Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 67.1 >
edited by Edwin Chen
on 2022/07/02 23:33
To version < 82.1 >
edited by Edwin Chen
on 2022/07/10 22:05
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -19,10 +19,21 @@
19 19  
20 20  == Features ==
21 21  
22 +* Support LoRaWAN v1.0.4 protocol
23 +* Support peer-to-peer protocol
24 +* TCXO crystal to ensure RF performance on low temperature
25 +* SMD Antenna pad and i-pex antenna connector
26 +* Available in different frequency LoRaWAN frequency bands.
27 +* World-wide unique OTAA keys.
28 +* AT Command via UART-TTL interface
29 +* Firmware upgradable via UART interface
30 +* Ultra-long RF range
22 22  
23 -
24 24  == Specification ==
25 25  
34 +* CPU: 32-bit 48 MHz
35 +* Flash: 256KB
36 +* RAM: 64KB
26 26  * Input Power Range: 1.8v ~~ 3.7v
27 27  * Power Consumption: < 4uA.
28 28  * Frequency Range: 150 MHz ~~ 960 MHz
... ... @@ -57,7 +57,7 @@
57 57  [[image:image-20220517072821-2.png]]
58 58  
59 59  
60 -== Part Number ==
71 +== Order Info ==
61 61  
62 62  Part Number: **LA66-XXX**
63 63  
... ... @@ -71,11 +71,48 @@
71 71  * **US915**: LoRaWAN US915 band
72 72  * **IN865**: LoRaWAN IN865 band
73 73  * **CN470**: LoRaWAN CN470 band
85 +* **PP**: Peer to Peer LoRa Protocol
74 74  
75 75  = LA66 LoRaWAN Shield =
76 76  
77 -LA66 LoRaWAN Shield is the Arduino Breakout PCB to fast test the features of LA66 module and turn Arduino to support LoRaWAN.
89 +== Overview ==
78 78  
91 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
92 +
93 +
94 +== Features ==
95 +
96 +* Arduino Shield base on LA66 LoRaWAN module
97 +* Support LoRaWAN v1.0.4 protocol
98 +* Support peer-to-peer protocol
99 +* TCXO crystal to ensure RF performance on low temperature
100 +* SMA connector
101 +* Available in different frequency LoRaWAN frequency bands.
102 +* World-wide unique OTAA keys.
103 +* AT Command via UART-TTL interface
104 +* Firmware upgradable via UART interface
105 +* Ultra-long RF range
106 +
107 +== Specification ==
108 +
109 +* CPU: 32-bit 48 MHz
110 +* Flash: 256KB
111 +* RAM: 64KB
112 +* Input Power Range: 1.8v ~~ 3.7v
113 +* Power Consumption: < 4uA.
114 +* Frequency Range: 150 MHz ~~ 960 MHz
115 +* Maximum Power +22 dBm constant RF output
116 +* High sensitivity: -148 dBm
117 +* Temperature:
118 +** Storage: -55 ~~ +125℃
119 +** Operating: -40 ~~ +85℃
120 +* Humidity:
121 +** Storage: 5 ~~ 95% (Non-Condensing)
122 +** Operating: 10 ~~ 95% (Non-Condensing)
123 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
124 +* LoRa Rx current: <9 mA
125 +* I/O Voltage: 3.3v
126 +
79 79  == Pin Mapping & LED ==
80 80  
81 81  == Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
... ... @@ -86,58 +86,62 @@
86 86  
87 87  == Upgrade Firmware of LA66 LoRaWAN Shield ==
88 88  
89 -=== what needs to be used ===
137 +=== Items needed for update ===
90 90  
91 -1.LA66 LoRaWAN Shield that needs to be upgraded
139 +1. LA66 LoRaWAN Shield
140 +1. Arduino
141 +1. USB TO TTL Adapter
92 92  
93 -2.Arduino
143 +[[image:image-20220602100052-2.png||height="385" width="600"]]
94 94  
95 -3.USB TO TTL
96 96  
97 -[[image:image-20220602100052-2.png]]
146 +=== Connection ===
98 98  
99 -=== Wiring Schematic ===
148 +[[image:image-20220602101311-3.png||height="276" width="600"]]
100 100  
101 -[[image:image-20220602101311-3.png]]
150 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
151 +**GND  <-> GND
152 +TXD  <-> TXD
153 +RXD  <-> RXD**
102 102  
103 -LA66 LoRaWAN Shield  >>>>>>>>>>>>USB TTL
155 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
104 104  
105 -GND  >>>>>>>>>>>>GND
157 +Connect USB TTL Adapter to PC after connecting the wires
106 106  
107 -TXD  >>>>>>>>>>>>TXD
108 108  
109 -RXD  >>>>>>>>>>>>RXD
160 +[[image:image-20220602102240-4.png||height="304" width="600"]]
110 110  
111 -JP6 of LA66 LoRaWAN Shield needs to be connected with yellow jumper cap
112 112  
113 -Connect to the PC after connecting the wires
163 +=== Upgrade steps ===
114 114  
115 -[[image:image-20220602102240-4.png]]
165 +==== Switch SW1 to put in ISP position ====
116 116  
117 -=== Upgrade steps ===
167 +[[image:image-20220602102824-5.png||height="306" width="600"]]
118 118  
119 -==== Dial the SW1 of the LA66 LoRaWAN Shield to the ISP's location as shown in the figure below ====
120 120  
121 -[[image:image-20220602102824-5.png]]
170 +==== Press the RST switch once ====
122 122  
123 -==== Press the RST switch on the LA66 LoRaWAN Shield once ====
172 +[[image:image-20220602104701-12.png||height="285" width="600"]]
124 124  
125 -[[image:image-20220602104701-12.png]]
126 126  
127 -==== Open the upgrade application software ====
175 +==== Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
128 128  
129 -Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
177 +**~1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
130 130  
131 131  [[image:image-20220602103227-6.png]]
132 132  
133 133  [[image:image-20220602103357-7.png]]
134 134  
135 -===== Select the COM port corresponding to USB TTL =====
136 136  
184 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
185 +**2. Select the COM port corresponding to USB TTL**
186 +
137 137  [[image:image-20220602103844-8.png]]
138 138  
139 -===== Select the bin file to burn =====
140 140  
190 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
191 +**3. Select the bin file to burn**
192 +
141 141  [[image:image-20220602104144-9.png]]
142 142  
143 143  [[image:image-20220602104251-10.png]]
... ... @@ -144,114 +144,218 @@
144 144  
145 145  [[image:image-20220602104402-11.png]]
146 146  
147 -===== Click to start the download =====
148 148  
200 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
201 +**4. Click to start the download**
202 +
149 149  [[image:image-20220602104923-13.png]]
150 150  
151 -===== The following figure appears to prove that the burning is in progress =====
152 152  
206 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
207 +**5. Check update process**
208 +
153 153  [[image:image-20220602104948-14.png]]
154 154  
155 -===== The following picture appears to prove that the burning is successful =====
156 156  
212 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
213 +**The following picture shows that the burning is successful**
214 +
157 157  [[image:image-20220602105251-15.png]]
158 158  
217 +
218 +== Order Info ==
219 +
220 +Part Number: **LA66-LoRaWAN-Shield-XXX**
221 +
222 +**XX**: The default frequency band
223 +
224 +* **AS923**: LoRaWAN AS923 band
225 +* **AU915**: LoRaWAN AU915 band
226 +* **EU433**: LoRaWAN EU433 band
227 +* **EU868**: LoRaWAN EU868 band
228 +* **KR920**: LoRaWAN KR920 band
229 +* **US915**: LoRaWAN US915 band
230 +* **IN865**: LoRaWAN IN865 band
231 +* **CN470**: LoRaWAN CN470 band
232 +* **PP**: Peer to Peer LoRa Protocol
233 +
234 +== Package Info ==
235 +
236 +* LA66 LoRaWAN Shield x 1
237 +* RF Antenna x 1
238 +
159 159  = LA66 USB LoRaWAN Adapter =
160 160  
161 -LA66 USB LoRaWAN Adapter is the USB Adapter for LA66, it combines a USB TTL Chip and LA66 module which can easy to test the LoRaWAN feature by using PC or embedded device which has USB Interface.
241 +== Overview ==
162 162  
163 -Before use, please make sure that the computer has installed the CP2102 driver
243 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
164 164  
245 +
246 +== Features ==
247 +
248 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
249 +* Ultra-long RF range
250 +* Support LoRaWAN v1.0.4 protocol
251 +* Support peer-to-peer protocol
252 +* TCXO crystal to ensure RF performance on low temperature
253 +* Spring RF antenna
254 +* Available in different frequency LoRaWAN frequency bands.
255 +* World-wide unique OTAA keys.
256 +* AT Command via UART-TTL interface
257 +* Firmware upgradable via UART interface
258 +
259 +== Specification ==
260 +
261 +* CPU: 32-bit 48 MHz
262 +* Flash: 256KB
263 +* RAM: 64KB
264 +* Input Power Range: 5v
265 +* Frequency Range: 150 MHz ~~ 960 MHz
266 +* Maximum Power +22 dBm constant RF output
267 +* High sensitivity: -148 dBm
268 +* Temperature:
269 +** Storage: -55 ~~ +125℃
270 +** Operating: -40 ~~ +85℃
271 +* Humidity:
272 +** Storage: 5 ~~ 95% (Non-Condensing)
273 +** Operating: 10 ~~ 95% (Non-Condensing)
274 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
275 +* LoRa Rx current: <9 mA
276 +
165 165  == Pin Mapping & LED ==
166 166  
167 167  == Example Send & Get Messages via LoRaWAN in PC ==
168 168  
169 -Connect the LA66 LoRa Shield to the PC
281 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
170 170  
171 -[[image:image-20220602171217-1.png||height="615" width="915"]]
283 +~1. Connect the LA66 USB LoRaWAN adapter to PC
172 172  
285 +[[image:image-20220602171217-1.png||height="538" width="800"]]
286 +
173 173  Open the serial port tool
174 174  
175 175  [[image:image-20220602161617-8.png]]
176 176  
177 -[[image:image-20220602161718-9.png||height="529" width="927"]]
291 +[[image:image-20220602161718-9.png||height="457" width="800"]]
178 178  
179 -Press the reset switch RST on the LA66 LoRa Shield.
180 180  
181 -The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
294 +2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.
182 182  
183 -[[image:image-20220602161935-10.png]]
296 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
184 184  
185 -send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
298 +[[image:image-20220602161935-10.png||height="498" width="800"]]
186 186  
300 +
301 +3. See Uplink Command
302 +
303 +Command format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
304 +
187 187  example: AT+SENDB=01,02,8,05820802581ea0a5
188 188  
189 -[[image:image-20220602162157-11.png]]
307 +[[image:image-20220602162157-11.png||height="497" width="800"]]
190 190  
191 -Check to see if TTN received the message
192 192  
193 -[[image:image-20220602162331-12.png||height="547" width="1044"]]
310 +4. Check to see if TTN received the message
194 194  
195 -== Example Send & Get Messages via LoRaWAN in RPi ==
312 +[[image:image-20220602162331-12.png||height="420" width="800"]]
196 196  
197 -Connect the LA66 LoRa Shield to the RPI
198 198  
199 -[[image:image-20220602171233-2.png||height="592" width="881"]]
200 200  
201 -Log in to the RPI's terminal and connect to the serial port
316 += (% id="cke_bm_637361S" style="display:none" %) (%%)Example: Send PC's CPU/RAM usage to TTN via python =
202 202  
203 -[[image:image-20220602153146-3.png]]
318 +(% class="wikigeneratedid" id="HUsepythonasanexampleFF1A" %)
319 +**Use python as an example：**
204 204  
205 -Press the reset switch RST on the LA66 LoRa Shield.
206 -The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
321 +(% class="wikigeneratedid" id="HPreconditions:" %)
322 +**Preconditions:**
207 207  
208 -[[image:image-20220602154928-5.png]]
324 +1.LA66 USB LoRaWAN Adapter works fine
209 209  
210 -send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
326 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
211 211  
212 -example: AT+SENDB=01,02,8,05820802581ea0a5
328 +(% class="wikigeneratedid" id="HStepsforusage" %)
329 +**Steps for usage**
213 213  
214 -[[image:image-20220602160339-6.png]]
331 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
215 215  
216 -Check to see if TTN received the message
333 +2.Run the python script in PC and see the TTN
217 217  
218 -[[image:image-20220602160627-7.png||height="468" width="1013"]]
335 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
219 219  
220 -=== Install Minicom ===
221 221  
222 -Enter the following command in the RPI terminal
223 223  
224 -apt update
339 +== Example Send & Get Messages via LoRaWAN in RPi ==
225 225  
226 -[[image:image-20220602143155-1.png]]
341 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
227 227  
228 -apt install minicom
343 +~1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi
229 229  
230 -[[image:image-20220602143744-2.png]]
345 +[[image:image-20220602171233-2.png||height="538" width="800"]]
231 231  
232 -=== Send PC's CPU/RAM usage to TTN via script. ===
233 233  
234 -==== Take python as an example： ====
348 +2. Install Minicom in RPi.
235 235  
236 -===== Preconditions: =====
350 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
237 237  
238 -1.LA66 USB LoRaWAN Adapter works fine
352 +(% class="mark" %)apt update
239 239  
240 -2.LA66 USB LoRaWAN Adapter  is registered with TTN
354 +(% class="mark" %)apt install minicom
241 241  
242 -===== Steps for usage =====
243 243  
244 -1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
357 +Use minicom to connect to the RPI's terminal
245 245  
246 -2.Run the script and see the TTN
359 +[[image:image-20220602153146-3.png||height="439" width="500"]]
247 247  
248 -[[image:image-20220602115852-3.png]]
249 249  
362 +3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.
363 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
250 250  
365 +[[image:image-20220602154928-5.png||height="436" width="500"]]
251 251  
367 +
368 +4. Send Uplink message
369 +
370 +Format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
371 +
372 +example: AT+SENDB=01,02,8,05820802581ea0a5
373 +
374 +[[image:image-20220602160339-6.png||height="517" width="600"]]
375 +
376 +Check to see if TTN received the message
377 +
378 +[[image:image-20220602160627-7.png||height="369" width="800"]]
379 +
380 +
381 +
252 252  == Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
253 253  
254 254  
255 255  == Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
256 256  
387 +
388 +
389 +== Order Info ==
390 +
391 +Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
392 +
393 +**XX**: The default frequency band
394 +
395 +* **AS923**: LoRaWAN AS923 band
396 +* **AU915**: LoRaWAN AU915 band
397 +* **EU433**: LoRaWAN EU433 band
398 +* **EU868**: LoRaWAN EU868 band
399 +* **KR920**: LoRaWAN KR920 band
400 +* **US915**: LoRaWAN US915 band
401 +* **IN865**: LoRaWAN IN865 band
402 +* **CN470**: LoRaWAN CN470 band
403 +* **PP**: Peer to Peer LoRa Protocol
404 +
405 +== Package Info ==
406 +
407 +* LA66 USB LoRaWAN Adapter x 1
408 +
409 += Reference =
410 +
411 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
412 +
257 257  

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0