Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 75.1 >
edited by Edwin Chen
on 2022/07/03 00:21
To version < 145.1 >
edited by Edwin Chen
on 2022/08/14 10:15
>
Change comment: Uploaded new attachment "image-20220814101457-1.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -1,24 +1,58 @@
1 -{{box cssClass="floatinginfobox" title="**Contents**"}}
1 +
2 +
3 +**Table of Contents:**
4 +
2 2  {{toc/}}
3 -{{/box}}
4 4  
5 -= LA66 LoRaWAN Module =
6 6  
7 -== What is LA66 LoRaWAN Module ==
8 8  
9 += 1.  LA66 LoRaWAN Module =
10 +
11 +
12 +== 1.1  What is LA66 LoRaWAN Module ==
13 +
14 +
15 +(((
16 +(((
17 +[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 +)))
19 +
20 +(((
21 +
22 +)))
23 +
24 +(((
9 9  (% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 +)))
27 +)))
10 10  
11 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
29 +(((
30 +(((
31 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 +)))
33 +)))
12 12  
35 +(((
36 +(((
13 13  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 +)))
14 14  
40 +(((
15 15  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 +)))
43 +)))
16 16  
45 +(((
46 +(((
17 17  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 +)))
49 +)))
18 18  
19 19  
20 -== Features ==
21 21  
53 +== 1.2  Features ==
54 +
55 +
22 22  * Support LoRaWAN v1.0.4 protocol
23 23  * Support peer-to-peer protocol
24 24  * TCXO crystal to ensure RF performance on low temperature
... ... @@ -29,8 +29,9 @@
29 29  * Firmware upgradable via UART interface
30 30  * Ultra-long RF range
31 31  
32 -== Specification ==
66 +== 1.3  Specification ==
33 33  
68 +
34 34  * CPU: 32-bit 48 MHz
35 35  * Flash: 256KB
36 36  * RAM: 64KB
... ... @@ -49,50 +49,79 @@
49 49  * LoRa Rx current: <9 mA
50 50  * I/O Voltage: 3.3v
51 51  
52 -== AT Command ==
87 +== 1.4  AT Command ==
53 53  
89 +
54 54  AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
55 55  
56 56  
57 -== Dimension ==
58 58  
59 -[[image:image-20220517072526-1.png]]
94 +== 1.5  Dimension ==
60 60  
96 +[[image:image-20220718094750-3.png]]
61 61  
62 -== Pin Mapping ==
63 63  
64 -[[image:image-20220523101537-1.png]]
65 65  
66 -== Land Pattern ==
100 +== 1.6  Pin Mapping ==
67 67  
102 +[[image:image-20220720111850-1.png]]
103 +
104 +
105 +
106 +== 1.7  Land Pattern ==
107 +
108 +
68 68  [[image:image-20220517072821-2.png]]
69 69  
70 70  
71 -== Order Info ==
72 72  
73 -Part Number: **LA66-XXX**
113 += 2.  LA66 LoRaWAN Shield =
74 74  
75 -**XX**: The default frequency band
76 76  
77 -* **AS923**: LoRaWAN AS923 band
78 -* **AU915**: LoRaWAN AU915 band
79 -* **EU433**: LoRaWAN EU433 band
80 -* **EU868**: LoRaWAN EU868 band
81 -* **KR920**: LoRaWAN KR920 band
82 -* **US915**: LoRaWAN US915 band
83 -* **IN865**: LoRaWAN IN865 band
84 -* **CN470**: LoRaWAN CN470 band
85 -* **PP**: Peer to Peer LoRa Protocol
116 +== 2.1  Overview ==
86 86  
87 -= LA66 LoRaWAN Shield =
88 88  
89 -== Overview ==
119 +(((
120 +[[image:image-20220715000826-2.png||height="145" width="220"]]
121 +)))
90 90  
91 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
123 +(((
124 +
125 +)))
92 92  
127 +(((
128 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
129 +)))
93 93  
94 -== Features ==
131 +(((
132 +(((
133 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
134 +)))
135 +)))
95 95  
137 +(((
138 +(((
139 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
140 +)))
141 +)))
142 +
143 +(((
144 +(((
145 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
146 +)))
147 +)))
148 +
149 +(((
150 +(((
151 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
152 +)))
153 +)))
154 +
155 +
156 +
157 +== 2.2  Features ==
158 +
159 +
96 96  * Arduino Shield base on LA66 LoRaWAN module
97 97  * Support LoRaWAN v1.0.4 protocol
98 98  * Support peer-to-peer protocol
... ... @@ -104,8 +104,9 @@
104 104  * Firmware upgradable via UART interface
105 105  * Ultra-long RF range
106 106  
107 -== Specification ==
171 +== 2.3  Specification ==
108 108  
173 +
109 109  * CPU: 32-bit 48 MHz
110 110  * Flash: 256KB
111 111  * RAM: 64KB
... ... @@ -124,18 +124,106 @@
124 124  * LoRa Rx current: <9 mA
125 125  * I/O Voltage: 3.3v
126 126  
127 -== Pin Mapping & LED ==
192 +== 2.4  Pin Mapping & LED ==
128 128  
129 -== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
130 130  
131 -== Example: Join TTN network and send an uplink message, get downlink message. ==
195 +~1. The LED lights up red when there is an upstream data packet
196 +2. When the network is successfully connected, the green light will be on for 5 seconds
197 +3. Purple light on when receiving downlink data packets
132 132  
133 -== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
134 134  
135 -== Upgrade Firmware of LA66 LoRaWAN Shield ==
136 136  
137 -=== Items needed for update ===
201 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
138 138  
203 +
204 +**Show connection diagram：**
205 +
206 +
207 +[[image:image-20220723170210-2.png||height="908" width="681"]]
208 +
209 +
210 +
211 +(% style="color:blue" %)**1.  open Arduino IDE**
212 +
213 +
214 +[[image:image-20220723170545-4.png]]
215 +
216 +
217 +
218 +(% style="color:blue" %)**2.  Open project**
219 +
220 +
221 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
222 +
223 +[[image:image-20220726135239-1.png]]
224 +
225 +
226 +(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
227 +
228 +[[image:image-20220726135356-2.png]]
229 +
230 +
231 +(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
232 +
233 +
234 +[[image:image-20220723172235-7.png||height="480" width="1027"]]
235 +
236 +
237 +
238 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
239 +
240 +
241 +(% style="color:blue" %)**1.  Open project**
242 +
243 +
244 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
245 +
246 +
247 +[[image:image-20220723172502-8.png]]
248 +
249 +
250 +
251 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
252 +
253 +
254 +[[image:image-20220723172938-9.png||height="652" width="1050"]]
255 +
256 +
257 +
258 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
259 +
260 +
261 +(% style="color:blue" %)**1.  Open project**
262 +
263 +
264 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
265 +
266 +
267 +[[image:image-20220723173341-10.png||height="581" width="1014"]]
268 +
269 +
270 +
271 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
272 +
273 +
274 +[[image:image-20220723173950-11.png||height="665" width="1012"]]
275 +
276 +
277 +
278 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
279 +
280 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
281 +
282 +[[image:image-20220723175700-12.png||height="602" width="995"]]
283 +
284 +
285 +
286 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
287 +
288 +
289 +=== 2.8.1  Items needed for update ===
290 +
291 +
139 139  1. LA66 LoRaWAN Shield
140 140  1. Arduino
141 141  1. USB TO TTL Adapter
... ... @@ -143,17 +143,26 @@
143 143  [[image:image-20220602100052-2.png||height="385" width="600"]]
144 144  
145 145  
146 -=== Connection ===
147 147  
300 +=== 2.8.2  Connection ===
301 +
302 +
148 148  [[image:image-20220602101311-3.png||height="276" width="600"]]
149 149  
150 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
151 -**GND  <-> GND
152 -TXD  <-> TXD
153 -RXD  <-> RXD**
154 154  
155 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield.
306 +(((
307 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
308 +)))
156 156  
310 +(((
311 +(% style="background-color:yellow" %)**GND  <-> GND
312 +TXD  <->  TXD
313 +RXD  <->  RXD**
314 +)))
315 +
316 +
317 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
318 +
157 157  Connect USB TTL Adapter to PC after connecting the wires
158 158  
159 159  
... ... @@ -160,82 +160,117 @@
160 160  [[image:image-20220602102240-4.png||height="304" width="600"]]
161 161  
162 162  
163 -=== Upgrade steps ===
164 164  
165 -==== Switch SW1 to put in ISP position ====
326 +=== 2.8.3  Upgrade steps ===
166 166  
328 +
329 +==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
330 +
331 +
167 167  [[image:image-20220602102824-5.png||height="306" width="600"]]
168 168  
169 169  
170 -==== Press the RST switch once ====
171 171  
336 +==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
337 +
338 +
172 172  [[image:image-20220602104701-12.png||height="285" width="600"]]
173 173  
174 174  
175 -==== Open the Upgrade tool (Tremo Programmer) in PC ====
176 176  
177 -Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
343 +==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
178 178  
345 +
346 +(((
347 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
348 +)))
349 +
350 +
179 179  [[image:image-20220602103227-6.png]]
180 180  
353 +
181 181  [[image:image-20220602103357-7.png]]
182 182  
183 -===== Select the COM port corresponding to USB TTL =====
184 184  
357 +
358 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
359 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
360 +
361 +
185 185  [[image:image-20220602103844-8.png]]
186 186  
187 -===== Select the bin file to burn =====
188 188  
365 +
366 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
367 +(% style="color:blue" %)**3. Select the bin file to burn**
368 +
369 +
189 189  [[image:image-20220602104144-9.png]]
190 190  
372 +
191 191  [[image:image-20220602104251-10.png]]
192 192  
375 +
193 193  [[image:image-20220602104402-11.png]]
194 194  
195 -===== Click to start the download =====
196 196  
379 +
380 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
381 +(% style="color:blue" %)**4. Click to start the download**
382 +
197 197  [[image:image-20220602104923-13.png]]
198 198  
199 -===== The following figure appears to prove that the burning is in progress =====
200 200  
386 +
387 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
388 +(% style="color:blue" %)**5. Check update process**
389 +
390 +
201 201  [[image:image-20220602104948-14.png]]
202 202  
203 -===== The following picture appears to prove that the burning is successful =====
204 204  
394 +
395 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
396 +(% style="color:blue" %)**The following picture shows that the burning is successful**
397 +
205 205  [[image:image-20220602105251-15.png]]
206 206  
207 207  
208 -== Order Info ==
209 209  
210 -Part Number: **LA66-LoRaWAN-Shield-XXX**
402 += 3.  LA66 USB LoRaWAN Adapter =
211 211  
212 -**XX**: The default frequency band
213 213  
214 -* **AS923**: LoRaWAN AS923 band
215 -* **AU915**: LoRaWAN AU915 band
216 -* **EU433**: LoRaWAN EU433 band
217 -* **EU868**: LoRaWAN EU868 band
218 -* **KR920**: LoRaWAN KR920 band
219 -* **US915**: LoRaWAN US915 band
220 -* **IN865**: LoRaWAN IN865 band
221 -* **CN470**: LoRaWAN CN470 band
222 -* **PP**: Peer to Peer LoRa Protocol
405 +== 3.1  Overview ==
223 223  
224 -== Package Info ==
225 225  
226 -* LA66 LoRaWAN Shield x 1
227 -* RF Antenna x 1
408 +[[image:image-20220715001142-3.png||height="145" width="220"]]
228 228  
229 229  
230 -= LA66 USB LoRaWAN Adapter =
411 +(((
412 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
413 +)))
231 231  
232 -== Overview ==
415 +(((
416 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
417 +)))
233 233  
234 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
419 +(((
420 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
421 +)))
235 235  
423 +(((
424 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
425 +)))
236 236  
237 -== Features ==
427 +(((
428 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
429 +)))
238 238  
431 +
432 +
433 +== 3.2  Features ==
434 +
435 +
239 239  * LoRaWAN USB adapter base on LA66 LoRaWAN module
240 240  * Ultra-long RF range
241 241  * Support LoRaWAN v1.0.4 protocol
... ... @@ -246,9 +246,11 @@
246 246  * World-wide unique OTAA keys.
247 247  * AT Command via UART-TTL interface
248 248  * Firmware upgradable via UART interface
446 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
249 249  
250 -== Specification ==
448 +== 3.3  Specification ==
251 251  
450 +
252 252  * CPU: 32-bit 48 MHz
253 253  * Flash: 256KB
254 254  * RAM: 64KB
... ... @@ -265,118 +265,282 @@
265 265  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
266 266  * LoRa Rx current: <9 mA
267 267  
268 -== Pin Mapping & LED ==
467 +== 3.4  Pin Mapping & LED ==
269 269  
270 -== Example Send & Get Messages via LoRaWAN in PC ==
469 +[[image:image-20220813183239-3.png||height="526" width="662"]]
271 271  
272 -Connect the LA66 LoRa Shield to the PC
273 273  
274 -[[image:image-20220602171217-1.png||height="615" width="915"]]
472 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
275 275  
474 +
475 +(((
476 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
477 +)))
478 +
479 +
480 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
481 +
482 +
483 +[[image:image-20220723100027-1.png]]
484 +
485 +
276 276  Open the serial port tool
277 277  
278 278  [[image:image-20220602161617-8.png]]
279 279  
280 -[[image:image-20220602161718-9.png||height="529" width="927"]]
490 +[[image:image-20220602161718-9.png||height="457" width="800"]]
281 281  
282 -Press the reset switch RST on the LA66 LoRa Shield.
283 283  
284 -The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
285 285  
286 -[[image:image-20220602161935-10.png]]
494 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
287 287  
288 -send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
496 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
289 289  
498 +
499 +[[image:image-20220602161935-10.png||height="498" width="800"]]
500 +
501 +
502 +
503 +(% style="color:blue" %)**3. See Uplink Command**
504 +
505 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
506 +
290 290  example: AT+SENDB=01,02,8,05820802581ea0a5
291 291  
292 -[[image:image-20220602162157-11.png]]
509 +[[image:image-20220602162157-11.png||height="497" width="800"]]
293 293  
294 -Check to see if TTN received the message
295 295  
296 -[[image:image-20220602162331-12.png||height="547" width="1044"]]
297 297  
298 -== Example Send & Get Messages via LoRaWAN in RPi ==
513 +(% style="color:blue" %)**4. Check to see if TTN received the message**
299 299  
300 -Connect the LA66 LoRa Shield to the RPI
515 +[[image:image-20220602162331-12.png||height="420" width="800"]]
301 301  
302 -[[image:image-20220602171233-2.png||height="592" width="881"]]
303 303  
304 -Log in to the RPI's terminal and connect to the serial port
305 305  
306 -[[image:image-20220602153146-3.png]]
519 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
307 307  
308 -Press the reset switch RST on the LA66 LoRa Shield.
309 -The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
310 310  
311 -[[image:image-20220602154928-5.png]]
522 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
312 312  
313 -send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
524 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
314 314  
526 +(% style="color:red" %)**Preconditions:**
527 +
528 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
529 +
530 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
531 +
532 +
533 +
534 +(% style="color:blue" %)**Steps for usage:**
535 +
536 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
537 +
538 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
539 +
540 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
541 +
542 +
543 +
544 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
545 +
546 +
547 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
548 +
549 +
550 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
551 +
552 +[[image:image-20220723100439-2.png]]
553 +
554 +
555 +
556 +(% style="color:blue" %)**2. Install Minicom in RPi.**
557 +
558 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
559 +
560 + (% style="background-color:yellow" %)**apt update**
561 +
562 + (% style="background-color:yellow" %)**apt install minicom**
563 +
564 +
565 +Use minicom to connect to the RPI's terminal
566 +
567 +[[image:image-20220602153146-3.png||height="439" width="500"]]
568 +
569 +
570 +
571 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
572 +
573 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
574 +
575 +
576 +[[image:image-20220602154928-5.png||height="436" width="500"]]
577 +
578 +
579 +
580 +(% style="color:blue" %)**4. Send Uplink message**
581 +
582 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
583 +
315 315  example: AT+SENDB=01,02,8,05820802581ea0a5
316 316  
317 -[[image:image-20220602160339-6.png]]
318 318  
587 +[[image:image-20220602160339-6.png||height="517" width="600"]]
588 +
589 +
590 +
319 319  Check to see if TTN received the message
320 320  
321 -[[image:image-20220602160627-7.png||height="468" width="1013"]]
593 +[[image:image-20220602160627-7.png||height="369" width="800"]]
322 322  
323 -=== Install Minicom ===
324 324  
325 -Enter the following command in the RPI terminal
326 326  
327 -apt update
597 +== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
328 328  
329 -[[image:image-20220602143155-1.png]]
330 330  
331 -apt install minicom
600 +=== 3.8.1  Hardware and Software Connection ===
332 332  
333 -[[image:image-20220602143744-2.png]]
334 334  
335 -=== Send PC's CPU/RAM usage to TTN via script. ===
603 +==== (% style="color:blue" %)**Overview：**(%%) ====
336 336  
337 -==== Take python as an example： ====
338 338  
339 -===== Preconditions: =====
606 +(((
607 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
340 340  
341 -1.LA66 USB LoRaWAN Adapter works fine
609 +* Send real-time location information of mobile phone to LoRaWAN network.
610 +* Check LoRaWAN network signal strengh.
611 +* Manually send messages to LoRaWAN network.
612 +)))
342 342  
343 -2.LA66 USB LoRaWAN Adapter  is registered with TTN
344 344  
345 -===== Steps for usage =====
346 346  
347 -1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
616 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
348 348  
349 -2.Run the script and see the TTN
618 +A USB to Type-C adapter is needed to connect to a Mobile phone.
350 350  
351 -[[image:image-20220602115852-3.png]]
620 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
352 352  
622 +[[image:image-20220813174353-2.png||height="360" width="313"]]
353 353  
354 354  
355 -== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
625 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
356 356  
627 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
357 357  
358 -== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
629 +[[image:image-20220813173738-1.png]]
359 359  
360 360  
632 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
361 361  
362 -== Order Info ==
634 +Function and page introduction
363 363  
364 -Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
636 +[[image:image-20220723113448-7.png||height="995" width="450"]]
365 365  
366 -**XX**: The default frequency band
638 +**Block Explain:**
367 367  
368 -* **AS923**: LoRaWAN AS923 band
369 -* **AU915**: LoRaWAN AU915 band
370 -* **EU433**: LoRaWAN EU433 band
371 -* **EU868**: LoRaWAN EU868 band
372 -* **KR920**: LoRaWAN KR920 band
373 -* **US915**: LoRaWAN US915 band
374 -* **IN865**: LoRaWAN IN865 band
375 -* **CN470**: LoRaWAN CN470 band
376 -* **PP**: Peer to Peer LoRa Protocol
640 +1.  Display LA66 USB LoRaWAN Module connection status
377 377  
378 -== Package Info ==
642 +2.  Check and reconnect
379 379  
380 -* LA66 USB LoRaWAN Adapter x 1
644 +3.  Turn send timestamps on or off
381 381  
382 -
646 +4.  Display LoRaWan connection status
647 +
648 +5.  Check LoRaWan connection status
649 +
650 +6.  The RSSI value of the node when the ACK is received
651 +
652 +7.  Node's Signal Strength Icon
653 +
654 +8.  Configure Location Uplink Interval
655 +
656 +9.  AT command input box
657 +
658 +10.  Send Button:  Send input box info to LA66 USB Adapter
659 +
660 +11.  Output Log from LA66 USB adapter
661 +
662 +12.  clear log button
663 +
664 +13.  exit button
665 +
666 +
667 +LA66 USB LoRaWAN Module not connected
668 +
669 +[[image:image-20220723110520-5.png||height="677" width="508"]]
670 +
671 +
672 +
673 +Connect LA66 USB LoRaWAN Module
674 +
675 +[[image:image-20220723110626-6.png||height="681" width="511"]]
676 +
677 +
678 +
679 +=== 3.8.2 Send data to TTNv3 and plot location info in Node-Red ===
680 +
681 +
682 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
683 +
684 +[[image:image-20220723134549-8.png]]
685 +
686 +
687 +
688 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
689 +
690 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
691 +
692 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
693 +
694 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
695 +
696 +
697 +Example output in NodeRed is as below:
698 +
699 +[[image:image-20220723144339-1.png]]
700 +
701 +
702 +
703 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
704 +
705 +
706 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
707 +
708 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
709 +
710 +[[image:image-20220723150132-2.png]]
711 +
712 +
713 +
714 += 4.  FAQ =
715 +
716 +
717 +== 4.1  How to Compile Source Code for LA66? ==
718 +
719 +
720 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Compile and Upload Code to ASR6601 Platform]]
721 +
722 +
723 +
724 += 5.  Order Info =
725 +
726 +
727 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
728 +
729 +
730 +(% style="color:blue" %)**XXX**(%%): The default frequency band
731 +
732 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
733 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
734 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
735 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
736 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
737 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
738 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
739 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
740 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
741 +
742 += 6.  Reference =
743 +
744 +
745 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0