Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 78.2 >
edited by Edwin Chen
on 2022/07/10 21:55
To version < 146.4 >
edited by Xiaoling
on 2022/08/16 10:59
>
Change comment: Updated the relative links.

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 LoRaWAN Shield User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -1,24 +1,58 @@
1 -{{box cssClass="floatinginfobox" title="**Contents**"}}
1 +
2 +
3 +**Table of Contents:**
4 +
2 2  {{toc/}}
3 -{{/box}}
4 4  
5 -= LA66 LoRaWAN Module =
6 6  
7 -== What is LA66 LoRaWAN Module ==
8 8  
9 += 1.  LA66 LoRaWAN Module =
10 +
11 +
12 +== 1.1  What is LA66 LoRaWAN Module ==
13 +
14 +
15 +(((
16 +(((
17 +[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 +)))
19 +
20 +(((
21 +
22 +)))
23 +
24 +(((
9 9  (% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 +)))
27 +)))
10 10  
11 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
29 +(((
30 +(((
31 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 +)))
33 +)))
12 12  
35 +(((
36 +(((
13 13  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 +)))
14 14  
40 +(((
15 15  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 +)))
43 +)))
16 16  
45 +(((
46 +(((
17 17  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 +)))
49 +)))
18 18  
19 19  
20 -== Features ==
21 21  
53 +== 1.2  Features ==
54 +
55 +
22 22  * Support LoRaWAN v1.0.4 protocol
23 23  * Support peer-to-peer protocol
24 24  * TCXO crystal to ensure RF performance on low temperature
... ... @@ -29,8 +29,9 @@
29 29  * Firmware upgradable via UART interface
30 30  * Ultra-long RF range
31 31  
32 -== Specification ==
66 +== 1.3  Specification ==
33 33  
68 +
34 34  * CPU: 32-bit 48 MHz
35 35  * Flash: 256KB
36 36  * RAM: 64KB
... ... @@ -49,50 +49,79 @@
49 49  * LoRa Rx current: <9 mA
50 50  * I/O Voltage: 3.3v
51 51  
52 -== AT Command ==
87 +== 1.4  AT Command ==
53 53  
89 +
54 54  AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
55 55  
56 56  
57 -== Dimension ==
58 58  
59 -[[image:image-20220517072526-1.png]]
94 +== 1.5  Dimension ==
60 60  
96 +[[image:image-20220718094750-3.png]]
61 61  
62 -== Pin Mapping ==
63 63  
64 -[[image:image-20220523101537-1.png]]
65 65  
66 -== Land Pattern ==
100 +== 1.6  Pin Mapping ==
67 67  
102 +[[image:image-20220720111850-1.png]]
103 +
104 +
105 +
106 +== 1.7  Land Pattern ==
107 +
108 +
68 68  [[image:image-20220517072821-2.png]]
69 69  
70 70  
71 -== Order Info ==
72 72  
73 -Part Number: **LA66-XXX**
113 += 2.  LA66 LoRaWAN Shield =
74 74  
75 -**XX**: The default frequency band
76 76  
77 -* **AS923**: LoRaWAN AS923 band
78 -* **AU915**: LoRaWAN AU915 band
79 -* **EU433**: LoRaWAN EU433 band
80 -* **EU868**: LoRaWAN EU868 band
81 -* **KR920**: LoRaWAN KR920 band
82 -* **US915**: LoRaWAN US915 band
83 -* **IN865**: LoRaWAN IN865 band
84 -* **CN470**: LoRaWAN CN470 band
85 -* **PP**: Peer to Peer LoRa Protocol
116 +== 2.1  Overview ==
86 86  
87 -= LA66 LoRaWAN Shield =
88 88  
89 -== Overview ==
119 +(((
120 +[[image:image-20220715000826-2.png||height="145" width="220"]]
121 +)))
90 90  
91 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
123 +(((
124 +
125 +)))
92 92  
127 +(((
128 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
129 +)))
93 93  
94 -== Features ==
131 +(((
132 +(((
133 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
134 +)))
135 +)))
95 95  
137 +(((
138 +(((
139 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
140 +)))
141 +)))
142 +
143 +(((
144 +(((
145 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
146 +)))
147 +)))
148 +
149 +(((
150 +(((
151 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
152 +)))
153 +)))
154 +
155 +
156 +
157 +== 2.2  Features ==
158 +
159 +
96 96  * Arduino Shield base on LA66 LoRaWAN module
97 97  * Support LoRaWAN v1.0.4 protocol
98 98  * Support peer-to-peer protocol
... ... @@ -104,8 +104,9 @@
104 104  * Firmware upgradable via UART interface
105 105  * Ultra-long RF range
106 106  
107 -== Specification ==
171 +== 2.3  Specification ==
108 108  
173 +
109 109  * CPU: 32-bit 48 MHz
110 110  * Flash: 256KB
111 111  * RAM: 64KB
... ... @@ -124,18 +124,108 @@
124 124  * LoRa Rx current: <9 mA
125 125  * I/O Voltage: 3.3v
126 126  
127 -== Pin Mapping & LED ==
192 +== 2.4  Pin Mapping & LED ==
128 128  
129 -== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
130 130  
131 -== Example: Join TTN network and send an uplink message, get downlink message. ==
195 +[[image:image-20220814101457-1.png||height="553" width="761"]]
132 132  
133 -== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
197 +~1. The LED lights up red when there is an upstream data packet
198 +2. When the network is successfully connected, the green light will be on for 5 seconds
199 +3. Purple light on when receiving downlink data packets
134 134  
135 -== Upgrade Firmware of LA66 LoRaWAN Shield ==
136 136  
137 -=== Items needed for update ===
138 138  
203 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
204 +
205 +
206 +**Show connection diagram：**
207 +
208 +
209 +[[image:image-20220723170210-2.png||height="908" width="681"]]
210 +
211 +
212 +
213 +(% style="color:blue" %)**1.  open Arduino IDE**
214 +
215 +
216 +[[image:image-20220723170545-4.png]]
217 +
218 +
219 +
220 +(% style="color:blue" %)**2.  Open project**
221 +
222 +
223 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
224 +
225 +[[image:image-20220726135239-1.png]]
226 +
227 +
228 +(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
229 +
230 +[[image:image-20220726135356-2.png]]
231 +
232 +
233 +(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
234 +
235 +
236 +[[image:image-20220723172235-7.png||height="480" width="1027"]]
237 +
238 +
239 +
240 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
241 +
242 +
243 +(% style="color:blue" %)**1.  Open project**
244 +
245 +
246 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
247 +
248 +
249 +[[image:image-20220723172502-8.png]]
250 +
251 +
252 +
253 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
254 +
255 +
256 +[[image:image-20220723172938-9.png||height="652" width="1050"]]
257 +
258 +
259 +
260 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
261 +
262 +
263 +(% style="color:blue" %)**1.  Open project**
264 +
265 +
266 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
267 +
268 +
269 +[[image:image-20220723173341-10.png||height="581" width="1014"]]
270 +
271 +
272 +
273 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
274 +
275 +
276 +[[image:image-20220723173950-11.png||height="665" width="1012"]]
277 +
278 +
279 +
280 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
281 +
282 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
283 +
284 +[[image:image-20220723175700-12.png||height="602" width="995"]]
285 +
286 +
287 +
288 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
289 +
290 +
291 +=== 2.8.1  Items needed for update ===
292 +
293 +
139 139  1. LA66 LoRaWAN Shield
140 140  1. Arduino
141 141  1. USB TO TTL Adapter
... ... @@ -143,15 +143,24 @@
143 143  [[image:image-20220602100052-2.png||height="385" width="600"]]
144 144  
145 145  
146 -=== Connection ===
147 147  
302 +=== 2.8.2  Connection ===
303 +
304 +
148 148  [[image:image-20220602101311-3.png||height="276" width="600"]]
149 149  
150 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
151 -**GND  <-> GND
152 -TXD  <-> TXD
153 -RXD  <-> RXD**
154 154  
308 +(((
309 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
310 +)))
311 +
312 +(((
313 +(% style="background-color:yellow" %)**GND  <-> GND
314 +TXD  <->  TXD
315 +RXD  <->  RXD**
316 +)))
317 +
318 +
155 155  Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
156 156  
157 157  Connect USB TTL Adapter to PC after connecting the wires
... ... @@ -160,91 +160,117 @@
160 160  [[image:image-20220602102240-4.png||height="304" width="600"]]
161 161  
162 162  
163 -=== Upgrade steps ===
164 164  
165 -==== Switch SW1 to put in ISP position ====
328 +=== 2.8.3  Upgrade steps ===
166 166  
330 +
331 +==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
332 +
333 +
167 167  [[image:image-20220602102824-5.png||height="306" width="600"]]
168 168  
169 169  
170 -==== Press the RST switch once ====
171 171  
338 +==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
339 +
340 +
172 172  [[image:image-20220602104701-12.png||height="285" width="600"]]
173 173  
174 174  
175 -==== Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
176 176  
177 -**~1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
345 +==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
178 178  
347 +
348 +(((
349 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
350 +)))
351 +
352 +
179 179  [[image:image-20220602103227-6.png]]
180 180  
355 +
181 181  [[image:image-20220602103357-7.png]]
182 182  
183 183  
359 +
184 184  (% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
185 -**2. Select the COM port corresponding to USB TTL**
361 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
186 186  
363 +
187 187  [[image:image-20220602103844-8.png]]
188 188  
189 189  
367 +
190 190  (% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
191 -**3. Select the bin file to burn**
369 +(% style="color:blue" %)**3. Select the bin file to burn**
192 192  
371 +
193 193  [[image:image-20220602104144-9.png]]
194 194  
374 +
195 195  [[image:image-20220602104251-10.png]]
196 196  
377 +
197 197  [[image:image-20220602104402-11.png]]
198 198  
199 199  
381 +
200 200  (% class="wikigeneratedid" id="HClicktostartthedownload" %)
201 -**4. Click to start the download**
383 +(% style="color:blue" %)**4. Click to start the download**
202 202  
203 203  [[image:image-20220602104923-13.png]]
204 204  
205 205  
388 +
206 206  (% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
207 -**5. Check update process**
390 +(% style="color:blue" %)**5. Check update process**
208 208  
392 +
209 209  [[image:image-20220602104948-14.png]]
210 210  
211 211  
396 +
212 212  (% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
213 -**The following picture shows that the burning is successful**
398 +(% style="color:blue" %)**The following picture shows that the burning is successful**
214 214  
215 215  [[image:image-20220602105251-15.png]]
216 216  
217 217  
218 -== Order Info ==
219 219  
220 -Part Number: **LA66-LoRaWAN-Shield-XXX**
404 += 3.  LA66 USB LoRaWAN Adapter =
221 221  
222 -**XX**: The default frequency band
223 223  
224 -* **AS923**: LoRaWAN AS923 band
225 -* **AU915**: LoRaWAN AU915 band
226 -* **EU433**: LoRaWAN EU433 band
227 -* **EU868**: LoRaWAN EU868 band
228 -* **KR920**: LoRaWAN KR920 band
229 -* **US915**: LoRaWAN US915 band
230 -* **IN865**: LoRaWAN IN865 band
231 -* **CN470**: LoRaWAN CN470 band
232 -* **PP**: Peer to Peer LoRa Protocol
407 +== 3.1  Overview ==
233 233  
234 -== Package Info ==
235 235  
236 -* LA66 LoRaWAN Shield x 1
237 -* RF Antenna x 1
410 +[[image:image-20220715001142-3.png||height="145" width="220"]]
238 238  
239 -= LA66 USB LoRaWAN Adapter =
240 240  
241 -== Overview ==
413 +(((
414 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
415 +)))
242 242  
243 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
417 +(((
418 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
419 +)))
244 244  
421 +(((
422 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
423 +)))
245 245  
246 -== Features ==
425 +(((
426 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
427 +)))
247 247  
429 +(((
430 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
431 +)))
432 +
433 +
434 +
435 +== 3.2  Features ==
436 +
437 +
248 248  * LoRaWAN USB adapter base on LA66 LoRaWAN module
249 249  * Ultra-long RF range
250 250  * Support LoRaWAN v1.0.4 protocol
... ... @@ -255,9 +255,11 @@
255 255  * World-wide unique OTAA keys.
256 256  * AT Command via UART-TTL interface
257 257  * Firmware upgradable via UART interface
448 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
258 258  
259 -== Specification ==
450 +== 3.3  Specification ==
260 260  
452 +
261 261  * CPU: 32-bit 48 MHz
262 262  * Flash: 256KB
263 263  * RAM: 64KB
... ... @@ -274,16 +274,25 @@
274 274  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
275 275  * LoRa Rx current: <9 mA
276 276  
277 -== Pin Mapping & LED ==
469 +== 3.4  Pin Mapping & LED ==
278 278  
279 -== Example Send & Get Messages via LoRaWAN in PC ==
471 +[[image:image-20220813183239-3.png||height="526" width="662"]]
280 280  
473 +
474 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
475 +
476 +
477 +(((
281 281  Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
479 +)))
282 282  
283 -~1. Connect the LA66 USB LoRaWAN adapter to PC
284 284  
285 -[[image:image-20220602171217-1.png||height="538" width="800"]]
482 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
286 286  
484 +
485 +[[image:image-20220723100027-1.png]]
486 +
487 +
287 287  Open the serial port tool
288 288  
289 289  [[image:image-20220602161617-8.png]]
... ... @@ -291,113 +291,256 @@
291 291  [[image:image-20220602161718-9.png||height="457" width="800"]]
292 292  
293 293  
294 -2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.
295 295  
496 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
497 +
296 296  The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
297 297  
500 +
298 298  [[image:image-20220602161935-10.png||height="498" width="800"]]
299 299  
300 300  
301 -3. See Uplink Command
302 302  
303 -Command format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
505 +(% style="color:blue" %)**3. See Uplink Command**
304 304  
507 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
508 +
305 305  example: AT+SENDB=01,02,8,05820802581ea0a5
306 306  
307 307  [[image:image-20220602162157-11.png||height="497" width="800"]]
308 308  
309 309  
310 -4. Check to see if TTN received the message
311 311  
515 +(% style="color:blue" %)**4. Check to see if TTN received the message**
516 +
312 312  [[image:image-20220602162331-12.png||height="420" width="800"]]
313 313  
314 314  
315 315  
316 -== Example Send & Get Messages via LoRaWAN in RPi ==
521 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
317 317  
318 -Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi
319 319  
320 -[[image:image-20220602171233-2.png||height="538" width="800"]]
524 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
321 321  
322 -Log in to the RPI's terminal and connect to the serial port
526 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
323 323  
324 -[[image:image-20220602153146-3.png]]
528 +(% style="color:red" %)**Preconditions:**
325 325  
326 -Press the reset switch RST on the LA66 LoRa Shield.
327 -The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
530 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
328 328  
329 -[[image:image-20220602154928-5.png]]
532 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
330 330  
331 -send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
332 332  
535 +
536 +(% style="color:blue" %)**Steps for usage:**
537 +
538 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
539 +
540 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
541 +
542 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
543 +
544 +
545 +
546 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
547 +
548 +
549 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
550 +
551 +
552 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
553 +
554 +[[image:image-20220723100439-2.png]]
555 +
556 +
557 +
558 +(% style="color:blue" %)**2. Install Minicom in RPi.**
559 +
560 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
561 +
562 + (% style="background-color:yellow" %)**apt update**
563 +
564 + (% style="background-color:yellow" %)**apt install minicom**
565 +
566 +
567 +Use minicom to connect to the RPI's terminal
568 +
569 +[[image:image-20220602153146-3.png||height="439" width="500"]]
570 +
571 +
572 +
573 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
574 +
575 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
576 +
577 +
578 +[[image:image-20220602154928-5.png||height="436" width="500"]]
579 +
580 +
581 +
582 +(% style="color:blue" %)**4. Send Uplink message**
583 +
584 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
585 +
333 333  example: AT+SENDB=01,02,8,05820802581ea0a5
334 334  
335 -[[image:image-20220602160339-6.png]]
336 336  
589 +[[image:image-20220602160339-6.png||height="517" width="600"]]
590 +
591 +
592 +
337 337  Check to see if TTN received the message
338 338  
339 -[[image:image-20220602160627-7.png||height="468" width="1013"]]
595 +[[image:image-20220602160627-7.png||height="369" width="800"]]
340 340  
341 -=== Install Minicom ===
342 342  
343 -Enter the following command in the RPI terminal
344 344  
345 -apt update
599 +== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
346 346  
347 -[[image:image-20220602143155-1.png]]
348 348  
349 -apt install minicom
602 +=== 3.8.1  Hardware and Software Connection ===
350 350  
351 -[[image:image-20220602143744-2.png]]
352 352  
353 -=== Send PC's CPU/RAM usage to TTN via script. ===
605 +==== (% style="color:blue" %)**Overview：**(%%) ====
354 354  
355 -==== Take python as an example： ====
356 356  
357 -===== Preconditions: =====
608 +(((
609 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
358 358  
359 -1.LA66 USB LoRaWAN Adapter works fine
611 +* Send real-time location information of mobile phone to LoRaWAN network.
612 +* Check LoRaWAN network signal strengh.
613 +* Manually send messages to LoRaWAN network.
614 +)))
360 360  
361 -2.LA66 USB LoRaWAN Adapter  is registered with TTN
362 362  
363 -===== Steps for usage =====
364 364  
365 -1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
618 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
366 366  
367 -2.Run the script and see the TTN
620 +A USB to Type-C adapter is needed to connect to a Mobile phone.
368 368  
369 -[[image:image-20220602115852-3.png]]
622 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
370 370  
624 +[[image:image-20220813174353-2.png||height="360" width="313"]]
371 371  
372 372  
373 -== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
627 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
374 374  
629 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
375 375  
376 -== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
631 +[[image:image-20220813173738-1.png]]
377 377  
378 378  
634 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
379 379  
380 -== Order Info ==
636 +Function and page introduction
381 381  
382 -Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
638 +[[image:image-20220723113448-7.png||height="995" width="450"]]
383 383  
384 -**XX**: The default frequency band
640 +**Block Explain:**
385 385  
386 -* **AS923**: LoRaWAN AS923 band
387 -* **AU915**: LoRaWAN AU915 band
388 -* **EU433**: LoRaWAN EU433 band
389 -* **EU868**: LoRaWAN EU868 band
390 -* **KR920**: LoRaWAN KR920 band
391 -* **US915**: LoRaWAN US915 band
392 -* **IN865**: LoRaWAN IN865 band
393 -* **CN470**: LoRaWAN CN470 band
394 -* **PP**: Peer to Peer LoRa Protocol
642 +1.  Display LA66 USB LoRaWAN Module connection status
395 395  
396 -== Package Info ==
644 +2.  Check and reconnect
397 397  
398 -* LA66 USB LoRaWAN Adapter x 1
646 +3.  Turn send timestamps on or off
399 399  
400 -= Reference =
648 +4.  Display LoRaWan connection status
401 401  
402 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
650 +5.  Check LoRaWan connection status
403 403  
652 +6.  The RSSI value of the node when the ACK is received
653 +
654 +7.  Node's Signal Strength Icon
655 +
656 +8.  Configure Location Uplink Interval
657 +
658 +9.  AT command input box
659 +
660 +10.  Send Button:  Send input box info to LA66 USB Adapter
661 +
662 +11.  Output Log from LA66 USB adapter
663 +
664 +12.  clear log button
665 +
666 +13.  exit button
667 +
668 +
669 +LA66 USB LoRaWAN Module not connected
670 +
671 +[[image:image-20220723110520-5.png||height="677" width="508"]]
672 +
673 +
674 +
675 +Connect LA66 USB LoRaWAN Module
676 +
677 +[[image:image-20220723110626-6.png||height="681" width="511"]]
678 +
679 +
680 +
681 +=== 3.8.2 Send data to TTNv3 and plot location info in Node-Red ===
682 +
683 +
684 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
685 +
686 +[[image:image-20220723134549-8.png]]
687 +
688 +
689 +
690 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
691 +
692 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
693 +
694 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
695 +
696 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
697 +
698 +
699 +Example output in NodeRed is as below:
700 +
701 +[[image:image-20220723144339-1.png]]
702 +
703 +
704 +
705 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
706 +
707 +
708 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
709 +
710 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
711 +
712 +[[image:image-20220723150132-2.png]]
713 +
714 +
715 +
716 += 4.  FAQ =
717 +
718 +
719 +== 4.1  How to Compile Source Code for LA66? ==
720 +
721 +
722 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
723 +
724 +
725 +
726 += 5.  Order Info =
727 +
728 +
729 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
730 +
731 +
732 +(% style="color:blue" %)**XXX**(%%): The default frequency band
733 +
734 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
735 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
736 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
737 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
738 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
739 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
740 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
741 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
742 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
743 +
744 += 6.  Reference =
745 +
746 +
747 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0