Skip to Content
Last modified by Xiaoling on 2023/05/26 14:19
From version 86.1
edited by Edwin Chen
on 2022/07/10 22:08
Change comment: There is no comment for this version
To version 164.1
edited by Edwin Chen
on 2022/09/24 13:40
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 LoRaWAN Shield User Manual
Content
... ... @@ -1,28 +1,64 @@
1 -{{box cssClass="floatinginfobox" title="**Contents**"}}
1 +
2 +
3 +**Table of Contents:**
4 +
2 2  {{toc/}}
3 -{{/box}}
4 4  
5 -= LA66 LoRaWAN Module =
6 6  
7 -== What is LA66 LoRaWAN Module ==
8 8  
9 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
10 10  
11 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
10 += 1.  LA66 LoRaWAN Shield =
12 12  
12 +
13 +== 1.1  Overview ==
14 +
15 +
16 +(((
17 +[[image:image-20220715000826-2.png||height="145" width="220"]]
18 +)))
19 +
20 +(((
21 +
22 +)))
23 +
24 +(((
25 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 +)))
27 +
28 +(((
29 +(((
30 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 +)))
32 +)))
33 +
34 +(((
35 +(((
13 13  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 +)))
38 +)))
14 14  
40 +(((
41 +(((
15 15  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 +)))
44 +)))
16 16  
46 +(((
47 +(((
17 17  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
49 +)))
50 +)))
18 18  
19 19  
20 -== Features ==
21 21  
22 -* Support LoRaWAN v1.0.4 protocol
54 +== 1.2  Features ==
55 +
56 +
57 +* Arduino Shield base on LA66 LoRaWAN module
58 +* Support LoRaWAN v1.0.3 protocol
23 23  * Support peer-to-peer protocol
24 24  * TCXO crystal to ensure RF performance on low temperature
25 -* SMD Antenna pad and i-pex antenna connector
61 +* SMA connector
26 26  * Available in different frequency LoRaWAN frequency bands.
27 27  * World-wide unique OTAA keys.
28 28  * AT Command via UART-TTL interface
... ... @@ -29,8 +29,11 @@
29 29  * Firmware upgradable via UART interface
30 30  * Ultra-long RF range
31 31  
32 -== Specification ==
33 33  
69 +
70 +== 1.3  Specification ==
71 +
72 +
34 34  * CPU: 32-bit 48 MHz
35 35  * Flash: 256KB
36 36  * RAM: 64KB
... ... @@ -49,332 +49,330 @@
49 49  * LoRa Rx current: <9 mA
50 50  * I/O Voltage: 3.3v
51 51  
52 -== AT Command ==
53 53  
54 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
55 55  
93 +== 1.4  Pin Mapping & LED ==
56 56  
57 -== Dimension ==
58 58  
59 -[[image:image-20220517072526-1.png]]
96 +[[image:image-20220817085048-1.png||height="533" width="734"]]
60 60  
61 61  
62 -== Pin Mapping ==
63 63  
64 -[[image:image-20220523101537-1.png]]
100 +~1. The LED lights up red when there is an upstream data packet
101 +2. When the network is successfully connected, the green light will be on for 5 seconds
102 +3. Purple light on when receiving downlink data packets
65 65  
66 -== Land Pattern ==
67 67  
68 -[[image:image-20220517072821-2.png]]
105 +[[image:image-20220820112305-1.png||height="515" width="749"]]
69 69  
70 70  
71 -
72 72  
73 -= LA66 LoRaWAN Shield =
109 +== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
74 74  
75 -== Overview ==
76 76  
77 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
112 +**Show connection diagram：**
78 78  
79 79  
80 -== Features ==
115 +[[image:image-20220723170210-2.png||height="908" width="681"]]
81 81  
82 -* Arduino Shield base on LA66 LoRaWAN module
83 -* Support LoRaWAN v1.0.4 protocol
84 -* Support peer-to-peer protocol
85 -* TCXO crystal to ensure RF performance on low temperature
86 -* SMA connector
87 -* Available in different frequency LoRaWAN frequency bands.
88 -* World-wide unique OTAA keys.
89 -* AT Command via UART-TTL interface
90 -* Firmware upgradable via UART interface
91 -* Ultra-long RF range
92 92  
93 -== Specification ==
94 94  
95 -* CPU: 32-bit 48 MHz
96 -* Flash: 256KB
97 -* RAM: 64KB
98 -* Input Power Range: 1.8v ~~ 3.7v
99 -* Power Consumption: < 4uA.
100 -* Frequency Range: 150 MHz ~~ 960 MHz
101 -* Maximum Power +22 dBm constant RF output
102 -* High sensitivity: -148 dBm
103 -* Temperature:
104 -** Storage: -55 ~~ +125℃
105 -** Operating: -40 ~~ +85℃
106 -* Humidity:
107 -** Storage: 5 ~~ 95% (Non-Condensing)
108 -** Operating: 10 ~~ 95% (Non-Condensing)
109 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
110 -* LoRa Rx current: <9 mA
111 -* I/O Voltage: 3.3v
119 +(% style="color:blue" %)**1.  open Arduino IDE**
112 112  
113 -== Pin Mapping & LED ==
114 114  
115 -== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
122 +[[image:image-20220723170545-4.png]]
116 116  
117 -== Example: Join TTN network and send an uplink message, get downlink message. ==
118 118  
119 -== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
120 120  
121 -== Upgrade Firmware of LA66 LoRaWAN Shield ==
126 +(% style="color:blue" %)**2.  Open project**
122 122  
123 -=== Items needed for update ===
124 124  
125 -1. LA66 LoRaWAN Shield
126 -1. Arduino
127 -1. USB TO TTL Adapter
129 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
128 128  
131 +
132 +[[image:image-20220726135239-1.png]]
133 +
134 +
135 +
136 +(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
137 +
138 +
139 +[[image:image-20220726135356-2.png]]
140 +
141 +
142 +
143 +(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
144 +
145 +
146 +[[image:image-20220723172235-7.png||height="480" width="1027"]]
147 +
148 +
149 +
150 +== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
151 +
152 +
153 +(% style="color:blue" %)**1.  Open project**
154 +
155 +
156 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
157 +
158 +
159 +[[image:image-20220723172502-8.png]]
160 +
161 +
162 +
163 +(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
164 +
165 +
166 +[[image:image-20220723172938-9.png||height="652" width="1050"]]
167 +
168 +
169 +
170 +== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
171 +
172 +
173 +(% style="color:blue" %)**1.  Open project**
174 +
175 +
176 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
177 +
178 +
179 +[[image:image-20220723173341-10.png||height="581" width="1014"]]
180 +
181 +
182 +
183 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
184 +
185 +
186 +[[image:image-20220723173950-11.png||height="665" width="1012"]]
187 +
188 +
189 +
190 +
191 +
192 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
193 +
194 +
195 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
196 +
197 +
198 +[[image:image-20220723175700-12.png||height="602" width="995"]]
199 +
200 +
201 +
202 +== 1.8  Example: How to join helium ==
203 +
204 +
205 +(% style="color:blue" %)**1.  Create a new device.**
206 +
207 +
208 +[[image:image-20220907165500-1.png||height="464" width="940"]]
209 +
210 +
211 +
212 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
213 +
214 +
215 +[[image:image-20220907165837-2.png||height="375" width="809"]]
216 +
217 +
218 +
219 +(% style="color:blue" %)**3.  Use AT commands.**
220 +
221 +
129 129  [[image:image-20220602100052-2.png||height="385" width="600"]]
130 130  
131 131  
132 -=== Connection ===
133 133  
134 -[[image:image-20220602101311-3.png||height="276" width="600"]]
226 +(% style="color:#0000ff" %)**4.  Use command AT+CFG to get device configuration**
135 135  
136 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
137 -**GND  <-> GND
138 -TXD  <-> TXD
139 -RXD  <-> RXD**
140 140  
141 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
229 +[[image:image-20220907170308-3.png||height="556" width="617"]]
142 142  
143 -Connect USB TTL Adapter to PC after connecting the wires
144 144  
145 145  
146 -[[image:image-20220602102240-4.png||height="304" width="600"]]
233 +(% style="color:blue" %)**5.  Network successfully.**
147 147  
148 148  
149 -=== Upgrade steps ===
236 +[[image:image-20220907170436-4.png]]
150 150  
151 -==== Switch SW1 to put in ISP position ====
152 152  
153 -[[image:image-20220602102824-5.png||height="306" width="600"]]
154 154  
240 +(% style="color:blue" %)**6.  Send uplink using command**
155 155  
156 -==== Press the RST switch once ====
157 157  
158 -[[image:image-20220602104701-12.png||height="285" width="600"]]
243 +[[image:image-20220912084334-1.png]]
159 159  
160 160  
161 -==== Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
246 +[[image:image-20220912084412-3.png]]
162 162  
163 -**~1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
164 164  
165 -[[image:image-20220602103227-6.png]]
166 166  
167 -[[image:image-20220602103357-7.png]]
250 +[[image:image-20220907170744-6.png||height="242" width="798"]]
168 168  
169 169  
170 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
171 -**2. Select the COM port corresponding to USB TTL**
172 172  
173 -[[image:image-20220602103844-8.png]]
254 +== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
174 174  
175 175  
176 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
177 -**3. Select the bin file to burn**
257 +=== 1.9.1  Items needed for update ===
178 178  
179 -[[image:image-20220602104144-9.png]]
180 180  
181 -[[image:image-20220602104251-10.png]]
260 +1. LA66 LoRaWAN Shield
261 +1. Arduino
262 +1. USB TO TTL Adapter
182 182  
183 -[[image:image-20220602104402-11.png]]
264 +[[image:image-20220602100052-2.png||height="385" width="600"]]
184 184  
185 185  
186 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
187 -**4. Click to start the download**
188 188  
189 -[[image:image-20220602104923-13.png]]
268 +=== 1.9.2  Connection ===
190 190  
191 191  
192 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
193 -**5. Check update process**
271 +[[image:image-20220602101311-3.png||height="276" width="600"]]
194 194  
195 -[[image:image-20220602104948-14.png]]
196 196  
274 +(((
275 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
276 +)))
197 197  
198 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
199 -**The following picture shows that the burning is successful**
278 +(((
279 +(% style="background-color:yellow" %)**GND  <-> GND
280 +TXD  <->  TXD
281 +RXD  <->  RXD**
282 +)))
200 200  
201 -[[image:image-20220602105251-15.png]]
202 202  
285 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
203 203  
204 -
287 +Connect USB TTL Adapter to PC after connecting the wires
205 205  
206 -= LA66 USB LoRaWAN Adapter =
207 207  
208 -== Overview ==
290 +[[image:image-20220602102240-4.png||height="304" width="600"]]
209 209  
210 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
211 211  
212 212  
213 -== Features ==
294 +=== 1.9.3  Upgrade steps ===
214 214  
215 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
216 -* Ultra-long RF range
217 -* Support LoRaWAN v1.0.4 protocol
218 -* Support peer-to-peer protocol
219 -* TCXO crystal to ensure RF performance on low temperature
220 -* Spring RF antenna
221 -* Available in different frequency LoRaWAN frequency bands.
222 -* World-wide unique OTAA keys.
223 -* AT Command via UART-TTL interface
224 -* Firmware upgradable via UART interface
225 225  
226 -== Specification ==
227 227  
228 -* CPU: 32-bit 48 MHz
229 -* Flash: 256KB
230 -* RAM: 64KB
231 -* Input Power Range: 5v
232 -* Frequency Range: 150 MHz ~~ 960 MHz
233 -* Maximum Power +22 dBm constant RF output
234 -* High sensitivity: -148 dBm
235 -* Temperature:
236 -** Storage: -55 ~~ +125℃
237 -** Operating: -40 ~~ +85℃
238 -* Humidity:
239 -** Storage: 5 ~~ 95% (Non-Condensing)
240 -** Operating: 10 ~~ 95% (Non-Condensing)
241 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
242 -* LoRa Rx current: <9 mA
298 +==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
243 243  
244 -== Pin Mapping & LED ==
245 245  
246 -== Example Send & Get Messages via LoRaWAN in PC ==
301 +[[image:image-20220602102824-5.png||height="306" width="600"]]
247 247  
248 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
249 249  
250 -~1. Connect the LA66 USB LoRaWAN adapter to PC
251 251  
252 -[[image:image-20220602171217-1.png||height="538" width="800"]]
253 253  
254 -Open the serial port tool
306 +==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
255 255  
256 -[[image:image-20220602161617-8.png]]
257 257  
258 -[[image:image-20220602161718-9.png||height="457" width="800"]]
309 +[[image:image-20220817085447-1.png]]
259 259  
260 260  
261 -2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.
262 262  
263 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
264 264  
265 -[[image:image-20220602161935-10.png||height="498" width="800"]]
314 +==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
266 266  
267 267  
268 -3. See Uplink Command
269 269  
270 -Command format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
318 +(((
319 +(% style="color:blue" %)**1.  Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
320 +)))
271 271  
272 -example: AT+SENDB=01,02,8,05820802581ea0a5
273 273  
274 -[[image:image-20220602162157-11.png||height="497" width="800"]]
323 +[[image:image-20220602103227-6.png]]
275 275  
276 276  
277 -4. Check to see if TTN received the message
326 +[[image:image-20220602103357-7.png]]
278 278  
279 -[[image:image-20220602162331-12.png||height="420" width="800"]]
280 280  
281 281  
330 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
331 +(% style="color:blue" %)**2.  Select the COM port corresponding to USB TTL**
282 282  
283 -== Example:Send PC's CPU/RAM usage to TTN via python ==
284 284  
285 -(% class="wikigeneratedid" id="HUsepythonasanexampleFF1A" %)
286 -**Use python as an example：**
334 +[[image:image-20220602103844-8.png]]
287 287  
288 -(% class="wikigeneratedid" id="HPreconditions:" %)
289 -**Preconditions:**
290 290  
291 -1.LA66 USB LoRaWAN Adapter works fine
292 292  
293 -2.LA66 USB LoRaWAN Adapter  is registered with TTN
338 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
339 +(% style="color:blue" %)**3.  Select the bin file to burn**
294 294  
295 -(% class="wikigeneratedid" id="HStepsforusage" %)
296 -**Steps for usage**
297 297  
298 -1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
342 +[[image:image-20220602104144-9.png]]
299 299  
300 -2.Run the python script in PC and see the TTN
301 301  
302 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
345 +[[image:image-20220602104251-10.png]]
303 303  
304 304  
348 +[[image:image-20220602104402-11.png]]
305 305  
306 -== Example Send & Get Messages via LoRaWAN in RPi ==
307 307  
308 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
309 309  
310 -~1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi
352 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
353 +(% style="color:blue" %)**4.  Click to start the download**
311 311  
312 -[[image:image-20220602171233-2.png||height="538" width="800"]]
313 313  
356 +[[image:image-20220602104923-13.png]]
314 314  
315 -2. Install Minicom in RPi.
316 316  
317 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
318 318  
319 -(% class="mark" %)apt update
360 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
361 +(% style="color:blue" %)**5.  Check update process**
320 320  
321 -(% class="mark" %)apt install minicom
322 322  
364 +[[image:image-20220602104948-14.png]]
323 323  
324 -Use minicom to connect to the RPI's terminal
325 325  
326 -[[image:image-20220602153146-3.png||height="439" width="500"]]
327 327  
368 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
369 +(% style="color:blue" %)**The following picture shows that the burning is successful**
328 328  
329 -3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.
330 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
331 331  
332 -[[image:image-20220602154928-5.png||height="436" width="500"]]
372 +[[image:image-20220602105251-15.png]]
333 333  
334 334  
335 -4. Send Uplink message
336 336  
337 -Format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
376 += 2.  FAQ =
338 338  
339 -example: AT+SENDB=01,02,8,05820802581ea0a5
340 340  
341 -[[image:image-20220602160339-6.png||height="517" width="600"]]
379 +== 2.1  How to Compile Source Code for LA66? ==
342 342  
343 -Check to see if TTN received the message
344 344  
345 -[[image:image-20220602160627-7.png||height="369" width="800"]]
382 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
346 346  
347 347  
385 +== 2.2 Where to find Peer-to-Peer firmware of LA66? ==
348 348  
349 -== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
350 350  
388 +* [[Download>>https://www.dropbox.com/s/270gvm9ngaj0v02/LA66_P2P_v1.0.bin?dl=0]] Peer to Peer firmware.
389 +* [[Instruction for LA66 Peer to Peer firmware>>Instruction for LA66 Peer to Peer firmware]].
351 351  
352 -== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
353 353  
392 += 3.  Order Info =
354 354  
355 355  
356 -= Order Info =
395 +**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
357 357  
358 -Part Number:
359 359  
360 -**LA66-XXX**, **LA66-LoRaWAN-Shield-XXX** or **LA66-USB-LoRaWAN-Adapter-XXX**
398 +(% style="color:blue" %)**XXX**(%%): The default frequency band
361 361  
362 -**XXX**: The default frequency band
400 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
401 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
402 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
403 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
404 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
405 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
406 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
407 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
408 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
363 363  
364 -* **AS923**: LoRaWAN AS923 band
365 -* **AU915**: LoRaWAN AU915 band
366 -* **EU433**: LoRaWAN EU433 band
367 -* **EU868**: LoRaWAN EU868 band
368 -* **KR920**: LoRaWAN KR920 band
369 -* **US915**: LoRaWAN US915 band
370 -* **IN865**: LoRaWAN IN865 band
371 -* **CN470**: LoRaWAN CN470 band
372 -* **PP**: Peer to Peer LoRa Protocol
373 373  
374 374  
412 += 4.  Reference =
375 375  
376 -= Reference =
377 377  
378 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
415 +* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
379 379  
380 380  
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +44.5 KB
Content
image-20220912084334-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912084352-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content
image-20220912084412-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content