Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 67.1 >
edited by Edwin Chen
on 2022/07/02 23:33
To version < 93.1 >
edited by Edwin Chen
on 2022/07/15 00:12
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,28 +1,57 @@
1 -{{box cssClass="floatinginfobox" title="**Contents**"}}
1 +
2 +
3 +**Table of Contents:**
4 +
2 2  {{toc/}}
3 -{{/box}}
4 4  
5 -= LA66 LoRaWAN Module =
6 6  
7 -== What is LA66 LoRaWAN Module ==
8 8  
9 += 1.  LA66 LoRaWAN Module =
10 +
11 +
12 +== 1.1  What is LA66 LoRaWAN Module ==
13 +
14 +
15 +(((
16 +[[image:image-20220715000242-1.png||height="110" width="132"]]
17 +
9 9  (% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
19 +)))
10 10  
21 +(((
11 11  (% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
23 +)))
12 12  
25 +(((
13 13  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
27 +)))
14 14  
29 +(((
15 15  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
31 +)))
16 16  
33 +(((
17 17  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
35 +)))
18 18  
19 19  
20 -== Features ==
38 +== 1.2  Features ==
21 21  
40 +* Support LoRaWAN v1.0.4 protocol
41 +* Support peer-to-peer protocol
42 +* TCXO crystal to ensure RF performance on low temperature
43 +* SMD Antenna pad and i-pex antenna connector
44 +* Available in different frequency LoRaWAN frequency bands.
45 +* World-wide unique OTAA keys.
46 +* AT Command via UART-TTL interface
47 +* Firmware upgradable via UART interface
48 +* Ultra-long RF range
22 22  
50 +== 1.3  Specification ==
23 23  
24 -== Specification ==
25 -
52 +* CPU: 32-bit 48 MHz
53 +* Flash: 256KB
54 +* RAM: 64KB
26 26  * Input Power Range: 1.8v ~~ 3.7v
27 27  * Power Consumption: < 4uA.
28 28  * Frequency Range: 150 MHz ~~ 960 MHz
... ... @@ -38,220 +38,424 @@
38 38  * LoRa Rx current: <9 mA
39 39  * I/O Voltage: 3.3v
40 40  
41 -== AT Command ==
70 +== 1.4  AT Command ==
42 42  
43 43  AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
44 44  
45 45  
46 -== Dimension ==
75 +== 1.5  Dimension ==
47 47  
48 48  [[image:image-20220517072526-1.png]]
49 49  
50 50  
51 -== Pin Mapping ==
52 52  
81 +== 1.6  Pin Mapping ==
82 +
83 +
53 53  [[image:image-20220523101537-1.png]]
54 54  
55 -== Land Pattern ==
56 56  
87 +
88 +== 1.7  Land Pattern ==
89 +
57 57  [[image:image-20220517072821-2.png]]
58 58  
59 59  
60 -== Part Number ==
61 61  
62 -Part Number: **LA66-XXX**
94 += 2.  LA66 LoRaWAN Shield =
63 63  
64 -**XX**: The default frequency band
65 65  
66 -* **AS923**: LoRaWAN AS923 band
67 -* **AU915**: LoRaWAN AU915 band
68 -* **EU433**: LoRaWAN EU433 band
69 -* **EU868**: LoRaWAN EU868 band
70 -* **KR920**: LoRaWAN KR920 band
71 -* **US915**: LoRaWAN US915 band
72 -* **IN865**: LoRaWAN IN865 band
73 -* **CN470**: LoRaWAN CN470 band
97 +== 2.1  Overview ==
74 74  
75 -= LA66 LoRaWAN Shield =
76 76  
77 -LA66 LoRaWAN Shield is the Arduino Breakout PCB to fast test the features of LA66 module and turn Arduino to support LoRaWAN.
100 +[[image:image-20220715000826-2.png||height="386" width="449"]]
78 78  
79 -== Pin Mapping & LED ==
80 80  
81 -== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
103 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
82 82  
83 -== Example: Join TTN network and send an uplink message, get downlink message. ==
105 +(((
106 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
107 +)))
84 84  
85 -== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
109 +(((
110 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
111 +)))
86 86  
87 -== Upgrade Firmware of LA66 LoRaWAN Shield ==
113 +(((
114 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
115 +)))
88 88  
89 -=== what needs to be used ===
117 +(((
118 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
119 +)))
90 90  
91 -1.LA66 LoRaWAN Shield that needs to be upgraded
92 92  
93 -2.Arduino
122 +== 2.2  Features ==
94 94  
95 -3.USB TO TTL
124 +* Arduino Shield base on LA66 LoRaWAN module
125 +* Support LoRaWAN v1.0.4 protocol
126 +* Support peer-to-peer protocol
127 +* TCXO crystal to ensure RF performance on low temperature
128 +* SMA connector
129 +* Available in different frequency LoRaWAN frequency bands.
130 +* World-wide unique OTAA keys.
131 +* AT Command via UART-TTL interface
132 +* Firmware upgradable via UART interface
133 +* Ultra-long RF range
96 96  
97 -[[image:image-20220602100052-2.png]]
135 +== 2.3  Specification ==
98 98  
99 -=== Wiring Schematic ===
137 +* CPU: 32-bit 48 MHz
138 +* Flash: 256KB
139 +* RAM: 64KB
140 +* Input Power Range: 1.8v ~~ 3.7v
141 +* Power Consumption: < 4uA.
142 +* Frequency Range: 150 MHz ~~ 960 MHz
143 +* Maximum Power +22 dBm constant RF output
144 +* High sensitivity: -148 dBm
145 +* Temperature:
146 +** Storage: -55 ~~ +125℃
147 +** Operating: -40 ~~ +85℃
148 +* Humidity:
149 +** Storage: 5 ~~ 95% (Non-Condensing)
150 +** Operating: 10 ~~ 95% (Non-Condensing)
151 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
152 +* LoRa Rx current: <9 mA
153 +* I/O Voltage: 3.3v
100 100  
101 -[[image:image-20220602101311-3.png]]
155 +== 2.4  Pin Mapping & LED ==
102 102  
103 -LA66 LoRaWAN Shield  >>>>>>>>>>>>USB TTL
104 104  
105 -GND  >>>>>>>>>>>>GND
106 106  
107 -TXD  >>>>>>>>>>>>TXD
159 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
108 108  
109 -RXD  >>>>>>>>>>>>RXD
110 110  
111 -JP6 of LA66 LoRaWAN Shield needs to be connected with yellow jumper cap
112 112  
113 -Connect to the PC after connecting the wires
163 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
114 114  
115 -[[image:image-20220602102240-4.png]]
116 116  
117 -=== Upgrade steps ===
118 118  
119 -==== Dial the SW1 of the LA66 LoRaWAN Shield to the ISP's location as shown in the figure below ====
167 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
120 120  
121 -[[image:image-20220602102824-5.png]]
122 122  
123 -==== Press the RST switch on the LA66 LoRaWAN Shield once ====
124 124  
125 -[[image:image-20220602104701-12.png]]
171 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
126 126  
127 -==== Open the upgrade application software ====
128 128  
129 -Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
174 +=== 2.8.1  Items needed for update ===
130 130  
176 +1. LA66 LoRaWAN Shield
177 +1. Arduino
178 +1. USB TO TTL Adapter
179 +
180 +[[image:image-20220602100052-2.png||height="385" width="600"]]
181 +
182 +
183 +=== 2.8.2  Connection ===
184 +
185 +
186 +[[image:image-20220602101311-3.png||height="276" width="600"]]
187 +
188 +
189 +(((
190 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
191 +)))
192 +
193 +(((
194 +(% style="background-color:yellow" %)**GND  <-> GND
195 +TXD  <->  TXD
196 +RXD  <->  RXD**
197 +)))
198 +
199 +
200 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
201 +
202 +Connect USB TTL Adapter to PC after connecting the wires
203 +
204 +
205 +[[image:image-20220602102240-4.png||height="304" width="600"]]
206 +
207 +
208 +=== 2.8.3  Upgrade steps ===
209 +
210 +
211 +==== 1.  Switch SW1 to put in ISP position ====
212 +
213 +
214 +[[image:image-20220602102824-5.png||height="306" width="600"]]
215 +
216 +
217 +
218 +==== 2.  Press the RST switch once ====
219 +
220 +
221 +[[image:image-20220602104701-12.png||height="285" width="600"]]
222 +
223 +
224 +
225 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
226 +
227 +
228 +(((
229 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
230 +)))
231 +
232 +
131 131  [[image:image-20220602103227-6.png]]
132 132  
235 +
133 133  [[image:image-20220602103357-7.png]]
134 134  
135 -===== Select the COM port corresponding to USB TTL =====
136 136  
239 +
240 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
241 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
242 +
243 +
137 137  [[image:image-20220602103844-8.png]]
138 138  
139 -===== Select the bin file to burn =====
140 140  
247 +
248 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
249 +(% style="color:blue" %)**3. Select the bin file to burn**
250 +
251 +
141 141  [[image:image-20220602104144-9.png]]
142 142  
254 +
143 143  [[image:image-20220602104251-10.png]]
144 144  
257 +
145 145  [[image:image-20220602104402-11.png]]
146 146  
147 -===== Click to start the download =====
148 148  
261 +
262 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
263 +(% style="color:blue" %)**4. Click to start the download**
264 +
149 149  [[image:image-20220602104923-13.png]]
150 150  
151 -===== The following figure appears to prove that the burning is in progress =====
152 152  
268 +
269 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
270 +(% style="color:blue" %)**5. Check update process**
271 +
272 +
153 153  [[image:image-20220602104948-14.png]]
154 154  
155 -===== The following picture appears to prove that the burning is successful =====
156 156  
276 +
277 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
278 +(% style="color:blue" %)**The following picture shows that the burning is successful**
279 +
157 157  [[image:image-20220602105251-15.png]]
158 158  
159 -= LA66 USB LoRaWAN Adapter =
160 160  
161 -LA66 USB LoRaWAN Adapter is the USB Adapter for LA66, it combines a USB TTL Chip and LA66 module which can easy to test the LoRaWAN feature by using PC or embedded device which has USB Interface.
162 162  
163 -Before use, please make sure that the computer has installed the CP2102 driver
284 += 3.  LA66 USB LoRaWAN Adapter =
164 164  
165 -== Pin Mapping & LED ==
166 166  
167 -== Example Send & Get Messages via LoRaWAN in PC ==
287 +== 3.1  Overview ==
168 168  
169 -Connect the LA66 LoRa Shield to the PC
289 +[[image:image-20220715001142-3.png||height="145" width="220"]]
170 170  
171 -[[image:image-20220602171217-1.png||height="615" width="915"]]
291 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
172 172  
293 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
294 +
295 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
296 +
297 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
298 +
299 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
300 +
301 +
302 +== 3.2  Features ==
303 +
304 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
305 +* Ultra-long RF range
306 +* Support LoRaWAN v1.0.4 protocol
307 +* Support peer-to-peer protocol
308 +* TCXO crystal to ensure RF performance on low temperature
309 +* Spring RF antenna
310 +* Available in different frequency LoRaWAN frequency bands.
311 +* World-wide unique OTAA keys.
312 +* AT Command via UART-TTL interface
313 +* Firmware upgradable via UART interface
314 +
315 +== 3.3  Specification ==
316 +
317 +* CPU: 32-bit 48 MHz
318 +* Flash: 256KB
319 +* RAM: 64KB
320 +* Input Power Range: 5v
321 +* Frequency Range: 150 MHz ~~ 960 MHz
322 +* Maximum Power +22 dBm constant RF output
323 +* High sensitivity: -148 dBm
324 +* Temperature:
325 +** Storage: -55 ~~ +125℃
326 +** Operating: -40 ~~ +85℃
327 +* Humidity:
328 +** Storage: 5 ~~ 95% (Non-Condensing)
329 +** Operating: 10 ~~ 95% (Non-Condensing)
330 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
331 +* LoRa Rx current: <9 mA
332 +
333 +== 3.4  Pin Mapping & LED ==
334 +
335 +
336 +
337 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
338 +
339 +
340 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
341 +
342 +
343 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
344 +
345 +
346 +[[image:image-20220602171217-1.png||height="538" width="800"]]
347 +
348 +
173 173  Open the serial port tool
174 174  
175 175  [[image:image-20220602161617-8.png]]
176 176  
177 -[[image:image-20220602161718-9.png||height="529" width="927"]]
353 +[[image:image-20220602161718-9.png||height="457" width="800"]]
178 178  
179 -Press the reset switch RST on the LA66 LoRa Shield.
180 180  
181 -The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
182 182  
183 -[[image:image-20220602161935-10.png]]
357 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
184 184  
185 -send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
359 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
186 186  
361 +
362 +[[image:image-20220602161935-10.png||height="498" width="800"]]
363 +
364 +
365 +
366 +(% style="color:blue" %)**3. See Uplink Command**
367 +
368 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
369 +
187 187  example: AT+SENDB=01,02,8,05820802581ea0a5
188 188  
189 -[[image:image-20220602162157-11.png]]
372 +[[image:image-20220602162157-11.png||height="497" width="800"]]
190 190  
191 -Check to see if TTN received the message
192 192  
193 -[[image:image-20220602162331-12.png||height="547" width="1044"]]
194 194  
195 -== Example Send & Get Messages via LoRaWAN in RPi ==
376 +(% style="color:blue" %)**4. Check to see if TTN received the message**
196 196  
197 -Connect the LA66 LoRa Shield to the RPI
378 +[[image:image-20220602162331-12.png||height="420" width="800"]]
198 198  
199 -[[image:image-20220602171233-2.png||height="592" width="881"]]
200 200  
201 -Log in to the RPI's terminal and connect to the serial port
202 202  
203 -[[image:image-20220602153146-3.png]]
382 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
204 204  
205 -Press the reset switch RST on the LA66 LoRa Shield.
206 -The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
207 207  
208 -[[image:image-20220602154928-5.png]]
385 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
209 209  
210 -send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
211 211  
388 +(% style="color:red" %)**Preconditions:**
389 +
390 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
391 +
392 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
393 +
394 +
395 +
396 +(% style="color:blue" %)**Steps for usage:**
397 +
398 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
399 +
400 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
401 +
402 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
403 +
404 +
405 +
406 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
407 +
408 +
409 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
410 +
411 +
412 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
413 +
414 +[[image:image-20220602171233-2.png||height="538" width="800"]]
415 +
416 +
417 +
418 +(% style="color:blue" %)**2. Install Minicom in RPi.**
419 +
420 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
421 +
422 + (% style="background-color:yellow" %)**apt update**
423 +
424 + (% style="background-color:yellow" %)**apt install minicom**
425 +
426 +
427 +Use minicom to connect to the RPI's terminal
428 +
429 +[[image:image-20220602153146-3.png||height="439" width="500"]]
430 +
431 +
432 +
433 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
434 +
435 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
436 +
437 +
438 +[[image:image-20220602154928-5.png||height="436" width="500"]]
439 +
440 +
441 +
442 +(% style="color:blue" %)**4. Send Uplink message**
443 +
444 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
445 +
212 212  example: AT+SENDB=01,02,8,05820802581ea0a5
213 213  
214 -[[image:image-20220602160339-6.png]]
215 215  
216 -Check to see if TTN received the message
449 +[[image:image-20220602160339-6.png||height="517" width="600"]]
217 217  
218 -[[image:image-20220602160627-7.png||height="468" width="1013"]]
219 219  
220 -=== Install Minicom ===
221 221  
222 -Enter the following command in the RPI terminal
453 +Check to see if TTN received the message
223 223  
224 -apt update
455 +[[image:image-20220602160627-7.png||height="369" width="800"]]
225 225  
226 -[[image:image-20220602143155-1.png]]
227 227  
228 -apt install minicom
229 229  
230 -[[image:image-20220602143744-2.png]]
459 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
231 231  
232 -=== Send PC's CPU/RAM usage to TTN via script. ===
233 233  
234 -==== Take python as an example： ====
235 235  
236 -===== Preconditions: =====
463 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
237 237  
238 -1.LA66 USB LoRaWAN Adapter works fine
239 239  
240 -2.LA66 USB LoRaWAN Adapter  is registered with TTN
241 241  
242 -===== Steps for usage =====
243 243  
244 -1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
468 += 4.  Order Info =
245 245  
246 -2.Run the script and see the TTN
247 247  
248 -[[image:image-20220602115852-3.png]]
471 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
249 249  
250 250  
474 +(% style="color:blue" %)**XXX**(%%): The default frequency band
251 251  
252 -== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
476 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
477 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
478 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
479 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
480 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
481 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
482 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
483 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
484 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
253 253  
486 += 5.  Reference =
254 254  
255 -== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
488 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
256 256  
257 257  
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0