Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 78.1 >
edited by Edwin Chen
on 2022/07/10 21:41
To version < 139.2 >
edited by Edwin Chen
on 2022/08/13 18:09
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,24 +1,58 @@
1 -{{box cssClass="floatinginfobox" title="**Contents**"}}
1 +
2 +
3 +**Table of Contents:**
4 +
2 2  {{toc/}}
3 -{{/box}}
4 4  
5 -= LA66 LoRaWAN Module =
6 6  
7 -== What is LA66 LoRaWAN Module ==
8 8  
9 += 1.  LA66 LoRaWAN Module =
10 +
11 +
12 +== 1.1  What is LA66 LoRaWAN Module ==
13 +
14 +
15 +(((
16 +(((
17 +[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 +)))
19 +
20 +(((
21 +
22 +)))
23 +
24 +(((
9 9  (% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 +)))
27 +)))
10 10  
11 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
29 +(((
30 +(((
31 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 +)))
33 +)))
12 12  
35 +(((
36 +(((
13 13  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 +)))
14 14  
40 +(((
15 15  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 +)))
43 +)))
16 16  
45 +(((
46 +(((
17 17  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 +)))
49 +)))
18 18  
19 19  
20 -== Features ==
21 21  
53 +== 1.2  Features ==
54 +
55 +
22 22  * Support LoRaWAN v1.0.4 protocol
23 23  * Support peer-to-peer protocol
24 24  * TCXO crystal to ensure RF performance on low temperature
... ... @@ -29,8 +29,12 @@
29 29  * Firmware upgradable via UART interface
30 30  * Ultra-long RF range
31 31  
32 -== Specification ==
33 33  
67 +
68 +
69 +== 1.3  Specification ==
70 +
71 +
34 34  * CPU: 32-bit 48 MHz
35 35  * Flash: 256KB
36 36  * RAM: 64KB
... ... @@ -49,50 +49,82 @@
49 49  * LoRa Rx current: <9 mA
50 50  * I/O Voltage: 3.3v
51 51  
52 -== AT Command ==
53 53  
91 +
92 +
93 +== 1.4  AT Command ==
94 +
95 +
54 54  AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
55 55  
56 56  
57 -== Dimension ==
58 58  
59 -[[image:image-20220517072526-1.png]]
100 +== 1.5  Dimension ==
60 60  
102 +[[image:image-20220718094750-3.png]]
61 61  
62 -== Pin Mapping ==
63 63  
64 -[[image:image-20220523101537-1.png]]
65 65  
66 -== Land Pattern ==
106 +== 1.6  Pin Mapping ==
67 67  
108 +[[image:image-20220720111850-1.png]]
109 +
110 +
111 +
112 +== 1.7  Land Pattern ==
113 +
114 +
68 68  [[image:image-20220517072821-2.png]]
69 69  
70 70  
71 -== Order Info ==
72 72  
73 -Part Number: **LA66-XXX**
119 += 2.  LA66 LoRaWAN Shield =
74 74  
75 -**XX**: The default frequency band
76 76  
77 -* **AS923**: LoRaWAN AS923 band
78 -* **AU915**: LoRaWAN AU915 band
79 -* **EU433**: LoRaWAN EU433 band
80 -* **EU868**: LoRaWAN EU868 band
81 -* **KR920**: LoRaWAN KR920 band
82 -* **US915**: LoRaWAN US915 band
83 -* **IN865**: LoRaWAN IN865 band
84 -* **CN470**: LoRaWAN CN470 band
85 -* **PP**: Peer to Peer LoRa Protocol
122 +== 2.1  Overview ==
86 86  
87 -= LA66 LoRaWAN Shield =
88 88  
89 -== Overview ==
125 +(((
126 +[[image:image-20220715000826-2.png||height="145" width="220"]]
127 +)))
90 90  
91 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
129 +(((
130 +
131 +)))
92 92  
133 +(((
134 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
135 +)))
93 93  
94 -== Features ==
137 +(((
138 +(((
139 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
140 +)))
141 +)))
95 95  
143 +(((
144 +(((
145 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
146 +)))
147 +)))
148 +
149 +(((
150 +(((
151 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
152 +)))
153 +)))
154 +
155 +(((
156 +(((
157 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
158 +)))
159 +)))
160 +
161 +
162 +
163 +== 2.2  Features ==
164 +
165 +
96 96  * Arduino Shield base on LA66 LoRaWAN module
97 97  * Support LoRaWAN v1.0.4 protocol
98 98  * Support peer-to-peer protocol
... ... @@ -104,8 +104,12 @@
104 104  * Firmware upgradable via UART interface
105 105  * Ultra-long RF range
106 106  
107 -== Specification ==
108 108  
178 +
179 +
180 +== 2.3  Specification ==
181 +
182 +
109 109  * CPU: 32-bit 48 MHz
110 110  * Flash: 256KB
111 111  * RAM: 64KB
... ... @@ -124,18 +124,109 @@
124 124  * LoRa Rx current: <9 mA
125 125  * I/O Voltage: 3.3v
126 126  
127 -== Pin Mapping & LED ==
128 128  
129 -== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
130 130  
131 -== Example: Join TTN network and send an uplink message, get downlink message. ==
132 132  
133 -== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
204 +== 2.4  LED ==
134 134  
135 -== Upgrade Firmware of LA66 LoRaWAN Shield ==
136 136  
137 -=== Items needed for update ===
207 +~1. The LED lights up red when there is an upstream data packet
208 +2. When the network is successfully connected, the green light will be on for 5 seconds
209 +3. Purple light on when receiving downlink data packets
138 138  
211 +
212 +
213 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
214 +
215 +
216 +**Show connection diagram：**
217 +
218 +
219 +[[image:image-20220723170210-2.png||height="908" width="681"]]
220 +
221 +
222 +
223 +(% style="color:blue" %)**1.  open Arduino IDE**
224 +
225 +
226 +[[image:image-20220723170545-4.png]]
227 +
228 +
229 +
230 +(% style="color:blue" %)**2.  Open project**
231 +
232 +
233 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
234 +
235 +[[image:image-20220726135239-1.png]]
236 +
237 +
238 +(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
239 +
240 +[[image:image-20220726135356-2.png]]
241 +
242 +
243 +(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
244 +
245 +
246 +[[image:image-20220723172235-7.png||height="480" width="1027"]]
247 +
248 +
249 +
250 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
251 +
252 +
253 +(% style="color:blue" %)**1.  Open project**
254 +
255 +
256 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
257 +
258 +
259 +[[image:image-20220723172502-8.png]]
260 +
261 +
262 +
263 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
264 +
265 +
266 +[[image:image-20220723172938-9.png||height="652" width="1050"]]
267 +
268 +
269 +
270 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
271 +
272 +
273 +(% style="color:blue" %)**1.  Open project**
274 +
275 +
276 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
277 +
278 +
279 +[[image:image-20220723173341-10.png||height="581" width="1014"]]
280 +
281 +
282 +
283 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
284 +
285 +
286 +[[image:image-20220723173950-11.png||height="665" width="1012"]]
287 +
288 +
289 +
290 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
291 +
292 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
293 +
294 +[[image:image-20220723175700-12.png||height="602" width="995"]]
295 +
296 +
297 +
298 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
299 +
300 +
301 +=== 2.8.1  Items needed for update ===
302 +
303 +
139 139  1. LA66 LoRaWAN Shield
140 140  1. Arduino
141 141  1. USB TO TTL Adapter
... ... @@ -143,15 +143,24 @@
143 143  [[image:image-20220602100052-2.png||height="385" width="600"]]
144 144  
145 145  
146 -=== Connection ===
147 147  
312 +=== 2.8.2  Connection ===
313 +
314 +
148 148  [[image:image-20220602101311-3.png||height="276" width="600"]]
149 149  
150 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
151 -**GND  <-> GND
152 -TXD  <-> TXD
153 -RXD  <-> RXD**
154 154  
318 +(((
319 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
320 +)))
321 +
322 +(((
323 +(% style="background-color:yellow" %)**GND  <-> GND
324 +TXD  <->  TXD
325 +RXD  <->  RXD**
326 +)))
327 +
328 +
155 155  Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
156 156  
157 157  Connect USB TTL Adapter to PC after connecting the wires
... ... @@ -160,91 +160,117 @@
160 160  [[image:image-20220602102240-4.png||height="304" width="600"]]
161 161  
162 162  
163 -=== Upgrade steps ===
164 164  
165 -==== Switch SW1 to put in ISP position ====
338 +=== 2.8.3  Upgrade steps ===
166 166  
340 +
341 +==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
342 +
343 +
167 167  [[image:image-20220602102824-5.png||height="306" width="600"]]
168 168  
169 169  
170 -==== Press the RST switch once ====
171 171  
348 +==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
349 +
350 +
172 172  [[image:image-20220602104701-12.png||height="285" width="600"]]
173 173  
174 174  
175 -==== Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
176 176  
177 -**~1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
355 +==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
178 178  
357 +
358 +(((
359 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
360 +)))
361 +
362 +
179 179  [[image:image-20220602103227-6.png]]
180 180  
365 +
181 181  [[image:image-20220602103357-7.png]]
182 182  
183 183  
369 +
184 184  (% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
185 -**2. Select the COM port corresponding to USB TTL**
371 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
186 186  
373 +
187 187  [[image:image-20220602103844-8.png]]
188 188  
189 189  
377 +
190 190  (% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
191 -**3. Select the bin file to burn**
379 +(% style="color:blue" %)**3. Select the bin file to burn**
192 192  
381 +
193 193  [[image:image-20220602104144-9.png]]
194 194  
384 +
195 195  [[image:image-20220602104251-10.png]]
196 196  
387 +
197 197  [[image:image-20220602104402-11.png]]
198 198  
199 199  
391 +
200 200  (% class="wikigeneratedid" id="HClicktostartthedownload" %)
201 -**4. Click to start the download**
393 +(% style="color:blue" %)**4. Click to start the download**
202 202  
203 203  [[image:image-20220602104923-13.png]]
204 204  
205 205  
398 +
206 206  (% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
207 -**5. Check update process**
400 +(% style="color:blue" %)**5. Check update process**
208 208  
402 +
209 209  [[image:image-20220602104948-14.png]]
210 210  
211 211  
406 +
212 212  (% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
213 -**The following picture shows that the burning is successful**
408 +(% style="color:blue" %)**The following picture shows that the burning is successful**
214 214  
215 215  [[image:image-20220602105251-15.png]]
216 216  
217 217  
218 -== Order Info ==
219 219  
220 -Part Number: **LA66-LoRaWAN-Shield-XXX**
414 += 3.  LA66 USB LoRaWAN Adapter =
221 221  
222 -**XX**: The default frequency band
223 223  
224 -* **AS923**: LoRaWAN AS923 band
225 -* **AU915**: LoRaWAN AU915 band
226 -* **EU433**: LoRaWAN EU433 band
227 -* **EU868**: LoRaWAN EU868 band
228 -* **KR920**: LoRaWAN KR920 band
229 -* **US915**: LoRaWAN US915 band
230 -* **IN865**: LoRaWAN IN865 band
231 -* **CN470**: LoRaWAN CN470 band
232 -* **PP**: Peer to Peer LoRa Protocol
417 +== 3.1  Overview ==
233 233  
234 -== Package Info ==
235 235  
236 -* LA66 LoRaWAN Shield x 1
237 -* RF Antenna x 1
420 +[[image:image-20220715001142-3.png||height="145" width="220"]]
238 238  
239 -= LA66 USB LoRaWAN Adapter =
240 240  
241 -== Overview ==
423 +(((
424 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
425 +)))
242 242  
243 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
427 +(((
428 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
429 +)))
244 244  
431 +(((
432 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
433 +)))
245 245  
246 -== Features ==
435 +(((
436 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
437 +)))
247 247  
439 +(((
440 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
441 +)))
442 +
443 +
444 +
445 +== 3.2  Features ==
446 +
447 +
248 248  * LoRaWAN USB adapter base on LA66 LoRaWAN module
249 249  * Ultra-long RF range
250 250  * Support LoRaWAN v1.0.4 protocol
... ... @@ -255,9 +255,14 @@
255 255  * World-wide unique OTAA keys.
256 256  * AT Command via UART-TTL interface
257 257  * Firmware upgradable via UART interface
458 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
258 258  
259 -== Specification ==
260 260  
461 +
462 +
463 +== 3.3  Specification ==
464 +
465 +
261 261  * CPU: 32-bit 48 MHz
262 262  * Flash: 256KB
263 263  * RAM: 64KB
... ... @@ -274,123 +274,287 @@
274 274  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
275 275  * LoRa Rx current: <9 mA
276 276  
277 -== Pin Mapping & LED ==
278 278  
279 -== Example Send & Get Messages via LoRaWAN in PC ==
280 280  
281 -Connect the LA66 LoRa Shield to the PC
282 282  
283 -[[image:image-20220602171217-1.png||height="615" width="915"]]
485 +== 3.4  Pin Mapping & LED ==
284 284  
487 +
488 +
489 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
490 +
491 +
492 +(((
493 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
494 +)))
495 +
496 +
497 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
498 +
499 +
500 +[[image:image-20220723100027-1.png]]
501 +
502 +
285 285  Open the serial port tool
286 286  
287 287  [[image:image-20220602161617-8.png]]
288 288  
289 -[[image:image-20220602161718-9.png||height="529" width="927"]]
507 +[[image:image-20220602161718-9.png||height="457" width="800"]]
290 290  
291 -Press the reset switch RST on the LA66 LoRa Shield.
292 292  
293 -The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
294 294  
295 -[[image:image-20220602161935-10.png]]
511 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
296 296  
297 -send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
513 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
298 298  
515 +
516 +[[image:image-20220602161935-10.png||height="498" width="800"]]
517 +
518 +
519 +
520 +(% style="color:blue" %)**3. See Uplink Command**
521 +
522 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
523 +
299 299  example: AT+SENDB=01,02,8,05820802581ea0a5
300 300  
301 -[[image:image-20220602162157-11.png]]
526 +[[image:image-20220602162157-11.png||height="497" width="800"]]
302 302  
303 -Check to see if TTN received the message
304 304  
305 -[[image:image-20220602162331-12.png||height="547" width="1044"]]
306 306  
307 -== Example Send & Get Messages via LoRaWAN in RPi ==
530 +(% style="color:blue" %)**4. Check to see if TTN received the message**
308 308  
309 -Connect the LA66 LoRa Shield to the RPI
532 +[[image:image-20220602162331-12.png||height="420" width="800"]]
310 310  
311 -[[image:image-20220602171233-2.png||height="592" width="881"]]
312 312  
313 -Log in to the RPI's terminal and connect to the serial port
314 314  
315 -[[image:image-20220602153146-3.png]]
536 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
316 316  
317 -Press the reset switch RST on the LA66 LoRa Shield.
318 -The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
319 319  
320 -[[image:image-20220602154928-5.png]]
539 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
321 321  
322 -send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
541 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
323 323  
543 +(% style="color:red" %)**Preconditions:**
544 +
545 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
546 +
547 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
548 +
549 +
550 +
551 +(% style="color:blue" %)**Steps for usage:**
552 +
553 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
554 +
555 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
556 +
557 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
558 +
559 +
560 +
561 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
562 +
563 +
564 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
565 +
566 +
567 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
568 +
569 +[[image:image-20220723100439-2.png]]
570 +
571 +
572 +
573 +(% style="color:blue" %)**2. Install Minicom in RPi.**
574 +
575 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
576 +
577 + (% style="background-color:yellow" %)**apt update**
578 +
579 + (% style="background-color:yellow" %)**apt install minicom**
580 +
581 +
582 +Use minicom to connect to the RPI's terminal
583 +
584 +[[image:image-20220602153146-3.png||height="439" width="500"]]
585 +
586 +
587 +
588 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
589 +
590 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
591 +
592 +
593 +[[image:image-20220602154928-5.png||height="436" width="500"]]
594 +
595 +
596 +
597 +(% style="color:blue" %)**4. Send Uplink message**
598 +
599 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
600 +
324 324  example: AT+SENDB=01,02,8,05820802581ea0a5
325 325  
326 -[[image:image-20220602160339-6.png]]
327 327  
604 +[[image:image-20220602160339-6.png||height="517" width="600"]]
605 +
606 +
607 +
328 328  Check to see if TTN received the message
329 329  
330 -[[image:image-20220602160627-7.png||height="468" width="1013"]]
610 +[[image:image-20220602160627-7.png||height="369" width="800"]]
331 331  
332 -=== Install Minicom ===
333 333  
334 -Enter the following command in the RPI terminal
335 335  
336 -apt update
614 +== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
337 337  
338 -[[image:image-20220602143155-1.png]]
339 339  
340 -apt install minicom
617 +=== 3.8.1  Hardware and Software Connection ===
341 341  
342 -[[image:image-20220602143744-2.png]]
343 343  
344 -=== Send PC's CPU/RAM usage to TTN via script. ===
620 +==== (% style="color:blue" %)**Overview：**(%%) ====
345 345  
346 -==== Take python as an example： ====
347 347  
348 -===== Preconditions: =====
623 +(((
624 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
349 349  
350 -1.LA66 USB LoRaWAN Adapter works fine
626 +* Send real-time location information of mobile phone to LoRaWAN network.
627 +* Check LoRaWAN network signal strengh.
628 +* Manually send messages to LoRaWAN network.
629 +)))
351 351  
352 -2.LA66 USB LoRaWAN Adapter  is registered with TTN
353 353  
354 -===== Steps for usage =====
355 355  
356 -1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
633 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
357 357  
358 -2.Run the script and see the TTN
635 +A USB to Type-C adapter is needed to connect to a Mobile phone.
359 359  
360 -[[image:image-20220602115852-3.png]]
637 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
361 361  
639 +[[image:image-20220813174353-2.png||height="360" width="313"]]
362 362  
363 363  
364 -== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
642 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
365 365  
644 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
366 366  
367 -== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
646 +[[image:image-20220813173738-1.png]]
368 368  
369 369  
649 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
370 370  
371 -== Order Info ==
651 +Function and page introduction
372 372  
373 -Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
653 +[[image:image-20220723113448-7.png||height="995" width="450"]]
374 374  
375 -**XX**: The default frequency band
655 +**Block Explain:**
376 376  
377 -* **AS923**: LoRaWAN AS923 band
378 -* **AU915**: LoRaWAN AU915 band
379 -* **EU433**: LoRaWAN EU433 band
380 -* **EU868**: LoRaWAN EU868 band
381 -* **KR920**: LoRaWAN KR920 band
382 -* **US915**: LoRaWAN US915 band
383 -* **IN865**: LoRaWAN IN865 band
384 -* **CN470**: LoRaWAN CN470 band
385 -* **PP**: Peer to Peer LoRa Protocol
657 +1.  Display LA66 USB LoRaWAN Module connection status
386 386  
387 -== Package Info ==
659 +2.  Check and reconnect
388 388  
389 -* LA66 USB LoRaWAN Adapter x 1
661 +3.  Turn send timestamps on or off
390 390  
663 +4.  Display LoRaWan connection status
391 391  
392 -= Reference =
665 +5.  Check LoRaWan connection status
393 393  
394 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
667 +6.  The RSSI value of the node when the ACK is received
395 395  
396 -
669 +7.  Node's Signal Strength Icon
670 +
671 +8.  Configure Location Uplink Interval
672 +
673 +9.  AT command input box
674 +
675 +10.  Send Button:  Send input box info to LA66 USB Adapter
676 +
677 +11.  Output Log from LA66 USB adapter
678 +
679 +12.  clear log button
680 +
681 +13.  exit button
682 +
683 +
684 +LA66 USB LoRaWAN Module not connected
685 +
686 +[[image:image-20220723110520-5.png||height="677" width="508"]]
687 +
688 +
689 +
690 +Connect LA66 USB LoRaWAN Module
691 +
692 +[[image:image-20220723110626-6.png||height="681" width="511"]]
693 +
694 +
695 +
696 +=== 3.8.2  Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Adapter and integrate it into Node-RED ===
697 +
698 +
699 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
700 +
701 +[[image:image-20220723134549-8.png]]
702 +
703 +
704 +
705 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
706 +
707 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
708 +
709 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
710 +
711 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
712 +
713 +
714 +Example output in NodeRed is as below:
715 +
716 +[[image:image-20220723144339-1.png]]
717 +
718 +
719 +
720 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
721 +
722 +
723 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
724 +
725 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
726 +
727 +[[image:image-20220723150132-2.png]]
728 +
729 +
730 +
731 += 4.  FAQ =
732 +
733 +
734 +== 4.1  How to Compile Source Code for LA66? ==
735 +
736 +
737 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Compile and Upload Code to ASR6601 Platform]]
738 +
739 +
740 +
741 += 5.  Order Info =
742 +
743 +
744 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
745 +
746 +
747 +(% style="color:blue" %)**XXX**(%%): The default frequency band
748 +
749 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
750 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
751 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
752 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
753 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
754 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
755 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
756 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
757 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
758 +
759 +
760 +
761 +
762 += 6.  Reference =
763 +
764 +
765 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0