Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 78.2 >
edited by Edwin Chen
on 2022/07/10 21:55
To version < 147.2 >
edited by Xiaoling
on 2022/08/17 08:50
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 LoRaWAN Shield User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -1,28 +1,64 @@
1 -{{box cssClass="floatinginfobox" title="**Contents**"}}
1 +
2 +
3 +**Table of Contents:**
4 +
2 2  {{toc/}}
3 -{{/box}}
4 4  
5 -= LA66 LoRaWAN Module =
6 6  
7 -== What is LA66 LoRaWAN Module ==
8 8  
9 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
10 10  
11 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
10 += 1.  LA66 LoRaWAN Shield =
12 12  
12 +
13 +== 1.1  Overview ==
14 +
15 +
16 +(((
17 +[[image:image-20220715000826-2.png||height="145" width="220"]]
18 +)))
19 +
20 +(((
21 +
22 +)))
23 +
24 +(((
25 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 +)))
27 +
28 +(((
29 +(((
30 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 +)))
32 +)))
33 +
34 +(((
35 +(((
13 13  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 +)))
38 +)))
14 14  
40 +(((
41 +(((
15 15  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 +)))
44 +)))
16 16  
46 +(((
47 +(((
17 17  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
49 +)))
50 +)))
18 18  
19 19  
20 -== Features ==
21 21  
22 -* Support LoRaWAN v1.0.4 protocol
54 +== 1.2  Features ==
55 +
56 +
57 +* Arduino Shield base on LA66 LoRaWAN module
58 +* Support LoRaWAN v1.0.3 protocol
23 23  * Support peer-to-peer protocol
24 24  * TCXO crystal to ensure RF performance on low temperature
25 -* SMD Antenna pad and i-pex antenna connector
61 +* SMA connector
26 26  * Available in different frequency LoRaWAN frequency bands.
27 27  * World-wide unique OTAA keys.
28 28  * AT Command via UART-TTL interface
... ... @@ -29,8 +29,10 @@
29 29  * Firmware upgradable via UART interface
30 30  * Ultra-long RF range
31 31  
32 -== Specification ==
33 33  
69 +== 1.3  Specification ==
70 +
71 +
34 34  * CPU: 32-bit 48 MHz
35 35  * Flash: 256KB
36 36  * RAM: 64KB
... ... @@ -49,355 +49,251 @@
49 49  * LoRa Rx current: <9 mA
50 50  * I/O Voltage: 3.3v
51 51  
52 -== AT Command ==
53 53  
54 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
55 55  
56 56  
57 -== Dimension ==
93 +== 1.4  Pin Mapping & LED ==
58 58  
59 -[[image:image-20220517072526-1.png]]
60 60  
96 +[[image:image-20220817085048-1.png]]
61 61  
62 -== Pin Mapping ==
98 +~1. The LED lights up red when there is an upstream data packet
99 +2. When the network is successfully connected, the green light will be on for 5 seconds
100 +3. Purple light on when receiving downlink data packets
63 63  
64 -[[image:image-20220523101537-1.png]]
65 65  
66 -== Land Pattern ==
67 67  
68 -[[image:image-20220517072821-2.png]]
104 +== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
69 69  
70 70  
71 -== Order Info ==
107 +**Show connection diagram：**
72 72  
73 -Part Number: **LA66-XXX**
74 74  
75 -**XX**: The default frequency band
110 +[[image:image-20220723170210-2.png||height="908" width="681"]]
76 76  
77 -* **AS923**: LoRaWAN AS923 band
78 -* **AU915**: LoRaWAN AU915 band
79 -* **EU433**: LoRaWAN EU433 band
80 -* **EU868**: LoRaWAN EU868 band
81 -* **KR920**: LoRaWAN KR920 band
82 -* **US915**: LoRaWAN US915 band
83 -* **IN865**: LoRaWAN IN865 band
84 -* **CN470**: LoRaWAN CN470 band
85 -* **PP**: Peer to Peer LoRa Protocol
86 86  
87 -= LA66 LoRaWAN Shield =
88 88  
89 -== Overview ==
114 +(% style="color:blue" %)**1.  open Arduino IDE**
90 90  
91 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
92 92  
117 +[[image:image-20220723170545-4.png]]
93 93  
94 -== Features ==
95 95  
96 -* Arduino Shield base on LA66 LoRaWAN module
97 -* Support LoRaWAN v1.0.4 protocol
98 -* Support peer-to-peer protocol
99 -* TCXO crystal to ensure RF performance on low temperature
100 -* SMA connector
101 -* Available in different frequency LoRaWAN frequency bands.
102 -* World-wide unique OTAA keys.
103 -* AT Command via UART-TTL interface
104 -* Firmware upgradable via UART interface
105 -* Ultra-long RF range
106 106  
107 -== Specification ==
121 +(% style="color:blue" %)**2.  Open project**
108 108  
109 -* CPU: 32-bit 48 MHz
110 -* Flash: 256KB
111 -* RAM: 64KB
112 -* Input Power Range: 1.8v ~~ 3.7v
113 -* Power Consumption: < 4uA.
114 -* Frequency Range: 150 MHz ~~ 960 MHz
115 -* Maximum Power +22 dBm constant RF output
116 -* High sensitivity: -148 dBm
117 -* Temperature:
118 -** Storage: -55 ~~ +125℃
119 -** Operating: -40 ~~ +85℃
120 -* Humidity:
121 -** Storage: 5 ~~ 95% (Non-Condensing)
122 -** Operating: 10 ~~ 95% (Non-Condensing)
123 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
124 -* LoRa Rx current: <9 mA
125 -* I/O Voltage: 3.3v
126 126  
127 -== Pin Mapping & LED ==
124 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
128 128  
129 -== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
126 +[[image:image-20220726135239-1.png]]
130 130  
131 -== Example: Join TTN network and send an uplink message, get downlink message. ==
132 132  
133 -== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
129 +(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
134 134  
135 -== Upgrade Firmware of LA66 LoRaWAN Shield ==
131 +[[image:image-20220726135356-2.png]]
136 136  
137 -=== Items needed for update ===
138 138  
139 -1. LA66 LoRaWAN Shield
140 -1. Arduino
141 -1. USB TO TTL Adapter
134 +(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
142 142  
143 -[[image:image-20220602100052-2.png||height="385" width="600"]]
144 144  
137 +[[image:image-20220723172235-7.png||height="480" width="1027"]]
145 145  
146 -=== Connection ===
147 147  
148 -[[image:image-20220602101311-3.png||height="276" width="600"]]
149 149  
150 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
151 -**GND  <-> GND
152 -TXD  <-> TXD
153 -RXD  <-> RXD**
141 +== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
154 154  
155 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
156 156  
157 -Connect USB TTL Adapter to PC after connecting the wires
144 +(% style="color:blue" %)**1.  Open project**
158 158  
159 159  
160 -[[image:image-20220602102240-4.png||height="304" width="600"]]
147 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
161 161  
162 162  
163 -=== Upgrade steps ===
150 +[[image:image-20220723172502-8.png]]
164 164  
165 -==== Switch SW1 to put in ISP position ====
166 166  
167 -[[image:image-20220602102824-5.png||height="306" width="600"]]
168 168  
154 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
169 169  
170 -==== Press the RST switch once ====
171 171  
172 -[[image:image-20220602104701-12.png||height="285" width="600"]]
157 +[[image:image-20220723172938-9.png||height="652" width="1050"]]
173 173  
174 174  
175 -==== Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
176 176  
177 -**~1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
161 +== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
178 178  
179 -[[image:image-20220602103227-6.png]]
180 180  
181 -[[image:image-20220602103357-7.png]]
164 +(% style="color:blue" %)**1.  Open project**
182 182  
183 183  
184 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
185 -**2. Select the COM port corresponding to USB TTL**
167 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
186 186  
187 -[[image:image-20220602103844-8.png]]
188 188  
170 +[[image:image-20220723173341-10.png||height="581" width="1014"]]
189 189  
190 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
191 -**3. Select the bin file to burn**
192 192  
193 -[[image:image-20220602104144-9.png]]
194 194  
195 -[[image:image-20220602104251-10.png]]
174 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
196 196  
197 -[[image:image-20220602104402-11.png]]
198 198  
177 +[[image:image-20220723173950-11.png||height="665" width="1012"]]
199 199  
200 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
201 -**4. Click to start the download**
202 202  
203 -[[image:image-20220602104923-13.png]]
204 204  
181 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
205 205  
206 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
207 -**5. Check update process**
183 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
208 208  
209 -[[image:image-20220602104948-14.png]]
185 +[[image:image-20220723175700-12.png||height="602" width="995"]]
210 210  
211 211  
212 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
213 -**The following picture shows that the burning is successful**
214 214  
215 -[[image:image-20220602105251-15.png]]
189 +== 1.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
216 216  
217 217  
218 -== Order Info ==
192 +=== 1.8.1  Items needed for update ===
219 219  
220 -Part Number: **LA66-LoRaWAN-Shield-XXX**
221 221  
222 -**XX**: The default frequency band
195 +1. LA66 LoRaWAN Shield
196 +1. Arduino
197 +1. USB TO TTL Adapter
223 223  
224 -* **AS923**: LoRaWAN AS923 band
225 -* **AU915**: LoRaWAN AU915 band
226 -* **EU433**: LoRaWAN EU433 band
227 -* **EU868**: LoRaWAN EU868 band
228 -* **KR920**: LoRaWAN KR920 band
229 -* **US915**: LoRaWAN US915 band
230 -* **IN865**: LoRaWAN IN865 band
231 -* **CN470**: LoRaWAN CN470 band
232 -* **PP**: Peer to Peer LoRa Protocol
199 +[[image:image-20220602100052-2.png||height="385" width="600"]]
233 233  
234 -== Package Info ==
235 235  
236 -* LA66 LoRaWAN Shield x 1
237 -* RF Antenna x 1
238 238  
239 -= LA66 USB LoRaWAN Adapter =
203 +=== 1.8.2  Connection ===
240 240  
241 -== Overview ==
242 242  
243 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
206 +[[image:image-20220602101311-3.png||height="276" width="600"]]
244 244  
245 245  
246 -== Features ==
209 +(((
210 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
211 +)))
247 247  
248 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
249 -* Ultra-long RF range
250 -* Support LoRaWAN v1.0.4 protocol
251 -* Support peer-to-peer protocol
252 -* TCXO crystal to ensure RF performance on low temperature
253 -* Spring RF antenna
254 -* Available in different frequency LoRaWAN frequency bands.
255 -* World-wide unique OTAA keys.
256 -* AT Command via UART-TTL interface
257 -* Firmware upgradable via UART interface
213 +(((
214 +(% style="background-color:yellow" %)**GND  <-> GND
215 +TXD  <->  TXD
216 +RXD  <->  RXD**
217 +)))
258 258  
259 -== Specification ==
260 260  
261 -* CPU: 32-bit 48 MHz
262 -* Flash: 256KB
263 -* RAM: 64KB
264 -* Input Power Range: 5v
265 -* Frequency Range: 150 MHz ~~ 960 MHz
266 -* Maximum Power +22 dBm constant RF output
267 -* High sensitivity: -148 dBm
268 -* Temperature:
269 -** Storage: -55 ~~ +125℃
270 -** Operating: -40 ~~ +85℃
271 -* Humidity:
272 -** Storage: 5 ~~ 95% (Non-Condensing)
273 -** Operating: 10 ~~ 95% (Non-Condensing)
274 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
275 -* LoRa Rx current: <9 mA
220 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
276 276  
277 -== Pin Mapping & LED ==
222 +Connect USB TTL Adapter to PC after connecting the wires
278 278  
279 -== Example Send & Get Messages via LoRaWAN in PC ==
280 280  
281 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
225 +[[image:image-20220602102240-4.png||height="304" width="600"]]
282 282  
283 -~1. Connect the LA66 USB LoRaWAN adapter to PC
284 284  
285 -[[image:image-20220602171217-1.png||height="538" width="800"]]
286 286  
287 -Open the serial port tool
229 +=== 1.8.3  Upgrade steps ===
288 288  
289 -[[image:image-20220602161617-8.png]]
290 290  
291 -[[image:image-20220602161718-9.png||height="457" width="800"]]
292 292  
233 +==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
293 293  
294 -2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.
295 295  
296 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
236 +[[image:image-20220602102824-5.png||height="306" width="600"]]
297 297  
298 -[[image:image-20220602161935-10.png||height="498" width="800"]]
299 299  
300 300  
301 -3. See Uplink Command
240 +==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
302 302  
303 -Command format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
304 304  
305 -example: AT+SENDB=01,02,8,05820802581ea0a5
243 +[[image:image-20220602104701-12.png||height="285" width="600"]]
306 306  
307 -[[image:image-20220602162157-11.png||height="497" width="800"]]
308 308  
309 309  
310 -4. Check to see if TTN received the message
247 +==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
311 311  
312 -[[image:image-20220602162331-12.png||height="420" width="800"]]
313 313  
250 +(((
251 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
252 +)))
314 314  
315 315  
316 -== Example Send & Get Messages via LoRaWAN in RPi ==
255 +[[image:image-20220602103227-6.png]]
317 317  
318 -Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi
319 319  
320 -[[image:image-20220602171233-2.png||height="538" width="800"]]
258 +[[image:image-20220602103357-7.png]]
321 321  
322 -Log in to the RPI's terminal and connect to the serial port
323 323  
324 -[[image:image-20220602153146-3.png]]
325 325  
326 -Press the reset switch RST on the LA66 LoRa Shield.
327 -The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
262 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
263 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
328 328  
329 -[[image:image-20220602154928-5.png]]
330 330  
331 -send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
266 +[[image:image-20220602103844-8.png]]
332 332  
333 -example: AT+SENDB=01,02,8,05820802581ea0a5
334 334  
335 -[[image:image-20220602160339-6.png]]
336 336  
337 -Check to see if TTN received the message
270 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
271 +(% style="color:blue" %)**3. Select the bin file to burn**
338 338  
339 -[[image:image-20220602160627-7.png||height="468" width="1013"]]
340 340  
341 -=== Install Minicom ===
274 +[[image:image-20220602104144-9.png]]
342 342  
343 -Enter the following command in the RPI terminal
344 344  
345 -apt update
277 +[[image:image-20220602104251-10.png]]
346 346  
347 -[[image:image-20220602143155-1.png]]
348 348  
349 -apt install minicom
280 +[[image:image-20220602104402-11.png]]
350 350  
351 -[[image:image-20220602143744-2.png]]
352 352  
353 -=== Send PC's CPU/RAM usage to TTN via script. ===
354 354  
355 -==== Take python as an example： ====
284 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
285 +(% style="color:blue" %)**4. Click to start the download**
356 356  
357 -===== Preconditions: =====
287 +[[image:image-20220602104923-13.png]]
358 358  
359 -1.LA66 USB LoRaWAN Adapter works fine
360 360  
361 -2.LA66 USB LoRaWAN Adapter  is registered with TTN
362 362  
363 -===== Steps for usage =====
291 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
292 +(% style="color:blue" %)**5. Check update process**
364 364  
365 -1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
366 366  
367 -2.Run the script and see the TTN
295 +[[image:image-20220602104948-14.png]]
368 368  
369 -[[image:image-20220602115852-3.png]]
370 370  
371 371  
299 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
300 +(% style="color:blue" %)**The following picture shows that the burning is successful**
372 372  
373 -== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
302 +[[image:image-20220602105251-15.png]]
374 374  
375 375  
376 -== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
377 377  
306 += 2.  FAQ =
378 378  
379 379  
380 -== Order Info ==
309 +== 2.1  How to Compile Source Code for LA66? ==
381 381  
382 -Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
383 383  
384 -**XX**: The default frequency band
312 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
385 385  
386 -* **AS923**: LoRaWAN AS923 band
387 -* **AU915**: LoRaWAN AU915 band
388 -* **EU433**: LoRaWAN EU433 band
389 -* **EU868**: LoRaWAN EU868 band
390 -* **KR920**: LoRaWAN KR920 band
391 -* **US915**: LoRaWAN US915 band
392 -* **IN865**: LoRaWAN IN865 band
393 -* **CN470**: LoRaWAN CN470 band
394 -* **PP**: Peer to Peer LoRa Protocol
395 395  
396 -== Package Info ==
397 397  
398 -* LA66 USB LoRaWAN Adapter x 1
316 += 3.  Order Info =
399 399  
400 -= Reference =
401 401  
402 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
319 +**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
403 403  
321 +
322 +(% style="color:blue" %)**XXX**(%%): The default frequency band
323 +
324 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
325 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
326 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
327 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
328 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
329 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
330 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
331 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
332 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
333 +
334 += 4.  Reference =
335 +
336 +
337 +* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0