Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 78.1 >
edited by Edwin Chen
on 2022/07/10 21:41
To version < 147.3 >
edited by Xiaoling
on 2022/08/17 08:53
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 LoRaWAN Shield User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -1,28 +1,64 @@
1 -{{box cssClass="floatinginfobox" title="**Contents**"}}
1 +
2 +
3 +**Table of Contents:**
4 +
2 2  {{toc/}}
3 -{{/box}}
4 4  
5 -= LA66 LoRaWAN Module =
6 6  
7 -== What is LA66 LoRaWAN Module ==
8 8  
9 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
10 10  
11 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
10 += 1.  LA66 LoRaWAN Shield =
12 12  
12 +
13 +== 1.1  Overview ==
14 +
15 +
16 +(((
17 +[[image:image-20220715000826-2.png||height="145" width="220"]]
18 +)))
19 +
20 +(((
21 +
22 +)))
23 +
24 +(((
25 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 +)))
27 +
28 +(((
29 +(((
30 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 +)))
32 +)))
33 +
34 +(((
35 +(((
13 13  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 +)))
38 +)))
14 14  
40 +(((
41 +(((
15 15  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 +)))
44 +)))
16 16  
46 +(((
47 +(((
17 17  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
49 +)))
50 +)))
18 18  
19 19  
20 -== Features ==
21 21  
22 -* Support LoRaWAN v1.0.4 protocol
54 +== 1.2  Features ==
55 +
56 +
57 +* Arduino Shield base on LA66 LoRaWAN module
58 +* Support LoRaWAN v1.0.3 protocol
23 23  * Support peer-to-peer protocol
24 24  * TCXO crystal to ensure RF performance on low temperature
25 -* SMD Antenna pad and i-pex antenna connector
61 +* SMA connector
26 26  * Available in different frequency LoRaWAN frequency bands.
27 27  * World-wide unique OTAA keys.
28 28  * AT Command via UART-TTL interface
... ... @@ -29,8 +29,10 @@
29 29  * Firmware upgradable via UART interface
30 30  * Ultra-long RF range
31 31  
32 -== Specification ==
33 33  
69 +== 1.3  Specification ==
70 +
71 +
34 34  * CPU: 32-bit 48 MHz
35 35  * Flash: 256KB
36 36  * RAM: 64KB
... ... @@ -49,348 +49,252 @@
49 49  * LoRa Rx current: <9 mA
50 50  * I/O Voltage: 3.3v
51 51  
52 -== AT Command ==
53 53  
54 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
55 55  
56 56  
57 -== Dimension ==
93 +== 1.4  Pin Mapping & LED ==
58 58  
59 -[[image:image-20220517072526-1.png]]
60 60  
96 +[[image:image-20220817085048-1.png]]
61 61  
62 -== Pin Mapping ==
63 63  
64 -[[image:image-20220523101537-1.png]]
99 +~1. The LED lights up red when there is an upstream data packet
100 +2. When the network is successfully connected, the green light will be on for 5 seconds
101 +3. Purple light on when receiving downlink data packets
65 65  
66 -== Land Pattern ==
67 67  
68 -[[image:image-20220517072821-2.png]]
69 69  
105 +== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
70 70  
71 -== Order Info ==
72 72  
73 -Part Number: **LA66-XXX**
108 +**Show connection diagram：**
74 74  
75 -**XX**: The default frequency band
76 76  
77 -* **AS923**: LoRaWAN AS923 band
78 -* **AU915**: LoRaWAN AU915 band
79 -* **EU433**: LoRaWAN EU433 band
80 -* **EU868**: LoRaWAN EU868 band
81 -* **KR920**: LoRaWAN KR920 band
82 -* **US915**: LoRaWAN US915 band
83 -* **IN865**: LoRaWAN IN865 band
84 -* **CN470**: LoRaWAN CN470 band
85 -* **PP**: Peer to Peer LoRa Protocol
111 +[[image:image-20220723170210-2.png||height="908" width="681"]]
86 86  
87 -= LA66 LoRaWAN Shield =
88 88  
89 -== Overview ==
90 90  
91 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
115 +(% style="color:blue" %)**1.  open Arduino IDE**
92 92  
93 93  
94 -== Features ==
118 +[[image:image-20220723170545-4.png]]
95 95  
96 -* Arduino Shield base on LA66 LoRaWAN module
97 -* Support LoRaWAN v1.0.4 protocol
98 -* Support peer-to-peer protocol
99 -* TCXO crystal to ensure RF performance on low temperature
100 -* SMA connector
101 -* Available in different frequency LoRaWAN frequency bands.
102 -* World-wide unique OTAA keys.
103 -* AT Command via UART-TTL interface
104 -* Firmware upgradable via UART interface
105 -* Ultra-long RF range
106 106  
107 -== Specification ==
108 108  
109 -* CPU: 32-bit 48 MHz
110 -* Flash: 256KB
111 -* RAM: 64KB
112 -* Input Power Range: 1.8v ~~ 3.7v
113 -* Power Consumption: < 4uA.
114 -* Frequency Range: 150 MHz ~~ 960 MHz
115 -* Maximum Power +22 dBm constant RF output
116 -* High sensitivity: -148 dBm
117 -* Temperature:
118 -** Storage: -55 ~~ +125℃
119 -** Operating: -40 ~~ +85℃
120 -* Humidity:
121 -** Storage: 5 ~~ 95% (Non-Condensing)
122 -** Operating: 10 ~~ 95% (Non-Condensing)
123 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
124 -* LoRa Rx current: <9 mA
125 -* I/O Voltage: 3.3v
122 +(% style="color:blue" %)**2.  Open project**
126 126  
127 -== Pin Mapping & LED ==
128 128  
129 -== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
125 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
130 130  
131 -== Example: Join TTN network and send an uplink message, get downlink message. ==
127 +[[image:image-20220726135239-1.png]]
132 132  
133 -== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
134 134  
135 -== Upgrade Firmware of LA66 LoRaWAN Shield ==
130 +(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
136 136  
137 -=== Items needed for update ===
132 +[[image:image-20220726135356-2.png]]
138 138  
139 -1. LA66 LoRaWAN Shield
140 -1. Arduino
141 -1. USB TO TTL Adapter
142 142  
143 -[[image:image-20220602100052-2.png||height="385" width="600"]]
135 +(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
144 144  
145 145  
146 -=== Connection ===
138 +[[image:image-20220723172235-7.png||height="480" width="1027"]]
147 147  
148 -[[image:image-20220602101311-3.png||height="276" width="600"]]
149 149  
150 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
151 -**GND  <-> GND
152 -TXD  <-> TXD
153 -RXD  <-> RXD**
154 154  
155 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
142 +== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
156 156  
157 -Connect USB TTL Adapter to PC after connecting the wires
158 158  
145 +(% style="color:blue" %)**1.  Open project**
159 159  
160 -[[image:image-20220602102240-4.png||height="304" width="600"]]
161 161  
148 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
162 162  
163 -=== Upgrade steps ===
164 164  
165 -==== Switch SW1 to put in ISP position ====
151 +[[image:image-20220723172502-8.png]]
166 166  
167 -[[image:image-20220602102824-5.png||height="306" width="600"]]
168 168  
169 169  
170 -==== Press the RST switch once ====
155 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
171 171  
172 -[[image:image-20220602104701-12.png||height="285" width="600"]]
173 173  
158 +[[image:image-20220723172938-9.png||height="652" width="1050"]]
174 174  
175 -==== Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
176 176  
177 -**~1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
178 178  
179 -[[image:image-20220602103227-6.png]]
162 +== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
180 180  
181 -[[image:image-20220602103357-7.png]]
182 182  
165 +(% style="color:blue" %)**1.  Open project**
183 183  
184 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
185 -**2. Select the COM port corresponding to USB TTL**
186 186  
187 -[[image:image-20220602103844-8.png]]
168 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
188 188  
189 189  
190 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
191 -**3. Select the bin file to burn**
171 +[[image:image-20220723173341-10.png||height="581" width="1014"]]
192 192  
193 -[[image:image-20220602104144-9.png]]
194 194  
195 -[[image:image-20220602104251-10.png]]
196 196  
197 -[[image:image-20220602104402-11.png]]
175 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
198 198  
199 199  
200 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
201 -**4. Click to start the download**
178 +[[image:image-20220723173950-11.png||height="665" width="1012"]]
202 202  
203 -[[image:image-20220602104923-13.png]]
204 204  
205 205  
206 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
207 -**5. Check update process**
182 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
208 208  
209 -[[image:image-20220602104948-14.png]]
184 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
210 210  
186 +[[image:image-20220723175700-12.png||height="602" width="995"]]
211 211  
212 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
213 -**The following picture shows that the burning is successful**
214 214  
215 -[[image:image-20220602105251-15.png]]
216 216  
190 +== 1.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
217 217  
218 -== Order Info ==
219 219  
220 -Part Number: **LA66-LoRaWAN-Shield-XXX**
193 +=== 1.8.1  Items needed for update ===
221 221  
222 -**XX**: The default frequency band
223 223  
224 -* **AS923**: LoRaWAN AS923 band
225 -* **AU915**: LoRaWAN AU915 band
226 -* **EU433**: LoRaWAN EU433 band
227 -* **EU868**: LoRaWAN EU868 band
228 -* **KR920**: LoRaWAN KR920 band
229 -* **US915**: LoRaWAN US915 band
230 -* **IN865**: LoRaWAN IN865 band
231 -* **CN470**: LoRaWAN CN470 band
232 -* **PP**: Peer to Peer LoRa Protocol
196 +1. LA66 LoRaWAN Shield
197 +1. Arduino
198 +1. USB TO TTL Adapter
233 233  
234 -== Package Info ==
200 +[[image:image-20220602100052-2.png||height="385" width="600"]]
235 235  
236 -* LA66 LoRaWAN Shield x 1
237 -* RF Antenna x 1
238 238  
239 -= LA66 USB LoRaWAN Adapter =
240 240  
241 -== Overview ==
204 +=== 1.8.2  Connection ===
242 242  
243 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
244 244  
207 +[[image:image-20220602101311-3.png||height="276" width="600"]]
245 245  
246 -== Features ==
247 247  
248 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
249 -* Ultra-long RF range
250 -* Support LoRaWAN v1.0.4 protocol
251 -* Support peer-to-peer protocol
252 -* TCXO crystal to ensure RF performance on low temperature
253 -* Spring RF antenna
254 -* Available in different frequency LoRaWAN frequency bands.
255 -* World-wide unique OTAA keys.
256 -* AT Command via UART-TTL interface
257 -* Firmware upgradable via UART interface
210 +(((
211 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
212 +)))
258 258  
259 -== Specification ==
214 +(((
215 +(% style="background-color:yellow" %)**GND  <-> GND
216 +TXD  <->  TXD
217 +RXD  <->  RXD**
218 +)))
260 260  
261 -* CPU: 32-bit 48 MHz
262 -* Flash: 256KB
263 -* RAM: 64KB
264 -* Input Power Range: 5v
265 -* Frequency Range: 150 MHz ~~ 960 MHz
266 -* Maximum Power +22 dBm constant RF output
267 -* High sensitivity: -148 dBm
268 -* Temperature:
269 -** Storage: -55 ~~ +125℃
270 -** Operating: -40 ~~ +85℃
271 -* Humidity:
272 -** Storage: 5 ~~ 95% (Non-Condensing)
273 -** Operating: 10 ~~ 95% (Non-Condensing)
274 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
275 -* LoRa Rx current: <9 mA
276 276  
277 -== Pin Mapping & LED ==
221 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
278 278  
279 -== Example Send & Get Messages via LoRaWAN in PC ==
223 +Connect USB TTL Adapter to PC after connecting the wires
280 280  
281 -Connect the LA66 LoRa Shield to the PC
282 282  
283 -[[image:image-20220602171217-1.png||height="615" width="915"]]
226 +[[image:image-20220602102240-4.png||height="304" width="600"]]
284 284  
285 -Open the serial port tool
286 286  
287 -[[image:image-20220602161617-8.png]]
288 288  
289 -[[image:image-20220602161718-9.png||height="529" width="927"]]
230 +=== 1.8.3  Upgrade steps ===
290 290  
291 -Press the reset switch RST on the LA66 LoRa Shield.
292 292  
293 -The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
294 294  
295 -[[image:image-20220602161935-10.png]]
234 +==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
296 296  
297 -send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
298 298  
299 -example: AT+SENDB=01,02,8,05820802581ea0a5
237 +[[image:image-20220602102824-5.png||height="306" width="600"]]
300 300  
301 -[[image:image-20220602162157-11.png]]
302 302  
303 -Check to see if TTN received the message
304 304  
305 -[[image:image-20220602162331-12.png||height="547" width="1044"]]
241 +==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
306 306  
307 -== Example Send & Get Messages via LoRaWAN in RPi ==
308 308  
309 -Connect the LA66 LoRa Shield to the RPI
244 +[[image:image-20220602104701-12.png||height="285" width="600"]]
310 310  
311 -[[image:image-20220602171233-2.png||height="592" width="881"]]
312 312  
313 -Log in to the RPI's terminal and connect to the serial port
314 314  
315 -[[image:image-20220602153146-3.png]]
248 +==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
316 316  
317 -Press the reset switch RST on the LA66 LoRa Shield.
318 -The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
319 319  
320 -[[image:image-20220602154928-5.png]]
251 +(((
252 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
253 +)))
321 321  
322 -send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
323 323  
324 -example: AT+SENDB=01,02,8,05820802581ea0a5
256 +[[image:image-20220602103227-6.png]]
325 325  
326 -[[image:image-20220602160339-6.png]]
327 327  
328 -Check to see if TTN received the message
259 +[[image:image-20220602103357-7.png]]
329 329  
330 -[[image:image-20220602160627-7.png||height="468" width="1013"]]
331 331  
332 -=== Install Minicom ===
333 333  
334 -Enter the following command in the RPI terminal
263 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
264 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
335 335  
336 -apt update
337 337  
338 -[[image:image-20220602143155-1.png]]
267 +[[image:image-20220602103844-8.png]]
339 339  
340 -apt install minicom
341 341  
342 -[[image:image-20220602143744-2.png]]
343 343  
344 -=== Send PC's CPU/RAM usage to TTN via script. ===
271 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
272 +(% style="color:blue" %)**3. Select the bin file to burn**
345 345  
346 -==== Take python as an example： ====
347 347  
348 -===== Preconditions: =====
275 +[[image:image-20220602104144-9.png]]
349 349  
350 -1.LA66 USB LoRaWAN Adapter works fine
351 351  
352 -2.LA66 USB LoRaWAN Adapter  is registered with TTN
278 +[[image:image-20220602104251-10.png]]
353 353  
354 -===== Steps for usage =====
355 355  
356 -1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
281 +[[image:image-20220602104402-11.png]]
357 357  
358 -2.Run the script and see the TTN
359 359  
360 -[[image:image-20220602115852-3.png]]
361 361  
285 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
286 +(% style="color:blue" %)**4. Click to start the download**
362 362  
288 +[[image:image-20220602104923-13.png]]
363 363  
364 -== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
365 365  
366 366  
367 -== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
292 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
293 +(% style="color:blue" %)**5. Check update process**
368 368  
369 369  
296 +[[image:image-20220602104948-14.png]]
370 370  
371 -== Order Info ==
372 372  
373 -Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
374 374  
375 -**XX**: The default frequency band
300 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
301 +(% style="color:blue" %)**The following picture shows that the burning is successful**
376 376  
377 -* **AS923**: LoRaWAN AS923 band
378 -* **AU915**: LoRaWAN AU915 band
379 -* **EU433**: LoRaWAN EU433 band
380 -* **EU868**: LoRaWAN EU868 band
381 -* **KR920**: LoRaWAN KR920 band
382 -* **US915**: LoRaWAN US915 band
383 -* **IN865**: LoRaWAN IN865 band
384 -* **CN470**: LoRaWAN CN470 band
385 -* **PP**: Peer to Peer LoRa Protocol
303 +[[image:image-20220602105251-15.png]]
386 386  
387 -== Package Info ==
388 388  
389 -* LA66 USB LoRaWAN Adapter x 1
390 390  
307 += 2.  FAQ =
391 391  
392 -= Reference =
393 393  
394 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
310 +== 2.1  How to Compile Source Code for LA66? ==
395 395  
396 -
312 +
313 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
314 +
315 +
316 +
317 += 3.  Order Info =
318 +
319 +
320 +**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
321 +
322 +
323 +(% style="color:blue" %)**XXX**(%%): The default frequency band
324 +
325 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
326 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
327 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
328 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
329 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
330 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
331 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
332 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
333 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
334 +
335 += 4.  Reference =
336 +
337 +
338 +* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0