Last modified by Xiaoling on 2023/05/26 14:19

From version 165.2
edited by Xiaoling
on 2022/09/26 14:36
Change comment: There is no comment for this version
To version 75.1
edited by Edwin Chen
on 2022/07/03 00:21
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,64 +1,28 @@
1 -
2 -
3 -**Table of Contents:**
4 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
5 5  {{toc/}}
3 +{{/box}}
6 6  
5 += LA66 LoRaWAN Module =
7 7  
7 +== What is LA66 LoRaWAN Module ==
8 8  
9 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
11 11  
12 -
13 -== 1.1  Overview ==
14 -
15 -
16 -(((
17 -[[image:image-20220715000826-2.png||height="145" width="220"]]
18 -)))
19 -
20 -(((
21 -
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 -)))
27 -
28 -(((
29 -(((
30 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 -)))
32 -)))
33 -
34 -(((
35 -(((
36 36  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 -)))
38 -)))
39 39  
40 -(((
41 -(((
42 42  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 -)))
44 -)))
45 45  
46 -(((
47 -(((
48 48  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
49 -)))
50 -)))
51 51  
52 52  
20 +== Features ==
53 53  
54 -== 1.2  Features ==
55 -
56 -
57 -* Arduino Shield base on LA66 LoRaWAN module
58 -* Support LoRaWAN v1.0.3 protocol
22 +* Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 -* SMA connector
25 +* SMD Antenna pad and i-pex antenna connector
62 62  * Available in different frequency LoRaWAN frequency bands.
63 63  * World-wide unique OTAA keys.
64 64  * AT Command via UART-TTL interface
... ... @@ -65,9 +65,8 @@
65 65  * Firmware upgradable via UART interface
66 66  * Ultra-long RF range
67 67  
68 -== 1.3  Specification ==
32 +== Specification ==
69 69  
70 -
71 71  * CPU: 32-bit 48 MHz
72 72  * Flash: 256KB
73 73  * RAM: 64KB
... ... @@ -86,327 +86,334 @@
86 86  * LoRa Rx current: <9 mA
87 87  * I/O Voltage: 3.3v
88 88  
89 -== 1.4  Pin Mapping & LED ==
52 +== AT Command ==
90 90  
54 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
91 91  
92 -[[image:image-20220817085048-1.png||height="533" width="734"]]
93 93  
57 +== Dimension ==
94 94  
59 +[[image:image-20220517072526-1.png]]
95 95  
96 -~1. The LED lights up red when there is an upstream data packet
97 -2. When the network is successfully connected, the green light will be on for 5 seconds
98 -3. Purple light on when receiving downlink data packets
99 99  
62 +== Pin Mapping ==
100 100  
101 -[[image:image-20220820112305-1.png||height="515" width="749"]]
64 +[[image:image-20220523101537-1.png]]
102 102  
66 +== Land Pattern ==
103 103  
68 +[[image:image-20220517072821-2.png]]
104 104  
105 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
106 106  
71 +== Order Info ==
107 107  
108 -**Show connection diagram**
73 +Part Number: **LA66-XXX**
109 109  
75 +**XX**: The default frequency band
110 110  
111 -[[image:image-20220723170210-2.png||height="908" width="681"]]
77 +* **AS923**: LoRaWAN AS923 band
78 +* **AU915**: LoRaWAN AU915 band
79 +* **EU433**: LoRaWAN EU433 band
80 +* **EU868**: LoRaWAN EU868 band
81 +* **KR920**: LoRaWAN KR920 band
82 +* **US915**: LoRaWAN US915 band
83 +* **IN865**: LoRaWAN IN865 band
84 +* **CN470**: LoRaWAN CN470 band
85 +* **PP**: Peer to Peer LoRa Protocol
112 112  
87 += LA66 LoRaWAN Shield =
113 113  
89 +== Overview ==
114 114  
115 -(% style="color:blue" %)**1.  open Arduino IDE**
91 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
116 116  
117 117  
118 -[[image:image-20220723170545-4.png]]
94 +== Features ==
119 119  
96 +* Arduino Shield base on LA66 LoRaWAN module
97 +* Support LoRaWAN v1.0.4 protocol
98 +* Support peer-to-peer protocol
99 +* TCXO crystal to ensure RF performance on low temperature
100 +* SMA connector
101 +* Available in different frequency LoRaWAN frequency bands.
102 +* World-wide unique OTAA keys.
103 +* AT Command via UART-TTL interface
104 +* Firmware upgradable via UART interface
105 +* Ultra-long RF range
120 120  
107 +== Specification ==
121 121  
122 -(% style="color:blue" %)**2.  Open project**
109 +* CPU: 32-bit 48 MHz
110 +* Flash: 256KB
111 +* RAM: 64KB
112 +* Input Power Range: 1.8v ~~ 3.7v
113 +* Power Consumption: < 4uA.
114 +* Frequency Range: 150 MHz ~~ 960 MHz
115 +* Maximum Power +22 dBm constant RF output
116 +* High sensitivity: -148 dBm
117 +* Temperature:
118 +** Storage: -55 ~~ +125℃
119 +** Operating: -40 ~~ +85℃
120 +* Humidity:
121 +** Storage: 5 ~~ 95% (Non-Condensing)
122 +** Operating: 10 ~~ 95% (Non-Condensing)
123 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
124 +* LoRa Rx current: <9 mA
125 +* I/O Voltage: 3.3v
123 123  
127 +== Pin Mapping & LED ==
124 124  
125 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
129 +== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
126 126  
131 +== Example: Join TTN network and send an uplink message, get downlink message. ==
127 127  
128 -[[image:image-20220726135239-1.png]]
133 +== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
129 129  
135 +== Upgrade Firmware of LA66 LoRaWAN Shield ==
130 130  
137 +=== Items needed for update ===
131 131  
132 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
139 +1. LA66 LoRaWAN Shield
140 +1. Arduino
141 +1. USB TO TTL Adapter
133 133  
134 -
135 -[[image:image-20220726135356-2.png]]
136 -
137 -
138 -
139 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
140 -
141 -
142 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
143 -
144 -
145 -
146 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
147 -
148 -
149 -(% style="color:blue" %)**1.  Open project**
150 -
151 -
152 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
153 -
154 -
155 -[[image:image-20220723172502-8.png]]
156 -
157 -
158 -
159 -(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
160 -
161 -
162 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
163 -
164 -
165 -
166 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
167 -
168 -
169 -(% style="color:blue" %)**1.  Open project**
170 -
171 -
172 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
173 -
174 -
175 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
176 -
177 -
178 -
179 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
180 -
181 -
182 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
183 -
184 -
185 -
186 -
187 -
188 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
189 -
190 -
191 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
192 -
193 -
194 -[[image:image-20220723175700-12.png||height="602" width="995"]]
195 -
196 -
197 -
198 -== 1.8  Example: How to join helium ==
199 -
200 -
201 -(% style="color:blue" %)**1.  Create a new device.**
202 -
203 -
204 -[[image:image-20220907165500-1.png||height="464" width="940"]]
205 -
206 -
207 -
208 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
209 -
210 -
211 -[[image:image-20220907165837-2.png||height="375" width="809"]]
212 -
213 -
214 -
215 -(% style="color:blue" %)**3.  Use AT commands.**
216 -
217 -
218 218  [[image:image-20220602100052-2.png||height="385" width="600"]]
219 219  
220 220  
146 +=== Connection ===
221 221  
222 -(% style="color:#0000ff" %)**4.  Use command AT+CFG to get device configuration**
148 +[[image:image-20220602101311-3.png||height="276" width="600"]]
223 223  
150 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
151 +**GND  <-> GND
152 +TXD  <-> TXD
153 +RXD  <-> RXD**
224 224  
225 -[[image:image-20220907170308-3.png||height="556" width="617"]]
155 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield.
226 226  
157 +Connect USB TTL Adapter to PC after connecting the wires
227 227  
228 228  
229 -(% style="color:blue" %)**5.  Network successfully.**
160 +[[image:image-20220602102240-4.png||height="304" width="600"]]
230 230  
231 231  
232 -[[image:image-20220907170436-4.png]]
163 +=== Upgrade steps ===
233 233  
165 +==== Switch SW1 to put in ISP position ====
234 234  
167 +[[image:image-20220602102824-5.png||height="306" width="600"]]
235 235  
236 -(% style="color:blue" %)**6.  Send uplink using command**
237 237  
170 +==== Press the RST switch once ====
238 238  
239 -[[image:image-20220912084334-1.png]]
172 +[[image:image-20220602104701-12.png||height="285" width="600"]]
240 240  
241 241  
242 -[[image:image-20220912084412-3.png]]
175 +==== Open the Upgrade tool (Tremo Programmer) in PC ====
243 243  
177 +Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
244 244  
179 +[[image:image-20220602103227-6.png]]
245 245  
246 -[[image:image-20220907170744-6.png||height="242" width="798"]]
181 +[[image:image-20220602103357-7.png]]
247 247  
183 +===== Select the COM port corresponding to USB TTL =====
248 248  
185 +[[image:image-20220602103844-8.png]]
249 249  
250 -== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
187 +===== Select the bin file to burn =====
251 251  
189 +[[image:image-20220602104144-9.png]]
252 252  
253 -=== 1.9.1  Items needed for update ===
191 +[[image:image-20220602104251-10.png]]
254 254  
193 +[[image:image-20220602104402-11.png]]
255 255  
256 -1. LA66 LoRaWAN Shield
257 -1. Arduino
258 -1. USB TO TTL Adapter
195 +===== Click to start the download =====
259 259  
260 -[[image:image-20220602100052-2.png||height="385" width="600"]]
197 +[[image:image-20220602104923-13.png]]
261 261  
199 +===== The following figure appears to prove that the burning is in progress =====
262 262  
201 +[[image:image-20220602104948-14.png]]
263 263  
264 -=== 1.9.2  Connection ===
203 +===== The following picture appears to prove that the burning is successful =====
265 265  
205 +[[image:image-20220602105251-15.png]]
266 266  
267 -[[image:image-20220602101311-3.png||height="276" width="600"]]
268 268  
208 +== Order Info ==
269 269  
270 -(((
271 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
272 -)))
210 +Part Number: **LA66-LoRaWAN-Shield-XXX**
273 273  
274 -(((
275 -(% style="background-color:yellow" %)**GND  <-> GND
276 -TXD  <->  TXD
277 -RXD  <->  RXD**
278 -)))
212 +**XX**: The default frequency band
279 279  
214 +* **AS923**: LoRaWAN AS923 band
215 +* **AU915**: LoRaWAN AU915 band
216 +* **EU433**: LoRaWAN EU433 band
217 +* **EU868**: LoRaWAN EU868 band
218 +* **KR920**: LoRaWAN KR920 band
219 +* **US915**: LoRaWAN US915 band
220 +* **IN865**: LoRaWAN IN865 band
221 +* **CN470**: LoRaWAN CN470 band
222 +* **PP**: Peer to Peer LoRa Protocol
280 280  
281 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
224 +== Package Info ==
282 282  
283 -Connect USB TTL Adapter to PC after connecting the wires
226 +* LA66 LoRaWAN Shield x 1
227 +* RF Antenna x 1
284 284  
285 285  
286 -[[image:image-20220602102240-4.png||height="304" width="600"]]
230 += LA66 USB LoRaWAN Adapter =
287 287  
232 +== Overview ==
288 288  
234 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
289 289  
290 -=== 1.9.3  Upgrade steps ===
291 291  
237 +== Features ==
292 292  
239 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
240 +* Ultra-long RF range
241 +* Support LoRaWAN v1.0.4 protocol
242 +* Support peer-to-peer protocol
243 +* TCXO crystal to ensure RF performance on low temperature
244 +* Spring RF antenna
245 +* Available in different frequency LoRaWAN frequency bands.
246 +* World-wide unique OTAA keys.
247 +* AT Command via UART-TTL interface
248 +* Firmware upgradable via UART interface
293 293  
294 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
250 +== Specification ==
295 295  
252 +* CPU: 32-bit 48 MHz
253 +* Flash: 256KB
254 +* RAM: 64KB
255 +* Input Power Range: 5v
256 +* Frequency Range: 150 MHz ~~ 960 MHz
257 +* Maximum Power +22 dBm constant RF output
258 +* High sensitivity: -148 dBm
259 +* Temperature:
260 +** Storage: -55 ~~ +125℃
261 +** Operating: -40 ~~ +85℃
262 +* Humidity:
263 +** Storage: 5 ~~ 95% (Non-Condensing)
264 +** Operating: 10 ~~ 95% (Non-Condensing)
265 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
266 +* LoRa Rx current: <9 mA
296 296  
297 -[[image:image-20220602102824-5.png||height="306" width="600"]]
268 +== Pin Mapping & LED ==
298 298  
270 +== Example Send & Get Messages via LoRaWAN in PC ==
299 299  
272 +Connect the LA66 LoRa Shield to the PC
300 300  
274 +[[image:image-20220602171217-1.png||height="615" width="915"]]
301 301  
302 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
276 +Open the serial port tool
303 303  
278 +[[image:image-20220602161617-8.png]]
304 304  
305 -[[image:image-20220817085447-1.png]]
280 +[[image:image-20220602161718-9.png||height="529" width="927"]]
306 306  
282 +Press the reset switch RST on the LA66 LoRa Shield.
307 307  
284 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
308 308  
286 +[[image:image-20220602161935-10.png]]
309 309  
310 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
288 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
311 311  
290 +example: AT+SENDB=01,02,8,05820802581ea0a5
312 312  
292 +[[image:image-20220602162157-11.png]]
313 313  
314 -(((
315 -(% style="color:blue" %)**1.  Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
316 -)))
294 +Check to see if TTN received the message
317 317  
296 +[[image:image-20220602162331-12.png||height="547" width="1044"]]
318 318  
319 -[[image:image-20220602103227-6.png]]
298 +== Example Send & Get Messages via LoRaWAN in RPi ==
320 320  
300 +Connect the LA66 LoRa Shield to the RPI
321 321  
322 -[[image:image-20220602103357-7.png]]
302 +[[image:image-20220602171233-2.png||height="592" width="881"]]
323 323  
304 +Log in to the RPI's terminal and connect to the serial port
324 324  
306 +[[image:image-20220602153146-3.png]]
325 325  
326 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
327 -(% style="color:blue" %)**2.  Select the COM port corresponding to USB TTL**
308 +Press the reset switch RST on the LA66 LoRa Shield.
309 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
328 328  
311 +[[image:image-20220602154928-5.png]]
329 329  
330 -[[image:image-20220602103844-8.png]]
313 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
331 331  
315 +example: AT+SENDB=01,02,8,05820802581ea0a5
332 332  
317 +[[image:image-20220602160339-6.png]]
333 333  
334 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
335 -(% style="color:blue" %)**3.  Select the bin file to burn**
319 +Check to see if TTN received the message
336 336  
321 +[[image:image-20220602160627-7.png||height="468" width="1013"]]
337 337  
338 -[[image:image-20220602104144-9.png]]
323 +=== Install Minicom ===
339 339  
325 +Enter the following command in the RPI terminal
340 340  
341 -[[image:image-20220602104251-10.png]]
327 +apt update
342 342  
329 +[[image:image-20220602143155-1.png]]
343 343  
344 -[[image:image-20220602104402-11.png]]
331 +apt install minicom
345 345  
333 +[[image:image-20220602143744-2.png]]
346 346  
335 +=== Send PC's CPU/RAM usage to TTN via script. ===
347 347  
348 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
349 -(% style="color:blue" %)**4.  Click to start the download**
337 +==== Take python as an example: ====
350 350  
339 +===== Preconditions: =====
351 351  
352 -[[image:image-20220602104923-13.png]]
341 +1.LA66 USB LoRaWAN Adapter works fine
353 353  
343 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
354 354  
345 +===== Steps for usage =====
355 355  
356 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
357 -(% style="color:blue" %)**5.  Check update process**
347 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
358 358  
349 +2.Run the script and see the TTN
359 359  
360 -[[image:image-20220602104948-14.png]]
351 +[[image:image-20220602115852-3.png]]
361 361  
362 362  
363 363  
364 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
365 -(% style="color:blue" %)**The following picture shows that the burning is successful**
355 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
366 366  
367 367  
368 -[[image:image-20220602105251-15.png]]
358 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
369 369  
370 370  
371 371  
372 -= 2.  FAQ =
362 +== Order Info ==
373 373  
364 +Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
374 374  
375 -== 2.1  How to Compile Source Code for LA66? ==
366 +**XX**: The default frequency band
376 376  
368 +* **AS923**: LoRaWAN AS923 band
369 +* **AU915**: LoRaWAN AU915 band
370 +* **EU433**: LoRaWAN EU433 band
371 +* **EU868**: LoRaWAN EU868 band
372 +* **KR920**: LoRaWAN KR920 band
373 +* **US915**: LoRaWAN US915 band
374 +* **IN865**: LoRaWAN IN865 band
375 +* **CN470**: LoRaWAN CN470 band
376 +* **PP**: Peer to Peer LoRa Protocol
377 377  
378 -Compile and Upload Code to ASR6601 Platform :[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
378 +== Package Info ==
379 379  
380 +* LA66 USB LoRaWAN Adapter x 1
380 380  
381 -
382 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
383 -
384 -
385 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:.Instruction for LA66 Peer to Peer firmware.WebHome]]
386 -
387 -
388 -
389 -= 3.  Order Info =
390 -
391 -
392 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
393 -
394 -
395 -(% style="color:blue" %)**XXX**(%%): The default frequency band
396 -
397 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
398 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
399 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
400 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
401 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
402 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
403 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
404 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
405 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
406 -
407 -= 4.  Reference =
408 -
409 -
410 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
411 -
412 412  
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content
image-20220912084334-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912084352-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
image-20220912084412-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content