Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 166.1 >
edited by Edwin Chen
on 2022/11/09 15:19
To version < 100.5 >
edited by Xiaoling
on 2022/07/19 11:45
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -6,15 +6,15 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 11  
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
15 -
16 16  (((
17 -[[image:image-20220715000826-2.png||height="145" width="220"]]
16 +(((
17 +[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 18  )))
19 19  
20 20  (((
... ... @@ -22,12 +22,13 @@
22 22  )))
23 23  
24 24  (((
25 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
25 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 26  )))
27 +)))
27 27  
28 28  (((
29 29  (((
30 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 31  )))
32 32  )))
33 33  
... ... @@ -35,10 +35,8 @@
35 35  (((
36 36  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 37  )))
38 -)))
39 39  
40 40  (((
41 -(((
42 42  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 43  )))
44 44  )))
... ... @@ -53,12 +53,10 @@
53 53  
54 54  == 1.2  Features ==
55 55  
56 -
57 -* Arduino Shield base on LA66 LoRaWAN module
58 -* Support LoRaWAN v1.0.3 protocol
55 +* Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 -* SMA connector
58 +* SMD Antenna pad and i-pex antenna connector
62 62  * Available in different frequency LoRaWAN frequency bands.
63 63  * World-wide unique OTAA keys.
64 64  * AT Command via UART-TTL interface
... ... @@ -65,10 +65,8 @@
65 65  * Firmware upgradable via UART interface
66 66  * Ultra-long RF range
67 67  
68 -
69 69  == 1.3  Specification ==
70 70  
71 -
72 72  * CPU: 32-bit 48 MHz
73 73  * Flash: 256KB
74 74  * RAM: 64KB
... ... @@ -87,354 +87,463 @@
87 87  * LoRa Rx current: <9 mA
88 88  * I/O Voltage: 3.3v
89 89  
85 +== 1.4  AT Command ==
90 90  
91 -== 1.4  Pin Mapping & LED ==
92 92  
88 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
93 93  
94 -[[image:image-20220817085048-1.png||height="533" width="734"]]
95 95  
96 96  
92 +== 1.5  Dimension ==
97 97  
98 -~1. The LED lights up red when there is an upstream data packet
99 -2. When the network is successfully connected, the green light will be on for 5 seconds
100 -3. Purple light on when receiving downlink data packets
94 +[[image:image-20220718094750-3.png]]
101 101  
102 102  
103 -[[image:image-20220820112305-1.png||height="515" width="749"]]
104 104  
105 105  
99 +== 1.6  Pin Mapping ==
106 106  
107 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
108 108  
102 +[[image:image-20220719093156-1.png]]
109 109  
110 -**Show connection diagram：**
111 111  
112 112  
113 -[[image:image-20220723170210-2.png||height="908" width="681"]]
106 +== 1.7  Land Pattern ==
114 114  
108 +[[image:image-20220517072821-2.png]]
115 115  
116 116  
117 -(% style="color:blue" %)**1.  open Arduino IDE**
118 118  
112 += 2.  LA66 LoRaWAN Shield =
119 119  
120 -[[image:image-20220723170545-4.png]]
121 121  
115 +== 2.1  Overview ==
122 122  
123 123  
124 -(% style="color:blue" %)**2.  Open project**
118 +(((
119 +[[image:image-20220715000826-2.png||height="145" width="220"]]
120 +)))
125 125  
122 +(((
123 +
124 +)))
126 126  
127 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
126 +(((
127 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
128 +)))
128 128  
129 -[[image:image-20220726135239-1.png]]
130 +(((
131 +(((
132 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
133 +)))
134 +)))
130 130  
136 +(((
137 +(((
138 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
139 +)))
140 +)))
131 131  
142 +(((
143 +(((
144 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
145 +)))
146 +)))
132 132  
133 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
148 +(((
149 +(((
150 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
151 +)))
152 +)))
134 134  
135 135  
136 -[[image:image-20220726135356-2.png]]
137 137  
156 +== 2.2  Features ==
138 138  
158 +* Arduino Shield base on LA66 LoRaWAN module
159 +* Support LoRaWAN v1.0.4 protocol
160 +* Support peer-to-peer protocol
161 +* TCXO crystal to ensure RF performance on low temperature
162 +* SMA connector
163 +* Available in different frequency LoRaWAN frequency bands.
164 +* World-wide unique OTAA keys.
165 +* AT Command via UART-TTL interface
166 +* Firmware upgradable via UART interface
167 +* Ultra-long RF range
139 139  
140 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
169 +== 2.3  Specification ==
141 141  
171 +* CPU: 32-bit 48 MHz
172 +* Flash: 256KB
173 +* RAM: 64KB
174 +* Input Power Range: 1.8v ~~ 3.7v
175 +* Power Consumption: < 4uA.
176 +* Frequency Range: 150 MHz ~~ 960 MHz
177 +* Maximum Power +22 dBm constant RF output
178 +* High sensitivity: -148 dBm
179 +* Temperature:
180 +** Storage: -55 ~~ +125℃
181 +** Operating: -40 ~~ +85℃
182 +* Humidity:
183 +** Storage: 5 ~~ 95% (Non-Condensing)
184 +** Operating: 10 ~~ 95% (Non-Condensing)
185 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
186 +* LoRa Rx current: <9 mA
187 +* I/O Voltage: 3.3v
142 142  
143 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
189 +== 2.4  Pin Mapping & LED ==
144 144  
145 145  
146 146  
147 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
193 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
148 148  
149 149  
150 -(% style="color:blue" %)**1.  Open project**
151 151  
197 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
152 152  
153 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
154 154  
155 155  
156 -[[image:image-20220723172502-8.png]]
201 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
157 157  
158 158  
159 159  
160 -(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
205 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
161 161  
162 162  
163 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
208 +=== 2.8.1  Items needed for update ===
164 164  
210 +1. LA66 LoRaWAN Shield
211 +1. Arduino
212 +1. USB TO TTL Adapter
165 165  
214 +[[image:image-20220602100052-2.png||height="385" width="600"]]
166 166  
167 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
168 168  
217 +=== 2.8.2  Connection ===
169 169  
170 -(% style="color:blue" %)**1.  Open project**
171 171  
220 +[[image:image-20220602101311-3.png||height="276" width="600"]]
172 172  
173 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0>>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
174 174  
223 +(((
224 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
225 +)))
175 175  
176 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
227 +(((
228 +(% style="background-color:yellow" %)**GND  <-> GND
229 +TXD  <->  TXD
230 +RXD  <->  RXD**
231 +)))
177 177  
178 178  
234 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
179 179  
180 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
236 +Connect USB TTL Adapter to PC after connecting the wires
181 181  
182 182  
183 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
239 +[[image:image-20220602102240-4.png||height="304" width="600"]]
184 184  
185 185  
242 +=== 2.8.3  Upgrade steps ===
186 186  
187 187  
245 +==== 1.  Switch SW1 to put in ISP position ====
188 188  
189 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
190 190  
248 +[[image:image-20220602102824-5.png||height="306" width="600"]]
191 191  
192 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
193 193  
194 194  
195 -[[image:image-20220723175700-12.png||height="602" width="995"]]
252 +==== 2.  Press the RST switch once ====
196 196  
197 197  
255 +[[image:image-20220602104701-12.png||height="285" width="600"]]
198 198  
199 -== 1.8  Example: How to join helium ==
200 200  
201 201  
202 -(% style="color:blue" %)**1.  Create a new device.**
259 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
203 203  
204 204  
205 -[[image:image-20220907165500-1.png||height="464" width="940"]]
262 +(((
263 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
264 +)))
206 206  
207 207  
267 +[[image:image-20220602103227-6.png]]
208 208  
209 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
210 210  
270 +[[image:image-20220602103357-7.png]]
211 211  
212 -[[image:image-20220907165837-2.png||height="375" width="809"]]
213 213  
214 214  
274 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
275 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
215 215  
216 -(% style="color:blue" %)**3.  Use AT commands.**
217 217  
278 +[[image:image-20220602103844-8.png]]
218 218  
219 -[[image:image-20220602100052-2.png||height="385" width="600"]]
220 220  
221 221  
282 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
283 +(% style="color:blue" %)**3. Select the bin file to burn**
222 222  
223 -(% style="color:#0000ff" %)**4.  Use command AT+CFG to get device configuration**
224 224  
286 +[[image:image-20220602104144-9.png]]
225 225  
226 -[[image:image-20220907170308-3.png||height="556" width="617"]]
227 227  
289 +[[image:image-20220602104251-10.png]]
228 228  
229 229  
230 -(% style="color:blue" %)**5.  Network successfully.**
292 +[[image:image-20220602104402-11.png]]
231 231  
232 232  
233 -[[image:image-20220907170436-4.png]]
234 234  
296 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
297 +(% style="color:blue" %)**4. Click to start the download**
235 235  
299 +[[image:image-20220602104923-13.png]]
236 236  
237 -(% style="color:blue" %)**6.  Send uplink using command**
238 238  
239 239  
240 -[[image:image-20220912084334-1.png]]
303 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
304 +(% style="color:blue" %)**5. Check update process**
241 241  
242 242  
243 -[[image:image-20220912084412-3.png]]
307 +[[image:image-20220602104948-14.png]]
244 244  
245 245  
246 246  
247 -[[image:image-20220907170744-6.png||height="242" width="798"]]
311 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
312 +(% style="color:blue" %)**The following picture shows that the burning is successful**
248 248  
314 +[[image:image-20220602105251-15.png]]
249 249  
250 250  
251 -== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
252 252  
318 += 3.  LA66 USB LoRaWAN Adapter =
253 253  
254 -=== 1.9.1  Items needed for update ===
255 255  
321 +== 3.1  Overview ==
256 256  
257 -1. LA66 LoRaWAN Shield
258 -1. Arduino
259 -1. USB TO TTL Adapter
260 260  
261 -[[image:image-20220602100052-2.png||height="385" width="600"]]
324 +[[image:image-20220715001142-3.png||height="145" width="220"]]
262 262  
263 263  
327 +(((
328 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
329 +)))
264 264  
265 -=== 1.9.2  Connection ===
331 +(((
332 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
333 +)))
266 266  
335 +(((
336 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
337 +)))
267 267  
268 -[[image:image-20220602101311-3.png||height="276" width="600"]]
269 -
270 -
271 271  (((
272 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
340 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
273 273  )))
274 274  
275 275  (((
276 -(% style="background-color:yellow" %)**GND  <-> GND
277 -TXD  <->  TXD
278 -RXD  <->  RXD**
344 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
279 279  )))
280 280  
281 281  
282 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
283 283  
284 -Connect USB TTL Adapter to PC after connecting the wires
349 +== 3.2  Features ==
285 285  
351 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
352 +* Ultra-long RF range
353 +* Support LoRaWAN v1.0.4 protocol
354 +* Support peer-to-peer protocol
355 +* TCXO crystal to ensure RF performance on low temperature
356 +* Spring RF antenna
357 +* Available in different frequency LoRaWAN frequency bands.
358 +* World-wide unique OTAA keys.
359 +* AT Command via UART-TTL interface
360 +* Firmware upgradable via UART interface
361 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
286 286  
287 -[[image:image-20220602102240-4.png||height="304" width="600"]]
288 288  
289 289  
365 +== 3.3  Specification ==
290 290  
291 -=== 1.9.3  Upgrade steps ===
367 +* CPU: 32-bit 48 MHz
368 +* Flash: 256KB
369 +* RAM: 64KB
370 +* Input Power Range: 5v
371 +* Frequency Range: 150 MHz ~~ 960 MHz
372 +* Maximum Power +22 dBm constant RF output
373 +* High sensitivity: -148 dBm
374 +* Temperature:
375 +** Storage: -55 ~~ +125℃
376 +** Operating: -40 ~~ +85℃
377 +* Humidity:
378 +** Storage: 5 ~~ 95% (Non-Condensing)
379 +** Operating: 10 ~~ 95% (Non-Condensing)
380 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
381 +* LoRa Rx current: <9 mA
292 292  
293 293  
294 294  
295 -==== (% style="color:blue" %)**1.  Switch SW1 to put in ISP position**(%%) ====
385 +== 3.4  Pin Mapping & LED ==
296 296  
297 297  
298 -[[image:image-20220602102824-5.png||height="306" width="600"]]
299 299  
389 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
300 300  
301 301  
392 +(((
393 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
394 +)))
302 302  
303 -==== (% style="color:blue" %)**2.  Press the RST switch once**(%%) ====
304 304  
397 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
305 305  
306 -[[image:image-20220817085447-1.png]]
307 307  
400 +[[image:image-20220602171217-1.png||height="538" width="800"]]
308 308  
309 309  
403 +Open the serial port tool
310 310  
311 -==== (% style="color:blue" %)**3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade**(%%) ====
405 +[[image:image-20220602161617-8.png]]
312 312  
407 +[[image:image-20220602161718-9.png||height="457" width="800"]]
313 313  
314 314  
315 -(((
316 -(% style="color:blue" %)**1.  Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
317 -)))
318 318  
411 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
319 319  
320 -[[image:image-20220602103227-6.png]]
413 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
321 321  
322 322  
323 -[[image:image-20220602103357-7.png]]
416 +[[image:image-20220602161935-10.png||height="498" width="800"]]
324 324  
325 325  
326 326  
327 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
328 -(% style="color:blue" %)**2.  Select the COM port corresponding to USB TTL**
420 +(% style="color:blue" %)**3. See Uplink Command**
329 329  
422 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
330 330  
331 -[[image:image-20220602103844-8.png]]
424 +example: AT+SENDB=01,02,8,05820802581ea0a5
332 332  
426 +[[image:image-20220602162157-11.png||height="497" width="800"]]
333 333  
334 334  
335 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
336 -(% style="color:blue" %)**3.  Select the bin file to burn**
337 337  
430 +(% style="color:blue" %)**4. Check to see if TTN received the message**
338 338  
339 -[[image:image-20220602104144-9.png]]
432 +[[image:image-20220602162331-12.png||height="420" width="800"]]
340 340  
341 341  
342 -[[image:image-20220602104251-10.png]]
343 343  
436 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
344 344  
345 -[[image:image-20220602104402-11.png]]
346 346  
439 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
347 347  
348 348  
349 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
350 -(% style="color:blue" %)**4.  Click to start the download**
442 +(% style="color:red" %)**Preconditions:**
351 351  
444 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
352 352  
353 -[[image:image-20220602104923-13.png]]
446 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
354 354  
355 355  
356 356  
357 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
358 -(% style="color:blue" %)**5.  Check update process**
450 +(% style="color:blue" %)**Steps for usage:**
359 359  
452 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
360 360  
361 -[[image:image-20220602104948-14.png]]
454 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
362 362  
456 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
363 363  
364 364  
365 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
366 -(% style="color:blue" %)**The following picture shows that the burning is successful**
367 367  
460 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
368 368  
369 -[[image:image-20220602105251-15.png]]
370 370  
463 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
371 371  
372 372  
373 -= 2.  FAQ =
466 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
374 374  
468 +[[image:image-20220602171233-2.png||height="538" width="800"]]
375 375  
376 -== 2.1  How to Compile Source Code for LA66? ==
377 377  
378 378  
379 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
472 +(% style="color:blue" %)**2. Install Minicom in RPi.**
380 380  
474 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
381 381  
476 + (% style="background-color:yellow" %)**apt update**
382 382  
383 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
478 + (% style="background-color:yellow" %)**apt install minicom**
384 384  
385 385  
386 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:.Instruction for LA66 Peer to Peer firmware.WebHome]]
481 +Use minicom to connect to the RPI's terminal
387 387  
483 +[[image:image-20220602153146-3.png||height="439" width="500"]]
388 388  
389 389  
390 -= 3.  Order Info =
391 391  
487 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
392 392  
393 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
489 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
394 394  
395 395  
396 -(% style="color:blue" %)**XXX**(%%): The default frequency band
492 +[[image:image-20220602154928-5.png||height="436" width="500"]]
397 397  
398 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
399 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
400 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
401 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
402 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
403 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
404 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
405 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
406 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
407 407  
408 408  
409 -= 4.  Reference =
496 +(% style="color:blue" %)**4. Send Uplink message**
410 410  
498 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
411 411  
412 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
500 +example: AT+SENDB=01,02,8,05820802581ea0a5
413 413  
414 414  
415 -= 5.  FCC Statement =
503 +[[image:image-20220602160339-6.png||height="517" width="600"]]
416 416  
417 417  
418 -(% style="color:red" %)**FCC Caution:**
419 419  
420 -Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
507 +Check to see if TTN received the message
421 421  
422 -This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
509 +[[image:image-20220602160627-7.png||height="369" width="800"]]
423 423  
424 424  
425 -(% style="color:red" %)**IMPORTANT NOTE: **
426 426  
427 -(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
513 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
428 428  
429 -—Reorient or relocate the receiving antenna.
430 430  
431 -—Increase the separation between the equipment and receiver.
432 432  
433 -—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
517 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
434 434  
435 -—Consult the dealer or an experienced radio/TV technician for help.
436 436  
437 437  
438 -(% style="color:red" %)**FCC Radiation Exposure Statement: **
439 439  
440 -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. 
522 += 4.  Order Info =
523 +
524 +
525 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
526 +
527 +
528 +(% style="color:blue" %)**XXX**(%%): The default frequency band
529 +
530 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
531 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
532 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
533 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
534 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
535 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
536 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
537 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
538 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
539 +
540 +
541 +
542 += 5.  Reference =
543 +
544 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content
image-20220912084334-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912084352-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
image-20220912084412-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0