Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 87.11 >
edited by Xiaoling
on 2022/07/13 10:04
To version < 149.3 >
edited by Xiaoling
on 2022/08/17 09:29
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 LoRaWAN Shield User Manual
Content
... ... @@ -1,96 +1,61 @@
1 1  
2 2  
3 +**Table of Contents:**
4 +
3 3  {{toc/}}
4 4  
5 5  
6 6  
7 -= 1.  LA66 LoRaWAN Module =
8 8  
10 += 1.  LA66 LoRaWAN Shield =
9 9  
10 -== 1.1  What is LA66 LoRaWAN Module ==
11 11  
13 +== 1.1  Overview ==
12 12  
13 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
14 14  
15 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
16 +(((
17 +[[image:image-20220715000826-2.png||height="145" width="220"]]
18 +)))
16 16  
20 +(((
21 +
22 +)))
23 +
24 +(((
25 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 +)))
27 +
28 +(((
29 +(((
30 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 +)))
32 +)))
33 +
34 +(((
35 +(((
17 17  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 +)))
38 +)))
18 18  
40 +(((
41 +(((
19 19  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 +)))
44 +)))
20 20  
46 +(((
47 +(((
21 21  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
49 +)))
50 +)))
22 22  
23 23  
53 +
24 24  == 1.2  Features ==
25 25  
26 -* Support LoRaWAN v1.0.4 protocol
27 -* Support peer-to-peer protocol
28 -* TCXO crystal to ensure RF performance on low temperature
29 -* SMD Antenna pad and i-pex antenna connector
30 -* Available in different frequency LoRaWAN frequency bands.
31 -* World-wide unique OTAA keys.
32 -* AT Command via UART-TTL interface
33 -* Firmware upgradable via UART interface
34 -* Ultra-long RF range
35 35  
36 -
37 -== 1.3  Specification ==
38 -
39 -* CPU: 32-bit 48 MHz
40 -* Flash: 256KB
41 -* RAM: 64KB
42 -* Input Power Range: 1.8v ~~ 3.7v
43 -* Power Consumption: < 4uA.
44 -* Frequency Range: 150 MHz ~~ 960 MHz
45 -* Maximum Power +22 dBm constant RF output
46 -* High sensitivity: -148 dBm
47 -* Temperature:
48 -** Storage: -55 ~~ +125℃
49 -** Operating: -40 ~~ +85℃
50 -* Humidity:
51 -** Storage: 5 ~~ 95% (Non-Condensing)
52 -** Operating: 10 ~~ 95% (Non-Condensing)
53 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
54 -* LoRa Rx current: <9 mA
55 -* I/O Voltage: 3.3v
56 -
57 -
58 -== 1.4  AT Command ==
59 -
60 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
61 -
62 -
63 -== 1.5  Dimension ==
64 -
65 -[[image:image-20220517072526-1.png]]
66 -
67 -
68 -
69 -== 1.6  Pin Mapping ==
70 -
71 -
72 -[[image:image-20220523101537-1.png]]
73 -
74 -
75 -
76 -== 1.7  Land Pattern ==
77 -
78 -[[image:image-20220517072821-2.png]]
79 -
80 -
81 -
82 -= 2.  LA66 LoRaWAN Shield =
83 -
84 -
85 -== 2.1  Overview ==
86 -
87 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
88 -
89 -
90 -== 2.2  Features ==
91 -
92 92  * Arduino Shield base on LA66 LoRaWAN module
93 -* Support LoRaWAN v1.0.4 protocol
58 +* Support LoRaWAN v1.0.3 protocol
94 94  * Support peer-to-peer protocol
95 95  * TCXO crystal to ensure RF performance on low temperature
96 96  * SMA connector
... ... @@ -101,8 +101,11 @@
101 101  * Ultra-long RF range
102 102  
103 103  
104 -== 2.3  Specification ==
105 105  
70 +
71 +== 1.3  Specification ==
72 +
73 +
106 106  * CPU: 32-bit 48 MHz
107 107  * Flash: 256KB
108 108  * RAM: 64KB
... ... @@ -122,311 +122,242 @@
122 122  * I/O Voltage: 3.3v
123 123  
124 124  
125 -== 2.4  Pin Mapping & LED ==
126 126  
127 127  
95 +== 1.4  Pin Mapping & LED ==
128 128  
129 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
130 130  
98 +[[image:image-20220817085048-1.png]]
131 131  
132 132  
133 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
134 134  
102 +~1. The LED lights up red when there is an upstream data packet
103 +2. When the network is successfully connected, the green light will be on for 5 seconds
104 +3. Purple light on when receiving downlink data packets
135 135  
136 136  
137 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
138 138  
108 +== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
139 139  
140 140  
141 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
111 +**Show connection diagram：**
142 142  
143 143  
144 -=== 2.8.1  Items needed for update ===
114 +[[image:image-20220723170210-2.png||height="908" width="681"]]
145 145  
146 -1. LA66 LoRaWAN Shield
147 -1. Arduino
148 -1. USB TO TTL Adapter
149 149  
150 -[[image:image-20220602100052-2.png||height="385" width="600"]]
151 151  
118 +(% style="color:blue" %)**1.  open Arduino IDE**
152 152  
153 -=== 2.8.2  Connection ===
154 154  
121 +[[image:image-20220723170545-4.png]]
155 155  
156 -[[image:image-20220602101311-3.png||height="276" width="600"]]
157 157  
158 158  
159 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
125 +(% style="color:blue" %)**2.  Open project**
160 160  
161 -(% style="background-color:yellow" %)**GND  <-> GND
162 -TXD  <->  TXD
163 -RXD  <->  RXD**
164 164  
128 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
165 165  
166 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
130 +[[image:image-20220726135239-1.png]]
167 167  
168 -Connect USB TTL Adapter to PC after connecting the wires
169 169  
170 170  
171 -[[image:image-20220602102240-4.png||height="304" width="600"]]
134 +(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
172 172  
136 +[[image:image-20220726135356-2.png]]
173 173  
174 -=== 2.8.3  Upgrade steps ===
175 175  
176 176  
177 -==== 1.  Switch SW1 to put in ISP position ====
140 +(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
178 178  
179 179  
180 -[[image:image-20220602102824-5.png||height="306" width="600"]]
143 +[[image:image-20220723172235-7.png||height="480" width="1027"]]
181 181  
182 182  
183 183  
184 -==== 2.  Press the RST switch once ====
147 +== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
185 185  
186 186  
187 -[[image:image-20220602104701-12.png||height="285" width="600"]]
150 +(% style="color:blue" %)**1.  Open project**
188 188  
189 189  
153 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
190 190  
191 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
192 192  
156 +[[image:image-20220723172502-8.png]]
193 193  
194 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
195 195  
196 196  
197 -[[image:image-20220602103227-6.png]]
160 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
198 198  
199 199  
200 -[[image:image-20220602103357-7.png]]
163 +[[image:image-20220723172938-9.png||height="652" width="1050"]]
201 201  
202 202  
203 203  
204 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
205 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
167 +== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
206 206  
207 207  
208 -[[image:image-20220602103844-8.png]]
170 +(% style="color:blue" %)**1.  Open project**
209 209  
210 210  
173 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
211 211  
212 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
213 -(% style="color:blue" %)**3. Select the bin file to burn**
214 214  
176 +[[image:image-20220723173341-10.png||height="581" width="1014"]]
215 215  
216 -[[image:image-20220602104144-9.png]]
217 217  
218 218  
219 -[[image:image-20220602104251-10.png]]
180 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
220 220  
221 221  
222 -[[image:image-20220602104402-11.png]]
183 +[[image:image-20220723173950-11.png||height="665" width="1012"]]
223 223  
224 224  
225 225  
226 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
227 -(% style="color:blue" %)**4. Click to start the download**
187 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
228 228  
229 -[[image:image-20220602104923-13.png]]
189 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
230 230  
191 +[[image:image-20220723175700-12.png||height="602" width="995"]]
231 231  
232 232  
233 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
234 -(% style="color:blue" %)**5. Check update process**
235 235  
195 +== 1.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
236 236  
237 -[[image:image-20220602104948-14.png]]
238 238  
198 +=== 1.8.1  Items needed for update ===
239 239  
240 240  
241 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
242 -(% style="color:blue" %)**The following picture shows that the burning is successful**
201 +1. LA66 LoRaWAN Shield
202 +1. Arduino
203 +1. USB TO TTL Adapter
243 243  
244 -[[image:image-20220602105251-15.png]]
205 +[[image:image-20220602100052-2.png||height="385" width="600"]]
245 245  
246 246  
247 247  
248 -= 3.  LA66 USB LoRaWAN Adapter =
209 +=== 1.8.2  Connection ===
249 249  
250 250  
251 -== 3.1  Overview ==
212 +[[image:image-20220602101311-3.png||height="276" width="600"]]
252 252  
253 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
254 254  
215 +(((
216 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
217 +)))
255 255  
256 -== 3.2  Features ==
219 +(((
220 +(% style="background-color:yellow" %)**GND  <-> GND
221 +TXD  <->  TXD
222 +RXD  <->  RXD**
223 +)))
257 257  
258 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
259 -* Ultra-long RF range
260 -* Support LoRaWAN v1.0.4 protocol
261 -* Support peer-to-peer protocol
262 -* TCXO crystal to ensure RF performance on low temperature
263 -* Spring RF antenna
264 -* Available in different frequency LoRaWAN frequency bands.
265 -* World-wide unique OTAA keys.
266 -* AT Command via UART-TTL interface
267 -* Firmware upgradable via UART interface
268 268  
226 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
269 269  
270 -== 3.3  Specification ==
228 +Connect USB TTL Adapter to PC after connecting the wires
271 271  
272 -* CPU: 32-bit 48 MHz
273 -* Flash: 256KB
274 -* RAM: 64KB
275 -* Input Power Range: 5v
276 -* Frequency Range: 150 MHz ~~ 960 MHz
277 -* Maximum Power +22 dBm constant RF output
278 -* High sensitivity: -148 dBm
279 -* Temperature:
280 -** Storage: -55 ~~ +125℃
281 -** Operating: -40 ~~ +85℃
282 -* Humidity:
283 -** Storage: 5 ~~ 95% (Non-Condensing)
284 -** Operating: 10 ~~ 95% (Non-Condensing)
285 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
286 -* LoRa Rx current: <9 mA
287 287  
231 +[[image:image-20220602102240-4.png||height="304" width="600"]]
288 288  
289 -== 3.4  Pin Mapping & LED ==
290 290  
291 291  
235 +=== 1.8.3  Upgrade steps ===
292 292  
293 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
294 294  
295 295  
296 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
239 +==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
297 297  
298 298  
299 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
242 +[[image:image-20220602102824-5.png||height="306" width="600"]]
300 300  
301 301  
302 -[[image:image-20220602171217-1.png||height="538" width="800"]]
303 303  
246 +==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
304 304  
305 -Open the serial port tool
306 306  
307 -[[image:image-20220602161617-8.png]]
249 +[[image:image-20220817085447-1.png]]
308 308  
309 -[[image:image-20220602161718-9.png||height="457" width="800"]]
310 310  
311 311  
312 312  
313 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
254 +==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
314 314  
315 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
316 316  
257 +(((
258 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
259 +)))
317 317  
318 -[[image:image-20220602161935-10.png||height="498" width="800"]]
319 319  
262 +[[image:image-20220602103227-6.png]]
320 320  
321 321  
322 -(% style="color:blue" %)**3. See Uplink Command**
265 +[[image:image-20220602103357-7.png]]
323 323  
324 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
325 325  
326 -example: AT+SENDB=01,02,8,05820802581ea0a5
327 327  
328 -[[image:image-20220602162157-11.png||height="497" width="800"]]
269 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
270 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
329 329  
330 330  
273 +[[image:image-20220602103844-8.png]]
331 331  
332 -(% style="color:blue" %)**4. Check to see if TTN received the message**
333 333  
334 -[[image:image-20220602162331-12.png||height="420" width="800"]]
335 335  
277 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
278 +(% style="color:blue" %)**3. Select the bin file to burn**
336 336  
337 337  
338 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
281 +[[image:image-20220602104144-9.png]]
339 339  
340 340  
341 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
284 +[[image:image-20220602104251-10.png]]
342 342  
343 343  
344 -(% style="color:red" %)**Preconditions:**
287 +[[image:image-20220602104402-11.png]]
345 345  
346 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
347 347  
348 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
349 349  
291 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
292 +(% style="color:blue" %)**4. Click to start the download**
350 350  
294 +[[image:image-20220602104923-13.png]]
351 351  
352 -(% style="color:blue" %)**Steps for usage:**
353 353  
354 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
355 355  
356 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
298 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
299 +(% style="color:blue" %)**5. Check update process**
357 357  
358 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
359 359  
302 +[[image:image-20220602104948-14.png]]
360 360  
361 361  
362 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
363 363  
306 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
307 +(% style="color:blue" %)**The following picture shows that the burning is successful**
364 364  
365 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
309 +[[image:image-20220602105251-15.png]]
366 366  
367 367  
368 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
369 369  
370 -[[image:image-20220602171233-2.png||height="538" width="800"]]
313 += 2.  FAQ =
371 371  
372 372  
316 +== 2.1  How to Compile Source Code for LA66? ==
373 373  
374 -(% style="color:blue" %)**2. Install Minicom in RPi.**
375 375  
376 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
319 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
377 377  
378 - (% style="background-color:yellow" %)**apt update**
379 379  
380 - (% style="background-color:yellow" %)**apt install minicom**
381 381  
323 += 3.  Order Info =
382 382  
383 -Use minicom to connect to the RPI's terminal
384 384  
385 -[[image:image-20220602153146-3.png||height="439" width="500"]]
326 +**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
386 386  
387 387  
388 -
389 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
390 -
391 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
392 -
393 -
394 -[[image:image-20220602154928-5.png||height="436" width="500"]]
395 -
396 -
397 -
398 -(% style="color:blue" %)**4. Send Uplink message**
399 -
400 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
401 -
402 -example: AT+SENDB=01,02,8,05820802581ea0a5
403 -
404 -
405 -[[image:image-20220602160339-6.png||height="517" width="600"]]
406 -
407 -
408 -
409 -Check to see if TTN received the message
410 -
411 -[[image:image-20220602160627-7.png||height="369" width="800"]]
412 -
413 -
414 -
415 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
416 -
417 -
418 -
419 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
420 -
421 -
422 -
423 -
424 -= 4.  Order Info =
425 -
426 -
427 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
428 -
429 -
430 430  (% style="color:blue" %)**XXX**(%%): The default frequency band
431 431  
432 432  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -441,8 +441,9 @@
441 441  
442 442  
443 443  
444 -= 5.  Reference =
343 += 4.  Reference =
445 445  
446 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
447 447  
346 +* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
347 +
448 448  
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +95.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0