Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 166.3 >
edited by Xiaoling
on 2023/05/26 13:55
To version < 134.2 >
edited by Xiaoling
on 2022/07/26 10:28
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -6,14 +6,114 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 11  
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
15 +(((
16 +(((
17 +[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 +)))
15 15  
16 16  (((
21 +
22 +)))
23 +
24 +(((
25 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 +)))
27 +)))
28 +
29 +(((
30 +(((
31 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 +)))
33 +)))
34 +
35 +(((
36 +(((
37 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 +)))
39 +
40 +(((
41 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 +)))
43 +)))
44 +
45 +(((
46 +(((
47 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 +)))
49 +)))
50 +
51 +
52 +
53 +== 1.2  Features ==
54 +
55 +* Support LoRaWAN v1.0.4 protocol
56 +* Support peer-to-peer protocol
57 +* TCXO crystal to ensure RF performance on low temperature
58 +* SMD Antenna pad and i-pex antenna connector
59 +* Available in different frequency LoRaWAN frequency bands.
60 +* World-wide unique OTAA keys.
61 +* AT Command via UART-TTL interface
62 +* Firmware upgradable via UART interface
63 +* Ultra-long RF range
64 +
65 +== 1.3  Specification ==
66 +
67 +* CPU: 32-bit 48 MHz
68 +* Flash: 256KB
69 +* RAM: 64KB
70 +* Input Power Range: 1.8v ~~ 3.7v
71 +* Power Consumption: < 4uA.
72 +* Frequency Range: 150 MHz ~~ 960 MHz
73 +* Maximum Power +22 dBm constant RF output
74 +* High sensitivity: -148 dBm
75 +* Temperature:
76 +** Storage: -55 ~~ +125℃
77 +** Operating: -40 ~~ +85℃
78 +* Humidity:
79 +** Storage: 5 ~~ 95% (Non-Condensing)
80 +** Operating: 10 ~~ 95% (Non-Condensing)
81 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
82 +* LoRa Rx current: <9 mA
83 +* I/O Voltage: 3.3v
84 +
85 +== 1.4  AT Command ==
86 +
87 +
88 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
89 +
90 +
91 +
92 +== 1.5  Dimension ==
93 +
94 +[[image:image-20220718094750-3.png]]
95 +
96 +
97 +
98 +== 1.6  Pin Mapping ==
99 +
100 +[[image:image-20220720111850-1.png]]
101 +
102 +
103 +
104 +== 1.7  Land Pattern ==
105 +
106 +[[image:image-20220517072821-2.png]]
107 +
108 +
109 +
110 += 2.  LA66 LoRaWAN Shield =
111 +
112 +
113 +== 2.1  Overview ==
114 +
115 +
116 +(((
17 17  [[image:image-20220715000826-2.png||height="145" width="220"]]
18 18  )))
19 19  
... ... @@ -51,11 +51,10 @@
51 51  
52 52  
53 53  
54 -== 1.2  Features ==
154 +== 2.2  Features ==
55 55  
56 -
57 57  * Arduino Shield base on LA66 LoRaWAN module
58 -* Support LoRaWAN v1.0.3 protocol
157 +* Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 61  * SMA connector
... ... @@ -65,10 +65,8 @@
65 65  * Firmware upgradable via UART interface
66 66  * Ultra-long RF range
67 67  
167 +== 2.3  Specification ==
68 68  
69 -== 1.3  Specification ==
70 -
71 -
72 72  * CPU: 32-bit 48 MHz
73 73  * Flash: 256KB
74 74  * RAM: 64KB
... ... @@ -87,351 +87,511 @@
87 87  * LoRa Rx current: <9 mA
88 88  * I/O Voltage: 3.3v
89 89  
187 +== 2.4  LED ==
90 90  
91 -== 1.4  Pin Mapping & LED ==
189 +~1. The LED lights up red when there is an upstream data packet
190 +2. When the network is successfully connected, the green light will be on for 5 seconds
191 +3. Purple light on when receiving downlink data packets
92 92  
93 93  
94 -[[image:image-20220817085048-1.png||height="533" width="734"]]
194 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
95 95  
196 +Show connection diagram：
96 96  
198 +[[image:image-20220723170210-2.png||height="908" width="681"]]
97 97  
98 -~1. The LED lights up red when there is an upstream data packet
99 -2. When the network is successfully connected, the green light will be on for 5 seconds
100 -3. Purple light on when receiving downlink data packets
200 +1.open Arduino IDE
101 101  
202 +[[image:image-20220723170545-4.png]]
102 102  
103 -[[image:image-20220820112305-1.png||height="515" width="749"]]
204 +2.Open project
104 104  
206 +[[image:image-20220723170750-5.png||height="533" width="930"]]
105 105  
208 +3.Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload
106 106  
107 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
210 +[[image:image-20220723171228-6.png]]
108 108  
212 +4.After the upload is successful, open the serial port monitoring and send the AT command
109 109  
110 -**Show connection diagram：**
214 +[[image:image-20220723172235-7.png||height="480" width="1027"]]
111 111  
216 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
112 112  
113 -[[image:image-20220723170210-2.png||height="908" width="681"]]
218 +1.Open project
114 114  
220 +[[image:image-20220723172502-8.png]]
115 115  
222 +2.Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets
116 116  
117 -(% style="color:blue" %)**1.  open Arduino IDE**
224 +[[image:image-20220723172938-9.png||height="652" width="1050"]]
118 118  
119 119  
120 -[[image:image-20220723170545-4.png]]
121 121  
228 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
122 122  
123 123  
124 -(% style="color:blue" %)**2.  Open project**
231 +**1.  Open project**
125 125  
126 126  
127 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
234 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
128 128  
129 -[[image:image-20220726135239-1.png]]
130 130  
237 +[[image:image-20220723173341-10.png||height="581" width="1014"]]
131 131  
132 132  
133 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
134 134  
241 +**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
135 135  
136 -[[image:image-20220726135356-2.png]]
137 137  
244 +[[image:image-20220723173950-11.png||height="665" width="1012"]]
138 138  
139 139  
140 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
141 141  
248 +**3.  Integration into Node-red via TTNV3**
142 142  
143 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
250 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
144 144  
252 +[[image:image-20220723175700-12.png||height="602" width="995"]]
145 145  
146 146  
147 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
148 148  
256 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
149 149  
150 -(% style="color:blue" %)**1.  Open project**
151 151  
259 +=== 2.8.1  Items needed for update ===
152 152  
153 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
154 154  
262 +1. LA66 LoRaWAN Shield
263 +1. Arduino
264 +1. USB TO TTL Adapter
155 155  
156 -[[image:image-20220723172502-8.png]]
266 +[[image:image-20220602100052-2.png||height="385" width="600"]]
157 157  
158 158  
269 +=== 2.8.2  Connection ===
159 159  
160 -(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
161 161  
272 +[[image:image-20220602101311-3.png||height="276" width="600"]]
162 162  
163 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
164 164  
275 +(((
276 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
277 +)))
165 165  
279 +(((
280 +(% style="background-color:yellow" %)**GND  <-> GND
281 +TXD  <->  TXD
282 +RXD  <->  RXD**
283 +)))
166 166  
167 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
168 168  
286 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
169 169  
170 -(% style="color:blue" %)**1.  Open project**
288 +Connect USB TTL Adapter to PC after connecting the wires
171 171  
172 172  
173 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0>>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
291 +[[image:image-20220602102240-4.png||height="304" width="600"]]
174 174  
175 175  
176 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
294 +=== 2.8.3  Upgrade steps ===
177 177  
178 178  
297 +==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
179 179  
180 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
181 181  
300 +[[image:image-20220602102824-5.png||height="306" width="600"]]
182 182  
183 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
184 184  
185 185  
304 +==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
186 186  
187 187  
307 +[[image:image-20220602104701-12.png||height="285" width="600"]]
188 188  
189 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
190 190  
191 191  
192 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
311 +==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
193 193  
194 194  
195 -[[image:image-20220723175700-12.png||height="602" width="995"]]
314 +(((
315 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
316 +)))
196 196  
197 197  
319 +[[image:image-20220602103227-6.png]]
198 198  
199 -== 1.8  Example: How to join helium ==
200 200  
322 +[[image:image-20220602103357-7.png]]
201 201  
202 -(% style="color:blue" %)**1.  Create a new device.**
203 203  
204 204  
205 -[[image:image-20220907165500-1.png||height="464" width="940"]]
326 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
327 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
206 206  
207 207  
330 +[[image:image-20220602103844-8.png]]
208 208  
209 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
210 210  
211 211  
212 -[[image:image-20220907165837-2.png||height="375" width="809"]]
334 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
335 +(% style="color:blue" %)**3. Select the bin file to burn**
213 213  
214 214  
338 +[[image:image-20220602104144-9.png]]
215 215  
216 -(% style="color:blue" %)**3.  Use AT commands.**
217 217  
341 +[[image:image-20220602104251-10.png]]
218 218  
219 -[[image:image-20220602100052-2.png||height="385" width="600"]]
220 220  
344 +[[image:image-20220602104402-11.png]]
221 221  
222 222  
223 -(% style="color:#0000ff" %)**4.  Use command AT+CFG to get device configuration**
224 224  
348 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
349 +(% style="color:blue" %)**4. Click to start the download**
225 225  
226 -[[image:image-20220907170308-3.png||height="556" width="617"]]
351 +[[image:image-20220602104923-13.png]]
227 227  
228 228  
229 229  
230 -(% style="color:blue" %)**5.  Network successfully.**
355 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
356 +(% style="color:blue" %)**5. Check update process**
231 231  
232 232  
233 -[[image:image-20220907170436-4.png]]
359 +[[image:image-20220602104948-14.png]]
234 234  
235 235  
236 236  
237 -(% style="color:blue" %)**6.  Send uplink using command**
363 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
364 +(% style="color:blue" %)**The following picture shows that the burning is successful**
238 238  
366 +[[image:image-20220602105251-15.png]]
239 239  
240 -[[image:image-20220912084334-1.png]]
241 241  
242 242  
243 -[[image:image-20220912084412-3.png]]
370 += 3.  LA66 USB LoRaWAN Adapter =
244 244  
245 245  
373 +== 3.1  Overview ==
246 246  
247 -[[image:image-20220907170744-6.png||height="242" width="798"]]
248 248  
376 +[[image:image-20220715001142-3.png||height="145" width="220"]]
249 249  
250 250  
251 -== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
379 +(((
380 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
381 +)))
252 252  
383 +(((
384 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
385 +)))
253 253  
254 -=== 1.9.1  Items needed for update ===
387 +(((
388 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
389 +)))
255 255  
391 +(((
392 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
393 +)))
256 256  
257 -1. LA66 LoRaWAN Shield
258 -1. Arduino
259 -1. USB TO TTL Adapter
395 +(((
396 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
397 +)))
260 260  
261 -[[image:image-20220602100052-2.png||height="385" width="600"]]
262 262  
263 263  
401 +== 3.2  Features ==
264 264  
265 -=== 1.9.2  Connection ===
403 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
404 +* Ultra-long RF range
405 +* Support LoRaWAN v1.0.4 protocol
406 +* Support peer-to-peer protocol
407 +* TCXO crystal to ensure RF performance on low temperature
408 +* Spring RF antenna
409 +* Available in different frequency LoRaWAN frequency bands.
410 +* World-wide unique OTAA keys.
411 +* AT Command via UART-TTL interface
412 +* Firmware upgradable via UART interface
413 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
266 266  
267 267  
268 -[[image:image-20220602101311-3.png||height="276" width="600"]]
269 269  
417 +== 3.3  Specification ==
270 270  
271 -(((
272 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
273 -)))
419 +* CPU: 32-bit 48 MHz
420 +* Flash: 256KB
421 +* RAM: 64KB
422 +* Input Power Range: 5v
423 +* Frequency Range: 150 MHz ~~ 960 MHz
424 +* Maximum Power +22 dBm constant RF output
425 +* High sensitivity: -148 dBm
426 +* Temperature:
427 +** Storage: -55 ~~ +125℃
428 +** Operating: -40 ~~ +85℃
429 +* Humidity:
430 +** Storage: 5 ~~ 95% (Non-Condensing)
431 +** Operating: 10 ~~ 95% (Non-Condensing)
432 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
433 +* LoRa Rx current: <9 mA
274 274  
435 +
436 +
437 +== 3.4  Pin Mapping & LED ==
438 +
439 +
440 +
441 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
442 +
443 +
275 275  (((
276 -(% style="background-color:yellow" %)**GND  <-> GND
277 -TXD  <->  TXD
278 -RXD  <->  RXD**
445 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
279 279  )))
280 280  
281 281  
282 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
449 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
283 283  
284 -Connect USB TTL Adapter to PC after connecting the wires
285 285  
452 +[[image:image-20220723100027-1.png]]
286 286  
287 -[[image:image-20220602102240-4.png||height="304" width="600"]]
288 288  
455 +Open the serial port tool
289 289  
457 +[[image:image-20220602161617-8.png]]
290 290  
291 -=== 1.9.3  Upgrade steps ===
459 +[[image:image-20220602161718-9.png||height="457" width="800"]]
292 292  
293 293  
294 294  
295 -==== (% style="color:blue" %)**1.  Switch SW1 to put in ISP position**(%%) ====
463 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
296 296  
465 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
297 297  
298 -[[image:image-20220602102824-5.png||height="306" width="600"]]
299 299  
468 +[[image:image-20220602161935-10.png||height="498" width="800"]]
300 300  
301 301  
302 302  
303 -==== (% style="color:blue" %)**2.  Press the RST switch once**(%%) ====
472 +(% style="color:blue" %)**3. See Uplink Command**
304 304  
474 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
305 305  
306 -[[image:image-20220817085447-1.png]]
476 +example: AT+SENDB=01,02,8,05820802581ea0a5
307 307  
478 +[[image:image-20220602162157-11.png||height="497" width="800"]]
308 308  
309 309  
310 310  
311 -==== (% style="color:blue" %)**3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade**(%%) ====
482 +(% style="color:blue" %)**4. Check to see if TTN received the message**
312 312  
484 +[[image:image-20220602162331-12.png||height="420" width="800"]]
313 313  
314 314  
315 -(((
316 -(% style="color:blue" %)**1.  Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
317 -)))
318 318  
488 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
319 319  
320 -[[image:image-20220602103227-6.png]]
321 321  
491 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
322 322  
323 -[[image:image-20220602103357-7.png]]
493 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
324 324  
495 +(% style="color:red" %)**Preconditions:**
325 325  
497 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
326 326  
327 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
328 -(% style="color:blue" %)**2.  Select the COM port corresponding to USB TTL**
499 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
329 329  
330 330  
331 -[[image:image-20220602103844-8.png]]
332 332  
503 +(% style="color:blue" %)**Steps for usage:**
333 333  
505 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
334 334  
335 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
336 -(% style="color:blue" %)**3.  Select the bin file to burn**
507 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
337 337  
509 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
338 338  
339 -[[image:image-20220602104144-9.png]]
340 340  
341 341  
342 -[[image:image-20220602104251-10.png]]
513 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
343 343  
344 344  
345 -[[image:image-20220602104402-11.png]]
516 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
346 346  
347 347  
519 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
348 348  
349 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
350 -(% style="color:blue" %)**4.  Click to start the download**
521 +[[image:image-20220723100439-2.png]]
351 351  
352 352  
353 -[[image:image-20220602104923-13.png]]
354 354  
525 +(% style="color:blue" %)**2. Install Minicom in RPi.**
355 355  
527 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
356 356  
357 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
358 -(% style="color:blue" %)**5.  Check update process**
529 + (% style="background-color:yellow" %)**apt update**
359 359  
531 + (% style="background-color:yellow" %)**apt install minicom**
360 360  
361 -[[image:image-20220602104948-14.png]]
362 362  
534 +Use minicom to connect to the RPI's terminal
363 363  
536 +[[image:image-20220602153146-3.png||height="439" width="500"]]
364 364  
365 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
366 -(% style="color:blue" %)**The following picture shows that the burning is successful**
367 367  
368 368  
369 -[[image:image-20220602105251-15.png]]
540 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
370 370  
542 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
371 371  
372 372  
373 -= 2.  FAQ =
545 +[[image:image-20220602154928-5.png||height="436" width="500"]]
374 374  
375 -== 2.1  How to Compile Source Code for LA66? ==
376 376  
377 377  
378 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
549 +(% style="color:blue" %)**4. Send Uplink message**
379 379  
551 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
380 380  
553 +example: AT+SENDB=01,02,8,05820802581ea0a5
381 381  
382 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
383 383  
556 +[[image:image-20220602160339-6.png||height="517" width="600"]]
384 384  
385 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:.Instruction for LA66 Peer to Peer firmware.WebHome]]
386 386  
387 -= 3.  Order Info =
388 388  
560 +Check to see if TTN received the message
389 389  
390 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
562 +[[image:image-20220602160627-7.png||height="369" width="800"]]
391 391  
392 392  
393 -(% style="color:blue" %)**XXX**(%%): The default frequency band
394 394  
395 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
396 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
397 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
398 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
399 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
400 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
401 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
402 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
403 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
566 +== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and APP sample process and DRAGINO-LA66-APP. ==
404 404  
405 405  
406 -= 4.  Reference =
569 +=== 3.8.1 DRAGINO-LA66-APP ===
407 407  
408 408  
409 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
572 +[[image:image-20220723102027-3.png]]
410 410  
411 411  
412 -= 5.  FCC Statement =
413 413  
576 +==== (% style="color:blue" %)**Overview：**(%%) ====
414 414  
415 -(% style="color:red" %)**FCC Caution:**
416 416  
417 -Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
579 +DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Adapter and APP sample process. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Adapter.
418 418  
419 -This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
581 +View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
420 420  
421 421  
422 -(% style="color:red" %)**IMPORTANT NOTE: **
423 423  
424 -(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
585 +==== (% style="color:blue" %)**Conditions of Use：**(%%) ====
425 425  
426 -—Reorient or relocate the receiving antenna.
427 427  
428 -—Increase the separation between the equipment and receiver.
588 +Requires a type-c to USB adapter
429 429  
430 -—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
590 +[[image:image-20220723104754-4.png]]
431 431  
432 -—Consult the dealer or an experienced radio/TV technician for help.
433 433  
434 434  
435 -(% style="color:red" %)**FCC Radiation Exposure Statement: **
594 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
436 436  
437 -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. 
596 +
597 +Function and page introduction
598 +
599 +[[image:image-20220723113448-7.png||height="1481" width="670"]]
600 +
601 +1.Display LA66 USB LoRaWAN Module connection status
602 +
603 +2.Check and reconnect
604 +
605 +3.Turn send timestamps on or off
606 +
607 +4.Display LoRaWan connection status
608 +
609 +5.Check LoRaWan connection status
610 +
611 +6.The RSSI value of the node when the ACK is received
612 +
613 +7.Node's Signal Strength Icon
614 +
615 +8.Set the packet sending interval of the node in seconds
616 +
617 +9.AT command input box
618 +
619 +10.Send AT command button
620 +
621 +11.Node log box
622 +
623 +12.clear log button
624 +
625 +13.exit button
626 +
627 +
628 +LA66 USB LoRaWAN Module not connected
629 +
630 +[[image:image-20220723110520-5.png||height="903" width="677"]]
631 +
632 +
633 +
634 +Connect LA66 USB LoRaWAN Module
635 +
636 +[[image:image-20220723110626-6.png||height="906" width="680"]]
637 +
638 +
639 +
640 +=== 3.8.2 Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Adapter and integrate it into Node-RED ===
641 +
642 +
643 +**1.  Register LA66 USB LoRaWAN Module to TTNV3**
644 +
645 +[[image:image-20220723134549-8.png]]
646 +
647 +
648 +
649 +**2.  Open Node-RED,And import the JSON file to generate the flow**
650 +
651 +Sample JSON file please go to this link to download：放置JSON文件的链接
652 +
653 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
654 +
655 +The following is the positioning effect map
656 +
657 +[[image:image-20220723144339-1.png]]
658 +
659 +
660 +
661 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
662 +
663 +
664 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
665 +
666 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
667 +
668 +[[image:image-20220723150132-2.png]]
669 +
670 +
671 +
672 += 4.  Order Info =
673 +
674 +
675 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
676 +
677 +
678 +(% style="color:blue" %)**XXX**(%%): The default frequency band
679 +
680 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
681 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
682 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
683 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
684 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
685 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
686 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
687 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
688 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
689 +
690 +
691 += 5.  Reference =
692 +
693 +
694 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content
image-20220912084334-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912084352-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
image-20220912084412-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0