Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 166.2 >
edited by Xiaoling
on 2022/11/14 11:41
To version < 134.10 >
edited by Xiaoling
on 2022/07/26 10:47
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -6,14 +6,114 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 11  
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
15 +(((
16 +(((
17 +[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 +)))
15 15  
16 16  (((
21 +
22 +)))
23 +
24 +(((
25 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 +)))
27 +)))
28 +
29 +(((
30 +(((
31 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 +)))
33 +)))
34 +
35 +(((
36 +(((
37 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 +)))
39 +
40 +(((
41 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 +)))
43 +)))
44 +
45 +(((
46 +(((
47 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 +)))
49 +)))
50 +
51 +
52 +
53 +== 1.2  Features ==
54 +
55 +* Support LoRaWAN v1.0.4 protocol
56 +* Support peer-to-peer protocol
57 +* TCXO crystal to ensure RF performance on low temperature
58 +* SMD Antenna pad and i-pex antenna connector
59 +* Available in different frequency LoRaWAN frequency bands.
60 +* World-wide unique OTAA keys.
61 +* AT Command via UART-TTL interface
62 +* Firmware upgradable via UART interface
63 +* Ultra-long RF range
64 +
65 +== 1.3  Specification ==
66 +
67 +* CPU: 32-bit 48 MHz
68 +* Flash: 256KB
69 +* RAM: 64KB
70 +* Input Power Range: 1.8v ~~ 3.7v
71 +* Power Consumption: < 4uA.
72 +* Frequency Range: 150 MHz ~~ 960 MHz
73 +* Maximum Power +22 dBm constant RF output
74 +* High sensitivity: -148 dBm
75 +* Temperature:
76 +** Storage: -55 ~~ +125℃
77 +** Operating: -40 ~~ +85℃
78 +* Humidity:
79 +** Storage: 5 ~~ 95% (Non-Condensing)
80 +** Operating: 10 ~~ 95% (Non-Condensing)
81 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
82 +* LoRa Rx current: <9 mA
83 +* I/O Voltage: 3.3v
84 +
85 +== 1.4  AT Command ==
86 +
87 +
88 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
89 +
90 +
91 +
92 +== 1.5  Dimension ==
93 +
94 +[[image:image-20220718094750-3.png]]
95 +
96 +
97 +
98 +== 1.6  Pin Mapping ==
99 +
100 +[[image:image-20220720111850-1.png]]
101 +
102 +
103 +
104 +== 1.7  Land Pattern ==
105 +
106 +[[image:image-20220517072821-2.png]]
107 +
108 +
109 +
110 += 2.  LA66 LoRaWAN Shield =
111 +
112 +
113 +== 2.1  Overview ==
114 +
115 +
116 +(((
17 17  [[image:image-20220715000826-2.png||height="145" width="220"]]
18 18  )))
19 19  
... ... @@ -51,11 +51,10 @@
51 51  
52 52  
53 53  
54 -== 1.2  Features ==
154 +== 2.2  Features ==
55 55  
56 -
57 57  * Arduino Shield base on LA66 LoRaWAN module
58 -* Support LoRaWAN v1.0.3 protocol
157 +* Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 61  * SMA connector
... ... @@ -65,11 +65,8 @@
65 65  * Firmware upgradable via UART interface
66 66  * Ultra-long RF range
67 67  
167 +== 2.3  Specification ==
68 68  
69 -
70 -== 1.3  Specification ==
71 -
72 -
73 73  * CPU: 32-bit 48 MHz
74 74  * Flash: 256KB
75 75  * RAM: 64KB
... ... @@ -88,27 +88,18 @@
88 88  * LoRa Rx current: <9 mA
89 89  * I/O Voltage: 3.3v
90 90  
187 +== 2.4  LED ==
91 91  
92 92  
93 -== 1.4  Pin Mapping & LED ==
94 -
95 -
96 -[[image:image-20220817085048-1.png||height="533" width="734"]]
97 -
98 -
99 -
100 100  ~1. The LED lights up red when there is an upstream data packet
101 101  2. When the network is successfully connected, the green light will be on for 5 seconds
102 102  3. Purple light on when receiving downlink data packets
103 103  
104 104  
105 -[[image:image-20220820112305-1.png||height="515" width="749"]]
106 106  
196 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
107 107  
108 108  
109 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
110 -
111 -
112 112  **Show connection diagram：**
113 113  
114 114  
... ... @@ -126,19 +126,14 @@
126 126  (% style="color:blue" %)**2.  Open project**
127 127  
128 128  
129 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
216 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
130 130  
131 -[[image:image-20220726135239-1.png]]
132 132  
133 133  
134 -
135 135  (% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
136 136  
137 137  
138 -[[image:image-20220726135356-2.png]]
139 139  
140 -
141 -
142 142  (% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
143 143  
144 144  
... ... @@ -146,13 +146,13 @@
146 146  
147 147  
148 148  
149 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
231 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
150 150  
151 151  
152 152  (% style="color:blue" %)**1.  Open project**
153 153  
154 154  
155 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
237 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
156 156  
157 157  
158 158  [[image:image-20220723172502-8.png]]
... ... @@ -159,7 +159,7 @@
159 159  
160 160  
161 161  
162 -(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
244 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
163 163  
164 164  
165 165  [[image:image-20220723172938-9.png||height="652" width="1050"]]
... ... @@ -166,13 +166,13 @@
166 166  
167 167  
168 168  
169 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
251 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
170 170  
171 171  
172 172  (% style="color:blue" %)**1.  Open project**
173 173  
174 174  
175 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0>>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
257 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
176 176  
177 177  
178 178  [[image:image-20220723173341-10.png||height="581" width="1014"]]
... ... @@ -186,259 +186,458 @@
186 186  
187 187  
188 188  
271 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
189 189  
273 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
190 190  
191 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
275 +[[image:image-20220723175700-12.png||height="602" width="995"]]
192 192  
193 193  
194 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
195 195  
279 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
196 196  
197 -[[image:image-20220723175700-12.png||height="602" width="995"]]
198 198  
282 +=== 2.8.1  Items needed for update ===
199 199  
200 200  
201 -== 1.8  Example: How to join helium ==
285 +1. LA66 LoRaWAN Shield
286 +1. Arduino
287 +1. USB TO TTL Adapter
202 202  
289 +[[image:image-20220602100052-2.png||height="385" width="600"]]
203 203  
204 -(% style="color:blue" %)**1.  Create a new device.**
205 205  
292 +=== 2.8.2  Connection ===
206 206  
207 -[[image:image-20220907165500-1.png||height="464" width="940"]]
208 208  
295 +[[image:image-20220602101311-3.png||height="276" width="600"]]
209 209  
210 210  
211 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
298 +(((
299 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
300 +)))
212 212  
302 +(((
303 +(% style="background-color:yellow" %)**GND  <-> GND
304 +TXD  <->  TXD
305 +RXD  <->  RXD**
306 +)))
213 213  
214 -[[image:image-20220907165837-2.png||height="375" width="809"]]
215 215  
309 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
216 216  
311 +Connect USB TTL Adapter to PC after connecting the wires
217 217  
218 -(% style="color:blue" %)**3.  Use AT commands.**
219 219  
314 +[[image:image-20220602102240-4.png||height="304" width="600"]]
220 220  
221 -[[image:image-20220602100052-2.png||height="385" width="600"]]
222 222  
317 +=== 2.8.3  Upgrade steps ===
223 223  
224 224  
225 -(% style="color:#0000ff" %)**4.  Use command AT+CFG to get device configuration**
320 +==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
226 226  
227 227  
228 -[[image:image-20220907170308-3.png||height="556" width="617"]]
323 +[[image:image-20220602102824-5.png||height="306" width="600"]]
229 229  
230 230  
231 231  
232 -(% style="color:blue" %)**5.  Network successfully.**
327 +==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
233 233  
234 234  
235 -[[image:image-20220907170436-4.png]]
330 +[[image:image-20220602104701-12.png||height="285" width="600"]]
236 236  
237 237  
238 238  
239 -(% style="color:blue" %)**6.  Send uplink using command**
334 +==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
240 240  
241 241  
242 -[[image:image-20220912084334-1.png]]
337 +(((
338 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
339 +)))
243 243  
244 244  
245 -[[image:image-20220912084412-3.png]]
342 +[[image:image-20220602103227-6.png]]
246 246  
247 247  
345 +[[image:image-20220602103357-7.png]]
248 248  
249 -[[image:image-20220907170744-6.png||height="242" width="798"]]
250 250  
251 251  
349 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
350 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
252 252  
253 -== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
254 254  
353 +[[image:image-20220602103844-8.png]]
255 255  
256 -=== 1.9.1  Items needed for update ===
257 257  
258 258  
259 -1. LA66 LoRaWAN Shield
260 -1. Arduino
261 -1. USB TO TTL Adapter
357 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
358 +(% style="color:blue" %)**3. Select the bin file to burn**
262 262  
263 -[[image:image-20220602100052-2.png||height="385" width="600"]]
264 264  
361 +[[image:image-20220602104144-9.png]]
265 265  
266 266  
267 -=== 1.9.2  Connection ===
364 +[[image:image-20220602104251-10.png]]
268 268  
269 269  
270 -[[image:image-20220602101311-3.png||height="276" width="600"]]
367 +[[image:image-20220602104402-11.png]]
271 271  
272 272  
370 +
371 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
372 +(% style="color:blue" %)**4. Click to start the download**
373 +
374 +[[image:image-20220602104923-13.png]]
375 +
376 +
377 +
378 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
379 +(% style="color:blue" %)**5. Check update process**
380 +
381 +
382 +[[image:image-20220602104948-14.png]]
383 +
384 +
385 +
386 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
387 +(% style="color:blue" %)**The following picture shows that the burning is successful**
388 +
389 +[[image:image-20220602105251-15.png]]
390 +
391 +
392 +
393 += 3.  LA66 USB LoRaWAN Adapter =
394 +
395 +
396 +== 3.1  Overview ==
397 +
398 +
399 +[[image:image-20220715001142-3.png||height="145" width="220"]]
400 +
401 +
273 273  (((
274 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
403 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
275 275  )))
276 276  
277 277  (((
278 -(% style="background-color:yellow" %)**GND  <-> GND
279 -TXD  <->  TXD
280 -RXD  <->  RXD**
407 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
281 281  )))
282 282  
410 +(((
411 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
412 +)))
283 283  
284 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
414 +(((
415 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
416 +)))
285 285  
286 -Connect USB TTL Adapter to PC after connecting the wires
418 +(((
419 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
420 +)))
287 287  
288 288  
289 -[[image:image-20220602102240-4.png||height="304" width="600"]]
290 290  
424 +== 3.2  Features ==
291 291  
426 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
427 +* Ultra-long RF range
428 +* Support LoRaWAN v1.0.4 protocol
429 +* Support peer-to-peer protocol
430 +* TCXO crystal to ensure RF performance on low temperature
431 +* Spring RF antenna
432 +* Available in different frequency LoRaWAN frequency bands.
433 +* World-wide unique OTAA keys.
434 +* AT Command via UART-TTL interface
435 +* Firmware upgradable via UART interface
436 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
292 292  
293 -=== 1.9.3  Upgrade steps ===
294 294  
295 295  
296 296  
297 -==== (% style="color:blue" %)**1.  Switch SW1 to put in ISP position**(%%) ====
441 +== 3.3  Specification ==
298 298  
443 +* CPU: 32-bit 48 MHz
444 +* Flash: 256KB
445 +* RAM: 64KB
446 +* Input Power Range: 5v
447 +* Frequency Range: 150 MHz ~~ 960 MHz
448 +* Maximum Power +22 dBm constant RF output
449 +* High sensitivity: -148 dBm
450 +* Temperature:
451 +** Storage: -55 ~~ +125℃
452 +** Operating: -40 ~~ +85℃
453 +* Humidity:
454 +** Storage: 5 ~~ 95% (Non-Condensing)
455 +** Operating: 10 ~~ 95% (Non-Condensing)
456 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
457 +* LoRa Rx current: <9 mA
299 299  
300 -[[image:image-20220602102824-5.png||height="306" width="600"]]
301 301  
302 302  
303 303  
462 +== 3.4  Pin Mapping & LED ==
304 304  
305 -==== (% style="color:blue" %)**2.  Press the RST switch once**(%%) ====
306 306  
307 307  
308 -[[image:image-20220817085447-1.png]]
466 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
309 309  
310 310  
469 +(((
470 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
471 +)))
311 311  
312 312  
313 -==== (% style="color:blue" %)**3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade**(%%) ====
474 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
314 314  
315 315  
477 +[[image:image-20220723100027-1.png]]
316 316  
317 -(((
318 -(% style="color:blue" %)**1.  Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
319 -)))
320 320  
480 +Open the serial port tool
321 321  
322 -[[image:image-20220602103227-6.png]]
482 +[[image:image-20220602161617-8.png]]
323 323  
484 +[[image:image-20220602161718-9.png||height="457" width="800"]]
324 324  
325 -[[image:image-20220602103357-7.png]]
326 326  
327 327  
488 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
328 328  
329 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
330 -(% style="color:blue" %)**2.  Select the COM port corresponding to USB TTL**
490 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
331 331  
332 332  
333 -[[image:image-20220602103844-8.png]]
493 +[[image:image-20220602161935-10.png||height="498" width="800"]]
334 334  
335 335  
336 336  
337 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
338 -(% style="color:blue" %)**3.  Select the bin file to burn**
497 +(% style="color:blue" %)**3. See Uplink Command**
339 339  
499 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
340 340  
341 -[[image:image-20220602104144-9.png]]
501 +example: AT+SENDB=01,02,8,05820802581ea0a5
342 342  
503 +[[image:image-20220602162157-11.png||height="497" width="800"]]
343 343  
344 -[[image:image-20220602104251-10.png]]
345 345  
346 346  
347 -[[image:image-20220602104402-11.png]]
507 +(% style="color:blue" %)**4. Check to see if TTN received the message**
348 348  
509 +[[image:image-20220602162331-12.png||height="420" width="800"]]
349 349  
350 350  
351 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
352 -(% style="color:blue" %)**4.  Click to start the download**
353 353  
513 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
354 354  
355 -[[image:image-20220602104923-13.png]]
356 356  
516 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
357 357  
518 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
358 358  
359 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
360 -(% style="color:blue" %)**5.  Check update process**
520 +(% style="color:red" %)**Preconditions:**
361 361  
522 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
362 362  
363 -[[image:image-20220602104948-14.png]]
524 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
364 364  
365 365  
366 366  
367 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
368 -(% style="color:blue" %)**The following picture shows that the burning is successful**
528 +(% style="color:blue" %)**Steps for usage:**
369 369  
530 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
370 370  
371 -[[image:image-20220602105251-15.png]]
532 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
372 372  
534 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
373 373  
374 374  
375 -= 2.  FAQ =
376 376  
538 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
377 377  
378 -== 2.1  How to Compile Source Code for LA66? ==
379 379  
541 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
380 380  
381 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
382 382  
544 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
383 383  
546 +[[image:image-20220723100439-2.png]]
384 384  
385 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
386 386  
387 387  
388 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:.Instruction for LA66 Peer to Peer firmware.WebHome]]
550 +(% style="color:blue" %)**2. Install Minicom in RPi.**
389 389  
552 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
390 390  
554 + (% style="background-color:yellow" %)**apt update**
391 391  
392 -= 3.  Order Info =
556 + (% style="background-color:yellow" %)**apt install minicom**
393 393  
394 394  
395 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
559 +Use minicom to connect to the RPI's terminal
396 396  
561 +[[image:image-20220602153146-3.png||height="439" width="500"]]
397 397  
398 -(% style="color:blue" %)**XXX**(%%): The default frequency band
399 399  
400 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
401 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
402 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
403 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
404 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
405 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
406 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
407 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
408 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
409 409  
565 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
410 410  
567 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
411 411  
412 -= 4.  Reference =
413 413  
570 +[[image:image-20220602154928-5.png||height="436" width="500"]]
414 414  
415 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
416 416  
417 417  
574 +(% style="color:blue" %)**4. Send Uplink message**
418 418  
419 -= 5.  FCC Statement =
576 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
420 420  
578 +example: AT+SENDB=01,02,8,05820802581ea0a5
421 421  
422 -(% style="color:red" %)**FCC Caution:**
423 423  
424 -Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
581 +[[image:image-20220602160339-6.png||height="517" width="600"]]
425 425  
426 -This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
427 427  
428 428  
429 -(% style="color:red" %)**IMPORTANT NOTE: **
585 +Check to see if TTN received the message
430 430  
431 -(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
587 +[[image:image-20220602160627-7.png||height="369" width="800"]]
432 432  
433 -—Reorient or relocate the receiving antenna.
434 434  
435 -—Increase the separation between the equipment and receiver.
436 436  
437 -—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
591 +== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and APP sample process and DRAGINO-LA66-APP. ==
438 438  
439 -—Consult the dealer or an experienced radio/TV technician for help.
440 440  
594 +=== 3.8.1  DRAGINO-LA66-APP ===
441 441  
442 -(% style="color:red" %)**FCC Radiation Exposure Statement: **
443 443  
444 -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. 
597 +[[image:image-20220723102027-3.png]]
598 +
599 +
600 +
601 +==== (% style="color:blue" %)**Overview：**(%%) ====
602 +
603 +
604 +(((
605 +DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Adapter and APP sample process. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Adapter.
606 +)))
607 +
608 +(((
609 +View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
610 +)))
611 +
612 +
613 +
614 +==== (% style="color:blue" %)**Conditions of Use：**(%%) ====
615 +
616 +
617 +Requires a type-c to USB adapter
618 +
619 +[[image:image-20220723104754-4.png]]
620 +
621 +
622 +
623 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
624 +
625 +
626 +Function and page introduction
627 +
628 +[[image:image-20220723113448-7.png||height="1481" width="670"]]
629 +
630 +
631 +1.Display LA66 USB LoRaWAN Module connection status
632 +
633 +2.Check and reconnect
634 +
635 +3.Turn send timestamps on or off
636 +
637 +4.Display LoRaWan connection status
638 +
639 +5.Check LoRaWan connection status
640 +
641 +6.The RSSI value of the node when the ACK is received
642 +
643 +7.Node's Signal Strength Icon
644 +
645 +8.Set the packet sending interval of the node in seconds
646 +
647 +9.AT command input box
648 +
649 +10.Send AT command button
650 +
651 +11.Node log box
652 +
653 +12.clear log button
654 +
655 +13.exit button
656 +
657 +
658 +LA66 USB LoRaWAN Module not connected
659 +
660 +[[image:image-20220723110520-5.png||height="903" width="677"]]
661 +
662 +
663 +
664 +Connect LA66 USB LoRaWAN Module
665 +
666 +[[image:image-20220723110626-6.png||height="906" width="680"]]
667 +
668 +
669 +
670 +=== 3.8.2  Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Adapter and integrate it into Node-RED ===
671 +
672 +
673 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
674 +
675 +[[image:image-20220723134549-8.png]]
676 +
677 +
678 +
679 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
680 +
681 +Sample JSON file please go to this link to download：放置JSON文件的链接
682 +
683 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
684 +
685 +The following is the positioning effect map
686 +
687 +[[image:image-20220723144339-1.png]]
688 +
689 +
690 +
691 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
692 +
693 +
694 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
695 +
696 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
697 +
698 +[[image:image-20220723150132-2.png]]
699 +
700 +
701 +
702 += 4.  Order Info =
703 +
704 +
705 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
706 +
707 +
708 +(% style="color:blue" %)**XXX**(%%): The default frequency band
709 +
710 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
711 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
712 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
713 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
714 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
715 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
716 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
717 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
718 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
719 +
720 +
721 +
722 += 5.  Reference =
723 +
724 +
725 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content
image-20220912084334-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912084352-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
image-20220912084412-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0