Summary

• Page properties (3 modified, 0 added, 0 removed)
• Attachments (0 modified, 38 added, 0 removed)
  • image-20220715000242-1.png
  • image-20220715000826-2.png
  • image-20220715001142-3.png
  • image-20220718094030-1.png
  • image-20220718094138-2.png
  • image-20220718094750-3.png
  • image-20220718094950-4.png
  • image-20220718095457-5.png
  • image-20220719093156-1.png
  • image-20220719093358-2.png
  • image-20220720111850-1.png
  • image-20220723100027-1.png
  • image-20220723100439-2.png
  • image-20220723102027-3.png
  • image-20220723104754-4.png
  • image-20220723110520-5.png
  • image-20220723110626-6.png
  • image-20220723113448-7.png
  • image-20220723134549-8.png
  • image-20220723144339-1.png
  • image-20220723150132-2.png
  • image-20220723165950-1.jpeg
  • image-20220723170210-2.png
  • image-20220723170545-4.png
  • image-20220723170750-5.png
  • image-20220723171228-6.png
  • image-20220723172235-7.png
  • image-20220723172502-8.png
  • image-20220723172938-9.png
  • image-20220723173341-10.png
  • image-20220723173950-11.png
  • image-20220723175700-12.png
  • image-20220726135239-1.png
  • image-20220726135356-2.png
  • image-20220813173738-1.png
  • image-20220813174353-2.png
  • image-20220813183239-3.png
  • image-20220814101457-1.png

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-LA66 LoRaWAN Module
	1	+LA66 LoRaWAN Shield User Manual

Author

...	...	@@ -1,1 +1,1 @@
1		-XWiki.Edwin
	1	+XWiki.Xiaoling

Content

...	...	@@ -1,264 +1,650 @@
1		-{{box cssClass="floatinginfobox" title="**Contents**"}}
	1	+
	2	+
	3	+**Table of Contents:**
	4	+
2	2	{{toc/}}
3		-{{/box}}
4	4
5		-= LA66 LoRaWAN Module =
6	6
7		-== What is LA66 LoRaWAN Module ==
8	8
9		-(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
10	10
11		-(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
	10	+= 1.  LA66 LoRaWAN Shield =
12	12
	12	+
	13	+== 1.1  Overview ==
	14	+
	15	+
	16	+(((
	17	+[[image:image-20220715000826-2.png||height="145" width="220"]]
	18	+)))
	19	+
	20	+(((
	21	+
	22	+)))
	23	+
	24	+(((
	25	+(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
	26	+)))
	27	+
	28	+(((
	29	+(((
	30	+(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
	31	+)))
	32	+)))
	33	+
	34	+(((
	35	+(((
13	13	Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
	37	+)))
	38	+)))
14	14
	40	+(((
	41	+(((
15	15	Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
	43	+)))
	44	+)))
16	16
	46	+(((
	47	+(((
17	17	LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
	49	+)))
	50	+)))
18	18
19		-== Features ==
20	20
21	21
22		-== Specification ==
	54	+== 1.2  Features ==
23	23
24		-[[image:image-20220517072526-1.png]]
25	25
26		-Input Power Range: 1.8v ~~ 3.7v
	57	+* Arduino Shield base on LA66 LoRaWAN module
	58	+* Support LoRaWAN v1.0.4 protocol
	59	+* Support peer-to-peer protocol
	60	+* TCXO crystal to ensure RF performance on low temperature
	61	+* SMA connector
	62	+* Available in different frequency LoRaWAN frequency bands.
	63	+* World-wide unique OTAA keys.
	64	+* AT Command via UART-TTL interface
	65	+* Firmware upgradable via UART interface
	66	+* Ultra-long RF range
27	27
28		-Power Consumption: < 4uA.
29	29
30		-Frequency Range: 150 MHz ~~ 960 MHz
31	31
32		-Maximum Power +22 dBm constant RF output
33	33
34		-High sensitivity: -148 dBm
	71	+== 1.3  Specification ==
35	35
36		-Temperature:
37	37
38		-* Storage: -55 ~~ +125℃
39		-* Operating: -40 ~~ +85℃
	74	+* CPU: 32-bit 48 MHz
	75	+* Flash: 256KB
	76	+* RAM: 64KB
	77	+* Input Power Range: 1.8v ~~ 3.7v
	78	+* Power Consumption: < 4uA.
	79	+* Frequency Range: 150 MHz ~~ 960 MHz
	80	+* Maximum Power +22 dBm constant RF output
	81	+* High sensitivity: -148 dBm
	82	+* Temperature:
	83	+** Storage: -55 ~~ +125℃
	84	+** Operating: -40 ~~ +85℃
	85	+* Humidity:
	86	+** Storage: 5 ~~ 95% (Non-Condensing)
	87	+** Operating: 10 ~~ 95% (Non-Condensing)
	88	+* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
	89	+* LoRa Rx current: <9 mA
	90	+* I/O Voltage: 3.3v
40	40
41		-Humidity:
42	42
43		-* Storage: 5 ~~ 95% (Non-Condensing)
44		-* Operating: 10 ~~ 95% (Non-Condensing)
45	45
46		-LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
47	47
48		-LoRa Rx current: <9 mA
	95	+== 1.4  Pin Mapping & LED ==
49	49
50		-I/O Voltage: 3.3v
51	51
	98	+[[image:image-20220814101457-1.png||height="553" width="761"]]
52	52
53		-== AT Command ==
	100	+~1. The LED lights up red when there is an upstream data packet
	101	+2. When the network is successfully connected, the green light will be on for 5 seconds
	102	+3. Purple light on when receiving downlink data packets
54	54
55		-AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
56	56
57	57
58		-== Pin Mapping ==
	106	+== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
59	59
60		-[[image:image-20220523101537-1.png]]
61	61
62		-== Land Pattern ==
	109	+**Show connection diagram：**
63	63
64		-[[image:image-20220517072821-2.png]]
65	65
	112	+[[image:image-20220723170210-2.png||height="908" width="681"]]
66	66
67		-== Part Number ==
68	68
69		-Part Number: **LA66-XXX**
70	70
71		-**XX**: The default frequency band
	116	+(% style="color:blue" %)**1.  open Arduino IDE**
72	72
73		-* **AS923**: LoRaWAN AS923 band
74		-* **AU915**: LoRaWAN AU915 band
75		-* **EU433**: LoRaWAN EU433 band
76		-* **EU868**: LoRaWAN EU868 band
77		-* **KR920**: LoRaWAN KR920 band
78		-* **US915**: LoRaWAN US915 band
79		-* **IN865**: LoRaWAN IN865 band
80		-* **CN470**: LoRaWAN CN470 band
81	81
82		-= LA66 LoRaWAN Shield =
	119	+[[image:image-20220723170545-4.png]]
83	83
84		-LA66 LoRaWAN Shield is the Arduino Breakout PCB to fast test the features of LA66 module and turn Arduino to support LoRaWAN.
85	85
86		-== Pin Mapping & LED ==
87	87
88		-== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
	123	+(% style="color:blue" %)**2.  Open project**
89	89
90		-== Example: Join TTN network and send an uplink message, get downlink message. ==
91	91
92		-== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
	126	+LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
93	93
94		-== Upgrade Firmware of LA66 LoRaWAN Shield ==
	128	+[[image:image-20220726135239-1.png]]
95	95
96		-=== what needs to be used ===
97	97
98		-1.LA66 LoRaWAN Shield that needs to be upgraded
	131	+(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
99	99
100		-2.Arduino
	133	+[[image:image-20220726135356-2.png]]
101	101
102		-3.USB TO TTL
103	103
104		-[[image:image-20220602100052-2.png]]
	136	+(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
105	105
106		-=== Wiring Schematic ===
107	107
108		-[[image:image-20220602101311-3.png]]
	139	+[[image:image-20220723172235-7.png||height="480" width="1027"]]
109	109
110		-LA66 LoRaWAN Shield  >>>>>>>>>>>>USB TTL
111	111
112		-GND  >>>>>>>>>>>>GND
113	113
114		-TXD  >>>>>>>>>>>>TXD
	143	+== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
115	115
116		-RXD  >>>>>>>>>>>>RXD
117	117
118		-JP6 of LA66 LoRaWAN Shield needs to be connected with yellow jumper cap
	146	+(% style="color:blue" %)**1.  Open project**
119	119
120		-Connect to the PC after connecting the wires
121	121
122		-[[image:image-20220602102240-4.png]]
	149	+Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
123	123
124		-=== Upgrade steps ===
125	125
126		-==== Dial the SW1 of the LA66 LoRaWAN Shield to the ISP's location as shown in the figure below ====
	152	+[[image:image-20220723172502-8.png]]
127	127
128		-[[image:image-20220602102824-5.png]]
129	129
130		-==== Press the RST switch on the LA66 LoRaWAN Shield once ====
131	131
132		-[[image:image-20220602104701-12.png]]
	156	+(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
133	133
134		-==== Open the upgrade application software ====
135	135
136		-Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
	159	+[[image:image-20220723172938-9.png||height="652" width="1050"]]
137	137
	161	+
	162	+
	163	+== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
	164	+
	165	+
	166	+(% style="color:blue" %)**1.  Open project**
	167	+
	168	+
	169	+Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
	170	+
	171	+
	172	+[[image:image-20220723173341-10.png||height="581" width="1014"]]
	173	+
	174	+
	175	+
	176	+(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
	177	+
	178	+
	179	+[[image:image-20220723173950-11.png||height="665" width="1012"]]
	180	+
	181	+
	182	+
	183	+(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
	184	+
	185	+For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
	186	+
	187	+[[image:image-20220723175700-12.png||height="602" width="995"]]
	188	+
	189	+
	190	+
	191	+== 1.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
	192	+
	193	+
	194	+=== 1.8.1  Items needed for update ===
	195	+
	196	+
	197	+1. LA66 LoRaWAN Shield
	198	+1. Arduino
	199	+1. USB TO TTL Adapter
	200	+
	201	+[[image:image-20220602100052-2.png||height="385" width="600"]]
	202	+
	203	+
	204	+
	205	+=== 1.8.2  Connection ===
	206	+
	207	+
	208	+[[image:image-20220602101311-3.png||height="276" width="600"]]
	209	+
	210	+
	211	+(((
	212	+(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
	213	+)))
	214	+
	215	+(((
	216	+(% style="background-color:yellow" %)**GND  <-> GND
	217	+TXD  <->  TXD
	218	+RXD  <->  RXD**
	219	+)))
	220	+
	221	+
	222	+Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
	223	+
	224	+Connect USB TTL Adapter to PC after connecting the wires
	225	+
	226	+
	227	+[[image:image-20220602102240-4.png||height="304" width="600"]]
	228	+
	229	+
	230	+
	231	+=== 2.8.3  Upgrade steps ===
	232	+
	233	+
	234	+==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
	235	+
	236	+
	237	+[[image:image-20220602102824-5.png||height="306" width="600"]]
	238	+
	239	+
	240	+
	241	+==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
	242	+
	243	+
	244	+[[image:image-20220602104701-12.png||height="285" width="600"]]
	245	+
	246	+
	247	+
	248	+==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
	249	+
	250	+
	251	+(((
	252	+(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
	253	+)))
	254	+
	255	+
138	138	[[image:image-20220602103227-6.png]]
139	139
	258	+
140	140	[[image:image-20220602103357-7.png]]
141	141
142		-===== Select the COM port corresponding to USB TTL =====
143	143
	262	+
	263	+(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
	264	+(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
	265	+
	266	+
144	144	[[image:image-20220602103844-8.png]]
145	145
146		-===== Select the bin file to burn =====
147	147
	270	+
	271	+(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
	272	+(% style="color:blue" %)**3. Select the bin file to burn**
	273	+
	274	+
148	148	[[image:image-20220602104144-9.png]]
149	149
	277	+
150	150	[[image:image-20220602104251-10.png]]
151	151
	280	+
152	152	[[image:image-20220602104402-11.png]]
153	153
154		-===== Click to start the download =====
155	155
	284	+
	285	+(% class="wikigeneratedid" id="HClicktostartthedownload" %)
	286	+(% style="color:blue" %)**4. Click to start the download**
	287	+
156	156	[[image:image-20220602104923-13.png]]
157	157
158		-===== The following figure appears to prove that the burning is in progress =====
159	159
	291	+
	292	+(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
	293	+(% style="color:blue" %)**5. Check update process**
	294	+
	295	+
160	160	[[image:image-20220602104948-14.png]]
161	161
162		-===== The following picture appears to prove that the burning is successful =====
163	163
	299	+
	300	+(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
	301	+(% style="color:blue" %)**The following picture shows that the burning is successful**
	302	+
164	164	[[image:image-20220602105251-15.png]]
165	165
166		-= LA66 USB LoRaWAN Adapter =
167	167
168		-LA66 USB LoRaWAN Adapter is the USB Adapter for LA66, it combines a USB TTL Chip and LA66 module which can easy to test the LoRaWAN feature by using PC or embedded device which has USB Interface.
169	169
170		-Before use, please make sure that the computer has installed the CP2102 driver
	307	+= 3.  LA66 USB LoRaWAN Adapter =
171	171
172		-== Pin Mapping & LED ==
173	173
174		-== Example Send & Get Messages via LoRaWAN in PC ==
	310	+== 3.1  Overview ==
175	175
176		-Connect the LA66 LoRa Shield to the PC
177	177
178		-[[image:image-20220602171217-1.png||height="615" width="915"]]
	313	+[[image:image-20220715001142-3.png||height="145" width="220"]]
179	179
	315	+
	316	+(((
	317	+(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
	318	+)))
	319	+
	320	+(((
	321	+(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
	322	+)))
	323	+
	324	+(((
	325	+Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
	326	+)))
	327	+
	328	+(((
	329	+Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
	330	+)))
	331	+
	332	+(((
	333	+LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
	334	+)))
	335	+
	336	+
	337	+
	338	+== 3.2  Features ==
	339	+
	340	+
	341	+* LoRaWAN USB adapter base on LA66 LoRaWAN module
	342	+* Ultra-long RF range
	343	+* Support LoRaWAN v1.0.4 protocol
	344	+* Support peer-to-peer protocol
	345	+* TCXO crystal to ensure RF performance on low temperature
	346	+* Spring RF antenna
	347	+* Available in different frequency LoRaWAN frequency bands.
	348	+* World-wide unique OTAA keys.
	349	+* AT Command via UART-TTL interface
	350	+* Firmware upgradable via UART interface
	351	+* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
	352	+
	353	+== 3.3  Specification ==
	354	+
	355	+
	356	+* CPU: 32-bit 48 MHz
	357	+* Flash: 256KB
	358	+* RAM: 64KB
	359	+* Input Power Range: 5v
	360	+* Frequency Range: 150 MHz ~~ 960 MHz
	361	+* Maximum Power +22 dBm constant RF output
	362	+* High sensitivity: -148 dBm
	363	+* Temperature:
	364	+** Storage: -55 ~~ +125℃
	365	+** Operating: -40 ~~ +85℃
	366	+* Humidity:
	367	+** Storage: 5 ~~ 95% (Non-Condensing)
	368	+** Operating: 10 ~~ 95% (Non-Condensing)
	369	+* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
	370	+* LoRa Rx current: <9 mA
	371	+
	372	+== 3.4  Pin Mapping & LED ==
	373	+
	374	+[[image:image-20220813183239-3.png||height="526" width="662"]]
	375	+
	376	+
	377	+== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
	378	+
	379	+
	380	+(((
	381	+Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
	382	+)))
	383	+
	384	+
	385	+(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
	386	+
	387	+
	388	+[[image:image-20220723100027-1.png]]
	389	+
	390	+
180	180	Open the serial port tool
181	181
182	182	[[image:image-20220602161617-8.png]]
183	183
184		-[[image:image-20220602161718-9.png||height="529" width="927"]]
	395	+[[image:image-20220602161718-9.png||height="457" width="800"]]
185	185
186		-Press the reset switch RST on the LA66 LoRa Shield.
187	187
188		-The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
189	189
190		-[[image:image-20220602161935-10.png]]
	399	+(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
191	191
192		-send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
	401	+The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
193	193
	403	+
	404	+[[image:image-20220602161935-10.png||height="498" width="800"]]
	405	+
	406	+
	407	+
	408	+(% style="color:blue" %)**3. See Uplink Command**
	409	+
	410	+Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
	411	+
194	194	example: AT+SENDB=01,02,8,05820802581ea0a5
195	195
196		-[[image:image-20220602162157-11.png]]
	414	+[[image:image-20220602162157-11.png||height="497" width="800"]]
197	197
198		-Check to see if TTN received the message
199	199
200		-[[image:image-20220602162331-12.png||height="547" width="1044"]]
201	201
202		-== Example Send & Get Messages via LoRaWAN in RPi ==
	418	+(% style="color:blue" %)**4. Check to see if TTN received the message**
203	203
204		-Connect the LA66 LoRa Shield to the RPI
	420	+[[image:image-20220602162331-12.png||height="420" width="800"]]
205	205
206		-[[image:image-20220602171233-2.png||height="592" width="881"]]
207	207
208		-Log in to the RPI's terminal and connect to the serial port
209	209
210		-[[image:image-20220602153146-3.png]]
	424	+== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
211	211
212		-Press the reset switch RST on the LA66 LoRa Shield.
213		-The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
214	214
215		-[[image:image-20220602154928-5.png]]
	427	+**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
216	216
217		-send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
	429	+(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
218	218
	431	+(% style="color:red" %)**Preconditions:**
	432	+
	433	+(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
	434	+
	435	+(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
	436	+
	437	+
	438	+
	439	+(% style="color:blue" %)**Steps for usage:**
	440	+
	441	+(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
	442	+
	443	+(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
	444	+
	445	+[[image:image-20220602115852-3.png||height="450" width="1187"]]
	446	+
	447	+
	448	+
	449	+== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
	450	+
	451	+
	452	+Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
	453	+
	454	+
	455	+(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
	456	+
	457	+[[image:image-20220723100439-2.png]]
	458	+
	459	+
	460	+
	461	+(% style="color:blue" %)**2. Install Minicom in RPi.**
	462	+
	463	+(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
	464	+
	465	+ (% style="background-color:yellow" %)**apt update**
	466	+
	467	+ (% style="background-color:yellow" %)**apt install minicom**
	468	+
	469	+
	470	+Use minicom to connect to the RPI's terminal
	471	+
	472	+[[image:image-20220602153146-3.png||height="439" width="500"]]
	473	+
	474	+
	475	+
	476	+(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
	477	+
	478	+The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
	479	+
	480	+
	481	+[[image:image-20220602154928-5.png||height="436" width="500"]]
	482	+
	483	+
	484	+
	485	+(% style="color:blue" %)**4. Send Uplink message**
	486	+
	487	+Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
	488	+
219	219	example: AT+SENDB=01,02,8,05820802581ea0a5
220	220
221		-[[image:image-20220602160339-6.png]]
222	222
	492	+[[image:image-20220602160339-6.png||height="517" width="600"]]
	493	+
	494	+
	495	+
223	223	Check to see if TTN received the message
224	224
225		-[[image:image-20220602160627-7.png||height="468" width="1013"]]
	498	+[[image:image-20220602160627-7.png||height="369" width="800"]]
226	226
227		-=== Install Minicom ===
228	228
229		-Enter the following command in the RPI terminal
230	230
231		-apt update
	502	+== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
232	232
233		-[[image:image-20220602143155-1.png]]
234	234
235		-apt install minicom
	505	+=== 3.8.1  Hardware and Software Connection ===
236	236
237		-[[image:image-20220602143744-2.png]]
238	238
239		-=== Send PC's CPU/RAM usage to TTN via script. ===
	508	+==== (% style="color:blue" %)**Overview：**(%%) ====
240	240
241		-==== Take python as an example： ====
242	242
243		-===== Preconditions: =====
	511	+(((
	512	+DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
244	244
245		-1.LA66 USB LoRaWAN Adapter works fine
	514	+* Send real-time location information of mobile phone to LoRaWAN network.
	515	+* Check LoRaWAN network signal strengh.
	516	+* Manually send messages to LoRaWAN network.
	517	+)))
246	246
247		-2.LA66 USB LoRaWAN Adapter  is registered with TTN
248	248
249		-===== Steps for usage =====
250	250
251		-1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
	521	+==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
252	252
253		-2.Run the script and see the TTN
	523	+A USB to Type-C adapter is needed to connect to a Mobile phone.
254	254
255		-[[image:image-20220602115852-3.png]]
	525	+Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
256	256
	527	+[[image:image-20220813174353-2.png||height="360" width="313"]]
257	257
258	258
259		-== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
	530	+==== (% style="color:blue" %)**Download and Install App:**(%%) ====
260	260
	532	+[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
261	261
262		-== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
	534	+[[image:image-20220813173738-1.png]]
263	263
264		-
	536	+
	537	+==== (% style="color:blue" %)**Use of APP:**(%%) ====
	538	+
	539	+Function and page introduction
	540	+
	541	+[[image:image-20220723113448-7.png||height="995" width="450"]]
	542	+
	543	+**Block Explain:**
	544	+
	545	+1.  Display LA66 USB LoRaWAN Module connection status
	546	+
	547	+2.  Check and reconnect
	548	+
	549	+3.  Turn send timestamps on or off
	550	+
	551	+4.  Display LoRaWan connection status
	552	+
	553	+5.  Check LoRaWan connection status
	554	+
	555	+6.  The RSSI value of the node when the ACK is received
	556	+
	557	+7.  Node's Signal Strength Icon
	558	+
	559	+8.  Configure Location Uplink Interval
	560	+
	561	+9.  AT command input box
	562	+
	563	+10.  Send Button:  Send input box info to LA66 USB Adapter
	564	+
	565	+11.  Output Log from LA66 USB adapter
	566	+
	567	+12.  clear log button
	568	+
	569	+13.  exit button
	570	+
	571	+
	572	+LA66 USB LoRaWAN Module not connected
	573	+
	574	+[[image:image-20220723110520-5.png||height="677" width="508"]]
	575	+
	576	+
	577	+
	578	+Connect LA66 USB LoRaWAN Module
	579	+
	580	+[[image:image-20220723110626-6.png||height="681" width="511"]]
	581	+
	582	+
	583	+
	584	+=== 3.8.2 Send data to TTNv3 and plot location info in Node-Red ===
	585	+
	586	+
	587	+(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
	588	+
	589	+[[image:image-20220723134549-8.png]]
	590	+
	591	+
	592	+
	593	+(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
	594	+
	595	+Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
	596	+
	597	+For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
	598	+
	599	+After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
	600	+
	601	+
	602	+Example output in NodeRed is as below:
	603	+
	604	+[[image:image-20220723144339-1.png]]
	605	+
	606	+
	607	+
	608	+== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
	609	+
	610	+
	611	+The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
	612	+
	613	+Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
	614	+
	615	+[[image:image-20220723150132-2.png]]
	616	+
	617	+
	618	+
	619	+= 4.  FAQ =
	620	+
	621	+
	622	+== 4.1  How to Compile Source Code for LA66? ==
	623	+
	624	+
	625	+Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
	626	+
	627	+
	628	+
	629	+= 5.  Order Info =
	630	+
	631	+
	632	+**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
	633	+
	634	+
	635	+(% style="color:blue" %)**XXX**(%%): The default frequency band
	636	+
	637	+* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
	638	+* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
	639	+* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
	640	+* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
	641	+* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
	642	+* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
	643	+* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
	644	+* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
	645	+* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
	646	+
	647	+= 6.  Reference =
	648	+
	649	+
	650	+* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]

image-20220715000242-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+172.4 KB

Content

image-20220715000826-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+820.7 KB

Content

image-20220715001142-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+508.1 KB

Content

image-20220718094030-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+193.3 KB

Content

image-20220718094138-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+100.3 KB

Content

image-20220718094750-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+97.9 KB

Content

image-20220718094950-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+97.7 KB

Content

image-20220718095457-5.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+98.0 KB

Content

image-20220719093156-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+381.2 KB

Content

image-20220719093358-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+649.5 KB

Content

image-20220720111850-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+380.3 KB

Content

image-20220723100027-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+1.1 MB

Content

image-20220723100439-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+749.8 KB

Content

image-20220723102027-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+28.7 KB

Content

image-20220723104754-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+231.5 KB

Content

image-20220723110520-5.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+3.2 MB

Content

image-20220723110626-6.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+3.6 MB

Content

image-20220723113448-7.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+298.5 KB

Content

image-20220723134549-8.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+392.3 KB

Content

image-20220723144339-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+324.7 KB

Content

image-20220723150132-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+698.8 KB

Content

image-20220723165950-1.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+278.4 KB

Content

image-20220723170210-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+883.0 KB

Content

image-20220723170545-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+31.1 KB

Content

image-20220723170750-5.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+119.0 KB

Content

image-20220723171228-6.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+34.2 KB

Content

image-20220723172235-7.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+262.3 KB

Content

image-20220723172502-8.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+112.0 KB

Content

image-20220723172938-9.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+104.8 KB

Content

image-20220723173341-10.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+117.9 KB

Content

image-20220723173950-11.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+121.9 KB

Content

image-20220723175700-12.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+96.4 KB

Content

image-20220726135239-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+91.4 KB

Content

image-20220726135356-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+45.6 KB

Content

image-20220813173738-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+13.2 KB

Content

image-20220813174353-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+189.1 KB

Content

image-20220813183239-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+642.4 KB

Content

image-20220814101457-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+913.4 KB

Content