Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 166.1 >
edited by Edwin Chen
on 2022/11/09 15:19
To version < 106.1 >
edited by Herong Lu
on 2022/07/23 10:49
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Lu
Content
... ... @@ -6,15 +6,15 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 11  
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
15 -
16 16  (((
17 -[[image:image-20220715000826-2.png||height="145" width="220"]]
16 +(((
17 +[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 18  )))
19 19  
20 20  (((
... ... @@ -22,12 +22,13 @@
22 22  )))
23 23  
24 24  (((
25 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
25 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 26  )))
27 +)))
27 27  
28 28  (((
29 29  (((
30 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 31  )))
32 32  )))
33 33  
... ... @@ -35,10 +35,8 @@
35 35  (((
36 36  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 37  )))
38 -)))
39 39  
40 40  (((
41 -(((
42 42  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 43  )))
44 44  )))
... ... @@ -53,12 +53,10 @@
53 53  
54 54  == 1.2  Features ==
55 55  
56 -
57 -* Arduino Shield base on LA66 LoRaWAN module
58 -* Support LoRaWAN v1.0.3 protocol
55 +* Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 -* SMA connector
58 +* SMD Antenna pad and i-pex antenna connector
62 62  * Available in different frequency LoRaWAN frequency bands.
63 63  * World-wide unique OTAA keys.
64 64  * AT Command via UART-TTL interface
... ... @@ -68,7 +68,6 @@
68 68  
69 69  == 1.3  Specification ==
70 70  
71 -
72 72  * CPU: 32-bit 48 MHz
73 73  * Flash: 256KB
74 74  * RAM: 64KB
... ... @@ -88,353 +88,478 @@
88 88  * I/O Voltage: 3.3v
89 89  
90 90  
91 -== 1.4  Pin Mapping & LED ==
87 +== 1.4  AT Command ==
92 92  
93 93  
94 -[[image:image-20220817085048-1.png||height="533" width="734"]]
90 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
95 95  
96 96  
97 97  
98 -~1. The LED lights up red when there is an upstream data packet
99 -2. When the network is successfully connected, the green light will be on for 5 seconds
100 -3. Purple light on when receiving downlink data packets
94 +== 1.5  Dimension ==
101 101  
96 +[[image:image-20220718094750-3.png]]
102 102  
103 -[[image:image-20220820112305-1.png||height="515" width="749"]]
104 104  
105 105  
100 +== 1.6  Pin Mapping ==
106 106  
107 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
102 +[[image:image-20220720111850-1.png]]
108 108  
109 109  
110 -**Show connection diagram：**
111 111  
106 +== 1.7  Land Pattern ==
112 112  
113 -[[image:image-20220723170210-2.png||height="908" width="681"]]
108 +[[image:image-20220517072821-2.png]]
114 114  
115 115  
116 116  
117 -(% style="color:blue" %)**1.  open Arduino IDE**
112 += 2.  LA66 LoRaWAN Shield =
118 118  
119 119  
120 -[[image:image-20220723170545-4.png]]
115 +== 2.1  Overview ==
121 121  
122 122  
118 +(((
119 +[[image:image-20220715000826-2.png||height="145" width="220"]]
120 +)))
123 123  
124 -(% style="color:blue" %)**2.  Open project**
122 +(((
123 +
124 +)))
125 125  
126 +(((
127 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
128 +)))
126 126  
127 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
130 +(((
131 +(((
132 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
133 +)))
134 +)))
128 128  
129 -[[image:image-20220726135239-1.png]]
136 +(((
137 +(((
138 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
139 +)))
140 +)))
130 130  
142 +(((
143 +(((
144 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
145 +)))
146 +)))
131 131  
148 +(((
149 +(((
150 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
151 +)))
152 +)))
132 132  
133 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
134 134  
135 135  
136 -[[image:image-20220726135356-2.png]]
156 +== 2.2  Features ==
137 137  
158 +* Arduino Shield base on LA66 LoRaWAN module
159 +* Support LoRaWAN v1.0.4 protocol
160 +* Support peer-to-peer protocol
161 +* TCXO crystal to ensure RF performance on low temperature
162 +* SMA connector
163 +* Available in different frequency LoRaWAN frequency bands.
164 +* World-wide unique OTAA keys.
165 +* AT Command via UART-TTL interface
166 +* Firmware upgradable via UART interface
167 +* Ultra-long RF range
138 138  
139 139  
140 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
170 +== 2.3  Specification ==
141 141  
172 +* CPU: 32-bit 48 MHz
173 +* Flash: 256KB
174 +* RAM: 64KB
175 +* Input Power Range: 1.8v ~~ 3.7v
176 +* Power Consumption: < 4uA.
177 +* Frequency Range: 150 MHz ~~ 960 MHz
178 +* Maximum Power +22 dBm constant RF output
179 +* High sensitivity: -148 dBm
180 +* Temperature:
181 +** Storage: -55 ~~ +125℃
182 +** Operating: -40 ~~ +85℃
183 +* Humidity:
184 +** Storage: 5 ~~ 95% (Non-Condensing)
185 +** Operating: 10 ~~ 95% (Non-Condensing)
186 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
187 +* LoRa Rx current: <9 mA
188 +* I/O Voltage: 3.3v
142 142  
143 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
144 144  
191 +== 2.4  Pin Mapping & LED ==
145 145  
146 146  
147 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
148 148  
195 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
149 149  
150 -(% style="color:blue" %)**1.  Open project**
151 151  
152 152  
153 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
199 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
154 154  
155 155  
156 -[[image:image-20220723172502-8.png]]
157 157  
203 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
158 158  
159 159  
160 -(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
161 161  
207 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
162 162  
163 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
164 164  
210 +=== 2.8.1  Items needed for update ===
165 165  
212 +1. LA66 LoRaWAN Shield
213 +1. Arduino
214 +1. USB TO TTL Adapter
166 166  
167 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
216 +[[image:image-20220602100052-2.png||height="385" width="600"]]
168 168  
169 169  
170 -(% style="color:blue" %)**1.  Open project**
219 +=== 2.8.2  Connection ===
171 171  
172 172  
173 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0>>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
222 +[[image:image-20220602101311-3.png||height="276" width="600"]]
174 174  
175 175  
176 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
225 +(((
226 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
227 +)))
177 177  
229 +(((
230 +(% style="background-color:yellow" %)**GND  <-> GND
231 +TXD  <->  TXD
232 +RXD  <->  RXD**
233 +)))
178 178  
179 179  
180 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
236 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
181 181  
238 +Connect USB TTL Adapter to PC after connecting the wires
182 182  
183 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
184 184  
241 +[[image:image-20220602102240-4.png||height="304" width="600"]]
185 185  
186 186  
244 +=== 2.8.3  Upgrade steps ===
187 187  
188 188  
189 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
247 +==== 1.  Switch SW1 to put in ISP position ====
190 190  
191 191  
192 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
250 +[[image:image-20220602102824-5.png||height="306" width="600"]]
193 193  
194 194  
195 -[[image:image-20220723175700-12.png||height="602" width="995"]]
196 196  
254 +==== 2.  Press the RST switch once ====
197 197  
198 198  
199 -== 1.8  Example: How to join helium ==
257 +[[image:image-20220602104701-12.png||height="285" width="600"]]
200 200  
201 201  
202 -(% style="color:blue" %)**1.  Create a new device.**
203 203  
261 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
204 204  
205 -[[image:image-20220907165500-1.png||height="464" width="940"]]
206 206  
264 +(((
265 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
266 +)))
207 207  
208 208  
209 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
269 +[[image:image-20220602103227-6.png]]
210 210  
211 211  
212 -[[image:image-20220907165837-2.png||height="375" width="809"]]
272 +[[image:image-20220602103357-7.png]]
213 213  
214 214  
215 215  
216 -(% style="color:blue" %)**3.  Use AT commands.**
276 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
277 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
217 217  
218 218  
219 -[[image:image-20220602100052-2.png||height="385" width="600"]]
280 +[[image:image-20220602103844-8.png]]
220 220  
221 221  
222 222  
223 -(% style="color:#0000ff" %)**4.  Use command AT+CFG to get device configuration**
284 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
285 +(% style="color:blue" %)**3. Select the bin file to burn**
224 224  
225 225  
226 -[[image:image-20220907170308-3.png||height="556" width="617"]]
288 +[[image:image-20220602104144-9.png]]
227 227  
228 228  
291 +[[image:image-20220602104251-10.png]]
229 229  
230 -(% style="color:blue" %)**5.  Network successfully.**
231 231  
294 +[[image:image-20220602104402-11.png]]
232 232  
233 -[[image:image-20220907170436-4.png]]
234 234  
235 235  
298 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
299 +(% style="color:blue" %)**4. Click to start the download**
236 236  
237 -(% style="color:blue" %)**6.  Send uplink using command**
301 +[[image:image-20220602104923-13.png]]
238 238  
239 239  
240 -[[image:image-20220912084334-1.png]]
241 241  
305 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
306 +(% style="color:blue" %)**5. Check update process**
242 242  
243 -[[image:image-20220912084412-3.png]]
244 244  
309 +[[image:image-20220602104948-14.png]]
245 245  
246 246  
247 -[[image:image-20220907170744-6.png||height="242" width="798"]]
248 248  
313 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
314 +(% style="color:blue" %)**The following picture shows that the burning is successful**
249 249  
316 +[[image:image-20220602105251-15.png]]
250 250  
251 -== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
252 252  
253 253  
254 -=== 1.9.1  Items needed for update ===
320 += 3.  LA66 USB LoRaWAN Adapter =
255 255  
256 256  
257 -1. LA66 LoRaWAN Shield
258 -1. Arduino
259 -1. USB TO TTL Adapter
323 +== 3.1  Overview ==
260 260  
261 -[[image:image-20220602100052-2.png||height="385" width="600"]]
262 262  
326 +[[image:image-20220715001142-3.png||height="145" width="220"]]
263 263  
264 264  
265 -=== 1.9.2  Connection ===
329 +(((
330 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
331 +)))
266 266  
333 +(((
334 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
335 +)))
267 267  
268 -[[image:image-20220602101311-3.png||height="276" width="600"]]
337 +(((
338 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
339 +)))
269 269  
341 +(((
342 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
343 +)))
270 270  
271 271  (((
272 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
346 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
273 273  )))
274 274  
349 +
350 +
351 +== 3.2  Features ==
352 +
353 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
354 +* Ultra-long RF range
355 +* Support LoRaWAN v1.0.4 protocol
356 +* Support peer-to-peer protocol
357 +* TCXO crystal to ensure RF performance on low temperature
358 +* Spring RF antenna
359 +* Available in different frequency LoRaWAN frequency bands.
360 +* World-wide unique OTAA keys.
361 +* AT Command via UART-TTL interface
362 +* Firmware upgradable via UART interface
363 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
364 +
365 +
366 +== 3.3  Specification ==
367 +
368 +* CPU: 32-bit 48 MHz
369 +* Flash: 256KB
370 +* RAM: 64KB
371 +* Input Power Range: 5v
372 +* Frequency Range: 150 MHz ~~ 960 MHz
373 +* Maximum Power +22 dBm constant RF output
374 +* High sensitivity: -148 dBm
375 +* Temperature:
376 +** Storage: -55 ~~ +125℃
377 +** Operating: -40 ~~ +85℃
378 +* Humidity:
379 +** Storage: 5 ~~ 95% (Non-Condensing)
380 +** Operating: 10 ~~ 95% (Non-Condensing)
381 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
382 +* LoRa Rx current: <9 mA
383 +
384 +
385 +== 3.4  Pin Mapping & LED ==
386 +
387 +
388 +
389 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
390 +
391 +
275 275  (((
276 -(% style="background-color:yellow" %)**GND  <-> GND
277 -TXD  <->  TXD
278 -RXD  <->  RXD**
393 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
279 279  )))
280 280  
281 281  
282 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
397 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
283 283  
284 -Connect USB TTL Adapter to PC after connecting the wires
285 285  
400 +[[image:image-20220723100027-1.png]]
286 286  
287 -[[image:image-20220602102240-4.png||height="304" width="600"]]
288 288  
403 +Open the serial port tool
289 289  
405 +[[image:image-20220602161617-8.png]]
290 290  
291 -=== 1.9.3  Upgrade steps ===
407 +[[image:image-20220602161718-9.png||height="457" width="800"]]
292 292  
293 293  
294 294  
295 -==== (% style="color:blue" %)**1.  Switch SW1 to put in ISP position**(%%) ====
411 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
296 296  
413 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
297 297  
298 -[[image:image-20220602102824-5.png||height="306" width="600"]]
299 299  
416 +[[image:image-20220602161935-10.png||height="498" width="800"]]
300 300  
301 301  
302 302  
303 -==== (% style="color:blue" %)**2.  Press the RST switch once**(%%) ====
420 +(% style="color:blue" %)**3. See Uplink Command**
304 304  
422 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
305 305  
306 -[[image:image-20220817085447-1.png]]
424 +example: AT+SENDB=01,02,8,05820802581ea0a5
307 307  
426 +[[image:image-20220602162157-11.png||height="497" width="800"]]
308 308  
309 309  
310 310  
311 -==== (% style="color:blue" %)**3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade**(%%) ====
430 +(% style="color:blue" %)**4. Check to see if TTN received the message**
312 312  
432 +[[image:image-20220602162331-12.png||height="420" width="800"]]
313 313  
314 314  
315 -(((
316 -(% style="color:blue" %)**1.  Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
317 -)))
318 318  
436 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
319 319  
320 -[[image:image-20220602103227-6.png]]
321 321  
439 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
322 322  
323 -[[image:image-20220602103357-7.png]]
441 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
324 324  
443 +(% style="color:red" %)**Preconditions:**
325 325  
445 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
326 326  
327 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
328 -(% style="color:blue" %)**2.  Select the COM port corresponding to USB TTL**
447 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
329 329  
330 330  
331 -[[image:image-20220602103844-8.png]]
332 332  
451 +(% style="color:blue" %)**Steps for usage:**
333 333  
453 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
334 334  
335 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
336 -(% style="color:blue" %)**3.  Select the bin file to burn**
455 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
337 337  
457 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
338 338  
339 -[[image:image-20220602104144-9.png]]
340 340  
341 341  
342 -[[image:image-20220602104251-10.png]]
461 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
343 343  
344 344  
345 -[[image:image-20220602104402-11.png]]
464 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
346 346  
347 347  
467 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
348 348  
349 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
350 -(% style="color:blue" %)**4.  Click to start the download**
469 +[[image:image-20220723100439-2.png]]
351 351  
352 352  
353 -[[image:image-20220602104923-13.png]]
354 354  
473 +(% style="color:blue" %)**2. Install Minicom in RPi.**
355 355  
475 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
356 356  
357 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
358 -(% style="color:blue" %)**5.  Check update process**
477 + (% style="background-color:yellow" %)**apt update**
359 359  
479 + (% style="background-color:yellow" %)**apt install minicom**
360 360  
361 -[[image:image-20220602104948-14.png]]
362 362  
482 +Use minicom to connect to the RPI's terminal
363 363  
484 +[[image:image-20220602153146-3.png||height="439" width="500"]]
364 364  
365 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
366 -(% style="color:blue" %)**The following picture shows that the burning is successful**
367 367  
368 368  
369 -[[image:image-20220602105251-15.png]]
488 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
370 370  
490 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
371 371  
372 372  
373 -= 2.  FAQ =
493 +[[image:image-20220602154928-5.png||height="436" width="500"]]
374 374  
375 375  
376 -== 2.1  How to Compile Source Code for LA66? ==
377 377  
497 +(% style="color:blue" %)**4. Send Uplink message**
378 378  
379 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
499 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
380 380  
501 +example: AT+SENDB=01,02,8,05820802581ea0a5
381 381  
382 382  
383 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
504 +[[image:image-20220602160339-6.png||height="517" width="600"]]
384 384  
385 385  
386 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:.Instruction for LA66 Peer to Peer firmware.WebHome]]
387 387  
508 +Check to see if TTN received the message
388 388  
510 +[[image:image-20220602160627-7.png||height="369" width="800"]]
389 389  
390 -= 3.  Order Info =
391 391  
392 392  
393 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
514 +== 3.8  Example: Use of LA66 USB LoRaWAN Module and DRAGINO-LA66-APP. ==
394 394  
516 +=== 3.8.1 DRAGINO-LA66-APP ===
395 395  
396 -(% style="color:blue" %)**XXX**(%%): The default frequency band
518 +[[image:image-20220723102027-3.png]]
397 397  
398 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
399 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
400 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
401 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
402 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
403 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
404 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
405 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
406 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
520 +==== Overview： ====
407 407  
522 +DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Module. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Module.（DRAGINO-LA66-APP currently only supports Android system）
408 408  
409 -= 4.  Reference =
524 +==== Conditions of Use： ====
410 410  
526 +Requires a type-c to USB adapter
411 411  
412 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
528 +[[image:image-20220723104754-4.png]]
413 413  
530 +==== Use of APP: ====
414 414  
415 -= 5.  FCC Statement =
532 +LA66 USB LoRaWAN Module not connected
416 416  
417 417  
418 -(% style="color:red" %)**FCC Caution:**
419 419  
420 -Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
536 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
421 421  
422 -This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
423 423  
424 424  
425 -(% style="color:red" %)**IMPORTANT NOTE: **
426 426  
427 -(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
541 += 4.  Order Info =
428 428  
429 -—Reorient or relocate the receiving antenna.
430 430  
431 -—Increase the separation between the equipment and receiver.
544 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
432 432  
433 -—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
434 434  
435 -—Consult the dealer or an experienced radio/TV technician for help.
547 +(% style="color:blue" %)**XXX**(%%): The default frequency band
436 436  
549 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
550 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
551 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
552 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
553 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
554 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
555 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
556 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
557 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
437 437  
438 -(% style="color:red" %)**FCC Radiation Exposure Statement: **
559 += 5.  Reference =
439 439  
440 -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. 
561 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content
image-20220912084334-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912084352-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
image-20220912084412-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0