the bin file to burn**
216 216  
174 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
217 217  
218 -[[image:image-20220602104144-9.png]]
219 219  
177 +[[image:image-20220723173950-11.png||height="665" width="1012"]]
220 220  
221 -[[image:image-20220602104251-10.png]]
222 222  
223 223  
224 -[[image:image-20220602104402-11.png]]
181 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
225 225  
183 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
226 226  
185 +[[image:image-20220723175700-12.png||height="602" width="995"]]
227 227  
228 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
229 -(% style="color:blue" %)**4. Click to start the download**
230 230  
231 -[[image:image-20220602104923-13.png]]
232 232  
189 +== 1.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
233 233  
234 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
235 -(% style="color:blue" %)**5. Check update process**
236 236  
192 +=== 1.8.1  Items needed for update ===
237 237  
238 -[[image:image-20220602104948-14.png]]
239 239  
195 +1. LA66 LoRaWAN Shield
196 +1. Arduino
197 +1. USB TO TTL Adapter
240 240  
199 +[[image:image-20220602100052-2.png||height="385" width="600"]]
241 241  
242 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
243 -(% style="color:blue" %)**The following picture shows that the burning is successful**
244 244  
245 -[[image:image-20220602105251-15.png]]
246 246  
203 +=== 1.8.2  Connection ===
247 247  
248 248  
249 -= 3.  LA66 USB LoRaWAN Adapter =
206 +[[image:image-20220602101311-3.png||height="276" width="600"]]
250 250  
251 251  
252 -== 3.1  Overview ==
209 +(((
210 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
211 +)))
253 253  
254 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
213 +(((
214 +(% style="background-color:yellow" %)**GND  <-> GND
215 +TXD  <->  TXD
216 +RXD  <->  RXD**
217 +)))
255 255  
256 256  
257 -== 3.2  Features ==
220 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
258 258  
259 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
260 -* Ultra-long RF range
261 -* Support LoRaWAN v1.0.4 protocol
262 -* Support peer-to-peer protocol
263 -* TCXO crystal to ensure RF performance on low temperature
264 -* Spring RF antenna
265 -* Available in different frequency LoRaWAN frequency bands.
266 -* World-wide unique OTAA keys.
267 -* AT Command via UART-TTL interface
268 -* Firmware upgradable via UART interface
222 +Connect USB TTL Adapter to PC after connecting the wires
269 269  
270 -== Specification ==
271 271  
272 -* CPU: 32-bit 48 MHz
273 -* Flash: 256KB
274 -* RAM: 64KB
275 -* Input Power Range: 5v
276 -* Frequency Range: 150 MHz ~~ 960 MHz
277 -* Maximum Power +22 dBm constant RF output
278 -* High sensitivity: -148 dBm
279 -* Temperature:
280 -** Storage: -55 ~~ +125℃
281 -** Operating: -40 ~~ +85℃
282 -* Humidity:
283 -** Storage: 5 ~~ 95% (Non-Condensing)
284 -** Operating: 10 ~~ 95% (Non-Condensing)
285 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
286 -* LoRa Rx current: <9 mA
225 +[[image:image-20220602102240-4.png||height="304" width="600"]]
287 287  
288 -== Pin Mapping & LED ==
289 289  
290 -== Example Send & Get Messages via LoRaWAN in PC ==
291 291  
292 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
229 +=== 1.8.3  Upgrade steps ===
293 293  
294 -~1. Connect the LA66 USB LoRaWAN adapter to PC
295 295  
296 -[[image:image-20220602171217-1.png||height="538" width="800"]]
297 297  
298 -Open the serial port tool
233 +==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
299 299  
300 -[[image:image-20220602161617-8.png]]
301 301  
302 -[[image:image-20220602161718-9.png||height="457" width="800"]]
236 +[[image:image-20220602102824-5.png||height="306" width="600"]]
303 303  
304 304  
305 -2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.
306 306  
307 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
240 +==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
308 308  
309 -[[image:image-20220602161935-10.png||height="498" width="800"]]
310 310  
243 +[[image:image-20220602104701-12.png||height="285" width="600"]]
311 311  
312 -3. See Uplink Command
313 313  
314 -Command format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
315 315  
316 -example: AT+SENDB=01,02,8,05820802581ea0a5
247 +==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
317 317  
318 -[[image:image-20220602162157-11.png||height="497" width="800"]]
319 319  
250 +(((
251 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
252 +)))
320 320  
321 -4. Check to see if TTN received the message
322 322  
323 -[[image:image-20220602162331-12.png||height="420" width="800"]]
255 +[[image:image-20220602103227-6.png]]
324 324  
325 325  
258 +[[image:image-20220602103357-7.png]]
326 326  
327 -== Example:Send PC's CPU/RAM usage to TTN via python ==
328 328  
329 -(% class="wikigeneratedid" id="HUsepythonasanexampleFF1A" %)
330 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
331 331  
332 -(% class="wikigeneratedid" id="HPreconditions:" %)
333 -**Preconditions:**
262 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
263 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
334 334  
335 -1.LA66 USB LoRaWAN Adapter works fine
336 336  
337 -2.LA66 USB LoRaWAN Adapter  is registered with TTN
266 +[[image:image-20220602103844-8.png]]
338 338  
339 -(% class="wikigeneratedid" id="HStepsforusage" %)
340 -**Steps for usage**
341 341  
342 -1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
343 343  
344 -2.Run the python script in PC and see the TTN
270 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
271 +(% style="color:blue" %)**3. Select the bin file to burn**
345 345  
346 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
347 347  
274 +[[image:image-20220602104144-9.png]]
348 348  
349 349  
350 -== Example Send & Get Messages via LoRaWAN in RPi ==
277 +[[image:image-20220602104251-10.png]]
351 351  
352 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
353 353  
354 -~1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi
280 +[[image:image-20220602104402-11.png]]
355 355  
356 -[[image:image-20220602171233-2.png||height="538" width="800"]]
357 357  
358 358  
359 -2. Install Minicom in RPi.
284 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
285 +(% style="color:blue" %)**4. Click to start the download**
360 360  
361 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
287 +[[image:image-20220602104923-13.png]]
362 362  
363 -(% class="mark" %)apt update
364 364  
365 -(% class="mark" %)apt install minicom
366 366  
291 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
292 +(% style="color:blue" %)**5. Check update process**
367 367  
368 -Use minicom to connect to the RPI's terminal
369 369  
370 -[[image:image-20220602153146-3.png||height="439" width="500"]]
295 +[[image:image-20220602104948-14.png]]
371 371  
372 372  
373 -3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.
374 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
375 375  
376 -[[image:image-20220602154928-5.png||height="436" width="500"]]
299 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
300 +(% style="color:blue" %)**The following picture shows that the burning is successful**
377 377  
302 +[[image:image-20220602105251-15.png]]
378 378  
379 -4. Send Uplink message
380 380  
381 -Format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
382 382  
383 -example: AT+SENDB=01,02,8,05820802581ea0a5
306 += 2.  FAQ =
384 384  
385 -[[image:image-20220602160339-6.png||height="517" width="600"]]
386 386  
387 -Check to see if TTN received the message
309 +== 2.1  How to Compile Source Code for LA66? ==
388 388  
389 -[[image:image-20220602160627-7.png||height="369" width="800"]]
390 390  
312 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
391 391  
392 392  
393 -== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
394 394  
316 += 3.  Order Info =
395 395  
396 -== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
397 397  
319 +**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
398 398  
399 399  
400 -= Order Info =
322 +(% style="color:blue" %)**XXX**(%%): The default frequency band
401 401  
402 -Part Number:
324 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
325 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
326 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
327 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
328 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
329 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
330 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
331 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
332 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
403 403  
404 -**LA66-XXX**, **LA66-LoRaWAN-Shield-XXX** or **LA66-USB-LoRaWAN-Adapter-XXX**
405 405  
406 -**XXX**: The default frequency band
335 += 4.  Reference =
407 407  
408 -* **AS923**: LoRaWAN AS923 band
409 -* **AU915**: LoRaWAN AU915 band
410 -* **EU433**: LoRaWAN EU433 band
411 -* **EU868**: LoRaWAN EU868 band
412 -* **KR920**: LoRaWAN KR920 band
413 -* **US915**: LoRaWAN US915 band
414 -* **IN865**: LoRaWAN IN865 band
415 -* **CN470**: LoRaWAN CN470 band
416 -* **PP**: Peer to Peer LoRa Protocol
417 417  
418 -= Reference =
419 -
420 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
421 -
422 -
338 +* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0