Skip to Content
Last modified by Xiaoling on 2023/05/26 14:19
From version 77.1
edited by Edwin Chen
on 2022/07/03 00:25
Change comment: There is no comment for this version
To version 159.1
edited by Bei Jinggeng
on 2022/09/07 17:13
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 LoRaWAN Shield User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Bei
Content
... ... @@ -1,28 +1,64 @@
1 -{{box cssClass="floatinginfobox" title="**Contents**"}}
1 +
2 +
3 +**Table of Contents:**
4 +
2 2  {{toc/}}
3 -{{/box}}
4 4  
5 -= LA66 LoRaWAN Module =
6 6  
7 -== What is LA66 LoRaWAN Module ==
8 8  
9 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
10 10  
11 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
10 += 1.  LA66 LoRaWAN Shield =
12 12  
12 +
13 +== 1.1  Overview ==
14 +
15 +
16 +(((
17 +[[image:image-20220715000826-2.png||height="145" width="220"]]
18 +)))
19 +
20 +(((
21 +
22 +)))
23 +
24 +(((
25 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 +)))
27 +
28 +(((
29 +(((
30 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 +)))
32 +)))
33 +
34 +(((
35 +(((
13 13  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 +)))
38 +)))
14 14  
40 +(((
41 +(((
15 15  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 +)))
44 +)))
16 16  
46 +(((
47 +(((
17 17  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
49 +)))
50 +)))
18 18  
19 19  
20 -== Features ==
21 21  
22 -* Support LoRaWAN v1.0.4 protocol
54 +== 1.2  Features ==
55 +
56 +
57 +* Arduino Shield base on LA66 LoRaWAN module
58 +* Support LoRaWAN v1.0.3 protocol
23 23  * Support peer-to-peer protocol
24 24  * TCXO crystal to ensure RF performance on low temperature
25 -* SMD Antenna pad and i-pex antenna connector
61 +* SMA connector
26 26  * Available in different frequency LoRaWAN frequency bands.
27 27  * World-wide unique OTAA keys.
28 28  * AT Command via UART-TTL interface
... ... @@ -29,8 +29,9 @@
29 29  * Firmware upgradable via UART interface
30 30  * Ultra-long RF range
31 31  
32 -== Specification ==
68 +== 1.3  Specification ==
33 33  
70 +
34 34  * CPU: 32-bit 48 MHz
35 35  * Flash: 256KB
36 36  * RAM: 64KB
... ... @@ -49,343 +49,301 @@
49 49  * LoRa Rx current: <9 mA
50 50  * I/O Voltage: 3.3v
51 51  
52 -== AT Command ==
89 +== 1.4  Pin Mapping & LED ==
53 53  
54 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
55 55  
92 +[[image:image-20220817085048-1.png||height="533" width="734"]]
56 56  
57 -== Dimension ==
58 58  
59 -[[image:image-20220517072526-1.png]]
60 60  
96 +~1. The LED lights up red when there is an upstream data packet
97 +2. When the network is successfully connected, the green light will be on for 5 seconds
98 +3. Purple light on when receiving downlink data packets
61 61  
62 -== Pin Mapping ==
63 63  
64 -[[image:image-20220523101537-1.png]]
101 +[[image:image-20220820112305-1.png||height="515" width="749"]]
65 65  
66 -== Land Pattern ==
67 67  
68 -[[image:image-20220517072821-2.png]]
69 69  
105 +== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
70 70  
71 -== Order Info ==
72 72  
73 -Part Number: **LA66-XXX**
108 +**Show connection diagram：**
74 74  
75 -**XX**: The default frequency band
76 76  
77 -* **AS923**: LoRaWAN AS923 band
78 -* **AU915**: LoRaWAN AU915 band
79 -* **EU433**: LoRaWAN EU433 band
80 -* **EU868**: LoRaWAN EU868 band
81 -* **KR920**: LoRaWAN KR920 band
82 -* **US915**: LoRaWAN US915 band
83 -* **IN865**: LoRaWAN IN865 band
84 -* **CN470**: LoRaWAN CN470 band
85 -* **PP**: Peer to Peer LoRa Protocol
111 +[[image:image-20220723170210-2.png||height="908" width="681"]]
86 86  
87 -= LA66 LoRaWAN Shield =
88 88  
89 -== Overview ==
90 90  
91 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
115 +(% style="color:blue" %)**1.  open Arduino IDE**
92 92  
93 93  
94 -== Features ==
118 +[[image:image-20220723170545-4.png]]
95 95  
96 -* Arduino Shield base on LA66 LoRaWAN module
97 -* Support LoRaWAN v1.0.4 protocol
98 -* Support peer-to-peer protocol
99 -* TCXO crystal to ensure RF performance on low temperature
100 -* SMA connector
101 -* Available in different frequency LoRaWAN frequency bands.
102 -* World-wide unique OTAA keys.
103 -* AT Command via UART-TTL interface
104 -* Firmware upgradable via UART interface
105 -* Ultra-long RF range
106 106  
107 -== Specification ==
108 108  
109 -* CPU: 32-bit 48 MHz
110 -* Flash: 256KB
111 -* RAM: 64KB
112 -* Input Power Range: 1.8v ~~ 3.7v
113 -* Power Consumption: < 4uA.
114 -* Frequency Range: 150 MHz ~~ 960 MHz
115 -* Maximum Power +22 dBm constant RF output
116 -* High sensitivity: -148 dBm
117 -* Temperature:
118 -** Storage: -55 ~~ +125℃
119 -** Operating: -40 ~~ +85℃
120 -* Humidity:
121 -** Storage: 5 ~~ 95% (Non-Condensing)
122 -** Operating: 10 ~~ 95% (Non-Condensing)
123 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
124 -* LoRa Rx current: <9 mA
125 -* I/O Voltage: 3.3v
122 +(% style="color:blue" %)**2.  Open project**
126 126  
127 -== Pin Mapping & LED ==
128 128  
129 -== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
125 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
130 130  
131 -== Example: Join TTN network and send an uplink message, get downlink message. ==
132 132  
133 -== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
128 +[[image:image-20220726135239-1.png]]
134 134  
135 -== Upgrade Firmware of LA66 LoRaWAN Shield ==
136 136  
137 -=== Items needed for update ===
138 138  
139 -1. LA66 LoRaWAN Shield
140 -1. Arduino
141 -1. USB TO TTL Adapter
132 +(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
142 142  
143 -[[image:image-20220602100052-2.png||height="385" width="600"]]
144 144  
135 +[[image:image-20220726135356-2.png]]
145 145  
146 -=== Connection ===
147 147  
148 -[[image:image-20220602101311-3.png||height="276" width="600"]]
149 149  
150 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
151 -**GND  <-> GND
152 -TXD  <-> TXD
153 -RXD  <-> RXD**
139 +(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
154 154  
155 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
156 156  
157 -Connect USB TTL Adapter to PC after connecting the wires
142 +[[image:image-20220723172235-7.png||height="480" width="1027"]]
158 158  
159 159  
160 -[[image:image-20220602102240-4.png||height="304" width="600"]]
161 161  
146 +== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
162 162  
163 -=== Upgrade steps ===
164 164  
165 -==== Switch SW1 to put in ISP position ====
149 +(% style="color:blue" %)**1.  Open project**
166 166  
167 -[[image:image-20220602102824-5.png||height="306" width="600"]]
168 168  
152 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
169 169  
170 -==== Press the RST switch once ====
171 171  
172 -[[image:image-20220602104701-12.png||height="285" width="600"]]
155 +[[image:image-20220723172502-8.png]]
173 173  
174 174  
175 -==== Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
176 176  
177 -**~1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
159 +(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
178 178  
179 -[[image:image-20220602103227-6.png]]
180 180  
181 -[[image:image-20220602103357-7.png]]
162 +[[image:image-20220723172938-9.png||height="652" width="1050"]]
182 182  
183 183  
184 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
185 -**2. Select the COM port corresponding to USB TTL**
186 186  
187 -[[image:image-20220602103844-8.png]]
166 +== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
188 188  
189 189  
190 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
191 -**3. Select the bin file to burn**
169 +(% style="color:blue" %)**1.  Open project**
192 192  
193 -[[image:image-20220602104144-9.png]]
194 194  
195 -[[image:image-20220602104251-10.png]]
172 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
196 196  
197 -[[image:image-20220602104402-11.png]]
198 198  
175 +[[image:image-20220723173341-10.png||height="581" width="1014"]]
199 199  
200 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
201 -**4. Click to start the download**
202 202  
203 -[[image:image-20220602104923-13.png]]
204 204  
179 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
205 205  
206 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
207 -**5. Check update process**
208 208  
209 -[[image:image-20220602104948-14.png]]
182 +[[image:image-20220723173950-11.png||height="665" width="1012"]]
210 210  
211 211  
212 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
213 -**The following picture shows that the burning is successful**
185 +LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
214 214  
215 -[[image:image-20220602105251-15.png]]
216 216  
217 217  
218 -== Order Info ==
189 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
219 219  
220 -Part Number: **LA66-LoRaWAN-Shield-XXX**
221 221  
222 -**XX**: The default frequency band
192 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
223 223  
224 -* **AS923**: LoRaWAN AS923 band
225 -* **AU915**: LoRaWAN AU915 band
226 -* **EU433**: LoRaWAN EU433 band
227 -* **EU868**: LoRaWAN EU868 band
228 -* **KR920**: LoRaWAN KR920 band
229 -* **US915**: LoRaWAN US915 band
230 -* **IN865**: LoRaWAN IN865 band
231 -* **CN470**: LoRaWAN CN470 band
232 -* **PP**: Peer to Peer LoRa Protocol
233 233  
234 -== Package Info ==
195 +[[image:image-20220723175700-12.png||height="602" width="995"]]
235 235  
236 -* LA66 LoRaWAN Shield x 1
237 -* RF Antenna x 1
197 +== 1.8 Example: How to join helium ==
238 238  
239 -= LA66 USB LoRaWAN Adapter =
240 240  
241 -== Overview ==
200 +(% style="color:blue" %)**1. Create a new device.**
242 242  
243 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
202 +[[image:image-20220907165500-1.png||height="464" width="940"]]
244 244  
245 245  
246 -== Features ==
205 +(% style="color:blue" %)**2. Save the device after filling in the necessary information.**
247 247  
248 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
249 -* Ultra-long RF range
250 -* Support LoRaWAN v1.0.4 protocol
251 -* Support peer-to-peer protocol
252 -* TCXO crystal to ensure RF performance on low temperature
253 -* Spring RF antenna
254 -* Available in different frequency LoRaWAN frequency bands.
255 -* World-wide unique OTAA keys.
256 -* AT Command via UART-TTL interface
257 -* Firmware upgradable via UART interface
207 +[[image:image-20220907165837-2.png||height="375" width="809"]]
258 258  
259 -== Specification ==
260 260  
261 -* CPU: 32-bit 48 MHz
262 -* Flash: 256KB
263 -* RAM: 64KB
264 -* Input Power Range: 5v
265 -* Frequency Range: 150 MHz ~~ 960 MHz
266 -* Maximum Power +22 dBm constant RF output
267 -* High sensitivity: -148 dBm
268 -* Temperature:
269 -** Storage: -55 ~~ +125℃
270 -** Operating: -40 ~~ +85℃
271 -* Humidity:
272 -** Storage: 5 ~~ 95% (Non-Condensing)
273 -** Operating: 10 ~~ 95% (Non-Condensing)
274 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
275 -* LoRa Rx current: <9 mA
210 +(% style="color:blue" %)**3.  Use AT commands.**
276 276  
277 -== Pin Mapping & LED ==
212 +[[image:image-20220602100052-2.png||height="385" width="600"]]
278 278  
279 -== Example Send & Get Messages via LoRaWAN in PC ==
280 280  
281 -Connect the LA66 LoRa Shield to the PC
215 +(% style="color:#0000ff" %)**4.Use command AT+CFG to get device configuration**
282 282  
283 -[[image:image-20220602171217-1.png||height="615" width="915"]]
217 +[[image:image-20220907170308-3.png||height="556" width="617"]]
284 284  
285 -Open the serial port tool
286 286  
287 -[[image:image-20220602161617-8.png]]
220 +(% style="color:blue" %)**5.  Network successfully.**
288 288  
289 -[[image:image-20220602161718-9.png||height="529" width="927"]]
222 +[[image:image-20220907170436-4.png]]
290 290  
291 -Press the reset switch RST on the LA66 LoRa Shield.
292 292  
293 -The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
225 +(% style="color:blue" %)**6.  Send uplink using command**
294 294  
295 -[[image:image-20220602161935-10.png]]
227 +[[image:image-20220907170659-5.png]]
296 296  
297 -send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
229 +[[image:image-20220907170744-6.png||height="242" width="798"]]
298 298  
299 -example: AT+SENDB=01,02,8,05820802581ea0a5
300 300  
301 -[[image:image-20220602162157-11.png]]
232 +== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
302 302  
303 -Check to see if TTN received the message
304 304  
305 -[[image:image-20220602162331-12.png||height="547" width="1044"]]
235 +=== 1.9.1  Items needed for update ===
306 306  
307 -== Example Send & Get Messages via LoRaWAN in RPi ==
308 308  
309 -Connect the LA66 LoRa Shield to the RPI
238 +1. LA66 LoRaWAN Shield
239 +1. Arduino
240 +1. USB TO TTL Adapter
310 310  
311 -[[image:image-20220602171233-2.png||height="592" width="881"]]
242 +[[image:image-20220602100052-2.png||height="385" width="600"]]
312 312  
313 -Log in to the RPI's terminal and connect to the serial port
314 314  
315 -[[image:image-20220602153146-3.png]]
316 316  
317 -Press the reset switch RST on the LA66 LoRa Shield.
318 -The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
246 +=== 1.9.2  Connection ===
319 319  
320 -[[image:image-20220602154928-5.png]]
321 321  
322 -send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
249 +[[image:image-20220602101311-3.png||height="276" width="600"]]
323 323  
324 -example: AT+SENDB=01,02,8,05820802581ea0a5
325 325  
326 -[[image:image-20220602160339-6.png]]
252 +(((
253 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
254 +)))
327 327  
328 -Check to see if TTN received the message
256 +(((
257 +(% style="background-color:yellow" %)**GND  <-> GND
258 +TXD  <->  TXD
259 +RXD  <->  RXD**
260 +)))
329 329  
330 -[[image:image-20220602160627-7.png||height="468" width="1013"]]
331 331  
332 -=== Install Minicom ===
263 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
333 333  
334 -Enter the following command in the RPI terminal
265 +Connect USB TTL Adapter to PC after connecting the wires
335 335  
336 -apt update
337 337  
338 -[[image:image-20220602143155-1.png]]
268 +[[image:image-20220602102240-4.png||height="304" width="600"]]
339 339  
340 -apt install minicom
341 341  
342 -[[image:image-20220602143744-2.png]]
343 343  
344 -=== Send PC's CPU/RAM usage to TTN via script. ===
272 +=== 1.9.3  Upgrade steps ===
345 345  
346 -==== Take python as an example： ====
347 347  
348 -===== Preconditions: =====
349 349  
350 -1.LA66 USB LoRaWAN Adapter works fine
276 +==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
351 351  
352 -2.LA66 USB LoRaWAN Adapter  is registered with TTN
353 353  
354 -===== Steps for usage =====
279 +[[image:image-20220602102824-5.png||height="306" width="600"]]
355 355  
356 -1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
357 357  
358 -2.Run the script and see the TTN
359 359  
360 -[[image:image-20220602115852-3.png]]
283 +==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
361 361  
362 362  
286 +[[image:image-20220817085447-1.png]]
363 363  
364 -== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
365 365  
366 366  
367 -== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
368 368  
291 +==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
369 369  
370 370  
371 -== Order Info ==
294 +(((
295 +(% style="color:blue" %)**1. Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
296 +)))
372 372  
373 -Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
374 374  
375 -**XX**: The default frequency band
299 +[[image:image-20220602103227-6.png]]
376 376  
377 -* **AS923**: LoRaWAN AS923 band
378 -* **AU915**: LoRaWAN AU915 band
379 -* **EU433**: LoRaWAN EU433 band
380 -* **EU868**: LoRaWAN EU868 band
381 -* **KR920**: LoRaWAN KR920 band
382 -* **US915**: LoRaWAN US915 band
383 -* **IN865**: LoRaWAN IN865 band
384 -* **CN470**: LoRaWAN CN470 band
385 -* **PP**: Peer to Peer LoRa Protocol
386 386  
387 -== Package Info ==
302 +[[image:image-20220602103357-7.png]]
388 388  
389 -* LA66 USB LoRaWAN Adapter x 1
390 390  
305 +
306 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
307 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
308 +
309 +
310 +[[image:image-20220602103844-8.png]]
311 +
312 +
313 +
314 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
315 +(% style="color:blue" %)**3. Select the bin file to burn**
316 +
317 +
318 +[[image:image-20220602104144-9.png]]
319 +
320 +
321 +[[image:image-20220602104251-10.png]]
322 +
323 +
324 +[[image:image-20220602104402-11.png]]
325 +
326 +
327 +
328 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
329 +(% style="color:blue" %)**4. Click to start the download**
330 +
331 +
332 +[[image:image-20220602104923-13.png]]
333 +
334 +
335 +
336 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
337 +(% style="color:blue" %)**5. Check update process**
338 +
339 +
340 +[[image:image-20220602104948-14.png]]
341 +
342 +
343 +
344 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
345 +(% style="color:blue" %)**The following picture shows that the burning is successful**
346 +
347 +
348 +[[image:image-20220602105251-15.png]]
349 +
350 +
351 +
352 += 2.  FAQ =
353 +
354 +
355 +== 2.1  How to Compile Source Code for LA66? ==
356 +
357 +
358 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
359 +
360 +
361 +
362 += 3.  Order Info =
363 +
364 +
365 +**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
366 +
367 +
368 +(% style="color:blue" %)**XXX**(%%): The default frequency band
369 +
370 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
371 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
372 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
373 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
374 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
375 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
376 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
377 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
378 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
379 +
380 +
381 += 4.  Reference =
382 +
383 +
384 +* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
385 +
391 391  
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +44.5 KB
Content