Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 87.16 >
edited by Xiaoling
on 2022/07/13 10:10
To version < 151.2 >
edited by Xiaoling
on 2022/08/22 16:13
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 LoRaWAN Shield User Manual
Content
... ... @@ -6,105 +6,56 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
10 += 1.  LA66 LoRaWAN Shield =
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
13 13  
13 +== 1.1  Overview ==
14 14  
15 +
15 15  (((
16 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
17 +[[image:image-20220715000826-2.png||height="145" width="220"]]
17 17  )))
18 18  
19 19  (((
20 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
21 +
21 21  )))
22 22  
23 23  (((
25 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 +)))
27 +
28 +(((
29 +(((
30 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 +)))
32 +)))
33 +
34 +(((
35 +(((
24 24  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
25 25  )))
38 +)))
26 26  
27 27  (((
41 +(((
28 28  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
29 29  )))
44 +)))
30 30  
31 31  (((
47 +(((
32 32  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
33 33  )))
50 +)))
34 34  
35 35  
53 +
36 36  == 1.2  Features ==
37 37  
38 -* Support LoRaWAN v1.0.4 protocol
39 -* Support peer-to-peer protocol
40 -* TCXO crystal to ensure RF performance on low temperature
41 -* SMD Antenna pad and i-pex antenna connector
42 -* Available in different frequency LoRaWAN frequency bands.
43 -* World-wide unique OTAA keys.
44 -* AT Command via UART-TTL interface
45 -* Firmware upgradable via UART interface
46 -* Ultra-long RF range
47 47  
48 -
49 -
50 -== 1.3  Specification ==
51 -
52 -* CPU: 32-bit 48 MHz
53 -* Flash: 256KB
54 -* RAM: 64KB
55 -* Input Power Range: 1.8v ~~ 3.7v
56 -* Power Consumption: < 4uA.
57 -* Frequency Range: 150 MHz ~~ 960 MHz
58 -* Maximum Power +22 dBm constant RF output
59 -* High sensitivity: -148 dBm
60 -* Temperature:
61 -** Storage: -55 ~~ +125℃
62 -** Operating: -40 ~~ +85℃
63 -* Humidity:
64 -** Storage: 5 ~~ 95% (Non-Condensing)
65 -** Operating: 10 ~~ 95% (Non-Condensing)
66 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
67 -* LoRa Rx current: <9 mA
68 -* I/O Voltage: 3.3v
69 -
70 -
71 -
72 -== 1.4  AT Command ==
73 -
74 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
75 -
76 -
77 -== 1.5  Dimension ==
78 -
79 -[[image:image-20220517072526-1.png]]
80 -
81 -
82 -
83 -== 1.6  Pin Mapping ==
84 -
85 -
86 -[[image:image-20220523101537-1.png]]
87 -
88 -
89 -
90 -== 1.7  Land Pattern ==
91 -
92 -[[image:image-20220517072821-2.png]]
93 -
94 -
95 -
96 -= 2.  LA66 LoRaWAN Shield =
97 -
98 -
99 -== 2.1  Overview ==
100 -
101 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
102 -
103 -
104 -== 2.2  Features ==
105 -
106 106  * Arduino Shield base on LA66 LoRaWAN module
107 -* Support LoRaWAN v1.0.4 protocol
58 +* Support LoRaWAN v1.0.3 protocol
108 108  * Support peer-to-peer protocol
109 109  * TCXO crystal to ensure RF performance on low temperature
110 110  * SMA connector
... ... @@ -116,8 +116,10 @@
116 116  
117 117  
118 118  
119 -== 2.3  Specification ==
120 120  
71 +== 1.3  Specification ==
72 +
73 +
121 121  * CPU: 32-bit 48 MHz
122 122  * Flash: 256KB
123 123  * RAM: 64KB
... ... @@ -138,318 +138,246 @@
138 138  
139 139  
140 140  
141 -== 2.4  Pin Mapping & LED ==
142 142  
95 +== 1.4  Pin Mapping & LED ==
143 143  
144 144  
145 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
98 +[[image:image-20220817085048-1.png||height="533" width="734"]]
146 146  
147 147  
148 148  
149 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
102 +~1. The LED lights up red when there is an upstream data packet
103 +2. When the network is successfully connected, the green light will be on for 5 seconds
104 +3. Purple light on when receiving downlink data packets
150 150  
151 151  
107 +[[image:image-20220820112305-1.png||height="515" width="749"]]
152 152  
153 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
154 154  
155 155  
111 +== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
156 156  
157 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
158 158  
114 +**Show connection diagram：**
159 159  
160 -=== 2.8.1  Items needed for update ===
161 161  
162 -1. LA66 LoRaWAN Shield
163 -1. Arduino
164 -1. USB TO TTL Adapter
117 +[[image:image-20220723170210-2.png||height="908" width="681"]]
165 165  
166 166  
167 167  
121 +(% style="color:blue" %)**1.  open Arduino IDE**
168 168  
169 -[[image:image-20220602100052-2.png||height="385" width="600"]]
170 170  
124 +[[image:image-20220723170545-4.png]]
171 171  
172 -=== 2.8.2  Connection ===
173 173  
174 174  
175 -[[image:image-20220602101311-3.png||height="276" width="600"]]
128 +(% style="color:blue" %)**2.  Open project**
176 176  
177 177  
178 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
131 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
179 179  
180 -(((
181 -(% style="background-color:yellow" %)**GND  <-> GND
182 -TXD  <->  TXD
183 -RXD  <->  RXD**
184 -)))
133 +[[image:image-20220726135239-1.png]]
185 185  
186 186  
187 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
188 188  
189 -Connect USB TTL Adapter to PC after connecting the wires
137 +(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
190 190  
139 +[[image:image-20220726135356-2.png]]
191 191  
192 -[[image:image-20220602102240-4.png||height="304" width="600"]]
193 193  
194 194  
195 -=== 2.8.3  Upgrade steps ===
143 +(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
196 196  
197 197  
198 -==== 1.  Switch SW1 to put in ISP position ====
146 +[[image:image-20220723172235-7.png||height="480" width="1027"]]
199 199  
200 200  
201 -[[image:image-20220602102824-5.png||height="306" width="600"]]
202 202  
150 +== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
203 203  
204 204  
205 -==== 2.  Press the RST switch once ====
153 +(% style="color:blue" %)**1.  Open project**
206 206  
207 207  
208 -[[image:image-20220602104701-12.png||height="285" width="600"]]
156 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
209 209  
210 210  
159 +[[image:image-20220723172502-8.png]]
211 211  
212 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
213 213  
214 214  
215 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
163 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
216 216  
217 217  
218 -[[image:image-20220602103227-6.png]]
166 +[[image:image-20220723172938-9.png||height="652" width="1050"]]
219 219  
220 220  
221 -[[image:image-20220602103357-7.png]]
222 222  
170 +== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
223 223  
224 224  
225 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
226 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
173 +(% style="color:blue" %)**1.  Open project**
227 227  
228 228  
229 -[[image:image-20220602103844-8.png]]
176 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
230 230  
231 231  
179 +[[image:image-20220723173341-10.png||height="581" width="1014"]]
232 232  
233 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
234 -(% style="color:blue" %)**3. Select the bin file to burn**
235 235  
236 236  
237 -[[image:image-20220602104144-9.png]]
183 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
238 238  
239 239  
240 -[[image:image-20220602104251-10.png]]
186 +[[image:image-20220723173950-11.png||height="665" width="1012"]]
241 241  
242 242  
243 -[[image:image-20220602104402-11.png]]
244 244  
190 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
245 245  
192 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
246 246  
247 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
248 -(% style="color:blue" %)**4. Click to start the download**
194 +[[image:image-20220723175700-12.png||height="602" width="995"]]
249 249  
250 -[[image:image-20220602104923-13.png]]
251 251  
252 252  
198 +== 1.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
253 253  
254 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
255 -(% style="color:blue" %)**5. Check update process**
256 256  
201 +=== 1.8.1  Items needed for update ===
257 257  
258 -[[image:image-20220602104948-14.png]]
259 259  
204 +1. LA66 LoRaWAN Shield
205 +1. Arduino
206 +1. USB TO TTL Adapter
260 260  
261 261  
262 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
263 -(% style="color:blue" %)**The following picture shows that the burning is successful**
264 264  
265 -[[image:image-20220602105251-15.png]]
210 +[[image:image-20220602100052-2.png||height="385" width="600"]]
266 266  
267 267  
268 268  
269 -= 3.  LA66 USB LoRaWAN Adapter =
214 +=== 1.8.2  Connection ===
270 270  
271 271  
272 -== 3.1  Overview ==
217 +[[image:image-20220602101311-3.png||height="276" width="600"]]
273 273  
274 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
275 275  
220 +(((
221 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
222 +)))
276 276  
277 -== 3.2  Features ==
224 +(((
225 +(% style="background-color:yellow" %)**GND  <-> GND
226 +TXD  <->  TXD
227 +RXD  <->  RXD**
228 +)))
278 278  
279 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
280 -* Ultra-long RF range
281 -* Support LoRaWAN v1.0.4 protocol
282 -* Support peer-to-peer protocol
283 -* TCXO crystal to ensure RF performance on low temperature
284 -* Spring RF antenna
285 -* Available in different frequency LoRaWAN frequency bands.
286 -* World-wide unique OTAA keys.
287 -* AT Command via UART-TTL interface
288 -* Firmware upgradable via UART interface
289 289  
231 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
290 290  
233 +Connect USB TTL Adapter to PC after connecting the wires
291 291  
292 -== 3.3  Specification ==
293 293  
294 -* CPU: 32-bit 48 MHz
295 -* Flash: 256KB
296 -* RAM: 64KB
297 -* Input Power Range: 5v
298 -* Frequency Range: 150 MHz ~~ 960 MHz
299 -* Maximum Power +22 dBm constant RF output
300 -* High sensitivity: -148 dBm
301 -* Temperature:
302 -** Storage: -55 ~~ +125℃
303 -** Operating: -40 ~~ +85℃
304 -* Humidity:
305 -** Storage: 5 ~~ 95% (Non-Condensing)
306 -** Operating: 10 ~~ 95% (Non-Condensing)
307 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
308 -* LoRa Rx current: <9 mA
236 +[[image:image-20220602102240-4.png||height="304" width="600"]]
309 309  
310 310  
311 311  
312 -== 3.4  Pin Mapping & LED ==
240 +=== 1.8.3  Upgrade steps ===
313 313  
314 314  
315 315  
316 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
244 +==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
317 317  
318 318  
319 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
247 +[[image:image-20220602102824-5.png||height="306" width="600"]]
320 320  
321 321  
322 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
323 323  
251 +==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
324 324  
325 -[[image:image-20220602171217-1.png||height="538" width="800"]]
326 326  
254 +[[image:image-20220817085447-1.png]]
327 327  
328 -Open the serial port tool
329 329  
330 -[[image:image-20220602161617-8.png]]
331 331  
332 -[[image:image-20220602161718-9.png||height="457" width="800"]]
333 333  
259 +==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
334 334  
335 335  
336 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
262 +(((
263 +(% style="color:blue" %)**1. Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
264 +)))
337 337  
338 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
339 339  
267 +[[image:image-20220602103227-6.png]]
340 340  
341 -[[image:image-20220602161935-10.png||height="498" width="800"]]
342 342  
270 +[[image:image-20220602103357-7.png]]
343 343  
344 344  
345 -(% style="color:blue" %)**3. See Uplink Command**
346 346  
347 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
274 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
275 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
348 348  
349 -example: AT+SENDB=01,02,8,05820802581ea0a5
350 350  
351 -[[image:image-20220602162157-11.png||height="497" width="800"]]
278 +[[image:image-20220602103844-8.png]]
352 352  
353 353  
354 354  
355 -(% style="color:blue" %)**4. Check to see if TTN received the message**
282 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
283 +(% style="color:blue" %)**3. Select the bin file to burn**
356 356  
357 -[[image:image-20220602162331-12.png||height="420" width="800"]]
358 358  
286 +[[image:image-20220602104144-9.png]]
359 359  
360 360  
361 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
289 +[[image:image-20220602104251-10.png]]
362 362  
363 363  
364 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
292 +[[image:image-20220602104402-11.png]]
365 365  
366 366  
367 -(% style="color:red" %)**Preconditions:**
368 368  
369 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
296 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
297 +(% style="color:blue" %)**4. Click to start the download**
370 370  
371 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
299 +[[image:image-20220602104923-13.png]]
372 372  
373 373  
374 374  
375 -(% style="color:blue" %)**Steps for usage:**
303 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
304 +(% style="color:blue" %)**5. Check update process**
376 376  
377 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
378 378  
379 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
307 +[[image:image-20220602104948-14.png]]
380 380  
381 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
382 382  
383 383  
311 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
312 +(% style="color:blue" %)**The following picture shows that the burning is successful**
384 384  
385 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
314 +[[image:image-20220602105251-15.png]]
386 386  
387 387  
388 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
389 389  
318 += 2.  FAQ =
390 390  
391 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
392 392  
393 -[[image:image-20220602171233-2.png||height="538" width="800"]]
321 +== 2.1  How to Compile Source Code for LA66? ==
394 394  
395 395  
324 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
396 396  
397 -(% style="color:blue" %)**2. Install Minicom in RPi.**
398 398  
399 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
400 400  
401 - (% style="background-color:yellow" %)**apt update**
328 += 3.  Order Info =
402 402  
403 - (% style="background-color:yellow" %)**apt install minicom**
404 404  
331 +**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
405 405  
406 -Use minicom to connect to the RPI's terminal
407 407  
408 -[[image:image-20220602153146-3.png||height="439" width="500"]]
409 -
410 -
411 -
412 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
413 -
414 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
415 -
416 -
417 -[[image:image-20220602154928-5.png||height="436" width="500"]]
418 -
419 -
420 -
421 -(% style="color:blue" %)**4. Send Uplink message**
422 -
423 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
424 -
425 -example: AT+SENDB=01,02,8,05820802581ea0a5
426 -
427 -
428 -[[image:image-20220602160339-6.png||height="517" width="600"]]
429 -
430 -
431 -
432 -Check to see if TTN received the message
433 -
434 -[[image:image-20220602160627-7.png||height="369" width="800"]]
435 -
436 -
437 -
438 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
439 -
440 -
441 -
442 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
443 -
444 -
445 -
446 -
447 -= 4.  Order Info =
448 -
449 -
450 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
451 -
452 -
453 453  (% style="color:blue" %)**XXX**(%%): The default frequency band
454 454  
455 455  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -464,8 +464,10 @@
464 464  
465 465  
466 466  
467 -= 5.  Reference =
468 468  
469 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
349 += 4.  Reference =
470 470  
351 +
352 +* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
353 +
471 471  
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +784.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0