Skip to Content
Last modified by Xiaoling on 2023/05/26 14:19
From version 87.1
edited by Edwin Chen
on 2022/07/11 09:10
Change comment: There is no comment for this version
To version 164.1
edited by Edwin Chen
on 2022/09/24 13:40
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 LoRaWAN Shield User Manual
Content
... ... @@ -1,28 +1,64 @@
1 -{{box cssClass="floatinginfobox" title="**Contents**"}}
1 +
2 +
3 +**Table of Contents:**
4 +
2 2  {{toc/}}
3 -{{/box}}
4 4  
5 -= LA66 LoRaWAN Module =
6 6  
7 -== What is LA66 LoRaWAN Module ==
8 8  
9 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
10 10  
11 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
10 += 1.  LA66 LoRaWAN Shield =
12 12  
12 +
13 +== 1.1  Overview ==
14 +
15 +
16 +(((
17 +[[image:image-20220715000826-2.png||height="145" width="220"]]
18 +)))
19 +
20 +(((
21 +
22 +)))
23 +
24 +(((
25 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 +)))
27 +
28 +(((
29 +(((
30 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 +)))
32 +)))
33 +
34 +(((
35 +(((
13 13  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 +)))
38 +)))
14 14  
40 +(((
41 +(((
15 15  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 +)))
44 +)))
16 16  
46 +(((
47 +(((
17 17  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
49 +)))
50 +)))
18 18  
19 19  
20 -== Features ==
21 21  
22 -* Support LoRaWAN v1.0.4 protocol
54 +== 1.2  Features ==
55 +
56 +
57 +* Arduino Shield base on LA66 LoRaWAN module
58 +* Support LoRaWAN v1.0.3 protocol
23 23  * Support peer-to-peer protocol
24 24  * TCXO crystal to ensure RF performance on low temperature
25 -* SMD Antenna pad and i-pex antenna connector
61 +* SMA connector
26 26  * Available in different frequency LoRaWAN frequency bands.
27 27  * World-wide unique OTAA keys.
28 28  * AT Command via UART-TTL interface
... ... @@ -29,8 +29,11 @@
29 29  * Firmware upgradable via UART interface
30 30  * Ultra-long RF range
31 31  
32 -== Specification ==
33 33  
69 +
70 +== 1.3  Specification ==
71 +
72 +
34 34  * CPU: 32-bit 48 MHz
35 35  * Flash: 256KB
36 36  * RAM: 64KB
... ... @@ -49,329 +49,330 @@
49 49  * LoRa Rx current: <9 mA
50 50  * I/O Voltage: 3.3v
51 51  
52 -== AT Command ==
53 53  
54 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
55 55  
93 +== 1.4  Pin Mapping & LED ==
56 56  
57 -== Dimension ==
58 58  
59 -[[image:image-20220517072526-1.png]]
96 +[[image:image-20220817085048-1.png||height="533" width="734"]]
60 60  
61 61  
62 -== Pin Mapping ==
63 63  
64 -[[image:image-20220523101537-1.png]]
100 +~1. The LED lights up red when there is an upstream data packet
101 +2. When the network is successfully connected, the green light will be on for 5 seconds
102 +3. Purple light on when receiving downlink data packets
65 65  
66 -== Land Pattern ==
67 67  
68 -[[image:image-20220517072821-2.png]]
105 +[[image:image-20220820112305-1.png||height="515" width="749"]]
69 69  
70 70  
71 71  
72 -= LA66 LoRaWAN Shield =
109 +== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
73 73  
74 -== Overview ==
75 75  
76 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
112 +**Show connection diagram：**
77 77  
78 78  
79 -== Features ==
115 +[[image:image-20220723170210-2.png||height="908" width="681"]]
80 80  
81 -* Arduino Shield base on LA66 LoRaWAN module
82 -* Support LoRaWAN v1.0.4 protocol
83 -* Support peer-to-peer protocol
84 -* TCXO crystal to ensure RF performance on low temperature
85 -* SMA connector
86 -* Available in different frequency LoRaWAN frequency bands.
87 -* World-wide unique OTAA keys.
88 -* AT Command via UART-TTL interface
89 -* Firmware upgradable via UART interface
90 -* Ultra-long RF range
91 91  
92 -== Specification ==
93 93  
94 -* CPU: 32-bit 48 MHz
95 -* Flash: 256KB
96 -* RAM: 64KB
97 -* Input Power Range: 1.8v ~~ 3.7v
98 -* Power Consumption: < 4uA.
99 -* Frequency Range: 150 MHz ~~ 960 MHz
100 -* Maximum Power +22 dBm constant RF output
101 -* High sensitivity: -148 dBm
102 -* Temperature:
103 -** Storage: -55 ~~ +125℃
104 -** Operating: -40 ~~ +85℃
105 -* Humidity:
106 -** Storage: 5 ~~ 95% (Non-Condensing)
107 -** Operating: 10 ~~ 95% (Non-Condensing)
108 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
109 -* LoRa Rx current: <9 mA
110 -* I/O Voltage: 3.3v
119 +(% style="color:blue" %)**1.  open Arduino IDE**
111 111  
112 -== Pin Mapping & LED ==
113 113  
114 -== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
122 +[[image:image-20220723170545-4.png]]
115 115  
116 -== Example: Join TTN network and send an uplink message, get downlink message. ==
117 117  
118 -== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
119 119  
120 -== Upgrade Firmware of LA66 LoRaWAN Shield ==
126 +(% style="color:blue" %)**2.  Open project**
121 121  
122 -=== Items needed for update ===
123 123  
124 -1. LA66 LoRaWAN Shield
125 -1. Arduino
126 -1. USB TO TTL Adapter
129 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
127 127  
131 +
132 +[[image:image-20220726135239-1.png]]
133 +
134 +
135 +
136 +(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
137 +
138 +
139 +[[image:image-20220726135356-2.png]]
140 +
141 +
142 +
143 +(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
144 +
145 +
146 +[[image:image-20220723172235-7.png||height="480" width="1027"]]
147 +
148 +
149 +
150 +== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
151 +
152 +
153 +(% style="color:blue" %)**1.  Open project**
154 +
155 +
156 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
157 +
158 +
159 +[[image:image-20220723172502-8.png]]
160 +
161 +
162 +
163 +(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
164 +
165 +
166 +[[image:image-20220723172938-9.png||height="652" width="1050"]]
167 +
168 +
169 +
170 +== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
171 +
172 +
173 +(% style="color:blue" %)**1.  Open project**
174 +
175 +
176 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
177 +
178 +
179 +[[image:image-20220723173341-10.png||height="581" width="1014"]]
180 +
181 +
182 +
183 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
184 +
185 +
186 +[[image:image-20220723173950-11.png||height="665" width="1012"]]
187 +
188 +
189 +
190 +
191 +
192 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
193 +
194 +
195 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
196 +
197 +
198 +[[image:image-20220723175700-12.png||height="602" width="995"]]
199 +
200 +
201 +
202 +== 1.8  Example: How to join helium ==
203 +
204 +
205 +(% style="color:blue" %)**1.  Create a new device.**
206 +
207 +
208 +[[image:image-20220907165500-1.png||height="464" width="940"]]
209 +
210 +
211 +
212 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
213 +
214 +
215 +[[image:image-20220907165837-2.png||height="375" width="809"]]
216 +
217 +
218 +
219 +(% style="color:blue" %)**3.  Use AT commands.**
220 +
221 +
128 128  [[image:image-20220602100052-2.png||height="385" width="600"]]
129 129  
130 130  
131 -=== Connection ===
132 132  
133 -[[image:image-20220602101311-3.png||height="276" width="600"]]
226 +(% style="color:#0000ff" %)**4.  Use command AT+CFG to get device configuration**
134 134  
135 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
136 -**GND  <-> GND
137 -TXD  <-> TXD
138 -RXD  <-> RXD**
139 139  
140 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
229 +[[image:image-20220907170308-3.png||height="556" width="617"]]
141 141  
142 -Connect USB TTL Adapter to PC after connecting the wires
143 143  
144 144  
145 -[[image:image-20220602102240-4.png||height="304" width="600"]]
233 +(% style="color:blue" %)**5.  Network successfully.**
146 146  
147 147  
148 -=== Upgrade steps ===
236 +[[image:image-20220907170436-4.png]]
149 149  
150 -==== Switch SW1 to put in ISP position ====
151 151  
152 -[[image:image-20220602102824-5.png||height="306" width="600"]]
153 153  
240 +(% style="color:blue" %)**6.  Send uplink using command**
154 154  
155 -==== Press the RST switch once ====
156 156  
157 -[[image:image-20220602104701-12.png||height="285" width="600"]]
243 +[[image:image-20220912084334-1.png]]
158 158  
159 159  
160 -==== Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
246 +[[image:image-20220912084412-3.png]]
161 161  
162 -**~1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
163 163  
164 -[[image:image-20220602103227-6.png]]
165 165  
166 -[[image:image-20220602103357-7.png]]
250 +[[image:image-20220907170744-6.png||height="242" width="798"]]
167 167  
168 168  
169 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
170 -**2. Select the COM port corresponding to USB TTL**
171 171  
172 -[[image:image-20220602103844-8.png]]
254 +== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
173 173  
174 174  
175 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
176 -**3. Select the bin file to burn**
257 +=== 1.9.1  Items needed for update ===
177 177  
178 -[[image:image-20220602104144-9.png]]
179 179  
180 -[[image:image-20220602104251-10.png]]
260 +1. LA66 LoRaWAN Shield
261 +1. Arduino
262 +1. USB TO TTL Adapter
181 181  
182 -[[image:image-20220602104402-11.png]]
264 +[[image:image-20220602100052-2.png||height="385" width="600"]]
183 183  
184 184  
185 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
186 -**4. Click to start the download**
187 187  
188 -[[image:image-20220602104923-13.png]]
268 +=== 1.9.2  Connection ===
189 189  
190 190  
191 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
192 -**5. Check update process**
271 +[[image:image-20220602101311-3.png||height="276" width="600"]]
193 193  
194 -[[image:image-20220602104948-14.png]]
195 195  
274 +(((
275 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
276 +)))
196 196  
197 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
198 -**The following picture shows that the burning is successful**
278 +(((
279 +(% style="background-color:yellow" %)**GND  <-> GND
280 +TXD  <->  TXD
281 +RXD  <->  RXD**
282 +)))
199 199  
200 -[[image:image-20220602105251-15.png]]
201 201  
285 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
202 202  
287 +Connect USB TTL Adapter to PC after connecting the wires
203 203  
204 -= LA66 USB LoRaWAN Adapter =
205 205  
206 -== Overview ==
290 +[[image:image-20220602102240-4.png||height="304" width="600"]]
207 207  
208 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
209 209  
210 210  
211 -== Features ==
294 +=== 1.9.3  Upgrade steps ===
212 212  
213 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
214 -* Ultra-long RF range
215 -* Support LoRaWAN v1.0.4 protocol
216 -* Support peer-to-peer protocol
217 -* TCXO crystal to ensure RF performance on low temperature
218 -* Spring RF antenna
219 -* Available in different frequency LoRaWAN frequency bands.
220 -* World-wide unique OTAA keys.
221 -* AT Command via UART-TTL interface
222 -* Firmware upgradable via UART interface
223 223  
224 -== Specification ==
225 225  
226 -* CPU: 32-bit 48 MHz
227 -* Flash: 256KB
228 -* RAM: 64KB
229 -* Input Power Range: 5v
230 -* Frequency Range: 150 MHz ~~ 960 MHz
231 -* Maximum Power +22 dBm constant RF output
232 -* High sensitivity: -148 dBm
233 -* Temperature:
234 -** Storage: -55 ~~ +125℃
235 -** Operating: -40 ~~ +85℃
236 -* Humidity:
237 -** Storage: 5 ~~ 95% (Non-Condensing)
238 -** Operating: 10 ~~ 95% (Non-Condensing)
239 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
240 -* LoRa Rx current: <9 mA
298 +==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
241 241  
242 -== Pin Mapping & LED ==
243 243  
244 -== Example Send & Get Messages via LoRaWAN in PC ==
301 +[[image:image-20220602102824-5.png||height="306" width="600"]]
245 245  
246 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
247 247  
248 -~1. Connect the LA66 USB LoRaWAN adapter to PC
249 249  
250 -[[image:image-20220602171217-1.png||height="538" width="800"]]
251 251  
252 -Open the serial port tool
306 +==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
253 253  
254 -[[image:image-20220602161617-8.png]]
255 255  
256 -[[image:image-20220602161718-9.png||height="457" width="800"]]
309 +[[image:image-20220817085447-1.png]]
257 257  
258 258  
259 -2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.
260 260  
261 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
262 262  
263 -[[image:image-20220602161935-10.png||height="498" width="800"]]
314 +==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
264 264  
265 265  
266 -3. See Uplink Command
267 267  
268 -Command format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
318 +(((
319 +(% style="color:blue" %)**1.  Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
320 +)))
269 269  
270 -example: AT+SENDB=01,02,8,05820802581ea0a5
271 271  
272 -[[image:image-20220602162157-11.png||height="497" width="800"]]
323 +[[image:image-20220602103227-6.png]]
273 273  
274 274  
275 -4. Check to see if TTN received the message
326 +[[image:image-20220602103357-7.png]]
276 276  
277 -[[image:image-20220602162331-12.png||height="420" width="800"]]
278 278  
279 279  
330 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
331 +(% style="color:blue" %)**2.  Select the COM port corresponding to USB TTL**
280 280  
281 -== Example:Send PC's CPU/RAM usage to TTN via python ==
282 282  
283 -(% class="wikigeneratedid" id="HUsepythonasanexampleFF1A" %)
284 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
334 +[[image:image-20220602103844-8.png]]
285 285  
286 -(% class="wikigeneratedid" id="HPreconditions:" %)
287 -**Preconditions:**
288 288  
289 -1.LA66 USB LoRaWAN Adapter works fine
290 290  
291 -2.LA66 USB LoRaWAN Adapter  is registered with TTN
338 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
339 +(% style="color:blue" %)**3.  Select the bin file to burn**
292 292  
293 -(% class="wikigeneratedid" id="HStepsforusage" %)
294 -**Steps for usage**
295 295  
296 -1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
342 +[[image:image-20220602104144-9.png]]
297 297  
298 -2.Run the python script in PC and see the TTN
299 299  
300 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
345 +[[image:image-20220602104251-10.png]]
301 301  
302 302  
348 +[[image:image-20220602104402-11.png]]
303 303  
304 -== Example Send & Get Messages via LoRaWAN in RPi ==
305 305  
306 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
307 307  
308 -~1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi
352 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
353 +(% style="color:blue" %)**4.  Click to start the download**
309 309  
310 -[[image:image-20220602171233-2.png||height="538" width="800"]]
311 311  
356 +[[image:image-20220602104923-13.png]]
312 312  
313 -2. Install Minicom in RPi.
314 314  
315 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
316 316  
317 -(% class="mark" %)apt update
360 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
361 +(% style="color:blue" %)**5.  Check update process**
318 318  
319 -(% class="mark" %)apt install minicom
320 320  
364 +[[image:image-20220602104948-14.png]]
321 321  
322 -Use minicom to connect to the RPI's terminal
323 323  
324 -[[image:image-20220602153146-3.png||height="439" width="500"]]
325 325  
368 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
369 +(% style="color:blue" %)**The following picture shows that the burning is successful**
326 326  
327 -3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.
328 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
329 329  
330 -[[image:image-20220602154928-5.png||height="436" width="500"]]
372 +[[image:image-20220602105251-15.png]]
331 331  
332 332  
333 -4. Send Uplink message
334 334  
335 -Format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
376 += 2.  FAQ =
336 336  
337 -example: AT+SENDB=01,02,8,05820802581ea0a5
338 338  
339 -[[image:image-20220602160339-6.png||height="517" width="600"]]
379 +== 2.1  How to Compile Source Code for LA66? ==
340 340  
341 -Check to see if TTN received the message
342 342  
343 -[[image:image-20220602160627-7.png||height="369" width="800"]]
382 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
344 344  
345 345  
385 +== 2.2 Where to find Peer-to-Peer firmware of LA66? ==
346 346  
347 -== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
348 348  
388 +* [[Download>>https://www.dropbox.com/s/270gvm9ngaj0v02/LA66_P2P_v1.0.bin?dl=0]] Peer to Peer firmware.
389 +* [[Instruction for LA66 Peer to Peer firmware>>Instruction for LA66 Peer to Peer firmware]].
349 349  
350 -== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
351 351  
392 += 3.  Order Info =
352 352  
353 353  
354 -= Order Info =
395 +**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
355 355  
356 -Part Number:
357 357  
358 -**LA66-XXX**, **LA66-LoRaWAN-Shield-XXX** or **LA66-USB-LoRaWAN-Adapter-XXX**
398 +(% style="color:blue" %)**XXX**(%%): The default frequency band
359 359  
360 -**XXX**: The default frequency band
400 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
401 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
402 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
403 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
404 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
405 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
406 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
407 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
408 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
361 361  
362 -* **AS923**: LoRaWAN AS923 band
363 -* **AU915**: LoRaWAN AU915 band
364 -* **EU433**: LoRaWAN EU433 band
365 -* **EU868**: LoRaWAN EU868 band
366 -* **KR920**: LoRaWAN KR920 band
367 -* **US915**: LoRaWAN US915 band
368 -* **IN865**: LoRaWAN IN865 band
369 -* **CN470**: LoRaWAN CN470 band
370 -* **PP**: Peer to Peer LoRa Protocol
371 371  
372 372  
373 -= Reference =
412 += 4.  Reference =
374 374  
375 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
376 376  
415 +* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
416 +
377 377  
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +44.5 KB
Content
image-20220912084334-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912084352-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content
image-20220912084412-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content