Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 166.4
edited by Xiaoling
on 2023/05/26 14:19
To version < 131.1 >
edited by Herong Lu
on 2022/07/23 17:41
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Lu
Content
... ... @@ -1,4 +1,4 @@
1 -
1 +0
2 2  
3 3  **Table of Contents:**
4 4  
... ... @@ -6,13 +6,114 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 11  
12 -== 1.1  Overview ==
12 +== 1.1  What is LA66 LoRaWAN Module ==
13 13  
14 14  
15 15  (((
16 +(((
17 +[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 +)))
19 +
20 +(((
21 +
22 +)))
23 +
24 +(((
25 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 +)))
27 +)))
28 +
29 +(((
30 +(((
31 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 +)))
33 +)))
34 +
35 +(((
36 +(((
37 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 +)))
39 +
40 +(((
41 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 +)))
43 +)))
44 +
45 +(((
46 +(((
47 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 +)))
49 +)))
50 +
51 +
52 +
53 +== 1.2  Features ==
54 +
55 +* Support LoRaWAN v1.0.4 protocol
56 +* Support peer-to-peer protocol
57 +* TCXO crystal to ensure RF performance on low temperature
58 +* SMD Antenna pad and i-pex antenna connector
59 +* Available in different frequency LoRaWAN frequency bands.
60 +* World-wide unique OTAA keys.
61 +* AT Command via UART-TTL interface
62 +* Firmware upgradable via UART interface
63 +* Ultra-long RF range
64 +
65 +== 1.3  Specification ==
66 +
67 +* CPU: 32-bit 48 MHz
68 +* Flash: 256KB
69 +* RAM: 64KB
70 +* Input Power Range: 1.8v ~~ 3.7v
71 +* Power Consumption: < 4uA.
72 +* Frequency Range: 150 MHz ~~ 960 MHz
73 +* Maximum Power +22 dBm constant RF output
74 +* High sensitivity: -148 dBm
75 +* Temperature:
76 +** Storage: -55 ~~ +125℃
77 +** Operating: -40 ~~ +85℃
78 +* Humidity:
79 +** Storage: 5 ~~ 95% (Non-Condensing)
80 +** Operating: 10 ~~ 95% (Non-Condensing)
81 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
82 +* LoRa Rx current: <9 mA
83 +* I/O Voltage: 3.3v
84 +
85 +== 1.4  AT Command ==
86 +
87 +
88 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
89 +
90 +
91 +
92 +== 1.5  Dimension ==
93 +
94 +[[image:image-20220718094750-3.png]]
95 +
96 +
97 +
98 +== 1.6  Pin Mapping ==
99 +
100 +[[image:image-20220720111850-1.png]]
101 +
102 +
103 +
104 +== 1.7  Land Pattern ==
105 +
106 +[[image:image-20220517072821-2.png]]
107 +
108 +
109 +
110 += 2.  LA66 LoRaWAN Shield =
111 +
112 +
113 +== 2.1  Overview ==
114 +
115 +
116 +(((
16 16  [[image:image-20220715000826-2.png||height="145" width="220"]]
17 17  )))
18 18  
... ... @@ -49,11 +49,11 @@
49 49  )))
50 50  
51 51  
52 -== 1.2  Features ==
53 53  
154 +== 2.2  Features ==
54 54  
55 55  * Arduino Shield base on LA66 LoRaWAN module
56 -* Support LoRaWAN v1.0.3 protocol
157 +* Support LoRaWAN v1.0.4 protocol
57 57  * Support peer-to-peer protocol
58 58  * TCXO crystal to ensure RF performance on low temperature
59 59  * SMA connector
... ... @@ -63,10 +63,8 @@
63 63  * Firmware upgradable via UART interface
64 64  * Ultra-long RF range
65 65  
167 +== 2.3  Specification ==
66 66  
67 -== 1.3  Specification ==
68 -
69 -
70 70  * CPU: 32-bit 48 MHz
71 71  * Flash: 256KB
72 72  * RAM: 64KB
... ... @@ -85,343 +85,463 @@
85 85  * LoRa Rx current: <9 mA
86 86  * I/O Voltage: 3.3v
87 87  
187 +== 2.4  LED ==
88 88  
89 -== 1.4  Pin Mapping & LED ==
189 +~1. The LED lights up red when there is an upstream data packet
190 +2. When the network is successfully connected, the green light will be on for 5 seconds
191 +3. Purple light on when receiving downlink data packets
90 90  
91 91  
92 -[[image:image-20220817085048-1.png||height="533" width="734"]]
194 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
93 93  
196 +Show connection diagram：
94 94  
198 +[[image:image-20220723170210-2.png||height="908" width="681"]]
95 95  
96 -~1. The LED lights up red when there is an upstream data packet
200 +1.open Arduino IDE
97 97  
98 -2. When the network is successfully connected, the green light will be on for 5 seconds
202 +[[image:image-20220723170545-4.png]]
99 99  
100 -3. Purple light on when receiving downlink data packets
204 +2.Open project
101 101  
206 +[[image:image-20220723170750-5.png||height="533" width="930"]]
102 102  
103 -[[image:image-20220820112305-1.png||height="515" width="749"]]
208 +3.Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload
104 104  
210 +[[image:image-20220723171228-6.png]]
105 105  
106 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
212 +4.After the upload is successful, open the serial port monitoring and send the AT command
107 107  
214 +[[image:image-20220723172235-7.png||height="480" width="1027"]]
108 108  
109 -(% style="color:blue" %)**Show connection diagram：**
216 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
110 110  
218 +1.Open project
111 111  
112 -[[image:image-20220723170210-2.png||height="908" width="681"]]
220 +[[image:image-20220723172502-8.png]]
113 113  
222 +2.Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets
114 114  
224 +[[image:image-20220723172938-9.png||height="652" width="1050"]]
115 115  
116 -(% style="color:blue" %)**1.  open Arduino IDE**
117 117  
227 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
118 118  
119 -[[image:image-20220723170545-4.png]]
229 +1.Open project
120 120  
231 +[[image:image-20220723173341-10.png||height="581" width="1014"]]
121 121  
233 +2.Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets
122 122  
123 -(% style="color:blue" %)**2.  Open project**
235 +[[image:image-20220723173950-11.png||height="665" width="1012"]]
124 124  
125 125  
126 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
238 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
127 127  
128 -[[image:image-20220726135239-1.png]]
129 129  
241 +=== 2.8.1  Items needed for update ===
130 130  
243 +1. LA66 LoRaWAN Shield
244 +1. Arduino
245 +1. USB TO TTL Adapter
131 131  
132 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
247 +[[image:image-20220602100052-2.png||height="385" width="600"]]
133 133  
134 134  
135 -[[image:image-20220726135356-2.png]]
250 +=== 2.8.2  Connection ===
136 136  
137 137  
253 +[[image:image-20220602101311-3.png||height="276" width="600"]]
138 138  
139 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
140 140  
256 +(((
257 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
258 +)))
141 141  
142 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
260 +(((
261 +(% style="background-color:yellow" %)**GND  <-> GND
262 +TXD  <->  TXD
263 +RXD  <->  RXD**
264 +)))
143 143  
144 144  
145 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
267 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
146 146  
269 +Connect USB TTL Adapter to PC after connecting the wires
147 147  
148 -(% style="color:blue" %)**1.  Open project**
149 149  
272 +[[image:image-20220602102240-4.png||height="304" width="600"]]
150 150  
151 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
152 152  
275 +=== 2.8.3  Upgrade steps ===
153 153  
154 -[[image:image-20220723172502-8.png]]
155 155  
278 +==== 1.  Switch SW1 to put in ISP position ====
156 156  
157 157  
158 -(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
281 +[[image:image-20220602102824-5.png||height="306" width="600"]]
159 159  
160 160  
161 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
162 162  
285 +==== 2.  Press the RST switch once ====
163 163  
164 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
165 165  
288 +[[image:image-20220602104701-12.png||height="285" width="600"]]
166 166  
167 -(% style="color:blue" %)**1.  Open project**
168 168  
169 169  
170 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0>>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
292 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
171 171  
172 172  
173 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
295 +(((
296 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
297 +)))
174 174  
175 175  
300 +[[image:image-20220602103227-6.png]]
176 176  
177 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
178 178  
303 +[[image:image-20220602103357-7.png]]
179 179  
180 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
181 181  
182 182  
307 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
308 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
183 183  
184 184  
311 +[[image:image-20220602103844-8.png]]
185 185  
186 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
187 187  
188 188  
189 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
315 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
316 +(% style="color:blue" %)**3. Select the bin file to burn**
190 190  
191 191  
192 -[[image:image-20220723175700-12.png||height="602" width="995"]]
319 +[[image:image-20220602104144-9.png]]
193 193  
194 194  
195 -== 1.8  Example: How to join helium ==
322 +[[image:image-20220602104251-10.png]]
196 196  
197 197  
198 -(% style="color:blue" %)**1.  Create a new device.**
325 +[[image:image-20220602104402-11.png]]
199 199  
200 200  
201 -[[image:image-20220907165500-1.png||height="464" width="940"]]
202 202  
329 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
330 +(% style="color:blue" %)**4. Click to start the download**
203 203  
332 +[[image:image-20220602104923-13.png]]
204 204  
205 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
206 206  
207 207  
208 -[[image:image-20220907165837-2.png||height="375" width="809"]]
336 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
337 +(% style="color:blue" %)**5. Check update process**
209 209  
210 210  
340 +[[image:image-20220602104948-14.png]]
211 211  
212 -(% style="color:blue" %)**3.  Use AT commands.**
213 213  
214 214  
215 -[[image:image-20220602100052-2.png||height="385" width="600"]]
344 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
345 +(% style="color:blue" %)**The following picture shows that the burning is successful**
216 216  
347 +[[image:image-20220602105251-15.png]]
217 217  
218 218  
219 -(% style="color:#0000ff" %)**4.  Use command AT+CFG to get device configuration**
220 220  
351 += 3.  LA66 USB LoRaWAN Adapter =
221 221  
222 -[[image:image-20220907170308-3.png||height="556" width="617"]]
223 223  
354 +== 3.1  Overview ==
224 224  
225 225  
226 -(% style="color:blue" %)**5.  Network successfully.**
357 +[[image:image-20220715001142-3.png||height="145" width="220"]]
227 227  
228 228  
229 -[[image:image-20220907170436-4.png]]
360 +(((
361 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
362 +)))
230 230  
364 +(((
365 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
366 +)))
231 231  
368 +(((
369 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
370 +)))
232 232  
233 -(% style="color:blue" %)**6.  Send uplink using command**
372 +(((
373 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
374 +)))
234 234  
376 +(((
377 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
378 +)))
235 235  
236 -[[image:image-20220912084334-1.png]]
237 237  
238 238  
239 -[[image:image-20220912084412-3.png]]
382 +== 3.2  Features ==
240 240  
384 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
385 +* Ultra-long RF range
386 +* Support LoRaWAN v1.0.4 protocol
387 +* Support peer-to-peer protocol
388 +* TCXO crystal to ensure RF performance on low temperature
389 +* Spring RF antenna
390 +* Available in different frequency LoRaWAN frequency bands.
391 +* World-wide unique OTAA keys.
392 +* AT Command via UART-TTL interface
393 +* Firmware upgradable via UART interface
394 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
241 241  
396 +== 3.3  Specification ==
242 242  
243 -[[image:image-20220907170744-6.png||height="242" width="798"]]
398 +* CPU: 32-bit 48 MHz
399 +* Flash: 256KB
400 +* RAM: 64KB
401 +* Input Power Range: 5v
402 +* Frequency Range: 150 MHz ~~ 960 MHz
403 +* Maximum Power +22 dBm constant RF output
404 +* High sensitivity: -148 dBm
405 +* Temperature:
406 +** Storage: -55 ~~ +125℃
407 +** Operating: -40 ~~ +85℃
408 +* Humidity:
409 +** Storage: 5 ~~ 95% (Non-Condensing)
410 +** Operating: 10 ~~ 95% (Non-Condensing)
411 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
412 +* LoRa Rx current: <9 mA
244 244  
414 +== 3.4  Pin Mapping & LED ==
245 245  
246 -== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
247 247  
248 -=== 1.9.1  Items needed for update ===
249 249  
418 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
250 250  
251 -1. LA66 LoRaWAN Shield
252 -1. Arduino
253 -1. USB TO TTL Adapter
254 254  
255 -[[image:image-20220602100052-2.png||height="385" width="600"]]
421 +(((
422 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
423 +)))
256 256  
257 257  
258 -=== 1.9.2  Connection ===
426 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
259 259  
260 260  
261 -[[image:image-20220602101311-3.png||height="276" width="600"]]
429 +[[image:image-20220723100027-1.png]]
262 262  
263 263  
264 -(((
265 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
266 -)))
432 +Open the serial port tool
267 267  
268 -(((
269 -(% style="background-color:yellow" %)**GND  <-> GND
270 -TXD  <->  TXD
271 -RXD  <->  RXD**
272 -)))
434 +[[image:image-20220602161617-8.png]]
273 273  
436 +[[image:image-20220602161718-9.png||height="457" width="800"]]
274 274  
275 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
276 276  
277 -Connect USB TTL Adapter to PC after connecting the wires
278 278  
440 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
279 279  
280 -[[image:image-20220602102240-4.png||height="304" width="600"]]
442 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
281 281  
282 282  
283 -=== 1.9.3  Upgrade steps ===
445 +[[image:image-20220602161935-10.png||height="498" width="800"]]
284 284  
285 285  
286 -==== (% style="color:blue" %)**1.  Switch SW1 to put in ISP position**(%%) ====
287 287  
449 +(% style="color:blue" %)**3. See Uplink Command**
288 288  
289 -[[image:image-20220602102824-5.png||height="306" width="600"]]
451 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
290 290  
453 +example: AT+SENDB=01,02,8,05820802581ea0a5
291 291  
455 +[[image:image-20220602162157-11.png||height="497" width="800"]]
292 292  
293 -==== (% style="color:blue" %)**2.  Press the RST switch once**(%%) ====
294 294  
295 295  
296 -[[image:image-20220817085447-1.png]]
459 +(% style="color:blue" %)**4. Check to see if TTN received the message**
297 297  
461 +[[image:image-20220602162331-12.png||height="420" width="800"]]
298 298  
299 299  
300 -==== (% style="color:blue" %)**3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade**(%%) ====
301 301  
465 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
302 302  
303 -(((
304 -(% style="color:blue" %)**1.  Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
305 -)))
306 306  
468 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
307 307  
308 -[[image:image-20220602103227-6.png]]
470 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
309 309  
472 +(% style="color:red" %)**Preconditions:**
310 310  
311 -[[image:image-20220602103357-7.png]]
474 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
312 312  
476 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
313 313  
314 314  
315 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
316 -(% style="color:blue" %)**2.  Select the COM port corresponding to USB TTL**
317 317  
480 +(% style="color:blue" %)**Steps for usage:**
318 318  
319 -[[image:image-20220602103844-8.png]]
482 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
320 320  
484 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
321 321  
486 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
322 322  
323 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
324 -(% style="color:blue" %)**3.  Select the bin file to burn**
325 325  
326 326  
327 -[[image:image-20220602104144-9.png]]
490 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
328 328  
329 329  
330 -[[image:image-20220602104251-10.png]]
493 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
331 331  
332 332  
333 -[[image:image-20220602104402-11.png]]
496 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
334 334  
498 +[[image:image-20220723100439-2.png]]
335 335  
336 336  
337 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
338 -(% style="color:blue" %)**4.  Click to start the download**
339 339  
502 +(% style="color:blue" %)**2. Install Minicom in RPi.**
340 340  
341 -[[image:image-20220602104923-13.png]]
504 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
342 342  
506 + (% style="background-color:yellow" %)**apt update**
343 343  
508 + (% style="background-color:yellow" %)**apt install minicom**
344 344  
345 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
346 -(% style="color:blue" %)**5.  Check update process**
347 347  
511 +Use minicom to connect to the RPI's terminal
348 348  
349 -[[image:image-20220602104948-14.png]]
513 +[[image:image-20220602153146-3.png||height="439" width="500"]]
350 350  
351 351  
352 352  
353 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
354 -(% style="color:blue" %)**The following picture shows that the burning is successful**
517 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
355 355  
519 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
356 356  
357 -[[image:image-20220602105251-15.png]]
358 358  
522 +[[image:image-20220602154928-5.png||height="436" width="500"]]
359 359  
360 -= 2.  FAQ =
361 361  
362 -== 2.1  How to Compile Source Code for LA66? ==
363 363  
526 +(% style="color:blue" %)**4. Send Uplink message**
364 364  
365 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
528 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
366 366  
530 +example: AT+SENDB=01,02,8,05820802581ea0a5
367 367  
368 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
369 369  
533 +[[image:image-20220602160339-6.png||height="517" width="600"]]
370 370  
371 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:.Instruction for LA66 Peer to Peer firmware.WebHome]]
372 372  
373 373  
374 -= 3.  Order Info =
537 +Check to see if TTN received the message
375 375  
539 +[[image:image-20220602160627-7.png||height="369" width="800"]]
376 376  
377 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
378 378  
379 -(% style="color:blue" %)**XXX**(%%): The default frequency band
380 380  
381 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
382 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
383 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
384 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
385 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
386 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
387 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
388 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
389 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
543 +== 3.8  Example: Use of LA66 USB LoRaWAN Module and DRAGINO-LA66-APP. ==
390 390  
545 +=== 3.8.1 DRAGINO-LA66-APP ===
391 391  
547 +[[image:image-20220723102027-3.png]]
392 392  
393 -= 4.  Reference =
549 +==== Overview： ====
394 394  
551 +DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Module. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Module.
395 395  
396 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
553 +View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
397 397  
555 +==== Conditions of Use： ====
398 398  
557 +Requires a type-c to USB adapter
399 399  
400 -= 5.  FCC Statement =
559 +[[image:image-20220723104754-4.png]]
401 401  
561 +==== Use of APP: ====
402 402  
403 -(% style="color:red" %)**FCC Caution:**
563 +Function and page introduction
404 404  
405 -Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
565 +[[image:image-20220723113448-7.png||height="1481" width="670"]]
406 406  
407 -This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
567 +1.Display LA66 USB LoRaWAN Module connection status
408 408  
569 +2.Check and reconnect
409 409  
410 -(% style="color:red" %)**IMPORTANT NOTE: **
571 +3.Turn send timestamps on or off
411 411  
412 -(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
573 +4.Display LoRaWan connection status
413 413  
414 -—Reorient or relocate the receiving antenna.
575 +5.Check LoRaWan connection status
415 415  
416 -—Increase the separation between the equipment and receiver.
577 +6.The RSSI value of the node when the ACK is received
417 417  
418 -—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
579 +7.Node's Signal Strength Icon
419 419  
420 -—Consult the dealer or an experienced radio/TV technician for help.
581 +8.Set the packet sending interval of the node in seconds
421 421  
583 +9.AT command input box
422 422  
423 -(% style="color:red" %)**FCC Radiation Exposure Statement: **
585 +10.Send AT command button
424 424  
425 -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. 
587 +11.Node log box
426 426  
427 -
589 +12.clear log button
590 +
591 +13.exit button
592 +
593 +LA66 USB LoRaWAN Module not connected
594 +
595 +[[image:image-20220723110520-5.png||height="903" width="677"]]
596 +
597 +Connect LA66 USB LoRaWAN Module
598 +
599 +[[image:image-20220723110626-6.png||height="906" width="680"]]
600 +
601 +=== 3.8.2 Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Module and integrate it into Node-RED ===
602 +
603 +1.Register LA66 USB LoRaWAN Module to TTNV3
604 +
605 +[[image:image-20220723134549-8.png]]
606 +
607 +2.Open Node-RED,And import the JSON file to generate the flow
608 +
609 +Sample JSON file please go to this link to download：放置JSON文件的链接
610 +
611 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
612 +
613 +The following is the positioning effect map
614 +
615 +[[image:image-20220723144339-1.png]]
616 +
617 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
618 +
619 +The LA66 USB LoRaWAN Module is the same as the LA66 LoRaWAN Shield update method
620 +
621 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
622 +
623 +[[image:image-20220723150132-2.png]]
624 +
625 +
626 += 4.  Order Info =
627 +
628 +
629 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
630 +
631 +
632 +(% style="color:blue" %)**XXX**(%%): The default frequency band
633 +
634 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
635 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
636 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
637 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
638 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
639 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
640 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
641 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
642 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
643 +
644 += 5.  Reference =
645 +
646 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content
image-20220912084334-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912084352-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
image-20220912084412-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0