Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 70.1 >
edited by Edwin Chen
on 2022/07/02 23:51
To version < 118.1 >
edited by Herong Lu
on 2022/07/23 15:01
>
Change comment: Uploaded new attachment "image-20220723150132-2.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Lu
Content
... ... @@ -1,24 +1,57 @@
1 -{{box cssClass="floatinginfobox" title="**Contents**"}}
1 +0
2 +
3 +**Table of Contents:**
4 +
2 2  {{toc/}}
3 -{{/box}}
4 4  
5 -= LA66 LoRaWAN Module =
6 6  
7 -== What is LA66 LoRaWAN Module ==
8 8  
9 += 1.  LA66 LoRaWAN Module =
10 +
11 +
12 +== 1.1  What is LA66 LoRaWAN Module ==
13 +
14 +
15 +(((
16 +(((
17 +[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 +)))
19 +
20 +(((
21 +
22 +)))
23 +
24 +(((
9 9  (% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 +)))
27 +)))
10 10  
11 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
29 +(((
30 +(((
31 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 +)))
33 +)))
12 12  
35 +(((
36 +(((
13 13  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 +)))
14 14  
40 +(((
15 15  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 +)))
43 +)))
16 16  
45 +(((
46 +(((
17 17  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 +)))
49 +)))
18 18  
19 19  
20 -== Features ==
21 21  
53 +== 1.2  Features ==
54 +
22 22  * Support LoRaWAN v1.0.4 protocol
23 23  * Support peer-to-peer protocol
24 24  * TCXO crystal to ensure RF performance on low temperature
... ... @@ -29,10 +29,8 @@
29 29  * Firmware upgradable via UART interface
30 30  * Ultra-long RF range
31 31  
65 +== 1.3  Specification ==
32 32  
33 -
34 -== Specification ==
35 -
36 36  * CPU: 32-bit 48 MHz
37 37  * Flash: 256KB
38 38  * RAM: 64KB
... ... @@ -51,221 +51,526 @@
51 51  * LoRa Rx current: <9 mA
52 52  * I/O Voltage: 3.3v
53 53  
54 -== AT Command ==
85 +== 1.4  AT Command ==
55 55  
87 +
56 56  AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
57 57  
58 58  
59 -== Dimension ==
60 60  
61 -[[image:image-20220517072526-1.png]]
92 +== 1.5  Dimension ==
62 62  
94 +[[image:image-20220718094750-3.png]]
63 63  
64 -== Pin Mapping ==
65 65  
66 -[[image:image-20220523101537-1.png]]
67 67  
68 -== Land Pattern ==
98 +== 1.6  Pin Mapping ==
69 69  
100 +[[image:image-20220720111850-1.png]]
101 +
102 +
103 +
104 +== 1.7  Land Pattern ==
105 +
70 70  [[image:image-20220517072821-2.png]]
71 71  
72 72  
73 -== Part Number ==
74 74  
75 -Part Number: **LA66-XXX**
110 += 2.  LA66 LoRaWAN Shield =
76 76  
77 -**XX**: The default frequency band
78 78  
79 -* **AS923**: LoRaWAN AS923 band
80 -* **AU915**: LoRaWAN AU915 band
81 -* **EU433**: LoRaWAN EU433 band
82 -* **EU868**: LoRaWAN EU868 band
83 -* **KR920**: LoRaWAN KR920 band
84 -* **US915**: LoRaWAN US915 band
85 -* **IN865**: LoRaWAN IN865 band
86 -* **CN470**: LoRaWAN CN470 band
87 -* **PP**: Peer to Peer LoRa Protocol
113 +== 2.1  Overview ==
88 88  
89 -= LA66 LoRaWAN Shield =
90 90  
91 -LA66 LoRaWAN Shield is the Arduino Breakout PCB to fast test the features of LA66 module and turn Arduino to support LoRaWAN.
116 +(((
117 +[[image:image-20220715000826-2.png||height="145" width="220"]]
118 +)))
92 92  
93 -== Pin Mapping & LED ==
120 +(((
121 +
122 +)))
94 94  
95 -== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
124 +(((
125 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
126 +)))
96 96  
97 -== Example: Join TTN network and send an uplink message, get downlink message. ==
128 +(((
129 +(((
130 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
131 +)))
132 +)))
98 98  
99 -== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
134 +(((
135 +(((
136 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
137 +)))
138 +)))
100 100  
101 -== Upgrade Firmware of LA66 LoRaWAN Shield ==
140 +(((
141 +(((
142 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
143 +)))
144 +)))
102 102  
103 -=== what needs to be used ===
146 +(((
147 +(((
148 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
149 +)))
150 +)))
104 104  
105 -1.LA66 LoRaWAN Shield that needs to be upgraded
106 106  
107 -2.Arduino
108 108  
109 -3.USB TO TTL
154 +== 2.2  Features ==
110 110  
111 -[[image:image-20220602100052-2.png]]
156 +* Arduino Shield base on LA66 LoRaWAN module
157 +* Support LoRaWAN v1.0.4 protocol
158 +* Support peer-to-peer protocol
159 +* TCXO crystal to ensure RF performance on low temperature
160 +* SMA connector
161 +* Available in different frequency LoRaWAN frequency bands.
162 +* World-wide unique OTAA keys.
163 +* AT Command via UART-TTL interface
164 +* Firmware upgradable via UART interface
165 +* Ultra-long RF range
112 112  
113 -=== Wiring Schematic ===
167 +== 2.3  Specification ==
114 114  
115 -[[image:image-20220602101311-3.png]]
169 +* CPU: 32-bit 48 MHz
170 +* Flash: 256KB
171 +* RAM: 64KB
172 +* Input Power Range: 1.8v ~~ 3.7v
173 +* Power Consumption: < 4uA.
174 +* Frequency Range: 150 MHz ~~ 960 MHz
175 +* Maximum Power +22 dBm constant RF output
176 +* High sensitivity: -148 dBm
177 +* Temperature:
178 +** Storage: -55 ~~ +125℃
179 +** Operating: -40 ~~ +85℃
180 +* Humidity:
181 +** Storage: 5 ~~ 95% (Non-Condensing)
182 +** Operating: 10 ~~ 95% (Non-Condensing)
183 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
184 +* LoRa Rx current: <9 mA
185 +* I/O Voltage: 3.3v
116 116  
117 -LA66 LoRaWAN Shield  >>>>>>>>>>>>USB TTL
187 +== 2.4  Pin Mapping & LED ==
118 118  
119 -GND  >>>>>>>>>>>>GND
120 120  
121 -TXD  >>>>>>>>>>>>TXD
122 122  
123 -RXD  >>>>>>>>>>>>RXD
191 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
124 124  
125 -JP6 of LA66 LoRaWAN Shield needs to be connected with yellow jumper cap
126 126  
127 -Connect to the PC after connecting the wires
128 128  
129 -[[image:image-20220602102240-4.png]]
195 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
130 130  
131 -=== Upgrade steps ===
132 132  
133 -==== Dial the SW1 of the LA66 LoRaWAN Shield to the ISP's location as shown in the figure below ====
134 134  
135 -[[image:image-20220602102824-5.png]]
199 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
136 136  
137 -==== Press the RST switch on the LA66 LoRaWAN Shield once ====
138 138  
139 -[[image:image-20220602104701-12.png]]
140 140  
141 -==== Open the upgrade application software ====
203 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
142 142  
143 -Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
144 144  
206 +=== 2.8.1  Items needed for update ===
207 +
208 +1. LA66 LoRaWAN Shield
209 +1. Arduino
210 +1. USB TO TTL Adapter
211 +
212 +[[image:image-20220602100052-2.png||height="385" width="600"]]
213 +
214 +
215 +=== 2.8.2  Connection ===
216 +
217 +
218 +[[image:image-20220602101311-3.png||height="276" width="600"]]
219 +
220 +
221 +(((
222 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
223 +)))
224 +
225 +(((
226 +(% style="background-color:yellow" %)**GND  <-> GND
227 +TXD  <->  TXD
228 +RXD  <->  RXD**
229 +)))
230 +
231 +
232 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
233 +
234 +Connect USB TTL Adapter to PC after connecting the wires
235 +
236 +
237 +[[image:image-20220602102240-4.png||height="304" width="600"]]
238 +
239 +
240 +=== 2.8.3  Upgrade steps ===
241 +
242 +
243 +==== 1.  Switch SW1 to put in ISP position ====
244 +
245 +
246 +[[image:image-20220602102824-5.png||height="306" width="600"]]
247 +
248 +
249 +
250 +==== 2.  Press the RST switch once ====
251 +
252 +
253 +[[image:image-20220602104701-12.png||height="285" width="600"]]
254 +
255 +
256 +
257 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
258 +
259 +
260 +(((
261 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
262 +)))
263 +
264 +
145 145  [[image:image-20220602103227-6.png]]
146 146  
267 +
147 147  [[image:image-20220602103357-7.png]]
148 148  
149 -===== Select the COM port corresponding to USB TTL =====
150 150  
271 +
272 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
273 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
274 +
275 +
151 151  [[image:image-20220602103844-8.png]]
152 152  
153 -===== Select the bin file to burn =====
154 154  
279 +
280 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
281 +(% style="color:blue" %)**3. Select the bin file to burn**
282 +
283 +
155 155  [[image:image-20220602104144-9.png]]
156 156  
286 +
157 157  [[image:image-20220602104251-10.png]]
158 158  
289 +
159 159  [[image:image-20220602104402-11.png]]
160 160  
161 -===== Click to start the download =====
162 162  
293 +
294 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
295 +(% style="color:blue" %)**4. Click to start the download**
296 +
163 163  [[image:image-20220602104923-13.png]]
164 164  
165 -===== The following figure appears to prove that the burning is in progress =====
166 166  
300 +
301 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
302 +(% style="color:blue" %)**5. Check update process**
303 +
304 +
167 167  [[image:image-20220602104948-14.png]]
168 168  
169 -===== The following picture appears to prove that the burning is successful =====
170 170  
308 +
309 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
310 +(% style="color:blue" %)**The following picture shows that the burning is successful**
311 +
171 171  [[image:image-20220602105251-15.png]]
172 172  
173 -= LA66 USB LoRaWAN Adapter =
174 174  
175 -LA66 USB LoRaWAN Adapter is the USB Adapter for LA66, it combines a USB TTL Chip and LA66 module which can easy to test the LoRaWAN feature by using PC or embedded device which has USB Interface.
176 176  
177 -Before use, please make sure that the computer has installed the CP2102 driver
316 += 3.  LA66 USB LoRaWAN Adapter =
178 178  
179 -== Pin Mapping & LED ==
180 180  
181 -== Example Send & Get Messages via LoRaWAN in PC ==
319 +== 3.1  Overview ==
182 182  
183 -Connect the LA66 LoRa Shield to the PC
184 184  
185 -[[image:image-20220602171217-1.png||height="615" width="915"]]
322 +[[image:image-20220715001142-3.png||height="145" width="220"]]
186 186  
324 +
325 +(((
326 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
327 +)))
328 +
329 +(((
330 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
331 +)))
332 +
333 +(((
334 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
335 +)))
336 +
337 +(((
338 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
339 +)))
340 +
341 +(((
342 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
343 +)))
344 +
345 +
346 +
347 +== 3.2  Features ==
348 +
349 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
350 +* Ultra-long RF range
351 +* Support LoRaWAN v1.0.4 protocol
352 +* Support peer-to-peer protocol
353 +* TCXO crystal to ensure RF performance on low temperature
354 +* Spring RF antenna
355 +* Available in different frequency LoRaWAN frequency bands.
356 +* World-wide unique OTAA keys.
357 +* AT Command via UART-TTL interface
358 +* Firmware upgradable via UART interface
359 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
360 +
361 +== 3.3  Specification ==
362 +
363 +* CPU: 32-bit 48 MHz
364 +* Flash: 256KB
365 +* RAM: 64KB
366 +* Input Power Range: 5v
367 +* Frequency Range: 150 MHz ~~ 960 MHz
368 +* Maximum Power +22 dBm constant RF output
369 +* High sensitivity: -148 dBm
370 +* Temperature:
371 +** Storage: -55 ~~ +125℃
372 +** Operating: -40 ~~ +85℃
373 +* Humidity:
374 +** Storage: 5 ~~ 95% (Non-Condensing)
375 +** Operating: 10 ~~ 95% (Non-Condensing)
376 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
377 +* LoRa Rx current: <9 mA
378 +
379 +== 3.4  Pin Mapping & LED ==
380 +
381 +
382 +
383 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
384 +
385 +
386 +(((
387 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
388 +)))
389 +
390 +
391 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
392 +
393 +
394 +[[image:image-20220723100027-1.png]]
395 +
396 +
187 187  Open the serial port tool
188 188  
189 189  [[image:image-20220602161617-8.png]]
190 190  
191 -[[image:image-20220602161718-9.png||height="529" width="927"]]
401 +[[image:image-20220602161718-9.png||height="457" width="800"]]
192 192  
193 -Press the reset switch RST on the LA66 LoRa Shield.
194 194  
195 -The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
196 196  
197 -[[image:image-20220602161935-10.png]]
405 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
198 198  
199 -send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
407 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
200 200  
409 +
410 +[[image:image-20220602161935-10.png||height="498" width="800"]]
411 +
412 +
413 +
414 +(% style="color:blue" %)**3. See Uplink Command**
415 +
416 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
417 +
201 201  example: AT+SENDB=01,02,8,05820802581ea0a5
202 202  
203 -[[image:image-20220602162157-11.png]]
420 +[[image:image-20220602162157-11.png||height="497" width="800"]]
204 204  
205 -Check to see if TTN received the message
206 206  
207 -[[image:image-20220602162331-12.png||height="547" width="1044"]]
208 208  
209 -== Example Send & Get Messages via LoRaWAN in RPi ==
424 +(% style="color:blue" %)**4. Check to see if TTN received the message**
210 210  
211 -Connect the LA66 LoRa Shield to the RPI
426 +[[image:image-20220602162331-12.png||height="420" width="800"]]
212 212  
213 -[[image:image-20220602171233-2.png||height="592" width="881"]]
214 214  
215 -Log in to the RPI's terminal and connect to the serial port
216 216  
217 -[[image:image-20220602153146-3.png]]
430 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
218 218  
219 -Press the reset switch RST on the LA66 LoRa Shield.
220 -The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
221 221  
222 -[[image:image-20220602154928-5.png]]
433 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
223 223  
224 -send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
435 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
225 225  
437 +(% style="color:red" %)**Preconditions:**
438 +
439 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
440 +
441 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
442 +
443 +
444 +
445 +(% style="color:blue" %)**Steps for usage:**
446 +
447 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
448 +
449 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
450 +
451 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
452 +
453 +
454 +
455 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
456 +
457 +
458 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
459 +
460 +
461 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
462 +
463 +[[image:image-20220723100439-2.png]]
464 +
465 +
466 +
467 +(% style="color:blue" %)**2. Install Minicom in RPi.**
468 +
469 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
470 +
471 + (% style="background-color:yellow" %)**apt update**
472 +
473 + (% style="background-color:yellow" %)**apt install minicom**
474 +
475 +
476 +Use minicom to connect to the RPI's terminal
477 +
478 +[[image:image-20220602153146-3.png||height="439" width="500"]]
479 +
480 +
481 +
482 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
483 +
484 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
485 +
486 +
487 +[[image:image-20220602154928-5.png||height="436" width="500"]]
488 +
489 +
490 +
491 +(% style="color:blue" %)**4. Send Uplink message**
492 +
493 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
494 +
226 226  example: AT+SENDB=01,02,8,05820802581ea0a5
227 227  
228 -[[image:image-20220602160339-6.png]]
229 229  
498 +[[image:image-20220602160339-6.png||height="517" width="600"]]
499 +
500 +
501 +
230 230  Check to see if TTN received the message
231 231  
232 -[[image:image-20220602160627-7.png||height="468" width="1013"]]
504 +[[image:image-20220602160627-7.png||height="369" width="800"]]
233 233  
234 -=== Install Minicom ===
235 235  
236 -Enter the following command in the RPI terminal
237 237  
238 -apt update
508 +== 3.8  Example: Use of LA66 USB LoRaWAN Module and DRAGINO-LA66-APP. ==
239 239  
240 -[[image:image-20220602143155-1.png]]
510 +=== 3.8.1 DRAGINO-LA66-APP ===
241 241  
242 -apt install minicom
512 +[[image:image-20220723102027-3.png]]
243 243  
244 -[[image:image-20220602143744-2.png]]
514 +==== Overview： ====
245 245  
246 -=== Send PC's CPU/RAM usage to TTN via script. ===
516 +DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Module. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Module.
247 247  
248 -==== Take python as an example： ====
518 +View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
249 249  
250 -===== Preconditions: =====
520 +==== Conditions of Use： ====
251 251  
252 -1.LA66 USB LoRaWAN Adapter works fine
522 +Requires a type-c to USB adapter
253 253  
254 -2.LA66 USB LoRaWAN Adapter  is registered with TTN
524 +[[image:image-20220723104754-4.png]]
255 255  
256 -===== Steps for usage =====
526 +==== Use of APP: ====
257 257  
258 -1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
528 +Function and page introduction
259 259  
260 -2.Run the script and see the TTN
530 +[[image:image-20220723113448-7.png||height="1481" width="670"]]
261 261  
262 -[[image:image-20220602115852-3.png]]
532 +1.Display LA66 USB LoRaWAN Module connection status
263 263  
534 +2.Check and reconnect
264 264  
536 +3.Turn send timestamps on or off
265 265  
266 -== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
538 +4.Display LoRaWan connection status
267 267  
540 +5.Check LoRaWan connection status
268 268  
269 -== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
542 +6.The RSSI value of the node when the ACK is received
270 270  
271 -
544 +7.Node's Signal Strength Icon
545 +
546 +8.Set the packet sending interval of the node in seconds
547 +
548 +9.AT command input box
549 +
550 +10.Send AT command button
551 +
552 +11.Node log box
553 +
554 +12.clear log button
555 +
556 +13.exit button
557 +
558 +LA66 USB LoRaWAN Module not connected
559 +
560 +[[image:image-20220723110520-5.png||height="903" width="677"]]
561 +
562 +Connect LA66 USB LoRaWAN Module
563 +
564 +[[image:image-20220723110626-6.png||height="906" width="680"]]
565 +
566 +=== 3.8.2 Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Module and integrate it into Node-RED ===
567 +
568 +1.Register LA66 USB LoRaWAN Module to TTNV3
569 +
570 +[[image:image-20220723134549-8.png]]
571 +
572 +2.Open Node-RED,And import the JSON file to generate the flow
573 +
574 +Sample JSON file please go to this link to download：放置JSON文件的链接
575 +
576 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
577 +
578 +The following is the positioning effect map
579 +
580 +[[image:image-20220723144339-1.png]]
581 +
582 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
583 +
584 +
585 +
586 +
587 += 4.  Order Info =
588 +
589 +
590 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
591 +
592 +
593 +(% style="color:blue" %)**XXX**(%%): The default frequency band
594 +
595 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
596 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
597 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
598 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
599 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
600 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
601 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
602 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
603 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
604 +
605 += 5.  Reference =
606 +
607 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lu
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0