Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 166.2 >
edited by Xiaoling
on 2022/11/14 11:41
To version < 134.8 >
edited by Xiaoling
on 2022/07/26 10:45
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -6,14 +6,114 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 11  
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
15 +(((
16 +(((
17 +[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 +)))
15 15  
16 16  (((
21 +
22 +)))
23 +
24 +(((
25 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 +)))
27 +)))
28 +
29 +(((
30 +(((
31 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 +)))
33 +)))
34 +
35 +(((
36 +(((
37 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 +)))
39 +
40 +(((
41 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 +)))
43 +)))
44 +
45 +(((
46 +(((
47 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 +)))
49 +)))
50 +
51 +
52 +
53 +== 1.2  Features ==
54 +
55 +* Support LoRaWAN v1.0.4 protocol
56 +* Support peer-to-peer protocol
57 +* TCXO crystal to ensure RF performance on low temperature
58 +* SMD Antenna pad and i-pex antenna connector
59 +* Available in different frequency LoRaWAN frequency bands.
60 +* World-wide unique OTAA keys.
61 +* AT Command via UART-TTL interface
62 +* Firmware upgradable via UART interface
63 +* Ultra-long RF range
64 +
65 +== 1.3  Specification ==
66 +
67 +* CPU: 32-bit 48 MHz
68 +* Flash: 256KB
69 +* RAM: 64KB
70 +* Input Power Range: 1.8v ~~ 3.7v
71 +* Power Consumption: < 4uA.
72 +* Frequency Range: 150 MHz ~~ 960 MHz
73 +* Maximum Power +22 dBm constant RF output
74 +* High sensitivity: -148 dBm
75 +* Temperature:
76 +** Storage: -55 ~~ +125℃
77 +** Operating: -40 ~~ +85℃
78 +* Humidity:
79 +** Storage: 5 ~~ 95% (Non-Condensing)
80 +** Operating: 10 ~~ 95% (Non-Condensing)
81 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
82 +* LoRa Rx current: <9 mA
83 +* I/O Voltage: 3.3v
84 +
85 +== 1.4  AT Command ==
86 +
87 +
88 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
89 +
90 +
91 +
92 +== 1.5  Dimension ==
93 +
94 +[[image:image-20220718094750-3.png]]
95 +
96 +
97 +
98 +== 1.6  Pin Mapping ==
99 +
100 +[[image:image-20220720111850-1.png]]
101 +
102 +
103 +
104 +== 1.7  Land Pattern ==
105 +
106 +[[image:image-20220517072821-2.png]]
107 +
108 +
109 +
110 += 2.  LA66 LoRaWAN Shield =
111 +
112 +
113 +== 2.1  Overview ==
114 +
115 +
116 +(((
17 17  [[image:image-20220715000826-2.png||height="145" width="220"]]
18 18  )))
19 19  
... ... @@ -51,11 +51,10 @@
51 51  
52 52  
53 53  
54 -== 1.2  Features ==
154 +== 2.2  Features ==
55 55  
56 -
57 57  * Arduino Shield base on LA66 LoRaWAN module
58 -* Support LoRaWAN v1.0.3 protocol
157 +* Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 61  * SMA connector
... ... @@ -65,11 +65,8 @@
65 65  * Firmware upgradable via UART interface
66 66  * Ultra-long RF range
67 67  
167 +== 2.3  Specification ==
68 68  
69 -
70 -== 1.3  Specification ==
71 -
72 -
73 73  * CPU: 32-bit 48 MHz
74 74  * Flash: 256KB
75 75  * RAM: 64KB
... ... @@ -88,27 +88,18 @@
88 88  * LoRa Rx current: <9 mA
89 89  * I/O Voltage: 3.3v
90 90  
187 +== 2.4  LED ==
91 91  
92 92  
93 -== 1.4  Pin Mapping & LED ==
94 -
95 -
96 -[[image:image-20220817085048-1.png||height="533" width="734"]]
97 -
98 -
99 -
100 100  ~1. The LED lights up red when there is an upstream data packet
101 101  2. When the network is successfully connected, the green light will be on for 5 seconds
102 102  3. Purple light on when receiving downlink data packets
103 103  
104 104  
105 -[[image:image-20220820112305-1.png||height="515" width="749"]]
106 106  
196 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
107 107  
108 108  
109 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
110 -
111 -
112 112  **Show connection diagram：**
113 113  
114 114  
... ... @@ -126,19 +126,14 @@
126 126  (% style="color:blue" %)**2.  Open project**
127 127  
128 128  
129 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
216 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
130 130  
131 -[[image:image-20220726135239-1.png]]
132 132  
133 133  
134 -
135 135  (% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
136 136  
137 137  
138 -[[image:image-20220726135356-2.png]]
139 139  
140 -
141 -
142 142  (% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
143 143  
144 144  
... ... @@ -146,13 +146,13 @@
146 146  
147 147  
148 148  
149 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
231 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
150 150  
151 151  
152 152  (% style="color:blue" %)**1.  Open project**
153 153  
154 154  
155 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
237 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
156 156  
157 157  
158 158  [[image:image-20220723172502-8.png]]
... ... @@ -159,7 +159,7 @@
159 159  
160 160  
161 161  
162 -(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
244 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
163 163  
164 164  
165 165  [[image:image-20220723172938-9.png||height="652" width="1050"]]
... ... @@ -166,13 +166,13 @@
166 166  
167 167  
168 168  
169 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
251 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
170 170  
171 171  
172 172  (% style="color:blue" %)**1.  Open project**
173 173  
174 174  
175 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0>>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
257 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
176 176  
177 177  
178 178  [[image:image-20220723173341-10.png||height="581" width="1014"]]
... ... @@ -186,259 +186,447 @@
186 186  
187 187  
188 188  
271 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
189 189  
273 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
190 190  
191 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
275 +[[image:image-20220723175700-12.png||height="602" width="995"]]
192 192  
193 193  
194 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
195 195  
279 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
196 196  
197 -[[image:image-20220723175700-12.png||height="602" width="995"]]
198 198  
282 +=== 2.8.1  Items needed for update ===
199 199  
200 200  
201 -== 1.8  Example: How to join helium ==
285 +1. LA66 LoRaWAN Shield
286 +1. Arduino
287 +1. USB TO TTL Adapter
202 202  
289 +[[image:image-20220602100052-2.png||height="385" width="600"]]
203 203  
204 -(% style="color:blue" %)**1.  Create a new device.**
205 205  
292 +=== 2.8.2  Connection ===
206 206  
207 -[[image:image-20220907165500-1.png||height="464" width="940"]]
208 208  
295 +[[image:image-20220602101311-3.png||height="276" width="600"]]
209 209  
210 210  
211 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
298 +(((
299 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
300 +)))
212 212  
302 +(((
303 +(% style="background-color:yellow" %)**GND  <-> GND
304 +TXD  <->  TXD
305 +RXD  <->  RXD**
306 +)))
213 213  
214 -[[image:image-20220907165837-2.png||height="375" width="809"]]
215 215  
309 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
216 216  
311 +Connect USB TTL Adapter to PC after connecting the wires
217 217  
218 -(% style="color:blue" %)**3.  Use AT commands.**
219 219  
314 +[[image:image-20220602102240-4.png||height="304" width="600"]]
220 220  
221 -[[image:image-20220602100052-2.png||height="385" width="600"]]
222 222  
317 +=== 2.8.3  Upgrade steps ===
223 223  
224 224  
225 -(% style="color:#0000ff" %)**4.  Use command AT+CFG to get device configuration**
320 +==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
226 226  
227 227  
228 -[[image:image-20220907170308-3.png||height="556" width="617"]]
323 +[[image:image-20220602102824-5.png||height="306" width="600"]]
229 229  
230 230  
231 231  
232 -(% style="color:blue" %)**5.  Network successfully.**
327 +==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
233 233  
234 234  
235 -[[image:image-20220907170436-4.png]]
330 +[[image:image-20220602104701-12.png||height="285" width="600"]]
236 236  
237 237  
238 238  
239 -(% style="color:blue" %)**6.  Send uplink using command**
334 +==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
240 240  
241 241  
242 -[[image:image-20220912084334-1.png]]
337 +(((
338 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
339 +)))
243 243  
244 244  
245 -[[image:image-20220912084412-3.png]]
342 +[[image:image-20220602103227-6.png]]
246 246  
247 247  
345 +[[image:image-20220602103357-7.png]]
248 248  
249 -[[image:image-20220907170744-6.png||height="242" width="798"]]
250 250  
251 251  
349 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
350 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
252 252  
253 -== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
254 254  
353 +[[image:image-20220602103844-8.png]]
255 255  
256 -=== 1.9.1  Items needed for update ===
257 257  
258 258  
259 -1. LA66 LoRaWAN Shield
260 -1. Arduino
261 -1. USB TO TTL Adapter
357 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
358 +(% style="color:blue" %)**3. Select the bin file to burn**
262 262  
263 -[[image:image-20220602100052-2.png||height="385" width="600"]]
264 264  
361 +[[image:image-20220602104144-9.png]]
265 265  
266 266  
267 -=== 1.9.2  Connection ===
364 +[[image:image-20220602104251-10.png]]
268 268  
269 269  
270 -[[image:image-20220602101311-3.png||height="276" width="600"]]
367 +[[image:image-20220602104402-11.png]]
271 271  
272 272  
370 +
371 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
372 +(% style="color:blue" %)**4. Click to start the download**
373 +
374 +[[image:image-20220602104923-13.png]]
375 +
376 +
377 +
378 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
379 +(% style="color:blue" %)**5. Check update process**
380 +
381 +
382 +[[image:image-20220602104948-14.png]]
383 +
384 +
385 +
386 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
387 +(% style="color:blue" %)**The following picture shows that the burning is successful**
388 +
389 +[[image:image-20220602105251-15.png]]
390 +
391 +
392 +
393 += 3.  LA66 USB LoRaWAN Adapter =
394 +
395 +
396 +== 3.1  Overview ==
397 +
398 +
399 +[[image:image-20220715001142-3.png||height="145" width="220"]]
400 +
401 +
273 273  (((
274 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
403 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
275 275  )))
276 276  
277 277  (((
278 -(% style="background-color:yellow" %)**GND  <-> GND
279 -TXD  <->  TXD
280 -RXD  <->  RXD**
407 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
281 281  )))
282 282  
410 +(((
411 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
412 +)))
283 283  
284 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
414 +(((
415 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
416 +)))
285 285  
286 -Connect USB TTL Adapter to PC after connecting the wires
418 +(((
419 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
420 +)))
287 287  
288 288  
289 -[[image:image-20220602102240-4.png||height="304" width="600"]]
290 290  
424 +== 3.2  Features ==
291 291  
426 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
427 +* Ultra-long RF range
428 +* Support LoRaWAN v1.0.4 protocol
429 +* Support peer-to-peer protocol
430 +* TCXO crystal to ensure RF performance on low temperature
431 +* Spring RF antenna
432 +* Available in different frequency LoRaWAN frequency bands.
433 +* World-wide unique OTAA keys.
434 +* AT Command via UART-TTL interface
435 +* Firmware upgradable via UART interface
436 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
292 292  
293 -=== 1.9.3  Upgrade steps ===
438 +== 3.3  Specification ==
294 294  
440 +* CPU: 32-bit 48 MHz
441 +* Flash: 256KB
442 +* RAM: 64KB
443 +* Input Power Range: 5v
444 +* Frequency Range: 150 MHz ~~ 960 MHz
445 +* Maximum Power +22 dBm constant RF output
446 +* High sensitivity: -148 dBm
447 +* Temperature:
448 +** Storage: -55 ~~ +125℃
449 +** Operating: -40 ~~ +85℃
450 +* Humidity:
451 +** Storage: 5 ~~ 95% (Non-Condensing)
452 +** Operating: 10 ~~ 95% (Non-Condensing)
453 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
454 +* LoRa Rx current: <9 mA
295 295  
456 +== 3.4  Pin Mapping & LED ==
296 296  
297 -==== (% style="color:blue" %)**1.  Switch SW1 to put in ISP position**(%%) ====
298 298  
299 299  
300 -[[image:image-20220602102824-5.png||height="306" width="600"]]
460 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
301 301  
302 302  
463 +(((
464 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
465 +)))
303 303  
304 304  
305 -==== (% style="color:blue" %)**2.  Press the RST switch once**(%%) ====
468 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
306 306  
307 307  
308 -[[image:image-20220817085447-1.png]]
471 +[[image:image-20220723100027-1.png]]
309 309  
310 310  
474 +Open the serial port tool
311 311  
476 +[[image:image-20220602161617-8.png]]
312 312  
313 -==== (% style="color:blue" %)**3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade**(%%) ====
478 +[[image:image-20220602161718-9.png||height="457" width="800"]]
314 314  
315 315  
316 316  
317 -(((
318 -(% style="color:blue" %)**1.  Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
319 -)))
482 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
320 320  
484 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
321 321  
322 -[[image:image-20220602103227-6.png]]
323 323  
487 +[[image:image-20220602161935-10.png||height="498" width="800"]]
324 324  
325 -[[image:image-20220602103357-7.png]]
326 326  
327 327  
491 +(% style="color:blue" %)**3. See Uplink Command**
328 328  
329 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
330 -(% style="color:blue" %)**2.  Select the COM port corresponding to USB TTL**
493 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
331 331  
495 +example: AT+SENDB=01,02,8,05820802581ea0a5
332 332  
333 -[[image:image-20220602103844-8.png]]
497 +[[image:image-20220602162157-11.png||height="497" width="800"]]
334 334  
335 335  
336 336  
337 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
338 -(% style="color:blue" %)**3.  Select the bin file to burn**
501 +(% style="color:blue" %)**4. Check to see if TTN received the message**
339 339  
503 +[[image:image-20220602162331-12.png||height="420" width="800"]]
340 340  
341 -[[image:image-20220602104144-9.png]]
342 342  
343 343  
344 -[[image:image-20220602104251-10.png]]
507 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
345 345  
346 346  
347 -[[image:image-20220602104402-11.png]]
510 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
348 348  
512 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
349 349  
514 +(% style="color:red" %)**Preconditions:**
350 350  
351 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
352 -(% style="color:blue" %)**4.  Click to start the download**
516 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
353 353  
518 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
354 354  
355 -[[image:image-20220602104923-13.png]]
356 356  
357 357  
522 +(% style="color:blue" %)**Steps for usage:**
358 358  
359 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
360 -(% style="color:blue" %)**5.  Check update process**
524 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
361 361  
526 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
362 362  
363 -[[image:image-20220602104948-14.png]]
528 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
364 364  
365 365  
366 366  
367 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
368 -(% style="color:blue" %)**The following picture shows that the burning is successful**
532 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
369 369  
370 370  
371 -[[image:image-20220602105251-15.png]]
535 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
372 372  
373 373  
538 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
374 374  
375 -= 2.  FAQ =
540 +[[image:image-20220723100439-2.png]]
376 376  
377 377  
378 -== 2.1  How to Compile Source Code for LA66? ==
379 379  
544 +(% style="color:blue" %)**2. Install Minicom in RPi.**
380 380  
381 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
546 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
382 382  
548 + (% style="background-color:yellow" %)**apt update**
383 383  
550 + (% style="background-color:yellow" %)**apt install minicom**
384 384  
385 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
386 386  
553 +Use minicom to connect to the RPI's terminal
387 387  
388 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:.Instruction for LA66 Peer to Peer firmware.WebHome]]
555 +[[image:image-20220602153146-3.png||height="439" width="500"]]
389 389  
390 390  
391 391  
392 -= 3.  Order Info =
559 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
393 393  
561 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
394 394  
395 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
396 396  
564 +[[image:image-20220602154928-5.png||height="436" width="500"]]
397 397  
398 -(% style="color:blue" %)**XXX**(%%): The default frequency band
399 399  
400 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
401 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
402 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
403 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
404 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
405 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
406 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
407 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
408 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
409 409  
568 +(% style="color:blue" %)**4. Send Uplink message**
410 410  
570 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
411 411  
412 -= 4.  Reference =
572 +example: AT+SENDB=01,02,8,05820802581ea0a5
413 413  
414 414  
415 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
575 +[[image:image-20220602160339-6.png||height="517" width="600"]]
416 416  
417 417  
418 418  
419 -= 5.  FCC Statement =
579 +Check to see if TTN received the message
420 420  
581 +[[image:image-20220602160627-7.png||height="369" width="800"]]
421 421  
422 -(% style="color:red" %)**FCC Caution:**
423 423  
424 -Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
425 425  
426 -This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
585 +== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and APP sample process and DRAGINO-LA66-APP. ==
427 427  
428 428  
429 -(% style="color:red" %)**IMPORTANT NOTE: **
588 +=== 3.8.1 DRAGINO-LA66-APP ===
430 430  
431 -(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
432 432  
433 -—Reorient or relocate the receiving antenna.
591 +[[image:image-20220723102027-3.png]]
434 434  
435 -—Increase the separation between the equipment and receiver.
436 436  
437 -—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
438 438  
439 -—Consult the dealer or an experienced radio/TV technician for help.
595 +==== (% style="color:blue" %)**Overview：**(%%) ====
440 440  
441 441  
442 -(% style="color:red" %)**FCC Radiation Exposure Statement: **
598 +DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Adapter and APP sample process. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Adapter.
443 443  
444 -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. 
600 +View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
601 +
602 +
603 +
604 +==== (% style="color:blue" %)**Conditions of Use：**(%%) ====
605 +
606 +
607 +Requires a type-c to USB adapter
608 +
609 +[[image:image-20220723104754-4.png]]
610 +
611 +
612 +
613 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
614 +
615 +
616 +Function and page introduction
617 +
618 +[[image:image-20220723113448-7.png||height="1481" width="670"]]
619 +
620 +1.Display LA66 USB LoRaWAN Module connection status
621 +
622 +2.Check and reconnect
623 +
624 +3.Turn send timestamps on or off
625 +
626 +4.Display LoRaWan connection status
627 +
628 +5.Check LoRaWan connection status
629 +
630 +6.The RSSI value of the node when the ACK is received
631 +
632 +7.Node's Signal Strength Icon
633 +
634 +8.Set the packet sending interval of the node in seconds
635 +
636 +9.AT command input box
637 +
638 +10.Send AT command button
639 +
640 +11.Node log box
641 +
642 +12.clear log button
643 +
644 +13.exit button
645 +
646 +
647 +LA66 USB LoRaWAN Module not connected
648 +
649 +[[image:image-20220723110520-5.png||height="903" width="677"]]
650 +
651 +
652 +
653 +Connect LA66 USB LoRaWAN Module
654 +
655 +[[image:image-20220723110626-6.png||height="906" width="680"]]
656 +
657 +
658 +
659 +=== 3.8.2  Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Adapter and integrate it into Node-RED ===
660 +
661 +
662 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
663 +
664 +[[image:image-20220723134549-8.png]]
665 +
666 +
667 +
668 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
669 +
670 +Sample JSON file please go to this link to download：放置JSON文件的链接
671 +
672 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
673 +
674 +The following is the positioning effect map
675 +
676 +[[image:image-20220723144339-1.png]]
677 +
678 +
679 +
680 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
681 +
682 +
683 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
684 +
685 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
686 +
687 +[[image:image-20220723150132-2.png]]
688 +
689 +
690 +
691 += 4.  Order Info =
692 +
693 +
694 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
695 +
696 +
697 +(% style="color:blue" %)**XXX**(%%): The default frequency band
698 +
699 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
700 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
701 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
702 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
703 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
704 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
705 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
706 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
707 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
708 +
709 +
710 +
711 += 5.  Reference =
712 +
713 +
714 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content
image-20220912084334-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912084352-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
image-20220912084412-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0