Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 166.3 >
edited by Xiaoling
on 2023/05/26 13:55
To version < 101.4 >
edited by Xiaoling
on 2022/07/21 14:17
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -6,15 +6,15 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 11  
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
15 -
16 16  (((
17 -[[image:image-20220715000826-2.png||height="145" width="220"]]
16 +(((
17 +[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 18  )))
19 19  
20 20  (((
... ... @@ -22,12 +22,13 @@
22 22  )))
23 23  
24 24  (((
25 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
25 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 26  )))
27 +)))
27 27  
28 28  (((
29 29  (((
30 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 31  )))
32 32  )))
33 33  
... ... @@ -35,10 +35,8 @@
35 35  (((
36 36  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 37  )))
38 -)))
39 39  
40 40  (((
41 -(((
42 42  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 43  )))
44 44  )))
... ... @@ -53,12 +53,10 @@
53 53  
54 54  == 1.2  Features ==
55 55  
56 -
57 -* Arduino Shield base on LA66 LoRaWAN module
58 -* Support LoRaWAN v1.0.3 protocol
55 +* Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 -* SMA connector
58 +* SMD Antenna pad and i-pex antenna connector
62 62  * Available in different frequency LoRaWAN frequency bands.
63 63  * World-wide unique OTAA keys.
64 64  * AT Command via UART-TTL interface
... ... @@ -66,9 +66,9 @@
66 66  * Ultra-long RF range
67 67  
68 68  
66 +
69 69  == 1.3  Specification ==
70 70  
71 -
72 72  * CPU: 32-bit 48 MHz
73 73  * Flash: 256KB
74 74  * RAM: 64KB
... ... @@ -88,350 +88,464 @@
88 88  * I/O Voltage: 3.3v
89 89  
90 90  
91 -== 1.4  Pin Mapping & LED ==
92 92  
89 +== 1.4  AT Command ==
93 93  
94 -[[image:image-20220817085048-1.png||height="533" width="734"]]
95 95  
92 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
96 96  
97 97  
98 -~1. The LED lights up red when there is an upstream data packet
99 -2. When the network is successfully connected, the green light will be on for 5 seconds
100 -3. Purple light on when receiving downlink data packets
101 101  
96 +== 1.5  Dimension ==
102 102  
103 -[[image:image-20220820112305-1.png||height="515" width="749"]]
98 +[[image:image-20220718094750-3.png]]
104 104  
105 105  
106 106  
107 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
102 +== 1.6  Pin Mapping ==
108 108  
104 +[[image:image-20220720111850-1.png]]
109 109  
110 -**Show connection diagram：**
111 111  
112 112  
113 -[[image:image-20220723170210-2.png||height="908" width="681"]]
108 +== 1.7  Land Pattern ==
114 114  
110 +[[image:image-20220517072821-2.png]]
115 115  
116 116  
117 -(% style="color:blue" %)**1.  open Arduino IDE**
118 118  
114 += 2.  LA66 LoRaWAN Shield =
119 119  
120 -[[image:image-20220723170545-4.png]]
121 121  
117 +== 2.1  Overview ==
122 122  
123 123  
124 -(% style="color:blue" %)**2.  Open project**
120 +(((
121 +[[image:image-20220715000826-2.png||height="145" width="220"]]
122 +)))
125 125  
124 +(((
125 +
126 +)))
126 126  
127 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
128 +(((
129 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
130 +)))
128 128  
129 -[[image:image-20220726135239-1.png]]
132 +(((
133 +(((
134 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
135 +)))
136 +)))
130 130  
138 +(((
139 +(((
140 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
141 +)))
142 +)))
131 131  
144 +(((
145 +(((
146 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
147 +)))
148 +)))
132 132  
133 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
150 +(((
151 +(((
152 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
153 +)))
154 +)))
134 134  
135 135  
136 -[[image:image-20220726135356-2.png]]
137 137  
158 +== 2.2  Features ==
138 138  
160 +* Arduino Shield base on LA66 LoRaWAN module
161 +* Support LoRaWAN v1.0.4 protocol
162 +* Support peer-to-peer protocol
163 +* TCXO crystal to ensure RF performance on low temperature
164 +* SMA connector
165 +* Available in different frequency LoRaWAN frequency bands.
166 +* World-wide unique OTAA keys.
167 +* AT Command via UART-TTL interface
168 +* Firmware upgradable via UART interface
169 +* Ultra-long RF range
139 139  
140 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
141 141  
142 142  
143 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
173 +== 2.3  Specification ==
144 144  
175 +* CPU: 32-bit 48 MHz
176 +* Flash: 256KB
177 +* RAM: 64KB
178 +* Input Power Range: 1.8v ~~ 3.7v
179 +* Power Consumption: < 4uA.
180 +* Frequency Range: 150 MHz ~~ 960 MHz
181 +* Maximum Power +22 dBm constant RF output
182 +* High sensitivity: -148 dBm
183 +* Temperature:
184 +** Storage: -55 ~~ +125℃
185 +** Operating: -40 ~~ +85℃
186 +* Humidity:
187 +** Storage: 5 ~~ 95% (Non-Condensing)
188 +** Operating: 10 ~~ 95% (Non-Condensing)
189 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
190 +* LoRa Rx current: <9 mA
191 +* I/O Voltage: 3.3v
145 145  
146 146  
147 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
148 148  
195 +== 2.4  Pin Mapping & LED ==
149 149  
150 -(% style="color:blue" %)**1.  Open project**
151 151  
152 152  
153 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
199 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
154 154  
155 155  
156 -[[image:image-20220723172502-8.png]]
157 157  
203 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
158 158  
159 159  
160 -(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
161 161  
207 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
162 162  
163 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
164 164  
165 165  
211 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
166 166  
167 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
168 168  
214 +=== 2.8.1  Items needed for update ===
169 169  
170 -(% style="color:blue" %)**1.  Open project**
216 +1. LA66 LoRaWAN Shield
217 +1. Arduino
218 +1. USB TO TTL Adapter
171 171  
220 +[[image:image-20220602100052-2.png||height="385" width="600"]]
172 172  
173 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0>>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
174 174  
223 +=== 2.8.2  Connection ===
175 175  
176 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
177 177  
226 +[[image:image-20220602101311-3.png||height="276" width="600"]]
178 178  
179 179  
180 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
229 +(((
230 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
231 +)))
181 181  
233 +(((
234 +(% style="background-color:yellow" %)**GND  <-> GND
235 +TXD  <->  TXD
236 +RXD  <->  RXD**
237 +)))
182 182  
183 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
184 184  
240 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
185 185  
242 +Connect USB TTL Adapter to PC after connecting the wires
186 186  
187 187  
245 +[[image:image-20220602102240-4.png||height="304" width="600"]]
188 188  
189 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
190 190  
248 +=== 2.8.3  Upgrade steps ===
191 191  
192 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
193 193  
251 +==== 1.  Switch SW1 to put in ISP position ====
194 194  
195 -[[image:image-20220723175700-12.png||height="602" width="995"]]
196 196  
254 +[[image:image-20220602102824-5.png||height="306" width="600"]]
197 197  
198 198  
199 -== 1.8  Example: How to join helium ==
200 200  
258 +==== 2.  Press the RST switch once ====
201 201  
202 -(% style="color:blue" %)**1.  Create a new device.**
203 203  
261 +[[image:image-20220602104701-12.png||height="285" width="600"]]
204 204  
205 -[[image:image-20220907165500-1.png||height="464" width="940"]]
206 206  
207 207  
265 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
208 208  
209 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
210 210  
268 +(((
269 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
270 +)))
211 211  
212 -[[image:image-20220907165837-2.png||height="375" width="809"]]
213 213  
273 +[[image:image-20220602103227-6.png]]
214 214  
215 215  
216 -(% style="color:blue" %)**3.  Use AT commands.**
276 +[[image:image-20220602103357-7.png]]
217 217  
218 218  
219 -[[image:image-20220602100052-2.png||height="385" width="600"]]
220 220  
280 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
281 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
221 221  
222 222  
223 -(% style="color:#0000ff" %)**4.  Use command AT+CFG to get device configuration**
284 +[[image:image-20220602103844-8.png]]
224 224  
225 225  
226 -[[image:image-20220907170308-3.png||height="556" width="617"]]
227 227  
288 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
289 +(% style="color:blue" %)**3. Select the bin file to burn**
228 228  
229 229  
230 -(% style="color:blue" %)**5.  Network successfully.**
292 +[[image:image-20220602104144-9.png]]
231 231  
232 232  
233 -[[image:image-20220907170436-4.png]]
295 +[[image:image-20220602104251-10.png]]
234 234  
235 235  
298 +[[image:image-20220602104402-11.png]]
236 236  
237 -(% style="color:blue" %)**6.  Send uplink using command**
238 238  
239 239  
240 -[[image:image-20220912084334-1.png]]
302 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
303 +(% style="color:blue" %)**4. Click to start the download**
241 241  
305 +[[image:image-20220602104923-13.png]]
242 242  
243 -[[image:image-20220912084412-3.png]]
244 244  
245 245  
309 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
310 +(% style="color:blue" %)**5. Check update process**
246 246  
247 -[[image:image-20220907170744-6.png||height="242" width="798"]]
248 248  
313 +[[image:image-20220602104948-14.png]]
249 249  
250 250  
251 -== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
252 252  
317 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
318 +(% style="color:blue" %)**The following picture shows that the burning is successful**
253 253  
254 -=== 1.9.1  Items needed for update ===
320 +[[image:image-20220602105251-15.png]]
255 255  
256 256  
257 -1. LA66 LoRaWAN Shield
258 -1. Arduino
259 -1. USB TO TTL Adapter
260 260  
261 -[[image:image-20220602100052-2.png||height="385" width="600"]]
324 += 3.  LA66 USB LoRaWAN Adapter =
262 262  
263 263  
327 +== 3.1  Overview ==
264 264  
265 -=== 1.9.2  Connection ===
266 266  
330 +[[image:image-20220715001142-3.png||height="145" width="220"]]
267 267  
268 -[[image:image-20220602101311-3.png||height="276" width="600"]]
269 269  
333 +(((
334 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
335 +)))
270 270  
271 271  (((
272 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
338 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
273 273  )))
274 274  
275 275  (((
276 -(% style="background-color:yellow" %)**GND  <-> GND
277 -TXD  <->  TXD
278 -RXD  <->  RXD**
342 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
279 279  )))
280 280  
345 +(((
346 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
347 +)))
281 281  
282 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
349 +(((
350 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
351 +)))
283 283  
284 -Connect USB TTL Adapter to PC after connecting the wires
285 285  
286 286  
287 -[[image:image-20220602102240-4.png||height="304" width="600"]]
355 +== 3.2  Features ==
288 288  
357 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
358 +* Ultra-long RF range
359 +* Support LoRaWAN v1.0.4 protocol
360 +* Support peer-to-peer protocol
361 +* TCXO crystal to ensure RF performance on low temperature
362 +* Spring RF antenna
363 +* Available in different frequency LoRaWAN frequency bands.
364 +* World-wide unique OTAA keys.
365 +* AT Command via UART-TTL interface
366 +* Firmware upgradable via UART interface
367 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
289 289  
290 290  
291 -=== 1.9.3  Upgrade steps ===
292 292  
371 +== 3.3  Specification ==
293 293  
373 +* CPU: 32-bit 48 MHz
374 +* Flash: 256KB
375 +* RAM: 64KB
376 +* Input Power Range: 5v
377 +* Frequency Range: 150 MHz ~~ 960 MHz
378 +* Maximum Power +22 dBm constant RF output
379 +* High sensitivity: -148 dBm
380 +* Temperature:
381 +** Storage: -55 ~~ +125℃
382 +** Operating: -40 ~~ +85℃
383 +* Humidity:
384 +** Storage: 5 ~~ 95% (Non-Condensing)
385 +** Operating: 10 ~~ 95% (Non-Condensing)
386 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
387 +* LoRa Rx current: <9 mA
294 294  
295 -==== (% style="color:blue" %)**1.  Switch SW1 to put in ISP position**(%%) ====
296 296  
297 297  
298 -[[image:image-20220602102824-5.png||height="306" width="600"]]
391 +== 3.4  Pin Mapping & LED ==
299 299  
300 300  
301 301  
395 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
302 302  
303 -==== (% style="color:blue" %)**2.  Press the RST switch once**(%%) ====
304 304  
398 +(((
399 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
400 +)))
305 305  
306 -[[image:image-20220817085447-1.png]]
307 307  
403 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
308 308  
309 309  
406 +[[image:image-20220602171217-1.png||height="538" width="800"]]
310 310  
311 -==== (% style="color:blue" %)**3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade**(%%) ====
312 312  
409 +Open the serial port tool
313 313  
411 +[[image:image-20220602161617-8.png]]
314 314  
315 -(((
316 -(% style="color:blue" %)**1.  Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
317 -)))
413 +[[image:image-20220602161718-9.png||height="457" width="800"]]
318 318  
319 319  
320 -[[image:image-20220602103227-6.png]]
321 321  
417 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
322 322  
323 -[[image:image-20220602103357-7.png]]
419 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
324 324  
325 325  
422 +[[image:image-20220602161935-10.png||height="498" width="800"]]
326 326  
327 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
328 -(% style="color:blue" %)**2.  Select the COM port corresponding to USB TTL**
329 329  
330 330  
331 -[[image:image-20220602103844-8.png]]
426 +(% style="color:blue" %)**3. See Uplink Command**
332 332  
428 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
333 333  
430 +example: AT+SENDB=01,02,8,05820802581ea0a5
334 334  
335 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
336 -(% style="color:blue" %)**3.  Select the bin file to burn**
432 +[[image:image-20220602162157-11.png||height="497" width="800"]]
337 337  
338 338  
339 -[[image:image-20220602104144-9.png]]
340 340  
436 +(% style="color:blue" %)**4. Check to see if TTN received the message**
341 341  
342 -[[image:image-20220602104251-10.png]]
438 +[[image:image-20220602162331-12.png||height="420" width="800"]]
343 343  
344 344  
345 -[[image:image-20220602104402-11.png]]
346 346  
442 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
347 347  
348 348  
349 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
350 -(% style="color:blue" %)**4.  Click to start the download**
445 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
351 351  
352 352  
353 -[[image:image-20220602104923-13.png]]
448 +(% style="color:red" %)**Preconditions:**
354 354  
450 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
355 355  
452 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
356 356  
357 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
358 -(% style="color:blue" %)**5.  Check update process**
359 359  
360 360  
361 -[[image:image-20220602104948-14.png]]
456 +(% style="color:blue" %)**Steps for usage:**
362 362  
458 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
363 363  
460 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
364 364  
365 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
366 -(% style="color:blue" %)**The following picture shows that the burning is successful**
462 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
367 367  
368 368  
369 -[[image:image-20220602105251-15.png]]
370 370  
466 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
371 371  
372 372  
373 -= 2.  FAQ =
469 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
374 374  
375 -== 2.1  How to Compile Source Code for LA66? ==
376 376  
472 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
377 377  
378 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
474 +[[image:image-20220602171233-2.png||height="538" width="800"]]
379 379  
380 380  
381 381  
382 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
478 +(% style="color:blue" %)**2. Install Minicom in RPi.**
383 383  
480 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
384 384  
385 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:.Instruction for LA66 Peer to Peer firmware.WebHome]]
482 + (% style="background-color:yellow" %)**apt update**
386 386  
387 -= 3.  Order Info =
484 + (% style="background-color:yellow" %)**apt install minicom**
388 388  
389 389  
390 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
487 +Use minicom to connect to the RPI's terminal
391 391  
489 +[[image:image-20220602153146-3.png||height="439" width="500"]]
392 392  
393 -(% style="color:blue" %)**XXX**(%%): The default frequency band
394 394  
395 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
396 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
397 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
398 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
399 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
400 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
401 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
402 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
403 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
404 404  
493 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
405 405  
406 -= 4.  Reference =
495 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
407 407  
408 408  
409 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
498 +[[image:image-20220602154928-5.png||height="436" width="500"]]
410 410  
411 411  
412 -= 5.  FCC Statement =
413 413  
502 +(% style="color:blue" %)**4. Send Uplink message**
414 414  
415 -(% style="color:red" %)**FCC Caution:**
504 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
416 416  
417 -Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
506 +example: AT+SENDB=01,02,8,05820802581ea0a5
418 418  
419 -This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
420 420  
509 +[[image:image-20220602160339-6.png||height="517" width="600"]]
421 421  
422 -(% style="color:red" %)**IMPORTANT NOTE: **
423 423  
424 -(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
425 425  
426 -—Reorient or relocate the receiving antenna.
513 +Check to see if TTN received the message
427 427  
428 -—Increase the separation between the equipment and receiver.
515 +[[image:image-20220602160627-7.png||height="369" width="800"]]
429 429  
430 -—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
431 431  
432 -—Consult the dealer or an experienced radio/TV technician for help.
433 433  
519 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
434 434  
435 -(% style="color:red" %)**FCC Radiation Exposure Statement: **
436 436  
437 -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. 
522 +
523 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
524 +
525 +
526 +
527 +
528 += 4.  Order Info =
529 +
530 +
531 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
532 +
533 +
534 +(% style="color:blue" %)**XXX**(%%): The default frequency band
535 +
536 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
537 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
538 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
539 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
540 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
541 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
542 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
543 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
544 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
545 +
546 += 5.  Reference =
547 +
548 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content
image-20220912084334-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912084352-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
image-20220912084412-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0