Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 165.5 >
edited by Xiaoling
on 2022/10/10 11:39
To version < 106.1 >
edited by Herong Lu
on 2022/07/23 10:49
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Lu
Content
... ... @@ -6,15 +6,15 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 11  
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
15 -
16 16  (((
17 -[[image:image-20220715000826-2.png||height="145" width="220"]]
16 +(((
17 +[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 18  )))
19 19  
20 20  (((
... ... @@ -22,12 +22,13 @@
22 22  )))
23 23  
24 24  (((
25 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
25 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 26  )))
27 +)))
27 27  
28 28  (((
29 29  (((
30 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 31  )))
32 32  )))
33 33  
... ... @@ -35,10 +35,8 @@
35 35  (((
36 36  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 37  )))
38 -)))
39 39  
40 40  (((
41 -(((
42 42  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 43  )))
44 44  )))
... ... @@ -53,12 +53,10 @@
53 53  
54 54  == 1.2  Features ==
55 55  
56 -
57 -* Arduino Shield base on LA66 LoRaWAN module
58 -* Support LoRaWAN v1.0.3 protocol
55 +* Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 -* SMA connector
58 +* SMD Antenna pad and i-pex antenna connector
62 62  * Available in different frequency LoRaWAN frequency bands.
63 63  * World-wide unique OTAA keys.
64 64  * AT Command via UART-TTL interface
... ... @@ -66,10 +66,8 @@
66 66  * Ultra-long RF range
67 67  
68 68  
69 -
70 70  == 1.3  Specification ==
71 71  
72 -
73 73  * CPU: 32-bit 48 MHz
74 74  * Flash: 256KB
75 75  * RAM: 64KB
... ... @@ -89,357 +89,478 @@
89 89  * I/O Voltage: 3.3v
90 90  
91 91  
87 +== 1.4  AT Command ==
92 92  
93 -== 1.4  Pin Mapping & LED ==
94 94  
90 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
95 95  
96 -[[image:image-20220817085048-1.png||height="533" width="734"]]
97 97  
98 98  
94 +== 1.5  Dimension ==
99 99  
100 -~1. The LED lights up red when there is an upstream data packet
101 -2. When the network is successfully connected, the green light will be on for 5 seconds
102 -3. Purple light on when receiving downlink data packets
96 +[[image:image-20220718094750-3.png]]
103 103  
104 104  
105 -[[image:image-20220820112305-1.png||height="515" width="749"]]
106 106  
100 +== 1.6  Pin Mapping ==
107 107  
102 +[[image:image-20220720111850-1.png]]
108 108  
109 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
110 110  
111 111  
112 -**Show connection diagram：**
106 +== 1.7  Land Pattern ==
113 113  
108 +[[image:image-20220517072821-2.png]]
114 114  
115 -[[image:image-20220723170210-2.png||height="908" width="681"]]
116 116  
117 117  
112 += 2.  LA66 LoRaWAN Shield =
118 118  
119 -(% style="color:blue" %)**1.  open Arduino IDE**
120 120  
115 +== 2.1  Overview ==
121 121  
122 -[[image:image-20220723170545-4.png]]
123 123  
118 +(((
119 +[[image:image-20220715000826-2.png||height="145" width="220"]]
120 +)))
124 124  
122 +(((
123 +
124 +)))
125 125  
126 -(% style="color:blue" %)**2.  Open project**
126 +(((
127 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
128 +)))
127 127  
130 +(((
131 +(((
132 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
133 +)))
134 +)))
128 128  
129 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
136 +(((
137 +(((
138 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
139 +)))
140 +)))
130 130  
142 +(((
143 +(((
144 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
145 +)))
146 +)))
131 131  
132 -[[image:image-20220726135239-1.png]]
148 +(((
149 +(((
150 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
151 +)))
152 +)))
133 133  
134 134  
135 135  
136 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
156 +== 2.2  Features ==
137 137  
158 +* Arduino Shield base on LA66 LoRaWAN module
159 +* Support LoRaWAN v1.0.4 protocol
160 +* Support peer-to-peer protocol
161 +* TCXO crystal to ensure RF performance on low temperature
162 +* SMA connector
163 +* Available in different frequency LoRaWAN frequency bands.
164 +* World-wide unique OTAA keys.
165 +* AT Command via UART-TTL interface
166 +* Firmware upgradable via UART interface
167 +* Ultra-long RF range
138 138  
139 -[[image:image-20220726135356-2.png]]
140 140  
170 +== 2.3  Specification ==
141 141  
172 +* CPU: 32-bit 48 MHz
173 +* Flash: 256KB
174 +* RAM: 64KB
175 +* Input Power Range: 1.8v ~~ 3.7v
176 +* Power Consumption: < 4uA.
177 +* Frequency Range: 150 MHz ~~ 960 MHz
178 +* Maximum Power +22 dBm constant RF output
179 +* High sensitivity: -148 dBm
180 +* Temperature:
181 +** Storage: -55 ~~ +125℃
182 +** Operating: -40 ~~ +85℃
183 +* Humidity:
184 +** Storage: 5 ~~ 95% (Non-Condensing)
185 +** Operating: 10 ~~ 95% (Non-Condensing)
186 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
187 +* LoRa Rx current: <9 mA
188 +* I/O Voltage: 3.3v
142 142  
143 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
144 144  
191 +== 2.4  Pin Mapping & LED ==
145 145  
146 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
147 147  
148 148  
195 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
149 149  
150 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
151 151  
152 152  
153 -(% style="color:blue" %)**1.  Open project**
199 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
154 154  
155 155  
156 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
157 157  
203 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
158 158  
159 -[[image:image-20220723172502-8.png]]
160 160  
161 161  
207 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
162 162  
163 -(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
164 164  
210 +=== 2.8.1  Items needed for update ===
165 165  
166 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
212 +1. LA66 LoRaWAN Shield
213 +1. Arduino
214 +1. USB TO TTL Adapter
167 167  
216 +[[image:image-20220602100052-2.png||height="385" width="600"]]
168 168  
169 169  
170 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
219 +=== 2.8.2  Connection ===
171 171  
172 172  
173 -(% style="color:blue" %)**1.  Open project**
222 +[[image:image-20220602101311-3.png||height="276" width="600"]]
174 174  
175 175  
176 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
225 +(((
226 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
227 +)))
177 177  
229 +(((
230 +(% style="background-color:yellow" %)**GND  <-> GND
231 +TXD  <->  TXD
232 +RXD  <->  RXD**
233 +)))
178 178  
179 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
180 180  
236 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
181 181  
238 +Connect USB TTL Adapter to PC after connecting the wires
182 182  
183 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
184 184  
241 +[[image:image-20220602102240-4.png||height="304" width="600"]]
185 185  
186 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
187 187  
244 +=== 2.8.3  Upgrade steps ===
188 188  
189 189  
247 +==== 1.  Switch SW1 to put in ISP position ====
190 190  
191 191  
192 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
250 +[[image:image-20220602102824-5.png||height="306" width="600"]]
193 193  
194 194  
195 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
196 196  
254 +==== 2.  Press the RST switch once ====
197 197  
198 -[[image:image-20220723175700-12.png||height="602" width="995"]]
199 199  
257 +[[image:image-20220602104701-12.png||height="285" width="600"]]
200 200  
201 201  
202 -== 1.8  Example: How to join helium ==
203 203  
261 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
204 204  
205 -(% style="color:blue" %)**1.  Create a new device.**
206 206  
264 +(((
265 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
266 +)))
207 207  
208 -[[image:image-20220907165500-1.png||height="464" width="940"]]
209 209  
269 +[[image:image-20220602103227-6.png]]
210 210  
211 211  
212 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
272 +[[image:image-20220602103357-7.png]]
213 213  
214 214  
215 -[[image:image-20220907165837-2.png||height="375" width="809"]]
216 216  
276 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
277 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
217 217  
218 218  
219 -(% style="color:blue" %)**3.  Use AT commands.**
280 +[[image:image-20220602103844-8.png]]
220 220  
221 221  
222 -[[image:image-20220602100052-2.png||height="385" width="600"]]
223 223  
284 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
285 +(% style="color:blue" %)**3. Select the bin file to burn**
224 224  
225 225  
226 -(% style="color:#0000ff" %)**4.  Use command AT+CFG to get device configuration**
288 +[[image:image-20220602104144-9.png]]
227 227  
228 228  
229 -[[image:image-20220907170308-3.png||height="556" width="617"]]
291 +[[image:image-20220602104251-10.png]]
230 230  
231 231  
294 +[[image:image-20220602104402-11.png]]
232 232  
233 -(% style="color:blue" %)**5.  Network successfully.**
234 234  
235 235  
236 -[[image:image-20220907170436-4.png]]
298 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
299 +(% style="color:blue" %)**4. Click to start the download**
237 237  
301 +[[image:image-20220602104923-13.png]]
238 238  
239 239  
240 -(% style="color:blue" %)**6.  Send uplink using command**
241 241  
305 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
306 +(% style="color:blue" %)**5. Check update process**
242 242  
243 -[[image:image-20220912084334-1.png]]
244 244  
309 +[[image:image-20220602104948-14.png]]
245 245  
246 -[[image:image-20220912084412-3.png]]
247 247  
248 248  
313 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
314 +(% style="color:blue" %)**The following picture shows that the burning is successful**
249 249  
250 -[[image:image-20220907170744-6.png||height="242" width="798"]]
316 +[[image:image-20220602105251-15.png]]
251 251  
252 252  
253 253  
254 -== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
320 += 3.  LA66 USB LoRaWAN Adapter =
255 255  
256 256  
257 -=== 1.9.1  Items needed for update ===
323 +== 3.1  Overview ==
258 258  
259 259  
260 -1. LA66 LoRaWAN Shield
261 -1. Arduino
262 -1. USB TO TTL Adapter
326 +[[image:image-20220715001142-3.png||height="145" width="220"]]
263 263  
264 -[[image:image-20220602100052-2.png||height="385" width="600"]]
265 265  
329 +(((
330 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
331 +)))
266 266  
333 +(((
334 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
335 +)))
267 267  
268 -=== 1.9.2  Connection ===
337 +(((
338 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
339 +)))
269 269  
270 -
271 -[[image:image-20220602101311-3.png||height="276" width="600"]]
272 -
273 -
274 274  (((
275 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
342 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
276 276  )))
277 277  
278 278  (((
279 -(% style="background-color:yellow" %)**GND  <-> GND
280 -TXD  <->  TXD
281 -RXD  <->  RXD**
346 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
282 282  )))
283 283  
284 284  
285 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
286 286  
287 -Connect USB TTL Adapter to PC after connecting the wires
351 +== 3.2  Features ==
288 288  
353 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
354 +* Ultra-long RF range
355 +* Support LoRaWAN v1.0.4 protocol
356 +* Support peer-to-peer protocol
357 +* TCXO crystal to ensure RF performance on low temperature
358 +* Spring RF antenna
359 +* Available in different frequency LoRaWAN frequency bands.
360 +* World-wide unique OTAA keys.
361 +* AT Command via UART-TTL interface
362 +* Firmware upgradable via UART interface
363 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
289 289  
290 -[[image:image-20220602102240-4.png||height="304" width="600"]]
291 291  
366 +== 3.3  Specification ==
292 292  
368 +* CPU: 32-bit 48 MHz
369 +* Flash: 256KB
370 +* RAM: 64KB
371 +* Input Power Range: 5v
372 +* Frequency Range: 150 MHz ~~ 960 MHz
373 +* Maximum Power +22 dBm constant RF output
374 +* High sensitivity: -148 dBm
375 +* Temperature:
376 +** Storage: -55 ~~ +125℃
377 +** Operating: -40 ~~ +85℃
378 +* Humidity:
379 +** Storage: 5 ~~ 95% (Non-Condensing)
380 +** Operating: 10 ~~ 95% (Non-Condensing)
381 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
382 +* LoRa Rx current: <9 mA
293 293  
294 -=== 1.9.3  Upgrade steps ===
295 295  
385 +== 3.4  Pin Mapping & LED ==
296 296  
297 297  
298 -==== (% style="color:blue" %)**1.  Switch SW1 to put in ISP position**(%%) ====
299 299  
389 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
300 300  
301 -[[image:image-20220602102824-5.png||height="306" width="600"]]
302 302  
392 +(((
393 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
394 +)))
303 303  
304 304  
397 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
305 305  
306 -==== (% style="color:blue" %)**2.  Press the RST switch once**(%%) ====
307 307  
400 +[[image:image-20220723100027-1.png]]
308 308  
309 -[[image:image-20220817085447-1.png]]
310 310  
403 +Open the serial port tool
311 311  
405 +[[image:image-20220602161617-8.png]]
312 312  
407 +[[image:image-20220602161718-9.png||height="457" width="800"]]
313 313  
314 -==== (% style="color:blue" %)**3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade**(%%) ====
315 315  
316 316  
411 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
317 317  
318 -(((
319 -(% style="color:blue" %)**1.  Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
320 -)))
413 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
321 321  
322 322  
323 -[[image:image-20220602103227-6.png]]
416 +[[image:image-20220602161935-10.png||height="498" width="800"]]
324 324  
325 325  
326 -[[image:image-20220602103357-7.png]]
327 327  
420 +(% style="color:blue" %)**3. See Uplink Command**
328 328  
422 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
329 329  
330 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
331 -(% style="color:blue" %)**2.  Select the COM port corresponding to USB TTL**
424 +example: AT+SENDB=01,02,8,05820802581ea0a5
332 332  
426 +[[image:image-20220602162157-11.png||height="497" width="800"]]
333 333  
334 -[[image:image-20220602103844-8.png]]
335 335  
336 336  
430 +(% style="color:blue" %)**4. Check to see if TTN received the message**
337 337  
338 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
339 -(% style="color:blue" %)**3.  Select the bin file to burn**
432 +[[image:image-20220602162331-12.png||height="420" width="800"]]
340 340  
341 341  
342 -[[image:image-20220602104144-9.png]]
343 343  
436 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
344 344  
345 -[[image:image-20220602104251-10.png]]
346 346  
439 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
347 347  
348 -[[image:image-20220602104402-11.png]]
441 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
349 349  
443 +(% style="color:red" %)**Preconditions:**
350 350  
445 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
351 351  
352 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
353 -(% style="color:blue" %)**4.  Click to start the download**
447 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
354 354  
355 355  
356 -[[image:image-20220602104923-13.png]]
357 357  
451 +(% style="color:blue" %)**Steps for usage:**
358 358  
453 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
359 359  
360 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
361 -(% style="color:blue" %)**5.  Check update process**
455 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
362 362  
457 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
363 363  
364 -[[image:image-20220602104948-14.png]]
365 365  
366 366  
461 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
367 367  
368 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
369 -(% style="color:blue" %)**The following picture shows that the burning is successful**
370 370  
464 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
371 371  
372 -[[image:image-20220602105251-15.png]]
373 373  
467 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
374 374  
469 +[[image:image-20220723100439-2.png]]
375 375  
376 -= 2.  FAQ =
377 377  
378 378  
379 -== 2.1  How to Compile Source Code for LA66? ==
473 +(% style="color:blue" %)**2. Install Minicom in RPi.**
380 380  
475 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
381 381  
382 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
477 + (% style="background-color:yellow" %)**apt update**
383 383  
479 + (% style="background-color:yellow" %)**apt install minicom**
384 384  
385 385  
386 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
482 +Use minicom to connect to the RPI's terminal
387 387  
484 +[[image:image-20220602153146-3.png||height="439" width="500"]]
388 388  
389 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:.Instruction for LA66 Peer to Peer firmware.WebHome]]
390 390  
391 391  
488 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
392 392  
393 -= 3.  Order Info =
490 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
394 394  
395 395  
396 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
493 +[[image:image-20220602154928-5.png||height="436" width="500"]]
397 397  
398 398  
399 -(% style="color:blue" %)**XXX**(%%): The default frequency band
400 400  
401 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
402 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
403 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
404 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
405 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
406 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
407 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
408 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
409 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
497 +(% style="color:blue" %)**4. Send Uplink message**
410 410  
499 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
411 411  
501 +example: AT+SENDB=01,02,8,05820802581ea0a5
412 412  
413 -= 4.  Reference =
414 414  
504 +[[image:image-20220602160339-6.png||height="517" width="600"]]
415 415  
416 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
417 417  
418 418  
508 +Check to see if TTN received the message
419 419  
420 -= 5.  FCC Statement =
510 +[[image:image-20220602160627-7.png||height="369" width="800"]]
421 421  
422 422  
423 -(% style="color:red" %)**FCC Caution:**
424 424  
425 -Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
514 +== 3.8  Example: Use of LA66 USB LoRaWAN Module and DRAGINO-LA66-APP. ==
426 426  
427 -This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
516 +=== 3.8.1 DRAGINO-LA66-APP ===
428 428  
518 +[[image:image-20220723102027-3.png]]
429 429  
430 -(% style="color:red" %)**IMPORTANT NOTE: **
520 +==== Overview： ====
431 431  
432 -(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
522 +DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Module. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Module.（DRAGINO-LA66-APP currently only supports Android system）
433 433  
434 -—Reorient or relocate the receiving antenna.
524 +==== Conditions of Use： ====
435 435  
436 -—Increase the separation between the equipment and receiver.
526 +Requires a type-c to USB adapter
437 437  
438 -—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
528 +[[image:image-20220723104754-4.png]]
439 439  
440 -—Consult the dealer or an experienced radio/TV technician for help.
530 +==== Use of APP: ====
441 441  
532 +LA66 USB LoRaWAN Module not connected
442 442  
443 -(% style="color:red" %)**FCC Radiation Exposure Statement: **
444 444  
445 -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. 
535 +
536 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
537 +
538 +
539 +
540 +
541 += 4.  Order Info =
542 +
543 +
544 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
545 +
546 +
547 +(% style="color:blue" %)**XXX**(%%): The default frequency band
548 +
549 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
550 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
551 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
552 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
553 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
554 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
555 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
556 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
557 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
558 +
559 += 5.  Reference =
560 +
561 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content
image-20220912084334-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912084352-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
image-20220912084412-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0