Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 165.4 >
edited by Xiaoling
on 2022/10/10 11:37
To version < 100.3 >
edited by Xiaoling
on 2022/07/19 11:41
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -6,15 +6,15 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 11  
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
15 -
16 16  (((
17 -[[image:image-20220715000826-2.png||height="145" width="220"]]
16 +(((
17 +[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 18  )))
19 19  
20 20  (((
... ... @@ -22,12 +22,13 @@
22 22  )))
23 23  
24 24  (((
25 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
25 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 26  )))
27 +)))
27 27  
28 28  (((
29 29  (((
30 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 31  )))
32 32  )))
33 33  
... ... @@ -35,10 +35,8 @@
35 35  (((
36 36  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 37  )))
38 -)))
39 39  
40 40  (((
41 -(((
42 42  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 43  )))
44 44  )))
... ... @@ -53,12 +53,10 @@
53 53  
54 54  == 1.2  Features ==
55 55  
56 -
57 -* Arduino Shield base on LA66 LoRaWAN module
58 -* Support LoRaWAN v1.0.3 protocol
55 +* Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 -* SMA connector
58 +* SMD Antenna pad and i-pex antenna connector
62 62  * Available in different frequency LoRaWAN frequency bands.
63 63  * World-wide unique OTAA keys.
64 64  * AT Command via UART-TTL interface
... ... @@ -65,9 +65,10 @@
65 65  * Firmware upgradable via UART interface
66 66  * Ultra-long RF range
67 67  
68 -== 1.3  Specification ==
69 69  
70 70  
67 +== 1.3  Specification ==
68 +
71 71  * CPU: 32-bit 48 MHz
72 72  * Flash: 256KB
73 73  * RAM: 64KB
... ... @@ -86,356 +86,459 @@
86 86  * LoRa Rx current: <9 mA
87 87  * I/O Voltage: 3.3v
88 88  
89 -== 1.4  Pin Mapping & LED ==
90 90  
91 91  
92 -[[image:image-20220817085048-1.png||height="533" width="734"]]
89 +== 1.4  AT Command ==
93 93  
94 94  
92 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
95 95  
96 -~1. The LED lights up red when there is an upstream data packet
97 -2. When the network is successfully connected, the green light will be on for 5 seconds
98 -3. Purple light on when receiving downlink data packets
99 99  
100 100  
101 -[[image:image-20220820112305-1.png||height="515" width="749"]]
96 +== 1.5  Dimension ==
102 102  
98 +[[image:image-20220718094750-3.png]]
103 103  
104 104  
105 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
106 106  
107 107  
108 -**Show connection diagram：**
103 +== 1.6  Pin Mapping ==
109 109  
110 110  
111 -[[image:image-20220723170210-2.png||height="908" width="681"]]
106 +[[image:image-20220719093156-1.png]]
112 112  
113 113  
114 114  
115 -(% style="color:blue" %)**1.  open Arduino IDE**
110 +== 1.7  Land Pattern ==
116 116  
112 +[[image:image-20220517072821-2.png]]
117 117  
118 -[[image:image-20220723170545-4.png]]
119 119  
120 120  
116 += 2.  LA66 LoRaWAN Shield =
121 121  
122 -(% style="color:blue" %)**2.  Open project**
123 123  
119 +== 2.1  Overview ==
124 124  
125 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
126 126  
122 +(((
123 +[[image:image-20220715000826-2.png||height="145" width="220"]]
124 +)))
127 127  
128 -[[image:image-20220726135239-1.png]]
126 +(((
127 +
128 +)))
129 129  
130 +(((
131 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
132 +)))
130 130  
134 +(((
135 +(((
136 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
137 +)))
138 +)))
131 131  
132 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
140 +(((
141 +(((
142 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
143 +)))
144 +)))
133 133  
146 +(((
147 +(((
148 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
149 +)))
150 +)))
134 134  
135 -[[image:image-20220726135356-2.png]]
152 +(((
153 +(((
154 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
155 +)))
156 +)))
136 136  
137 137  
138 138  
139 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
160 +== 2.2  Features ==
140 140  
162 +* Arduino Shield base on LA66 LoRaWAN module
163 +* Support LoRaWAN v1.0.4 protocol
164 +* Support peer-to-peer protocol
165 +* TCXO crystal to ensure RF performance on low temperature
166 +* SMA connector
167 +* Available in different frequency LoRaWAN frequency bands.
168 +* World-wide unique OTAA keys.
169 +* AT Command via UART-TTL interface
170 +* Firmware upgradable via UART interface
171 +* Ultra-long RF range
141 141  
142 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
143 143  
144 144  
175 +== 2.3  Specification ==
145 145  
146 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
177 +* CPU: 32-bit 48 MHz
178 +* Flash: 256KB
179 +* RAM: 64KB
180 +* Input Power Range: 1.8v ~~ 3.7v
181 +* Power Consumption: < 4uA.
182 +* Frequency Range: 150 MHz ~~ 960 MHz
183 +* Maximum Power +22 dBm constant RF output
184 +* High sensitivity: -148 dBm
185 +* Temperature:
186 +** Storage: -55 ~~ +125℃
187 +** Operating: -40 ~~ +85℃
188 +* Humidity:
189 +** Storage: 5 ~~ 95% (Non-Condensing)
190 +** Operating: 10 ~~ 95% (Non-Condensing)
191 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
192 +* LoRa Rx current: <9 mA
193 +* I/O Voltage: 3.3v
147 147  
148 148  
149 -(% style="color:blue" %)**1.  Open project**
150 150  
197 +== 2.4  Pin Mapping & LED ==
151 151  
152 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
153 153  
154 154  
155 -[[image:image-20220723172502-8.png]]
201 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
156 156  
157 157  
158 158  
159 -(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
205 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
160 160  
161 161  
162 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
163 163  
209 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
164 164  
165 165  
166 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
167 167  
213 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
168 168  
169 -(% style="color:blue" %)**1.  Open project**
170 170  
216 +=== 2.8.1  Items needed for update ===
171 171  
172 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
218 +1. LA66 LoRaWAN Shield
219 +1. Arduino
220 +1. USB TO TTL Adapter
173 173  
174 174  
175 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
176 176  
224 +[[image:image-20220602100052-2.png||height="385" width="600"]]
177 177  
178 178  
179 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
227 +=== 2.8.2  Connection ===
180 180  
181 181  
182 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
230 +[[image:image-20220602101311-3.png||height="276" width="600"]]
183 183  
184 184  
233 +(((
234 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
235 +)))
185 185  
237 +(((
238 +(% style="background-color:yellow" %)**GND  <-> GND
239 +TXD  <->  TXD
240 +RXD  <->  RXD**
241 +)))
186 186  
187 187  
188 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
244 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
189 189  
246 +Connect USB TTL Adapter to PC after connecting the wires
190 190  
191 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
192 192  
249 +[[image:image-20220602102240-4.png||height="304" width="600"]]
193 193  
194 -[[image:image-20220723175700-12.png||height="602" width="995"]]
195 195  
252 +=== 2.8.3  Upgrade steps ===
196 196  
197 197  
198 -== 1.8  Example: How to join helium ==
255 +==== 1.  Switch SW1 to put in ISP position ====
199 199  
200 200  
201 -(% style="color:blue" %)**1.  Create a new device.**
258 +[[image:image-20220602102824-5.png||height="306" width="600"]]
202 202  
203 203  
204 -[[image:image-20220907165500-1.png||height="464" width="940"]]
205 205  
262 +==== 2.  Press the RST switch once ====
206 206  
207 207  
208 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
265 +[[image:image-20220602104701-12.png||height="285" width="600"]]
209 209  
210 210  
211 -[[image:image-20220907165837-2.png||height="375" width="809"]]
212 212  
269 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
213 213  
214 214  
215 -(% style="color:blue" %)**3.  Use AT commands.**
272 +(((
273 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
274 +)))
216 216  
217 217  
218 -[[image:image-20220602100052-2.png||height="385" width="600"]]
277 +[[image:image-20220602103227-6.png]]
219 219  
220 220  
280 +[[image:image-20220602103357-7.png]]
221 221  
222 -(% style="color:#0000ff" %)**4.  Use command AT+CFG to get device configuration**
223 223  
224 224  
225 -[[image:image-20220907170308-3.png||height="556" width="617"]]
284 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
285 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
226 226  
227 227  
288 +[[image:image-20220602103844-8.png]]
228 228  
229 -(% style="color:blue" %)**5.  Network successfully.**
230 230  
231 231  
232 -[[image:image-20220907170436-4.png]]
292 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
293 +(% style="color:blue" %)**3. Select the bin file to burn**
233 233  
234 234  
296 +[[image:image-20220602104144-9.png]]
235 235  
236 -(% style="color:blue" %)**6.  Send uplink using command**
237 237  
299 +[[image:image-20220602104251-10.png]]
238 238  
239 -[[image:image-20220912084334-1.png]]
240 240  
302 +[[image:image-20220602104402-11.png]]
241 241  
242 -[[image:image-20220912084412-3.png]]
243 243  
244 244  
306 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
307 +(% style="color:blue" %)**4. Click to start the download**
245 245  
246 -[[image:image-20220907170744-6.png||height="242" width="798"]]
309 +[[image:image-20220602104923-13.png]]
247 247  
248 248  
249 249  
250 -== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
313 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
314 +(% style="color:blue" %)**5. Check update process**
251 251  
252 252  
253 -=== 1.9.1  Items needed for update ===
317 +[[image:image-20220602104948-14.png]]
254 254  
255 255  
256 -1. LA66 LoRaWAN Shield
257 -1. Arduino
258 -1. USB TO TTL Adapter
259 259  
260 -[[image:image-20220602100052-2.png||height="385" width="600"]]
321 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
322 +(% style="color:blue" %)**The following picture shows that the burning is successful**
261 261  
324 +[[image:image-20220602105251-15.png]]
262 262  
263 263  
264 -=== 1.9.2  Connection ===
265 265  
328 += 3.  LA66 USB LoRaWAN Adapter =
266 266  
267 -[[image:image-20220602101311-3.png||height="276" width="600"]]
268 268  
331 +== 3.1  Overview ==
269 269  
270 -(((
271 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
272 -)))
273 273  
274 -(((
275 -(% style="background-color:yellow" %)**GND  <-> GND
276 -TXD  <->  TXD
277 -RXD  <->  RXD**
278 -)))
334 +[[image:image-20220715001142-3.png||height="145" width="220"]]
279 279  
280 280  
281 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
337 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
282 282  
283 -Connect USB TTL Adapter to PC after connecting the wires
339 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
284 284  
341 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
285 285  
286 -[[image:image-20220602102240-4.png||height="304" width="600"]]
343 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
287 287  
345 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
288 288  
289 289  
290 -=== 1.9.3  Upgrade steps ===
291 291  
349 +== 3.2  Features ==
292 292  
351 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
352 +* Ultra-long RF range
353 +* Support LoRaWAN v1.0.4 protocol
354 +* Support peer-to-peer protocol
355 +* TCXO crystal to ensure RF performance on low temperature
356 +* Spring RF antenna
357 +* Available in different frequency LoRaWAN frequency bands.
358 +* World-wide unique OTAA keys.
359 +* AT Command via UART-TTL interface
360 +* Firmware upgradable via UART interface
361 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
293 293  
294 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
295 295  
296 296  
297 -[[image:image-20220602102824-5.png||height="306" width="600"]]
365 +== 3.3  Specification ==
298 298  
367 +* CPU: 32-bit 48 MHz
368 +* Flash: 256KB
369 +* RAM: 64KB
370 +* Input Power Range: 5v
371 +* Frequency Range: 150 MHz ~~ 960 MHz
372 +* Maximum Power +22 dBm constant RF output
373 +* High sensitivity: -148 dBm
374 +* Temperature:
375 +** Storage: -55 ~~ +125℃
376 +** Operating: -40 ~~ +85℃
377 +* Humidity:
378 +** Storage: 5 ~~ 95% (Non-Condensing)
379 +** Operating: 10 ~~ 95% (Non-Condensing)
380 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
381 +* LoRa Rx current: <9 mA
299 299  
300 300  
301 301  
302 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
385 +== 3.4  Pin Mapping & LED ==
303 303  
304 304  
305 -[[image:image-20220817085447-1.png]]
306 306  
389 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
307 307  
308 308  
392 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
309 309  
310 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
311 311  
395 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
312 312  
313 313  
314 -(((
315 -(% style="color:blue" %)**1.  Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
316 -)))
398 +[[image:image-20220602171217-1.png||height="538" width="800"]]
317 317  
318 318  
319 -[[image:image-20220602103227-6.png]]
401 +Open the serial port tool
320 320  
403 +[[image:image-20220602161617-8.png]]
321 321  
322 -[[image:image-20220602103357-7.png]]
405 +[[image:image-20220602161718-9.png||height="457" width="800"]]
323 323  
324 324  
325 325  
326 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
327 -(% style="color:blue" %)**2.  Select the COM port corresponding to USB TTL**
409 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
328 328  
411 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
329 329  
330 -[[image:image-20220602103844-8.png]]
331 331  
414 +[[image:image-20220602161935-10.png||height="498" width="800"]]
332 332  
333 333  
334 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
335 -(% style="color:blue" %)**3.  Select the bin file to burn**
336 336  
418 +(% style="color:blue" %)**3. See Uplink Command**
337 337  
338 -[[image:image-20220602104144-9.png]]
420 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
339 339  
422 +example: AT+SENDB=01,02,8,05820802581ea0a5
340 340  
341 -[[image:image-20220602104251-10.png]]
424 +[[image:image-20220602162157-11.png||height="497" width="800"]]
342 342  
343 343  
344 -[[image:image-20220602104402-11.png]]
345 345  
428 +(% style="color:blue" %)**4. Check to see if TTN received the message**
346 346  
430 +[[image:image-20220602162331-12.png||height="420" width="800"]]
347 347  
348 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
349 -(% style="color:blue" %)**4.  Click to start the download**
350 350  
351 351  
352 -[[image:image-20220602104923-13.png]]
434 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
353 353  
354 354  
437 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
355 355  
356 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
357 -(% style="color:blue" %)**5.  Check update process**
358 358  
440 +(% style="color:red" %)**Preconditions:**
359 359  
360 -[[image:image-20220602104948-14.png]]
442 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
361 361  
444 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
362 362  
363 363  
364 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
365 -(% style="color:blue" %)**The following picture shows that the burning is successful**
366 366  
448 +(% style="color:blue" %)**Steps for usage:**
367 367  
368 -[[image:image-20220602105251-15.png]]
450 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
369 369  
452 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
370 370  
454 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
371 371  
372 -= 2.  FAQ =
373 373  
374 374  
375 -== 2.1  How to Compile Source Code for LA66? ==
458 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
376 376  
377 377  
378 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
461 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
379 379  
380 380  
464 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
381 381  
382 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
466 +[[image:image-20220602171233-2.png||height="538" width="800"]]
383 383  
384 384  
385 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:.Instruction for LA66 Peer to Peer firmware.WebHome]]
386 386  
470 +(% style="color:blue" %)**2. Install Minicom in RPi.**
387 387  
472 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
388 388  
389 -= 3.  Order Info =
474 + (% style="background-color:yellow" %)**apt update**
390 390  
476 + (% style="background-color:yellow" %)**apt install minicom**
391 391  
392 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
393 393  
479 +Use minicom to connect to the RPI's terminal
394 394  
395 -(% style="color:blue" %)**XXX**(%%): The default frequency band
481 +[[image:image-20220602153146-3.png||height="439" width="500"]]
396 396  
397 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
398 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
399 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
400 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
401 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
402 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
403 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
404 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
405 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
406 406  
407 407  
485 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
408 408  
409 -= 4.  Reference =
487 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
410 410  
411 411  
412 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
490 +[[image:image-20220602154928-5.png||height="436" width="500"]]
413 413  
414 414  
415 415  
416 -= 5.  FCC Statement =
494 +(% style="color:blue" %)**4. Send Uplink message**
417 417  
496 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
418 418  
419 -(% style="color:red" %)**FCC Caution:**
498 +example: AT+SENDB=01,02,8,05820802581ea0a5
420 420  
421 -Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
422 422  
423 -This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
501 +[[image:image-20220602160339-6.png||height="517" width="600"]]
424 424  
425 425  
426 -(% style="color:red" %)**IMPORTANT NOTE: **
427 427  
428 -(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
505 +Check to see if TTN received the message
429 429  
430 -—Reorient or relocate the receiving antenna.
507 +[[image:image-20220602160627-7.png||height="369" width="800"]]
431 431  
432 -—Increase the separation between the equipment and receiver.
433 433  
434 -—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
435 435  
436 -—Consult the dealer or an experienced radio/TV technician for help.
511 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
437 437  
438 438  
439 -(% style="color:red" %)**FCC Radiation Exposure Statement: **
440 440  
441 -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. 
515 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
516 +
517 +
518 +
519 +
520 += 4.  Order Info =
521 +
522 +
523 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
524 +
525 +
526 +(% style="color:blue" %)**XXX**(%%): The default frequency band
527 +
528 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
529 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
530 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
531 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
532 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
533 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
534 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
535 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
536 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
537 +
538 +
539 +
540 += 5.  Reference =
541 +
542 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content
image-20220912084334-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912084352-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
image-20220912084412-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0