Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 166.2 >
edited by Xiaoling
on 2022/11/14 11:41
To version < 144.1 >
edited by Edwin Chen
on 2022/08/14 09:41
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -6,14 +6,117 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 11  
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
15 +(((
16 +(((
17 +[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 +)))
15 15  
16 16  (((
21 +
22 +)))
23 +
24 +(((
25 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 +)))
27 +)))
28 +
29 +(((
30 +(((
31 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 +)))
33 +)))
34 +
35 +(((
36 +(((
37 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 +)))
39 +
40 +(((
41 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 +)))
43 +)))
44 +
45 +(((
46 +(((
47 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 +)))
49 +)))
50 +
51 +
52 +
53 +== 1.2  Features ==
54 +
55 +
56 +* Support LoRaWAN v1.0.4 protocol
57 +* Support peer-to-peer protocol
58 +* TCXO crystal to ensure RF performance on low temperature
59 +* SMD Antenna pad and i-pex antenna connector
60 +* Available in different frequency LoRaWAN frequency bands.
61 +* World-wide unique OTAA keys.
62 +* AT Command via UART-TTL interface
63 +* Firmware upgradable via UART interface
64 +* Ultra-long RF range
65 +
66 +== 1.3  Specification ==
67 +
68 +
69 +* CPU: 32-bit 48 MHz
70 +* Flash: 256KB
71 +* RAM: 64KB
72 +* Input Power Range: 1.8v ~~ 3.7v
73 +* Power Consumption: < 4uA.
74 +* Frequency Range: 150 MHz ~~ 960 MHz
75 +* Maximum Power +22 dBm constant RF output
76 +* High sensitivity: -148 dBm
77 +* Temperature:
78 +** Storage: -55 ~~ +125℃
79 +** Operating: -40 ~~ +85℃
80 +* Humidity:
81 +** Storage: 5 ~~ 95% (Non-Condensing)
82 +** Operating: 10 ~~ 95% (Non-Condensing)
83 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
84 +* LoRa Rx current: <9 mA
85 +* I/O Voltage: 3.3v
86 +
87 +== 1.4  AT Command ==
88 +
89 +
90 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
91 +
92 +
93 +
94 +== 1.5  Dimension ==
95 +
96 +[[image:image-20220718094750-3.png]]
97 +
98 +
99 +
100 +== 1.6  Pin Mapping ==
101 +
102 +[[image:image-20220720111850-1.png]]
103 +
104 +
105 +
106 +== 1.7  Land Pattern ==
107 +
108 +
109 +[[image:image-20220517072821-2.png]]
110 +
111 +
112 +
113 += 2.  LA66 LoRaWAN Shield =
114 +
115 +
116 +== 2.1  Overview ==
117 +
118 +
119 +(((
17 17  [[image:image-20220715000826-2.png||height="145" width="220"]]
18 18  )))
19 19  
... ... @@ -51,11 +51,11 @@
51 51  
52 52  
53 53  
54 -== 1.2  Features ==
157 +== 2.2  Features ==
55 55  
56 56  
57 57  * Arduino Shield base on LA66 LoRaWAN module
58 -* Support LoRaWAN v1.0.3 protocol
161 +* Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 61  * SMA connector
... ... @@ -65,11 +65,9 @@
65 65  * Firmware upgradable via UART interface
66 66  * Ultra-long RF range
67 67  
171 +== 2.3  Specification ==
68 68  
69 69  
70 -== 1.3  Specification ==
71 -
72 -
73 73  * CPU: 32-bit 48 MHz
74 74  * Flash: 256KB
75 75  * RAM: 64KB
... ... @@ -88,27 +88,18 @@
88 88  * LoRa Rx current: <9 mA
89 89  * I/O Voltage: 3.3v
90 90  
192 +== 2.4  Pin Mapping & LED ==
91 91  
92 92  
93 -== 1.4  Pin Mapping & LED ==
94 -
95 -
96 -[[image:image-20220817085048-1.png||height="533" width="734"]]
97 -
98 -
99 -
100 100  ~1. The LED lights up red when there is an upstream data packet
101 101  2. When the network is successfully connected, the green light will be on for 5 seconds
102 102  3. Purple light on when receiving downlink data packets
103 103  
104 104  
105 -[[image:image-20220820112305-1.png||height="515" width="749"]]
106 106  
201 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
107 107  
108 108  
109 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
110 -
111 -
112 112  **Show connection diagram：**
113 113  
114 114  
... ... @@ -126,19 +126,16 @@
126 126  (% style="color:blue" %)**2.  Open project**
127 127  
128 128  
129 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
221 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
130 130  
131 131  [[image:image-20220726135239-1.png]]
132 132  
133 133  
134 -
135 135  (% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
136 136  
137 -
138 138  [[image:image-20220726135356-2.png]]
139 139  
140 140  
141 -
142 142  (% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
143 143  
144 144  
... ... @@ -146,13 +146,13 @@
146 146  
147 147  
148 148  
149 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
238 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
150 150  
151 151  
152 152  (% style="color:blue" %)**1.  Open project**
153 153  
154 154  
155 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
244 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
156 156  
157 157  
158 158  [[image:image-20220723172502-8.png]]
... ... @@ -159,7 +159,7 @@
159 159  
160 160  
161 161  
162 -(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
251 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
163 163  
164 164  
165 165  [[image:image-20220723172938-9.png||height="652" width="1050"]]
... ... @@ -166,13 +166,13 @@
166 166  
167 167  
168 168  
169 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
258 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
170 170  
171 171  
172 172  (% style="color:blue" %)**1.  Open project**
173 173  
174 174  
175 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0>>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
264 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
176 176  
177 177  
178 178  [[image:image-20220723173341-10.png||height="581" width="1014"]]
... ... @@ -186,259 +186,471 @@
186 186  
187 187  
188 188  
278 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
189 189  
280 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
190 190  
191 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
282 +[[image:image-20220723175700-12.png||height="602" width="995"]]
192 192  
193 193  
194 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
195 195  
286 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
196 196  
197 -[[image:image-20220723175700-12.png||height="602" width="995"]]
198 198  
289 +=== 2.8.1  Items needed for update ===
199 199  
200 200  
201 -== 1.8  Example: How to join helium ==
292 +1. LA66 LoRaWAN Shield
293 +1. Arduino
294 +1. USB TO TTL Adapter
202 202  
296 +[[image:image-20220602100052-2.png||height="385" width="600"]]
203 203  
204 -(% style="color:blue" %)**1.  Create a new device.**
205 205  
206 206  
207 -[[image:image-20220907165500-1.png||height="464" width="940"]]
300 +=== 2.8.2  Connection ===
208 208  
209 209  
303 +[[image:image-20220602101311-3.png||height="276" width="600"]]
210 210  
211 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
212 212  
306 +(((
307 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
308 +)))
213 213  
214 -[[image:image-20220907165837-2.png||height="375" width="809"]]
310 +(((
311 +(% style="background-color:yellow" %)**GND  <-> GND
312 +TXD  <->  TXD
313 +RXD  <->  RXD**
314 +)))
215 215  
216 216  
317 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
217 217  
218 -(% style="color:blue" %)**3.  Use AT commands.**
319 +Connect USB TTL Adapter to PC after connecting the wires
219 219  
220 220  
221 -[[image:image-20220602100052-2.png||height="385" width="600"]]
322 +[[image:image-20220602102240-4.png||height="304" width="600"]]
222 222  
223 223  
224 224  
225 -(% style="color:#0000ff" %)**4.  Use command AT+CFG to get device configuration**
326 +=== 2.8.3  Upgrade steps ===
226 226  
227 227  
228 -[[image:image-20220907170308-3.png||height="556" width="617"]]
329 +==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
229 229  
230 230  
332 +[[image:image-20220602102824-5.png||height="306" width="600"]]
231 231  
232 -(% style="color:blue" %)**5.  Network successfully.**
233 233  
234 234  
235 -[[image:image-20220907170436-4.png]]
336 +==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
236 236  
237 237  
339 +[[image:image-20220602104701-12.png||height="285" width="600"]]
238 238  
239 -(% style="color:blue" %)**6.  Send uplink using command**
240 240  
241 241  
242 -[[image:image-20220912084334-1.png]]
343 +==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
243 243  
244 244  
245 -[[image:image-20220912084412-3.png]]
346 +(((
347 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
348 +)))
246 246  
247 247  
351 +[[image:image-20220602103227-6.png]]
248 248  
249 -[[image:image-20220907170744-6.png||height="242" width="798"]]
250 250  
354 +[[image:image-20220602103357-7.png]]
251 251  
252 252  
253 -== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
254 254  
358 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
359 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
255 255  
256 -=== 1.9.1  Items needed for update ===
257 257  
362 +[[image:image-20220602103844-8.png]]
258 258  
259 -1. LA66 LoRaWAN Shield
260 -1. Arduino
261 -1. USB TO TTL Adapter
262 262  
263 -[[image:image-20220602100052-2.png||height="385" width="600"]]
264 264  
366 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
367 +(% style="color:blue" %)**3. Select the bin file to burn**
265 265  
266 266  
267 -=== 1.9.2  Connection ===
370 +[[image:image-20220602104144-9.png]]
268 268  
269 269  
270 -[[image:image-20220602101311-3.png||height="276" width="600"]]
373 +[[image:image-20220602104251-10.png]]
271 271  
272 272  
376 +[[image:image-20220602104402-11.png]]
377 +
378 +
379 +
380 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
381 +(% style="color:blue" %)**4. Click to start the download**
382 +
383 +[[image:image-20220602104923-13.png]]
384 +
385 +
386 +
387 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
388 +(% style="color:blue" %)**5. Check update process**
389 +
390 +
391 +[[image:image-20220602104948-14.png]]
392 +
393 +
394 +
395 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
396 +(% style="color:blue" %)**The following picture shows that the burning is successful**
397 +
398 +[[image:image-20220602105251-15.png]]
399 +
400 +
401 +
402 += 3.  LA66 USB LoRaWAN Adapter =
403 +
404 +
405 +== 3.1  Overview ==
406 +
407 +
408 +[[image:image-20220715001142-3.png||height="145" width="220"]]
409 +
410 +
273 273  (((
274 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
412 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
275 275  )))
276 276  
277 277  (((
278 -(% style="background-color:yellow" %)**GND  <-> GND
279 -TXD  <->  TXD
280 -RXD  <->  RXD**
416 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
281 281  )))
282 282  
419 +(((
420 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
421 +)))
283 283  
284 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
423 +(((
424 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
425 +)))
285 285  
286 -Connect USB TTL Adapter to PC after connecting the wires
427 +(((
428 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
429 +)))
287 287  
288 288  
289 -[[image:image-20220602102240-4.png||height="304" width="600"]]
290 290  
433 +== 3.2  Features ==
291 291  
292 292  
293 -=== 1.9.3  Upgrade steps ===
436 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
437 +* Ultra-long RF range
438 +* Support LoRaWAN v1.0.4 protocol
439 +* Support peer-to-peer protocol
440 +* TCXO crystal to ensure RF performance on low temperature
441 +* Spring RF antenna
442 +* Available in different frequency LoRaWAN frequency bands.
443 +* World-wide unique OTAA keys.
444 +* AT Command via UART-TTL interface
445 +* Firmware upgradable via UART interface
446 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
294 294  
448 +== 3.3  Specification ==
295 295  
296 296  
297 -==== (% style="color:blue" %)**1.  Switch SW1 to put in ISP position**(%%) ====
451 +* CPU: 32-bit 48 MHz
452 +* Flash: 256KB
453 +* RAM: 64KB
454 +* Input Power Range: 5v
455 +* Frequency Range: 150 MHz ~~ 960 MHz
456 +* Maximum Power +22 dBm constant RF output
457 +* High sensitivity: -148 dBm
458 +* Temperature:
459 +** Storage: -55 ~~ +125℃
460 +** Operating: -40 ~~ +85℃
461 +* Humidity:
462 +** Storage: 5 ~~ 95% (Non-Condensing)
463 +** Operating: 10 ~~ 95% (Non-Condensing)
464 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
465 +* LoRa Rx current: <9 mA
298 298  
467 +== 3.4  Pin Mapping & LED ==
299 299  
300 -[[image:image-20220602102824-5.png||height="306" width="600"]]
469 +[[image:image-20220813183239-3.png||height="526" width="662"]]
301 301  
302 302  
472 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
303 303  
304 304  
305 -==== (% style="color:blue" %)**2.  Press the RST switch once**(%%) ====
475 +(((
476 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
477 +)))
306 306  
307 307  
308 -[[image:image-20220817085447-1.png]]
480 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
309 309  
310 310  
483 +[[image:image-20220723100027-1.png]]
311 311  
312 312  
313 -==== (% style="color:blue" %)**3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade**(%%) ====
486 +Open the serial port tool
314 314  
488 +[[image:image-20220602161617-8.png]]
315 315  
490 +[[image:image-20220602161718-9.png||height="457" width="800"]]
316 316  
492 +
493 +
494 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
495 +
496 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
497 +
498 +
499 +[[image:image-20220602161935-10.png||height="498" width="800"]]
500 +
501 +
502 +
503 +(% style="color:blue" %)**3. See Uplink Command**
504 +
505 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
506 +
507 +example: AT+SENDB=01,02,8,05820802581ea0a5
508 +
509 +[[image:image-20220602162157-11.png||height="497" width="800"]]
510 +
511 +
512 +
513 +(% style="color:blue" %)**4. Check to see if TTN received the message**
514 +
515 +[[image:image-20220602162331-12.png||height="420" width="800"]]
516 +
517 +
518 +
519 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
520 +
521 +
522 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
523 +
524 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
525 +
526 +(% style="color:red" %)**Preconditions:**
527 +
528 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
529 +
530 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
531 +
532 +
533 +
534 +(% style="color:blue" %)**Steps for usage:**
535 +
536 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
537 +
538 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
539 +
540 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
541 +
542 +
543 +
544 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
545 +
546 +
547 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
548 +
549 +
550 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
551 +
552 +[[image:image-20220723100439-2.png]]
553 +
554 +
555 +
556 +(% style="color:blue" %)**2. Install Minicom in RPi.**
557 +
558 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
559 +
560 + (% style="background-color:yellow" %)**apt update**
561 +
562 + (% style="background-color:yellow" %)**apt install minicom**
563 +
564 +
565 +Use minicom to connect to the RPI's terminal
566 +
567 +[[image:image-20220602153146-3.png||height="439" width="500"]]
568 +
569 +
570 +
571 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
572 +
573 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
574 +
575 +
576 +[[image:image-20220602154928-5.png||height="436" width="500"]]
577 +
578 +
579 +
580 +(% style="color:blue" %)**4. Send Uplink message**
581 +
582 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
583 +
584 +example: AT+SENDB=01,02,8,05820802581ea0a5
585 +
586 +
587 +[[image:image-20220602160339-6.png||height="517" width="600"]]
588 +
589 +
590 +
591 +Check to see if TTN received the message
592 +
593 +[[image:image-20220602160627-7.png||height="369" width="800"]]
594 +
595 +
596 +
597 +== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
598 +
599 +
600 +=== 3.8.1  Hardware and Software Connection ===
601 +
602 +
603 +==== (% style="color:blue" %)**Overview：**(%%) ====
604 +
605 +
317 317  (((
318 -(% style="color:blue" %)**1.  Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
607 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
608 +
609 +* Send real-time location information of mobile phone to LoRaWAN network.
610 +* Check LoRaWAN network signal strengh.
611 +* Manually send messages to LoRaWAN network.
319 319  )))
320 320  
321 321  
322 -[[image:image-20220602103227-6.png]]
323 323  
616 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
324 324  
325 -[[image:image-20220602103357-7.png]]
618 +A USB to Type-C adapter is needed to connect to a Mobile phone.
326 326  
620 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
327 327  
622 +[[image:image-20220813174353-2.png||height="360" width="313"]]
328 328  
329 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
330 -(% style="color:blue" %)**2.  Select the COM port corresponding to USB TTL**
331 331  
625 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
332 332  
333 -[[image:image-20220602103844-8.png]]
627 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
334 334  
629 +[[image:image-20220813173738-1.png]]
335 335  
336 336  
337 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
338 -(% style="color:blue" %)**3.  Select the bin file to burn**
632 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
339 339  
634 +Function and page introduction
340 340  
341 -[[image:image-20220602104144-9.png]]
636 +[[image:image-20220723113448-7.png||height="995" width="450"]]
342 342  
638 +**Block Explain:**
343 343  
344 -[[image:image-20220602104251-10.png]]
640 +1.  Display LA66 USB LoRaWAN Module connection status
345 345  
642 +2.  Check and reconnect
346 346  
347 -[[image:image-20220602104402-11.png]]
644 +3.  Turn send timestamps on or off
348 348  
646 +4.  Display LoRaWan connection status
349 349  
648 +5.  Check LoRaWan connection status
350 350  
351 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
352 -(% style="color:blue" %)**4.  Click to start the download**
650 +6.  The RSSI value of the node when the ACK is received
353 353  
652 +7.  Node's Signal Strength Icon
354 354  
355 -[[image:image-20220602104923-13.png]]
654 +8.  Configure Location Uplink Interval
356 356  
656 +9.  AT command input box
357 357  
658 +10.  Send Button:  Send input box info to LA66 USB Adapter
358 358  
359 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
360 -(% style="color:blue" %)**5.  Check update process**
660 +11.  Output Log from LA66 USB adapter
361 361  
662 +12.  clear log button
362 362  
363 -[[image:image-20220602104948-14.png]]
664 +13.  exit button
364 364  
365 365  
667 +LA66 USB LoRaWAN Module not connected
366 366  
367 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
368 -(% style="color:blue" %)**The following picture shows that the burning is successful**
669 +[[image:image-20220723110520-5.png||height="677" width="508"]]
369 369  
370 370  
371 -[[image:image-20220602105251-15.png]]
372 372  
673 +Connect LA66 USB LoRaWAN Module
373 373  
675 +[[image:image-20220723110626-6.png||height="681" width="511"]]
374 374  
375 -= 2.  FAQ =
376 376  
377 377  
378 -== 2.1  How to Compile Source Code for LA66? ==
679 +=== 3.8.2 Send data to TTNv3 and plot location info in Node-Red ===
379 379  
380 380  
381 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
682 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
382 382  
684 +[[image:image-20220723134549-8.png]]
383 383  
384 384  
385 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
386 386  
688 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
387 387  
388 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:.Instruction for LA66 Peer to Peer firmware.WebHome]]
690 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
389 389  
692 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
390 390  
694 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
391 391  
392 -= 3.  Order Info =
393 393  
697 +Example output in NodeRed is as below:
394 394  
395 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
699 +[[image:image-20220723144339-1.png]]
396 396  
397 397  
398 -(% style="color:blue" %)**XXX**(%%): The default frequency band
399 399  
400 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
401 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
402 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
403 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
404 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
405 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
406 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
407 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
408 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
703 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
409 409  
410 410  
706 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
411 411  
412 -= 4.  Reference =
708 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
413 413  
710 +[[image:image-20220723150132-2.png]]
414 414  
415 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
416 416  
417 417  
714 += 4.  FAQ =
418 418  
419 -= 5.  FCC Statement =
420 420  
717 +== 4.1  How to Compile Source Code for LA66? ==
421 421  
422 -(% style="color:red" %)**FCC Caution:**
423 423  
424 -Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
720 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Compile and Upload Code to ASR6601 Platform]]
425 425  
426 -This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
427 427  
428 428  
429 -(% style="color:red" %)**IMPORTANT NOTE: **
724 += 5.  Order Info =
430 430  
431 -(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
432 432  
433 -—Reorient or relocate the receiving antenna.
727 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
434 434  
435 -—Increase the separation between the equipment and receiver.
436 436  
437 -—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
730 +(% style="color:blue" %)**XXX**(%%): The default frequency band
438 438  
439 -—Consult the dealer or an experienced radio/TV technician for help.
732 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
733 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
734 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
735 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
736 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
737 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
738 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
739 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
740 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
440 440  
742 += 6.  Reference =
441 441  
442 -(% style="color:red" %)**FCC Radiation Exposure Statement: **
443 443  
444 -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. 
745 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content
image-20220912084334-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912084352-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
image-20220912084412-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0