Summary

• Page properties (2 modified, 0 added, 0 removed)
• Attachments (0 modified, 23 added, 0 removed)
  • image-20220715000242-1.png
  • image-20220715000826-2.png
  • image-20220715001142-3.png
  • image-20220718094030-1.png
  • image-20220718094138-2.png
  • image-20220718094750-3.png
  • image-20220718094950-4.png
  • image-20220718095457-5.png
  • image-20220719093156-1.png
  • image-20220719093358-2.png
  • image-20220720111850-1.png
  • image-20220723100027-1.png
  • image-20220723100439-2.png
  • image-20220723102027-3.png
  • image-20220723104754-4.png
  • image-20220723110520-5.png
  • image-20220723110626-6.png
  • image-20220723113448-7.png
  • image-20220723134549-8.png
  • image-20220723144339-1.png
  • image-20220723150132-2.png
  • image-20220723165950-1.jpeg
  • image-20220723170210-2.png

Details

Page properties

Author

...	...	@@ -1,1 +1,1 @@
1		-XWiki.Edwin
	1	+XWiki.Lu

Content

...	...	@@ -1,28 +1,72 @@
1		-{{box cssClass="floatinginfobox" title="**Contents**"}}
	1	+0
	2	+
	3	+**Table of Contents:**
	4	+
2	2	{{toc/}}
3		-{{/box}}
4	4
5		-= LA66 LoRaWAN Module =
6	6
7		-== What is LA66 LoRaWAN Module ==
8	8
	9	+= 1.  LA66 LoRaWAN Module =
	10	+
	11	+
	12	+== 1.1  What is LA66 LoRaWAN Module ==
	13	+
	14	+
	15	+(((
	16	+(((
	17	+[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
	18	+)))
	19	+
	20	+(((
	21	+
	22	+)))
	23	+
	24	+(((
9	9	(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
	26	+)))
	27	+)))
10	10
11		-(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
	29	+(((
	30	+(((
	31	+(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
	32	+)))
	33	+)))
12	12
	35	+(((
	36	+(((
13	13	Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
	38	+)))
14	14
	40	+(((
15	15	Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
	42	+)))
	43	+)))
16	16
	45	+(((
	46	+(((
17	17	LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
	48	+)))
	49	+)))
18	18
19	19
20		-== Features ==
21	21
	53	+== 1.2  Features ==
22	22
	55	+* Support LoRaWAN v1.0.4 protocol
	56	+* Support peer-to-peer protocol
	57	+* TCXO crystal to ensure RF performance on low temperature
	58	+* SMD Antenna pad and i-pex antenna connector
	59	+* Available in different frequency LoRaWAN frequency bands.
	60	+* World-wide unique OTAA keys.
	61	+* AT Command via UART-TTL interface
	62	+* Firmware upgradable via UART interface
	63	+* Ultra-long RF range
23	23
24		-== Specification ==
	65	+== 1.3  Specification ==
25	25
	67	+* CPU: 32-bit 48 MHz
	68	+* Flash: 256KB
	69	+* RAM: 64KB
26	26	* Input Power Range: 1.8v ~~ 3.7v
27	27	* Power Consumption: < 4uA.
28	28	* Frequency Range: 150 MHz ~~ 960 MHz
...	...	@@ -38,220 +38,530 @@
38	38	* LoRa Rx current: <9 mA
39	39	* I/O Voltage: 3.3v
40	40
41		-== AT Command ==
	85	+== 1.4  AT Command ==
42	42
	87	+
43	43	AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
44	44
45	45
46		-== Dimension ==
47	47
48		-[[image:image-20220517072526-1.png]]
	92	+== 1.5  Dimension ==
49	49
	94	+[[image:image-20220718094750-3.png]]
50	50
51		-== Pin Mapping ==
52	52
53		-[[image:image-20220523101537-1.png]]
54	54
55		-== Land Pattern ==
	98	+== 1.6  Pin Mapping ==
56	56
	100	+[[image:image-20220720111850-1.png]]
	101	+
	102	+
	103	+
	104	+== 1.7  Land Pattern ==
	105	+
57	57	[[image:image-20220517072821-2.png]]
58	58
59	59
60		-== Part Number ==
61	61
62		-Part Number: **LA66-XXX**
	110	+= 2.  LA66 LoRaWAN Shield =
63	63
64		-**XX**: The default frequency band
65	65
66		-* **AS923**: LoRaWAN AS923 band
67		-* **AU915**: LoRaWAN AU915 band
68		-* **EU433**: LoRaWAN EU433 band
69		-* **EU868**: LoRaWAN EU868 band
70		-* **KR920**: LoRaWAN KR920 band
71		-* **US915**: LoRaWAN US915 band
72		-* **IN865**: LoRaWAN IN865 band
73		-* **CN470**: LoRaWAN CN470 band
	113	+== 2.1  Overview ==
74	74
75		-= LA66 LoRaWAN Shield =
76	76
77		-LA66 LoRaWAN Shield is the Arduino Breakout PCB to fast test the features of LA66 module and turn Arduino to support LoRaWAN.
	116	+(((
	117	+[[image:image-20220715000826-2.png||height="145" width="220"]]
	118	+)))
78	78
79		-== Pin Mapping & LED ==
	120	+(((
	121	+
	122	+)))
80	80
81		-== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
	124	+(((
	125	+(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
	126	+)))
82	82
83		-== Example: Join TTN network and send an uplink message, get downlink message. ==
	128	+(((
	129	+(((
	130	+(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
	131	+)))
	132	+)))
84	84
85		-== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
	134	+(((
	135	+(((
	136	+Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
	137	+)))
	138	+)))
86	86
87		-== Upgrade Firmware of LA66 LoRaWAN Shield ==
	140	+(((
	141	+(((
	142	+Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
	143	+)))
	144	+)))
88	88
89		-=== what needs to be used ===
	146	+(((
	147	+(((
	148	+LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
	149	+)))
	150	+)))
90	90
91		-1.LA66 LoRaWAN Shield that needs to be upgraded
92	92
93		-2.Arduino
94	94
95		-3.USB TO TTL
	154	+== 2.2  Features ==
96	96
97		-[[image:image-20220602100052-2.png]]
	156	+* Arduino Shield base on LA66 LoRaWAN module
	157	+* Support LoRaWAN v1.0.4 protocol
	158	+* Support peer-to-peer protocol
	159	+* TCXO crystal to ensure RF performance on low temperature
	160	+* SMA connector
	161	+* Available in different frequency LoRaWAN frequency bands.
	162	+* World-wide unique OTAA keys.
	163	+* AT Command via UART-TTL interface
	164	+* Firmware upgradable via UART interface
	165	+* Ultra-long RF range
98	98
99		-=== Wiring Schematic ===
	167	+== 2.3  Specification ==
100	100
101		-[[image:image-20220602101311-3.png]]
	169	+* CPU: 32-bit 48 MHz
	170	+* Flash: 256KB
	171	+* RAM: 64KB
	172	+* Input Power Range: 1.8v ~~ 3.7v
	173	+* Power Consumption: < 4uA.
	174	+* Frequency Range: 150 MHz ~~ 960 MHz
	175	+* Maximum Power +22 dBm constant RF output
	176	+* High sensitivity: -148 dBm
	177	+* Temperature:
	178	+** Storage: -55 ~~ +125℃
	179	+** Operating: -40 ~~ +85℃
	180	+* Humidity:
	181	+** Storage: 5 ~~ 95% (Non-Condensing)
	182	+** Operating: 10 ~~ 95% (Non-Condensing)
	183	+* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
	184	+* LoRa Rx current: <9 mA
	185	+* I/O Voltage: 3.3v
102	102
103		-LA66 LoRaWAN Shield  >>>>>>>>>>>>USB TTL
	187	+== 2.4  Pin Mapping & LED ==
104	104
105		-GND  >>>>>>>>>>>>GND
106	106
107		-TXD  >>>>>>>>>>>>TXD
108	108
109		-RXD  >>>>>>>>>>>>RXD
	191	+== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
110	110
111		-JP6 of LA66 LoRaWAN Shield needs to be connected with yellow jumper cap
112	112
113		-Connect to the PC after connecting the wires
114	114
115		-[[image:image-20220602102240-4.png]]
	195	+== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
116	116
117		-=== Upgrade steps ===
118	118
119		-==== Dial the SW1 of the LA66 LoRaWAN Shield to the ISP's location as shown in the figure below ====
120	120
121		-[[image:image-20220602102824-5.png]]
	199	+== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
122	122
123		-==== Press the RST switch on the LA66 LoRaWAN Shield once ====
124	124
125		-[[image:image-20220602104701-12.png]]
126	126
127		-==== Open the upgrade application software ====
	203	+== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
128	128
129		-Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
130	130
	206	+=== 2.8.1  Items needed for update ===
	207	+
	208	+1. LA66 LoRaWAN Shield
	209	+1. Arduino
	210	+1. USB TO TTL Adapter
	211	+
	212	+[[image:image-20220602100052-2.png||height="385" width="600"]]
	213	+
	214	+
	215	+=== 2.8.2  Connection ===
	216	+
	217	+
	218	+[[image:image-20220602101311-3.png||height="276" width="600"]]
	219	+
	220	+
	221	+(((
	222	+(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
	223	+)))
	224	+
	225	+(((
	226	+(% style="background-color:yellow" %)**GND  <-> GND
	227	+TXD  <->  TXD
	228	+RXD  <->  RXD**
	229	+)))
	230	+
	231	+
	232	+Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
	233	+
	234	+Connect USB TTL Adapter to PC after connecting the wires
	235	+
	236	+
	237	+[[image:image-20220602102240-4.png||height="304" width="600"]]
	238	+
	239	+
	240	+=== 2.8.3  Upgrade steps ===
	241	+
	242	+
	243	+==== 1.  Switch SW1 to put in ISP position ====
	244	+
	245	+
	246	+[[image:image-20220602102824-5.png||height="306" width="600"]]
	247	+
	248	+
	249	+
	250	+==== 2.  Press the RST switch once ====
	251	+
	252	+
	253	+[[image:image-20220602104701-12.png||height="285" width="600"]]
	254	+
	255	+
	256	+
	257	+==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
	258	+
	259	+
	260	+(((
	261	+(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
	262	+)))
	263	+
	264	+
131	131	[[image:image-20220602103227-6.png]]
132	132
	267	+
133	133	[[image:image-20220602103357-7.png]]
134	134
135		-===== Select the COM port corresponding to USB TTL =====
136	136
	271	+
	272	+(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
	273	+(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
	274	+
	275	+
137	137	[[image:image-20220602103844-8.png]]
138	138
139		-===== Select the bin file to burn =====
140	140
	279	+
	280	+(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
	281	+(% style="color:blue" %)**3. Select the bin file to burn**
	282	+
	283	+
141	141	[[image:image-20220602104144-9.png]]
142	142
	286	+
143	143	[[image:image-20220602104251-10.png]]
144	144
	289	+
145	145	[[image:image-20220602104402-11.png]]
146	146
147		-===== Click to start the download =====
148	148
	293	+
	294	+(% class="wikigeneratedid" id="HClicktostartthedownload" %)
	295	+(% style="color:blue" %)**4. Click to start the download**
	296	+
149	149	[[image:image-20220602104923-13.png]]
150	150
151		-===== The following figure appears to prove that the burning is in progress =====
152	152
	300	+
	301	+(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
	302	+(% style="color:blue" %)**5. Check update process**
	303	+
	304	+
153	153	[[image:image-20220602104948-14.png]]
154	154
155		-===== The following picture appears to prove that the burning is successful =====
156	156
	308	+
	309	+(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
	310	+(% style="color:blue" %)**The following picture shows that the burning is successful**
	311	+
157	157	[[image:image-20220602105251-15.png]]
158	158
159		-= LA66 USB LoRaWAN Adapter =
160	160
161		-LA66 USB LoRaWAN Adapter is the USB Adapter for LA66, it combines a USB TTL Chip and LA66 module which can easy to test the LoRaWAN feature by using PC or embedded device which has USB Interface.
162	162
163		-Before use, please make sure that the computer has installed the CP2102 driver
	316	+= 3.  LA66 USB LoRaWAN Adapter =
164	164
165		-== Pin Mapping & LED ==
166	166
167		-== Example Send & Get Messages via LoRaWAN in PC ==
	319	+== 3.1  Overview ==
168	168
169		-Connect the LA66 LoRa Shield to the PC
170	170
171		-[[image:image-20220602171217-1.png||height="615" width="915"]]
	322	+[[image:image-20220715001142-3.png||height="145" width="220"]]
172	172
	324	+
	325	+(((
	326	+(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
	327	+)))
	328	+
	329	+(((
	330	+(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
	331	+)))
	332	+
	333	+(((
	334	+Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
	335	+)))
	336	+
	337	+(((
	338	+Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
	339	+)))
	340	+
	341	+(((
	342	+LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
	343	+)))
	344	+
	345	+
	346	+
	347	+== 3.2  Features ==
	348	+
	349	+* LoRaWAN USB adapter base on LA66 LoRaWAN module
	350	+* Ultra-long RF range
	351	+* Support LoRaWAN v1.0.4 protocol
	352	+* Support peer-to-peer protocol
	353	+* TCXO crystal to ensure RF performance on low temperature
	354	+* Spring RF antenna
	355	+* Available in different frequency LoRaWAN frequency bands.
	356	+* World-wide unique OTAA keys.
	357	+* AT Command via UART-TTL interface
	358	+* Firmware upgradable via UART interface
	359	+* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
	360	+
	361	+== 3.3  Specification ==
	362	+
	363	+* CPU: 32-bit 48 MHz
	364	+* Flash: 256KB
	365	+* RAM: 64KB
	366	+* Input Power Range: 5v
	367	+* Frequency Range: 150 MHz ~~ 960 MHz
	368	+* Maximum Power +22 dBm constant RF output
	369	+* High sensitivity: -148 dBm
	370	+* Temperature:
	371	+** Storage: -55 ~~ +125℃
	372	+** Operating: -40 ~~ +85℃
	373	+* Humidity:
	374	+** Storage: 5 ~~ 95% (Non-Condensing)
	375	+** Operating: 10 ~~ 95% (Non-Condensing)
	376	+* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
	377	+* LoRa Rx current: <9 mA
	378	+
	379	+== 3.4  Pin Mapping & LED ==
	380	+
	381	+
	382	+
	383	+== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
	384	+
	385	+
	386	+(((
	387	+Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
	388	+)))
	389	+
	390	+
	391	+(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
	392	+
	393	+
	394	+[[image:image-20220723100027-1.png]]
	395	+
	396	+
173	173	Open the serial port tool
174	174
175	175	[[image:image-20220602161617-8.png]]
176	176
177		-[[image:image-20220602161718-9.png||height="529" width="927"]]
	401	+[[image:image-20220602161718-9.png||height="457" width="800"]]
178	178
179		-Press the reset switch RST on the LA66 LoRa Shield.
180	180
181		-The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
182	182
183		-[[image:image-20220602161935-10.png]]
	405	+(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
184	184
185		-send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
	407	+The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
186	186
	409	+
	410	+[[image:image-20220602161935-10.png||height="498" width="800"]]
	411	+
	412	+
	413	+
	414	+(% style="color:blue" %)**3. See Uplink Command**
	415	+
	416	+Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
	417	+
187	187	example: AT+SENDB=01,02,8,05820802581ea0a5
188	188
189		-[[image:image-20220602162157-11.png]]
	420	+[[image:image-20220602162157-11.png||height="497" width="800"]]
190	190
191		-Check to see if TTN received the message
192	192
193		-[[image:image-20220602162331-12.png||height="547" width="1044"]]
194	194
195		-== Example Send & Get Messages via LoRaWAN in RPi ==
	424	+(% style="color:blue" %)**4. Check to see if TTN received the message**
196	196
197		-Connect the LA66 LoRa Shield to the RPI
	426	+[[image:image-20220602162331-12.png||height="420" width="800"]]
198	198
199		-[[image:image-20220602171233-2.png||height="592" width="881"]]
200	200
201		-Log in to the RPI's terminal and connect to the serial port
202	202
203		-[[image:image-20220602153146-3.png]]
	430	+== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
204	204
205		-Press the reset switch RST on the LA66 LoRa Shield.
206		-The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
207	207
208		-[[image:image-20220602154928-5.png]]
	433	+**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
209	209
210		-send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
	435	+(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
211	211
	437	+(% style="color:red" %)**Preconditions:**
	438	+
	439	+(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
	440	+
	441	+(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
	442	+
	443	+
	444	+
	445	+(% style="color:blue" %)**Steps for usage:**
	446	+
	447	+(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
	448	+
	449	+(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
	450	+
	451	+[[image:image-20220602115852-3.png||height="450" width="1187"]]
	452	+
	453	+
	454	+
	455	+== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
	456	+
	457	+
	458	+Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
	459	+
	460	+
	461	+(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
	462	+
	463	+[[image:image-20220723100439-2.png]]
	464	+
	465	+
	466	+
	467	+(% style="color:blue" %)**2. Install Minicom in RPi.**
	468	+
	469	+(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
	470	+
	471	+ (% style="background-color:yellow" %)**apt update**
	472	+
	473	+ (% style="background-color:yellow" %)**apt install minicom**
	474	+
	475	+
	476	+Use minicom to connect to the RPI's terminal
	477	+
	478	+[[image:image-20220602153146-3.png||height="439" width="500"]]
	479	+
	480	+
	481	+
	482	+(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
	483	+
	484	+The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
	485	+
	486	+
	487	+[[image:image-20220602154928-5.png||height="436" width="500"]]
	488	+
	489	+
	490	+
	491	+(% style="color:blue" %)**4. Send Uplink message**
	492	+
	493	+Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
	494	+
212	212	example: AT+SENDB=01,02,8,05820802581ea0a5
213	213
214		-[[image:image-20220602160339-6.png]]
215	215
	498	+[[image:image-20220602160339-6.png||height="517" width="600"]]
	499	+
	500	+
	501	+
216	216	Check to see if TTN received the message
217	217
218		-[[image:image-20220602160627-7.png||height="468" width="1013"]]
	504	+[[image:image-20220602160627-7.png||height="369" width="800"]]
219	219
220		-=== Install Minicom ===
221	221
222		-Enter the following command in the RPI terminal
223	223
224		-apt update
	508	+== 3.8  Example: Use of LA66 USB LoRaWAN Module and DRAGINO-LA66-APP. ==
225	225
226		-[[image:image-20220602143155-1.png]]
	510	+=== 3.8.1 DRAGINO-LA66-APP ===
227	227
228		-apt install minicom
	512	+[[image:image-20220723102027-3.png]]
229	229
230		-[[image:image-20220602143744-2.png]]
	514	+==== Overview： ====
231	231
232		-=== Send PC's CPU/RAM usage to TTN via script. ===
	516	+DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Module. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Module.
233	233
234		-==== Take python as an example： ====
	518	+View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
235	235
236		-===== Preconditions: =====
	520	+==== Conditions of Use： ====
237	237
238		-1.LA66 USB LoRaWAN Adapter works fine
	522	+Requires a type-c to USB adapter
239	239
240		-2.LA66 USB LoRaWAN Adapter  is registered with TTN
	524	+[[image:image-20220723104754-4.png]]
241	241
242		-===== Steps for usage =====
	526	+==== Use of APP: ====
243	243
244		-1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
	528	+Function and page introduction
245	245
246		-2.Run the script and see the TTN
	530	+[[image:image-20220723113448-7.png||height="1481" width="670"]]
247	247
248		-[[image:image-20220602115852-3.png]]
	532	+1.Display LA66 USB LoRaWAN Module connection status
249	249
	534	+2.Check and reconnect
250	250
	536	+3.Turn send timestamps on or off
251	251
252		-== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
	538	+4.Display LoRaWan connection status
253	253
	540	+5.Check LoRaWan connection status
254	254
255		-== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
	542	+6.The RSSI value of the node when the ACK is received
256	256
257		-
	544	+7.Node's Signal Strength Icon
	545	+
	546	+8.Set the packet sending interval of the node in seconds
	547	+
	548	+9.AT command input box
	549	+
	550	+10.Send AT command button
	551	+
	552	+11.Node log box
	553	+
	554	+12.clear log button
	555	+
	556	+13.exit button
	557	+
	558	+LA66 USB LoRaWAN Module not connected
	559	+
	560	+[[image:image-20220723110520-5.png||height="903" width="677"]]
	561	+
	562	+Connect LA66 USB LoRaWAN Module
	563	+
	564	+[[image:image-20220723110626-6.png||height="906" width="680"]]
	565	+
	566	+=== 3.8.2 Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Module and integrate it into Node-RED ===
	567	+
	568	+1.Register LA66 USB LoRaWAN Module to TTNV3
	569	+
	570	+[[image:image-20220723134549-8.png]]
	571	+
	572	+2.Open Node-RED,And import the JSON file to generate the flow
	573	+
	574	+Sample JSON file please go to this link to download：放置JSON文件的链接
	575	+
	576	+For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
	577	+
	578	+The following is the positioning effect map
	579	+
	580	+[[image:image-20220723144339-1.png]]
	581	+
	582	+== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
	583	+
	584	+The LA66 USB LoRaWAN Module is the same as the LA66 LoRaWAN Shield update method
	585	+
	586	+Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
	587	+
	588	+[[image:image-20220723150132-2.png]]
	589	+
	590	+
	591	+= 4.  Order Info =
	592	+
	593	+
	594	+**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
	595	+
	596	+
	597	+(% style="color:blue" %)**XXX**(%%): The default frequency band
	598	+
	599	+* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
	600	+* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
	601	+* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
	602	+* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
	603	+* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
	604	+* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
	605	+* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
	606	+* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
	607	+* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
	608	+
	609	+= 5.  Reference =
	610	+
	611	+* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]

image-20220715000242-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Edwin

Size

...	...	@@ -1,0 +1,1 @@
	1	+172.4 KB

Content

image-20220715000826-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Edwin

Size

...	...	@@ -1,0 +1,1 @@
	1	+820.7 KB

Content

image-20220715001142-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Edwin

Size

...	...	@@ -1,0 +1,1 @@
	1	+508.1 KB

Content

image-20220718094030-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+193.3 KB

Content

image-20220718094138-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+100.3 KB

Content

image-20220718094750-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+97.9 KB

Content

image-20220718094950-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+97.7 KB

Content

image-20220718095457-5.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+98.0 KB

Content

image-20220719093156-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+381.2 KB

Content

image-20220719093358-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+649.5 KB

Content

image-20220720111850-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+380.3 KB

Content

image-20220723100027-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Lu

Size

...	...	@@ -1,0 +1,1 @@
	1	+1.1 MB

Content

image-20220723100439-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Lu

Size

...	...	@@ -1,0 +1,1 @@
	1	+749.8 KB

Content

image-20220723102027-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Lu

Size

...	...	@@ -1,0 +1,1 @@
	1	+28.7 KB

Content

image-20220723104754-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Lu

Size

...	...	@@ -1,0 +1,1 @@
	1	+231.5 KB

Content

image-20220723110520-5.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Lu

Size

...	...	@@ -1,0 +1,1 @@
	1	+3.2 MB

Content

image-20220723110626-6.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Lu

Size

...	...	@@ -1,0 +1,1 @@
	1	+3.6 MB

Content

image-20220723113448-7.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Lu

Size

...	...	@@ -1,0 +1,1 @@
	1	+298.5 KB

Content

image-20220723134549-8.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Lu

Size

...	...	@@ -1,0 +1,1 @@
	1	+392.3 KB

Content

image-20220723144339-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Lu

Size

...	...	@@ -1,0 +1,1 @@
	1	+324.7 KB

Content

image-20220723150132-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Lu

Size

...	...	@@ -1,0 +1,1 @@
	1	+698.8 KB

Content

image-20220723165950-1.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Lu

Size

...	...	@@ -1,0 +1,1 @@
	1	+278.4 KB

Content

image-20220723170210-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Lu

Size

...	...	@@ -1,0 +1,1 @@
	1	+883.0 KB

Content