Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 73.1 >
edited by Edwin Chen
on 2022/07/03 00:12
To version < 146.7 >
edited by Xiaoling
on 2022/08/16 14:19
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 LoRaWAN Shield User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -1,28 +1,64 @@
1 -{{box cssClass="floatinginfobox" title="**Contents**"}}
1 +
2 +
3 +**Table of Contents:**
4 +
2 2  {{toc/}}
3 -{{/box}}
4 4  
5 -= LA66 LoRaWAN Module =
6 6  
7 -== What is LA66 LoRaWAN Module ==
8 8  
9 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
10 10  
11 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
10 += 1.  LA66 LoRaWAN Shield =
12 12  
12 +
13 +== 1.1  Overview ==
14 +
15 +
16 +(((
17 +[[image:image-20220715000826-2.png||height="145" width="220"]]
18 +)))
19 +
20 +(((
21 +
22 +)))
23 +
24 +(((
25 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 +)))
27 +
28 +(((
29 +(((
30 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 +)))
32 +)))
33 +
34 +(((
35 +(((
13 13  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 +)))
38 +)))
14 14  
40 +(((
41 +(((
15 15  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 +)))
44 +)))
16 16  
46 +(((
47 +(((
17 17  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
49 +)))
50 +)))
18 18  
19 19  
20 -== Features ==
21 21  
54 +== 1.2  Features ==
55 +
56 +
57 +* Arduino Shield base on LA66 LoRaWAN module
22 22  * Support LoRaWAN v1.0.4 protocol
23 23  * Support peer-to-peer protocol
24 24  * TCXO crystal to ensure RF performance on low temperature
25 -* SMD Antenna pad and i-pex antenna connector
61 +* SMA connector
26 26  * Available in different frequency LoRaWAN frequency bands.
27 27  * World-wide unique OTAA keys.
28 28  * AT Command via UART-TTL interface
... ... @@ -29,8 +29,12 @@
29 29  * Firmware upgradable via UART interface
30 30  * Ultra-long RF range
31 31  
32 -== Specification ==
33 33  
69 +
70 +
71 +== 1.3  Specification ==
72 +
73 +
34 34  * CPU: 32-bit 48 MHz
35 35  * Flash: 256KB
36 36  * RAM: 64KB
... ... @@ -49,340 +49,253 @@
49 49  * LoRa Rx current: <9 mA
50 50  * I/O Voltage: 3.3v
51 51  
52 -== AT Command ==
53 53  
54 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
55 55  
56 56  
57 -== Dimension ==
95 +== 1.4  Pin Mapping & LED ==
58 58  
59 -[[image:image-20220517072526-1.png]]
60 60  
98 +[[image:image-20220814101457-1.png||height="553" width="761"]]
61 61  
62 -== Pin Mapping ==
100 +~1. The LED lights up red when there is an upstream data packet
101 +2. When the network is successfully connected, the green light will be on for 5 seconds
102 +3. Purple light on when receiving downlink data packets
63 63  
64 -[[image:image-20220523101537-1.png]]
65 65  
66 -== Land Pattern ==
67 67  
68 -[[image:image-20220517072821-2.png]]
106 +== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
69 69  
70 70  
71 -== Order Info ==
109 +**Show connection diagram：**
72 72  
73 -Part Number: **LA66-XXX**
74 74  
75 -**XX**: The default frequency band
112 +[[image:image-20220723170210-2.png||height="908" width="681"]]
76 76  
77 -* **AS923**: LoRaWAN AS923 band
78 -* **AU915**: LoRaWAN AU915 band
79 -* **EU433**: LoRaWAN EU433 band
80 -* **EU868**: LoRaWAN EU868 band
81 -* **KR920**: LoRaWAN KR920 band
82 -* **US915**: LoRaWAN US915 band
83 -* **IN865**: LoRaWAN IN865 band
84 -* **CN470**: LoRaWAN CN470 band
85 -* **PP**: Peer to Peer LoRa Protocol
86 86  
87 -= LA66 LoRaWAN Shield =
88 88  
89 -== Overview ==
116 +(% style="color:blue" %)**1.  open Arduino IDE**
90 90  
91 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
92 92  
119 +[[image:image-20220723170545-4.png]]
93 93  
94 -== Features ==
95 95  
96 -* Arduino Shield base on LA66 LoRaWAN module
97 -* Support LoRaWAN v1.0.4 protocol
98 -* Support peer-to-peer protocol
99 -* TCXO crystal to ensure RF performance on low temperature
100 -* SMA connector
101 -* Available in different frequency LoRaWAN frequency bands.
102 -* World-wide unique OTAA keys.
103 -* AT Command via UART-TTL interface
104 -* Firmware upgradable via UART interface
105 -* Ultra-long RF range
106 106  
107 -== Specification ==
123 +(% style="color:blue" %)**2.  Open project**
108 108  
109 -* CPU: 32-bit 48 MHz
110 -* Flash: 256KB
111 -* RAM: 64KB
112 -* Input Power Range: 1.8v ~~ 3.7v
113 -* Power Consumption: < 4uA.
114 -* Frequency Range: 150 MHz ~~ 960 MHz
115 -* Maximum Power +22 dBm constant RF output
116 -* High sensitivity: -148 dBm
117 -* Temperature:
118 -** Storage: -55 ~~ +125℃
119 -** Operating: -40 ~~ +85℃
120 -* Humidity:
121 -** Storage: 5 ~~ 95% (Non-Condensing)
122 -** Operating: 10 ~~ 95% (Non-Condensing)
123 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
124 -* LoRa Rx current: <9 mA
125 -* I/O Voltage: 3.3v
126 126  
127 -== Pin Mapping & LED ==
126 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
128 128  
129 -== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
128 +[[image:image-20220726135239-1.png]]
130 130  
131 -== Example: Join TTN network and send an uplink message, get downlink message. ==
132 132  
133 -== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
131 +(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
134 134  
135 -== Upgrade Firmware of LA66 LoRaWAN Shield ==
133 +[[image:image-20220726135356-2.png]]
136 136  
137 -=== what needs to be used ===
138 138  
139 -1.LA66 LoRaWAN Shield that needs to be upgraded
136 +(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
140 140  
141 -2.Arduino
142 142  
143 -3.USB TO TTL
139 +[[image:image-20220723172235-7.png||height="480" width="1027"]]
144 144  
145 -[[image:image-20220602100052-2.png]]
146 146  
147 -=== Wiring Schematic ===
148 148  
149 -[[image:image-20220602101311-3.png]]
143 +== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
150 150  
151 -LA66 LoRaWAN Shield  >>>>>>>>>>>>USB TTL
152 152  
153 -GND  >>>>>>>>>>>>GND
146 +(% style="color:blue" %)**1.  Open project**
154 154  
155 -TXD  >>>>>>>>>>>>TXD
156 156  
157 -RXD  >>>>>>>>>>>>RXD
149 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
158 158  
159 -JP6 of LA66 LoRaWAN Shield needs to be connected with yellow jumper cap
160 160  
161 -Connect to the PC after connecting the wires
152 +[[image:image-20220723172502-8.png]]
162 162  
163 -[[image:image-20220602102240-4.png]]
164 164  
165 -=== Upgrade steps ===
166 166  
167 -==== Dial the SW1 of the LA66 LoRaWAN Shield to the ISP's location as shown in the figure below ====
156 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
168 168  
169 -[[image:image-20220602102824-5.png]]
170 170  
171 -==== Press the RST switch on the LA66 LoRaWAN Shield once ====
159 +[[image:image-20220723172938-9.png||height="652" width="1050"]]
172 172  
173 -[[image:image-20220602104701-12.png]]
174 174  
175 -==== Open the upgrade application software ====
176 176  
177 -Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
163 +== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
178 178  
179 -[[image:image-20220602103227-6.png]]
180 180  
181 -[[image:image-20220602103357-7.png]]
166 +(% style="color:blue" %)**1.  Open project**
182 182  
183 -===== Select the COM port corresponding to USB TTL =====
184 184  
185 -[[image:image-20220602103844-8.png]]
169 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
186 186  
187 -===== Select the bin file to burn =====
188 188  
189 -[[image:image-20220602104144-9.png]]
172 +[[image:image-20220723173341-10.png||height="581" width="1014"]]
190 190  
191 -[[image:image-20220602104251-10.png]]
192 192  
193 -[[image:image-20220602104402-11.png]]
194 194  
195 -===== Click to start the download =====
176 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
196 196  
197 -[[image:image-20220602104923-13.png]]
198 198  
199 -===== The following figure appears to prove that the burning is in progress =====
179 +[[image:image-20220723173950-11.png||height="665" width="1012"]]
200 200  
201 -[[image:image-20220602104948-14.png]]
202 202  
203 -===== The following picture appears to prove that the burning is successful =====
204 204  
205 -[[image:image-20220602105251-15.png]]
183 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
206 206  
185 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
207 207  
208 -== Order Info ==
187 +[[image:image-20220723175700-12.png||height="602" width="995"]]
209 209  
210 -Part Number: **LA66-LoRaWAN-Shield-XXX**
211 211  
212 -**XX**: The default frequency band
213 213  
214 -* **AS923**: LoRaWAN AS923 band
215 -* **AU915**: LoRaWAN AU915 band
216 -* **EU433**: LoRaWAN EU433 band
217 -* **EU868**: LoRaWAN EU868 band
218 -* **KR920**: LoRaWAN KR920 band
219 -* **US915**: LoRaWAN US915 band
220 -* **IN865**: LoRaWAN IN865 band
221 -* **CN470**: LoRaWAN CN470 band
222 -* **PP**: Peer to Peer LoRa Protocol
191 +== 1.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
223 223  
224 -== Package Info ==
225 225  
226 -* LA66 LoRaWAN Shield x 1
227 -* RF Antenna x 1
194 +=== 1.8.1  Items needed for update ===
228 228  
229 229  
197 +1. LA66 LoRaWAN Shield
198 +1. Arduino
199 +1. USB TO TTL Adapter
230 230  
201 +[[image:image-20220602100052-2.png||height="385" width="600"]]
231 231  
232 -= LA66 USB LoRaWAN Adapter =
233 233  
234 -== Overview ==
235 235  
236 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
205 +=== 1.8.2  Connection ===
237 237  
238 238  
239 -== Features ==
208 +[[image:image-20220602101311-3.png||height="276" width="600"]]
240 240  
241 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
242 -* Ultra-long RF range
243 -* Support LoRaWAN v1.0.4 protocol
244 -* Support peer-to-peer protocol
245 -* TCXO crystal to ensure RF performance on low temperature
246 -* Spring RF antenna
247 -* Available in different frequency LoRaWAN frequency bands.
248 -* World-wide unique OTAA keys.
249 -* AT Command via UART-TTL interface
250 -* Firmware upgradable via UART interface
251 251  
211 +(((
212 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
213 +)))
252 252  
215 +(((
216 +(% style="background-color:yellow" %)**GND  <-> GND
217 +TXD  <->  TXD
218 +RXD  <->  RXD**
219 +)))
253 253  
254 -== Specification ==
255 255  
256 -* CPU: 32-bit 48 MHz
257 -* Flash: 256KB
258 -* RAM: 64KB
259 -* Input Power Range: 5v
260 -* Frequency Range: 150 MHz ~~ 960 MHz
261 -* Maximum Power +22 dBm constant RF output
262 -* High sensitivity: -148 dBm
263 -* Temperature:
264 -** Storage: -55 ~~ +125℃
265 -** Operating: -40 ~~ +85℃
266 -* Humidity:
267 -** Storage: 5 ~~ 95% (Non-Condensing)
268 -** Operating: 10 ~~ 95% (Non-Condensing)
269 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
270 -* LoRa Rx current: <9 mA
222 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
271 271  
224 +Connect USB TTL Adapter to PC after connecting the wires
272 272  
273 273  
274 -== Pin Mapping & LED ==
227 +[[image:image-20220602102240-4.png||height="304" width="600"]]
275 275  
276 -== Example Send & Get Messages via LoRaWAN in PC ==
277 277  
278 -Connect the LA66 LoRa Shield to the PC
279 279  
280 -[[image:image-20220602171217-1.png||height="615" width="915"]]
231 +=== 2.8.3  Upgrade steps ===
281 281  
282 -Open the serial port tool
283 283  
284 -[[image:image-20220602161617-8.png]]
234 +==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
285 285  
286 -[[image:image-20220602161718-9.png||height="529" width="927"]]
287 287  
288 -Press the reset switch RST on the LA66 LoRa Shield.
237 +[[image:image-20220602102824-5.png||height="306" width="600"]]
289 289  
290 -The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
291 291  
292 -[[image:image-20220602161935-10.png]]
293 293  
294 -send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
241 +==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
295 295  
296 -example: AT+SENDB=01,02,8,05820802581ea0a5
297 297  
298 -[[image:image-20220602162157-11.png]]
244 +[[image:image-20220602104701-12.png||height="285" width="600"]]
299 299  
300 -Check to see if TTN received the message
301 301  
302 -[[image:image-20220602162331-12.png||height="547" width="1044"]]
303 303  
304 -== Example Send & Get Messages via LoRaWAN in RPi ==
248 +==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
305 305  
306 -Connect the LA66 LoRa Shield to the RPI
307 307  
308 -[[image:image-20220602171233-2.png||height="592" width="881"]]
251 +(((
252 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
253 +)))
309 309  
310 -Log in to the RPI's terminal and connect to the serial port
311 311  
312 -[[image:image-20220602153146-3.png]]
256 +[[image:image-20220602103227-6.png]]
313 313  
314 -Press the reset switch RST on the LA66 LoRa Shield.
315 -The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
316 316  
317 -[[image:image-20220602154928-5.png]]
259 +[[image:image-20220602103357-7.png]]
318 318  
319 -send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
320 320  
321 -example: AT+SENDB=01,02,8,05820802581ea0a5
322 322  
323 -[[image:image-20220602160339-6.png]]
263 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
264 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
324 324  
325 -Check to see if TTN received the message
326 326  
327 -[[image:image-20220602160627-7.png||height="468" width="1013"]]
267 +[[image:image-20220602103844-8.png]]
328 328  
329 -=== Install Minicom ===
330 330  
331 -Enter the following command in the RPI terminal
332 332  
333 -apt update
271 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
272 +(% style="color:blue" %)**3. Select the bin file to burn**
334 334  
335 -[[image:image-20220602143155-1.png]]
336 336  
337 -apt install minicom
275 +[[image:image-20220602104144-9.png]]
338 338  
339 -[[image:image-20220602143744-2.png]]
340 340  
341 -=== Send PC's CPU/RAM usage to TTN via script. ===
278 +[[image:image-20220602104251-10.png]]
342 342  
343 -==== Take python as an example： ====
344 344  
345 -===== Preconditions: =====
281 +[[image:image-20220602104402-11.png]]
346 346  
347 -1.LA66 USB LoRaWAN Adapter works fine
348 348  
349 -2.LA66 USB LoRaWAN Adapter  is registered with TTN
350 350  
351 -===== Steps for usage =====
285 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
286 +(% style="color:blue" %)**4. Click to start the download**
352 352  
353 -1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
288 +[[image:image-20220602104923-13.png]]
354 354  
355 -2.Run the script and see the TTN
356 356  
357 -[[image:image-20220602115852-3.png]]
358 358  
292 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
293 +(% style="color:blue" %)**5. Check update process**
359 359  
360 360  
361 -== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
296 +[[image:image-20220602104948-14.png]]
362 362  
363 363  
364 -== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
365 365  
300 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
301 +(% style="color:blue" %)**The following picture shows that the burning is successful**
366 366  
303 +[[image:image-20220602105251-15.png]]
367 367  
368 -== Order Info ==
369 369  
370 -Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
371 371  
372 -**XX**: The default frequency band
307 += 2.  FAQ =
373 373  
374 -* **AS923**: LoRaWAN AS923 band
375 -* **AU915**: LoRaWAN AU915 band
376 -* **EU433**: LoRaWAN EU433 band
377 -* **EU868**: LoRaWAN EU868 band
378 -* **KR920**: LoRaWAN KR920 band
379 -* **US915**: LoRaWAN US915 band
380 -* **IN865**: LoRaWAN IN865 band
381 -* **CN470**: LoRaWAN CN470 band
382 -* **PP**: Peer to Peer LoRa Protocol
383 383  
384 -== Package Info ==
310 +== 2.1  How to Compile Source Code for LA66? ==
385 385  
386 -* LA66 USB LoRaWAN Adapter x 1
387 387  
388 -
313 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
314 +
315 +
316 +
317 += 3.  Order Info =
318 +
319 +
320 +**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
321 +
322 +
323 +(% style="color:blue" %)**XXX**(%%): The default frequency band
324 +
325 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
326 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
327 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
328 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
329 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
330 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
331 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
332 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
333 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
334 +
335 +
336 +
337 +
338 += 4.  Reference =
339 +
340 +
341 +* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0