Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 165.2 >
edited by Xiaoling
on 2022/09/26 14:36
To version < 87.15 >
edited by Xiaoling
on 2022/07/13 10:09
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -6,59 +6,39 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 11  
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
15 -
16 16  (((
17 -[[image:image-20220715000826-2.png||height="145" width="220"]]
16 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
18 18  )))
19 19  
20 20  (((
21 -
20 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
22 22  )))
23 23  
24 24  (((
25 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 -)))
27 -
28 -(((
29 -(((
30 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 -)))
32 -)))
33 -
34 -(((
35 -(((
36 36  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 37  )))
38 -)))
39 39  
40 40  (((
41 -(((
42 42  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 43  )))
44 -)))
45 45  
46 46  (((
47 -(((
48 48  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
49 49  )))
50 -)))
51 51  
52 52  
53 -
54 54  == 1.2  Features ==
55 55  
56 -
57 -* Arduino Shield base on LA66 LoRaWAN module
58 -* Support LoRaWAN v1.0.3 protocol
38 +* Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 -* SMA connector
41 +* SMD Antenna pad and i-pex antenna connector
62 62  * Available in different frequency LoRaWAN frequency bands.
63 63  * World-wide unique OTAA keys.
64 64  * AT Command via UART-TTL interface
... ... @@ -65,9 +65,10 @@
65 65  * Firmware upgradable via UART interface
66 66  * Ultra-long RF range
67 67  
68 -== 1.3  Specification ==
69 69  
70 70  
50 +== 1.3  Specification ==
51 +
71 71  * CPU: 32-bit 48 MHz
72 72  * Flash: 256KB
73 73  * RAM: 64KB
... ... @@ -86,312 +86,387 @@
86 86  * LoRa Rx current: <9 mA
87 87  * I/O Voltage: 3.3v
88 88  
89 -== 1.4  Pin Mapping & LED ==
90 90  
91 91  
92 -[[image:image-20220817085048-1.png||height="533" width="734"]]
72 +== 1.4  AT Command ==
93 93  
74 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
94 94  
95 95  
96 -~1. The LED lights up red when there is an upstream data packet
97 -2. When the network is successfully connected, the green light will be on for 5 seconds
98 -3. Purple light on when receiving downlink data packets
77 +== 1.5  Dimension ==
99 99  
79 +[[image:image-20220517072526-1.png]]
100 100  
101 -[[image:image-20220820112305-1.png||height="515" width="749"]]
102 102  
103 103  
83 +== 1.6  Pin Mapping ==
104 104  
105 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
106 106  
86 +[[image:image-20220523101537-1.png]]
107 107  
108 -**Show connection diagram：**
109 109  
110 110  
111 -[[image:image-20220723170210-2.png||height="908" width="681"]]
90 +== 1.7  Land Pattern ==
112 112  
92 +[[image:image-20220517072821-2.png]]
113 113  
114 114  
115 -(% style="color:blue" %)**1.  open Arduino IDE**
116 116  
96 += 2.  LA66 LoRaWAN Shield =
117 117  
118 -[[image:image-20220723170545-4.png]]
119 119  
99 +== 2.1  Overview ==
120 120  
101 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
121 121  
122 -(% style="color:blue" %)**2.  Open project**
123 123  
104 +== 2.2  Features ==
124 124  
125 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
106 +* Arduino Shield base on LA66 LoRaWAN module
107 +* Support LoRaWAN v1.0.4 protocol
108 +* Support peer-to-peer protocol
109 +* TCXO crystal to ensure RF performance on low temperature
110 +* SMA connector
111 +* Available in different frequency LoRaWAN frequency bands.
112 +* World-wide unique OTAA keys.
113 +* AT Command via UART-TTL interface
114 +* Firmware upgradable via UART interface
115 +* Ultra-long RF range
126 126  
127 127  
128 -[[image:image-20220726135239-1.png]]
129 129  
119 +== 2.3  Specification ==
130 130  
121 +* CPU: 32-bit 48 MHz
122 +* Flash: 256KB
123 +* RAM: 64KB
124 +* Input Power Range: 1.8v ~~ 3.7v
125 +* Power Consumption: < 4uA.
126 +* Frequency Range: 150 MHz ~~ 960 MHz
127 +* Maximum Power +22 dBm constant RF output
128 +* High sensitivity: -148 dBm
129 +* Temperature:
130 +** Storage: -55 ~~ +125℃
131 +** Operating: -40 ~~ +85℃
132 +* Humidity:
133 +** Storage: 5 ~~ 95% (Non-Condensing)
134 +** Operating: 10 ~~ 95% (Non-Condensing)
135 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
136 +* LoRa Rx current: <9 mA
137 +* I/O Voltage: 3.3v
131 131  
132 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
133 133  
134 134  
135 -[[image:image-20220726135356-2.png]]
141 +== 2.4  Pin Mapping & LED ==
136 136  
137 137  
138 138  
139 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
145 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
140 140  
141 141  
142 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
143 143  
149 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
144 144  
145 145  
146 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
147 147  
153 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
148 148  
149 -(% style="color:blue" %)**1.  Open project**
150 150  
151 151  
152 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
157 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
153 153  
154 154  
155 -[[image:image-20220723172502-8.png]]
160 +=== 2.8.1  Items needed for update ===
156 156  
162 +1. LA66 LoRaWAN Shield
163 +1. Arduino
164 +1. USB TO TTL Adapter
157 157  
158 158  
159 -(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
160 160  
161 161  
162 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
169 +[[image:image-20220602100052-2.png||height="385" width="600"]]
163 163  
164 164  
172 +=== 2.8.2  Connection ===
165 165  
166 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
167 167  
175 +[[image:image-20220602101311-3.png||height="276" width="600"]]
168 168  
169 -(% style="color:blue" %)**1.  Open project**
170 170  
178 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
171 171  
172 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
180 +(% style="background-color:yellow" %)**GND  <-> GND
181 +TXD  <->  TXD
182 +RXD  <->  RXD**
173 173  
174 174  
175 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
185 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
176 176  
187 +Connect USB TTL Adapter to PC after connecting the wires
177 177  
178 178  
179 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
190 +[[image:image-20220602102240-4.png||height="304" width="600"]]
180 180  
181 181  
182 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
193 +=== 2.8.3  Upgrade steps ===
183 183  
184 184  
196 +==== 1.  Switch SW1 to put in ISP position ====
185 185  
186 186  
199 +[[image:image-20220602102824-5.png||height="306" width="600"]]
187 187  
188 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
189 189  
190 190  
191 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
203 +==== 2.  Press the RST switch once ====
192 192  
193 193  
194 -[[image:image-20220723175700-12.png||height="602" width="995"]]
206 +[[image:image-20220602104701-12.png||height="285" width="600"]]
195 195  
196 196  
197 197  
198 -== 1.8  Example: How to join helium ==
210 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
199 199  
200 200  
201 -(% style="color:blue" %)**1.  Create a new device.**
213 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
202 202  
203 203  
204 -[[image:image-20220907165500-1.png||height="464" width="940"]]
216 +[[image:image-20220602103227-6.png]]
205 205  
206 206  
219 +[[image:image-20220602103357-7.png]]
207 207  
208 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
209 209  
210 210  
211 -[[image:image-20220907165837-2.png||height="375" width="809"]]
223 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
224 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
212 212  
213 213  
227 +[[image:image-20220602103844-8.png]]
214 214  
215 -(% style="color:blue" %)**3.  Use AT commands.**
216 216  
217 217  
218 -[[image:image-20220602100052-2.png||height="385" width="600"]]
231 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
232 +(% style="color:blue" %)**3. Select the bin file to burn**
219 219  
220 220  
235 +[[image:image-20220602104144-9.png]]
221 221  
222 -(% style="color:#0000ff" %)**4.  Use command AT+CFG to get device configuration**
223 223  
238 +[[image:image-20220602104251-10.png]]
224 224  
225 -[[image:image-20220907170308-3.png||height="556" width="617"]]
226 226  
241 +[[image:image-20220602104402-11.png]]
227 227  
228 228  
229 -(% style="color:blue" %)**5.  Network successfully.**
230 230  
245 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
246 +(% style="color:blue" %)**4. Click to start the download**
231 231  
232 -[[image:image-20220907170436-4.png]]
248 +[[image:image-20220602104923-13.png]]
233 233  
234 234  
235 235  
236 -(% style="color:blue" %)**6.  Send uplink using command**
252 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
253 +(% style="color:blue" %)**5. Check update process**
237 237  
238 238  
239 -[[image:image-20220912084334-1.png]]
256 +[[image:image-20220602104948-14.png]]
240 240  
241 241  
242 -[[image:image-20220912084412-3.png]]
243 243  
260 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
261 +(% style="color:blue" %)**The following picture shows that the burning is successful**
244 244  
263 +[[image:image-20220602105251-15.png]]
245 245  
246 -[[image:image-20220907170744-6.png||height="242" width="798"]]
247 247  
248 248  
267 += 3.  LA66 USB LoRaWAN Adapter =
249 249  
250 -== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
251 251  
270 +== 3.1  Overview ==
252 252  
253 -=== 1.9.1  Items needed for update ===
272 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
254 254  
255 255  
256 -1. LA66 LoRaWAN Shield
257 -1. Arduino
258 -1. USB TO TTL Adapter
275 +== 3.2  Features ==
259 259  
260 -[[image:image-20220602100052-2.png||height="385" width="600"]]
277 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
278 +* Ultra-long RF range
279 +* Support LoRaWAN v1.0.4 protocol
280 +* Support peer-to-peer protocol
281 +* TCXO crystal to ensure RF performance on low temperature
282 +* Spring RF antenna
283 +* Available in different frequency LoRaWAN frequency bands.
284 +* World-wide unique OTAA keys.
285 +* AT Command via UART-TTL interface
286 +* Firmware upgradable via UART interface
261 261  
262 262  
263 263  
264 -=== 1.9.2  Connection ===
290 +== 3.3  Specification ==
265 265  
292 +* CPU: 32-bit 48 MHz
293 +* Flash: 256KB
294 +* RAM: 64KB
295 +* Input Power Range: 5v
296 +* Frequency Range: 150 MHz ~~ 960 MHz
297 +* Maximum Power +22 dBm constant RF output
298 +* High sensitivity: -148 dBm
299 +* Temperature:
300 +** Storage: -55 ~~ +125℃
301 +** Operating: -40 ~~ +85℃
302 +* Humidity:
303 +** Storage: 5 ~~ 95% (Non-Condensing)
304 +** Operating: 10 ~~ 95% (Non-Condensing)
305 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
306 +* LoRa Rx current: <9 mA
266 266  
267 -[[image:image-20220602101311-3.png||height="276" width="600"]]
268 268  
269 269  
270 -(((
271 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
272 -)))
310 +== 3.4  Pin Mapping & LED ==
273 273  
274 -(((
275 -(% style="background-color:yellow" %)**GND  <-> GND
276 -TXD  <->  TXD
277 -RXD  <->  RXD**
278 -)))
279 279  
280 280  
281 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
314 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
282 282  
283 -Connect USB TTL Adapter to PC after connecting the wires
284 284  
317 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
285 285  
286 -[[image:image-20220602102240-4.png||height="304" width="600"]]
287 287  
320 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
288 288  
289 289  
290 -=== 1.9.3  Upgrade steps ===
323 +[[image:image-20220602171217-1.png||height="538" width="800"]]
291 291  
292 292  
326 +Open the serial port tool
293 293  
294 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
328 +[[image:image-20220602161617-8.png]]
295 295  
330 +[[image:image-20220602161718-9.png||height="457" width="800"]]
296 296  
297 -[[image:image-20220602102824-5.png||height="306" width="600"]]
298 298  
299 299  
334 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
300 300  
336 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
301 301  
302 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
303 303  
339 +[[image:image-20220602161935-10.png||height="498" width="800"]]
304 304  
305 -[[image:image-20220817085447-1.png]]
306 306  
307 307  
343 +(% style="color:blue" %)**3. See Uplink Command**
308 308  
345 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
309 309  
310 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
347 +example: AT+SENDB=01,02,8,05820802581ea0a5
311 311  
349 +[[image:image-20220602162157-11.png||height="497" width="800"]]
312 312  
313 313  
314 -(((
315 -(% style="color:blue" %)**1.  Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
316 -)))
317 317  
353 +(% style="color:blue" %)**4. Check to see if TTN received the message**
318 318  
319 -[[image:image-20220602103227-6.png]]
355 +[[image:image-20220602162331-12.png||height="420" width="800"]]
320 320  
321 321  
322 -[[image:image-20220602103357-7.png]]
323 323  
359 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
324 324  
325 325  
326 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
327 -(% style="color:blue" %)**2.  Select the COM port corresponding to USB TTL**
362 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
328 328  
329 329  
330 -[[image:image-20220602103844-8.png]]
365 +(% style="color:red" %)**Preconditions:**
331 331  
367 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
332 332  
369 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
333 333  
334 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
335 -(% style="color:blue" %)**3.  Select the bin file to burn**
336 336  
337 337  
338 -[[image:image-20220602104144-9.png]]
373 +(% style="color:blue" %)**Steps for usage:**
339 339  
375 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
340 340  
341 -[[image:image-20220602104251-10.png]]
377 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
342 342  
379 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
343 343  
344 -[[image:image-20220602104402-11.png]]
345 345  
346 346  
383 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
347 347  
348 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
349 -(% style="color:blue" %)**4.  Click to start the download**
350 350  
386 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
351 351  
352 -[[image:image-20220602104923-13.png]]
353 353  
389 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
354 354  
391 +[[image:image-20220602171233-2.png||height="538" width="800"]]
355 355  
356 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
357 -(% style="color:blue" %)**5.  Check update process**
358 358  
359 359  
360 -[[image:image-20220602104948-14.png]]
395 +(% style="color:blue" %)**2. Install Minicom in RPi.**
361 361  
397 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
362 362  
399 + (% style="background-color:yellow" %)**apt update**
363 363  
364 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
365 -(% style="color:blue" %)**The following picture shows that the burning is successful**
401 + (% style="background-color:yellow" %)**apt install minicom**
366 366  
367 367  
368 -[[image:image-20220602105251-15.png]]
404 +Use minicom to connect to the RPI's terminal
369 369  
406 +[[image:image-20220602153146-3.png||height="439" width="500"]]
370 370  
371 371  
372 -= 2.  FAQ =
373 373  
410 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
374 374  
375 -== 2.1  How to Compile Source Code for LA66? ==
412 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
376 376  
377 377  
378 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
415 +[[image:image-20220602154928-5.png||height="436" width="500"]]
379 379  
380 380  
381 381  
382 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
419 +(% style="color:blue" %)**4. Send Uplink message**
383 383  
421 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
384 384  
385 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:.Instruction for LA66 Peer to Peer firmware.WebHome]]
423 +example: AT+SENDB=01,02,8,05820802581ea0a5
386 386  
387 387  
426 +[[image:image-20220602160339-6.png||height="517" width="600"]]
388 388  
389 -= 3.  Order Info =
390 390  
391 391  
392 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
430 +Check to see if TTN received the message
393 393  
432 +[[image:image-20220602160627-7.png||height="369" width="800"]]
394 394  
434 +
435 +
436 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
437 +
438 +
439 +
440 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
441 +
442 +
443 +
444 +
445 += 4.  Order Info =
446 +
447 +
448 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
449 +
450 +
395 395  (% style="color:blue" %)**XXX**(%%): The default frequency band
396 396  
397 397  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -404,9 +404,10 @@
404 404  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
405 405  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
406 406  
407 -= 4.  Reference =
408 408  
409 409  
410 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
465 += 5.  Reference =
411 411  
467 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
468 +
412 412  
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content
image-20220912084334-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912084352-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
image-20220912084412-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0