Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 163.2 >
edited by Xiaoling
on 2022/09/12 08:46
To version < 134.6 >
edited by Xiaoling
on 2022/07/26 10:41
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -6,14 +6,118 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 11  
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
15 +(((
16 +(((
17 +[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 +)))
15 15  
16 16  (((
21 +
22 +)))
23 +
24 +(((
25 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 +)))
27 +)))
28 +
29 +(((
30 +(((
31 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 +)))
33 +)))
34 +
35 +(((
36 +(((
37 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 +)))
39 +
40 +(((
41 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 +)))
43 +)))
44 +
45 +(((
46 +(((
47 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 +)))
49 +)))
50 +
51 +
52 +
53 +== 1.2  Features ==
54 +
55 +* Support LoRaWAN v1.0.4 protocol
56 +* Support peer-to-peer protocol
57 +* TCXO crystal to ensure RF performance on low temperature
58 +* SMD Antenna pad and i-pex antenna connector
59 +* Available in different frequency LoRaWAN frequency bands.
60 +* World-wide unique OTAA keys.
61 +* AT Command via UART-TTL interface
62 +* Firmware upgradable via UART interface
63 +* Ultra-long RF range
64 +
65 +
66 +
67 +== 1.3  Specification ==
68 +
69 +* CPU: 32-bit 48 MHz
70 +* Flash: 256KB
71 +* RAM: 64KB
72 +* Input Power Range: 1.8v ~~ 3.7v
73 +* Power Consumption: < 4uA.
74 +* Frequency Range: 150 MHz ~~ 960 MHz
75 +* Maximum Power +22 dBm constant RF output
76 +* High sensitivity: -148 dBm
77 +* Temperature:
78 +** Storage: -55 ~~ +125℃
79 +** Operating: -40 ~~ +85℃
80 +* Humidity:
81 +** Storage: 5 ~~ 95% (Non-Condensing)
82 +** Operating: 10 ~~ 95% (Non-Condensing)
83 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
84 +* LoRa Rx current: <9 mA
85 +* I/O Voltage: 3.3v
86 +
87 +
88 +
89 +== 1.4  AT Command ==
90 +
91 +
92 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
93 +
94 +
95 +
96 +== 1.5  Dimension ==
97 +
98 +[[image:image-20220718094750-3.png]]
99 +
100 +
101 +
102 +== 1.6  Pin Mapping ==
103 +
104 +[[image:image-20220720111850-1.png]]
105 +
106 +
107 +
108 +== 1.7  Land Pattern ==
109 +
110 +[[image:image-20220517072821-2.png]]
111 +
112 +
113 +
114 += 2.  LA66 LoRaWAN Shield =
115 +
116 +
117 +== 2.1  Overview ==
118 +
119 +
120 +(((
17 17  [[image:image-20220715000826-2.png||height="145" width="220"]]
18 18  )))
19 19  
... ... @@ -51,11 +51,10 @@
51 51  
52 52  
53 53  
54 -== 1.2  Features ==
158 +== 2.2  Features ==
55 55  
56 -
57 57  * Arduino Shield base on LA66 LoRaWAN module
58 -* Support LoRaWAN v1.0.3 protocol
161 +* Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 61  * SMA connector
... ... @@ -67,10 +67,8 @@
67 67  
68 68  
69 69  
173 +== 2.3  Specification ==
70 70  
71 -== 1.3  Specification ==
72 -
73 -
74 74  * CPU: 32-bit 48 MHz
75 75  * Flash: 256KB
76 76  * RAM: 64KB
... ... @@ -91,26 +91,18 @@
91 91  
92 92  
93 93  
195 +== 2.4  LED ==
94 94  
95 -== 1.4  Pin Mapping & LED ==
96 96  
97 -
98 -[[image:image-20220817085048-1.png||height="533" width="734"]]
99 -
100 -
101 -
102 102  ~1. The LED lights up red when there is an upstream data packet
103 103  2. When the network is successfully connected, the green light will be on for 5 seconds
104 104  3. Purple light on when receiving downlink data packets
105 105  
106 106  
107 -[[image:image-20220820112305-1.png||height="515" width="749"]]
108 108  
204 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
109 109  
110 110  
111 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
112 -
113 -
114 114  **Show connection diagram：**
115 115  
116 116  
... ... @@ -128,20 +128,15 @@
128 128  (% style="color:blue" %)**2.  Open project**
129 129  
130 130  
131 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
224 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
132 132  
133 133  
134 -[[image:image-20220726135239-1.png]]
135 135  
136 136  
137 -
138 138  (% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
139 139  
140 140  
141 -[[image:image-20220726135356-2.png]]
142 142  
143 -
144 -
145 145  (% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
146 146  
147 147  
... ... @@ -149,20 +149,19 @@
149 149  
150 150  
151 151  
152 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
240 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
153 153  
154 154  
155 155  (% style="color:blue" %)**1.  Open project**
156 156  
157 157  
158 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
246 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
159 159  
160 -
161 161  [[image:image-20220723172502-8.png]]
162 162  
163 163  
164 164  
165 -(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
252 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
166 166  
167 167  
168 168  [[image:image-20220723172938-9.png||height="652" width="1050"]]
... ... @@ -169,13 +169,13 @@
169 169  
170 170  
171 171  
172 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
259 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
173 173  
174 174  
175 175  (% style="color:blue" %)**1.  Open project**
176 176  
177 177  
178 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
265 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
179 179  
180 180  
181 181  [[image:image-20220723173341-10.png||height="581" width="1014"]]
... ... @@ -189,208 +189,434 @@
189 189  
190 190  
191 191  
279 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
192 192  
281 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
193 193  
194 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
283 +[[image:image-20220723175700-12.png||height="602" width="995"]]
195 195  
196 196  
197 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
198 198  
287 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
199 199  
200 -[[image:image-20220723175700-12.png||height="602" width="995"]]
201 201  
290 +=== 2.8.1  Items needed for update ===
202 202  
203 203  
204 -== 1.8  Example: How to join helium ==
293 +1. LA66 LoRaWAN Shield
294 +1. Arduino
295 +1. USB TO TTL Adapter
205 205  
297 +[[image:image-20220602100052-2.png||height="385" width="600"]]
206 206  
207 -(% style="color:blue" %)**1.  Create a new device.**
208 208  
300 +=== 2.8.2  Connection ===
209 209  
210 -[[image:image-20220907165500-1.png||height="464" width="940"]]
211 211  
303 +[[image:image-20220602101311-3.png||height="276" width="600"]]
212 212  
213 213  
214 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
306 +(((
307 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
308 +)))
215 215  
310 +(((
311 +(% style="background-color:yellow" %)**GND  <-> GND
312 +TXD  <->  TXD
313 +RXD  <->  RXD**
314 +)))
216 216  
217 -[[image:image-20220907165837-2.png||height="375" width="809"]]
218 218  
317 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
219 219  
319 +Connect USB TTL Adapter to PC after connecting the wires
220 220  
221 -(% style="color:blue" %)**3.  Use AT commands.**
222 222  
322 +[[image:image-20220602102240-4.png||height="304" width="600"]]
223 223  
224 -[[image:image-20220602100052-2.png||height="385" width="600"]]
225 225  
325 +=== 2.8.3  Upgrade steps ===
226 226  
227 227  
228 -(% style="color:#0000ff" %)**4.  Use command AT+CFG to get device configuration**
328 +==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
229 229  
230 230  
231 -[[image:image-20220907170308-3.png||height="556" width="617"]]
331 +[[image:image-20220602102824-5.png||height="306" width="600"]]
232 232  
233 233  
234 234  
235 -(% style="color:blue" %)**5.  Network successfully.**
335 +==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
236 236  
237 237  
238 -[[image:image-20220907170436-4.png]]
338 +[[image:image-20220602104701-12.png||height="285" width="600"]]
239 239  
240 240  
241 241  
242 -(% style="color:blue" %)**6.  Send uplink using command**
342 +==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
243 243  
244 244  
245 -[[image:image-20220912084334-1.png]]
345 +(((
346 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
347 +)))
246 246  
247 247  
248 -[[image:image-20220912084412-3.png]]
350 +[[image:image-20220602103227-6.png]]
249 249  
250 250  
353 +[[image:image-20220602103357-7.png]]
251 251  
252 -[[image:image-20220907170744-6.png||height="242" width="798"]]
253 253  
254 254  
357 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
358 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
255 255  
256 -== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
257 257  
361 +[[image:image-20220602103844-8.png]]
258 258  
259 -=== 1.9.1  Items needed for update ===
260 260  
261 261  
262 -1. LA66 LoRaWAN Shield
263 -1. Arduino
264 -1. USB TO TTL Adapter
365 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
366 +(% style="color:blue" %)**3. Select the bin file to burn**
265 265  
266 -[[image:image-20220602100052-2.png||height="385" width="600"]]
267 267  
369 +[[image:image-20220602104144-9.png]]
268 268  
269 269  
270 -=== 1.9.2  Connection ===
372 +[[image:image-20220602104251-10.png]]
271 271  
272 272  
273 -[[image:image-20220602101311-3.png||height="276" width="600"]]
375 +[[image:image-20220602104402-11.png]]
274 274  
275 275  
378 +
379 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
380 +(% style="color:blue" %)**4. Click to start the download**
381 +
382 +[[image:image-20220602104923-13.png]]
383 +
384 +
385 +
386 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
387 +(% style="color:blue" %)**5. Check update process**
388 +
389 +
390 +[[image:image-20220602104948-14.png]]
391 +
392 +
393 +
394 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
395 +(% style="color:blue" %)**The following picture shows that the burning is successful**
396 +
397 +[[image:image-20220602105251-15.png]]
398 +
399 +
400 +
401 += 3.  LA66 USB LoRaWAN Adapter =
402 +
403 +
404 +== 3.1  Overview ==
405 +
406 +
407 +[[image:image-20220715001142-3.png||height="145" width="220"]]
408 +
409 +
276 276  (((
277 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
411 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
278 278  )))
279 279  
280 280  (((
281 -(% style="background-color:yellow" %)**GND  <-> GND
282 -TXD  <->  TXD
283 -RXD  <->  RXD**
415 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
284 284  )))
285 285  
418 +(((
419 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
420 +)))
286 286  
287 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
422 +(((
423 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
424 +)))
288 288  
289 -Connect USB TTL Adapter to PC after connecting the wires
426 +(((
427 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
428 +)))
290 290  
291 291  
292 -[[image:image-20220602102240-4.png||height="304" width="600"]]
293 293  
432 +== 3.2  Features ==
294 294  
434 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
435 +* Ultra-long RF range
436 +* Support LoRaWAN v1.0.4 protocol
437 +* Support peer-to-peer protocol
438 +* TCXO crystal to ensure RF performance on low temperature
439 +* Spring RF antenna
440 +* Available in different frequency LoRaWAN frequency bands.
441 +* World-wide unique OTAA keys.
442 +* AT Command via UART-TTL interface
443 +* Firmware upgradable via UART interface
444 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
295 295  
296 -=== 1.9.3  Upgrade steps ===
297 297  
447 +== 3.3  Specification ==
298 298  
449 +* CPU: 32-bit 48 MHz
450 +* Flash: 256KB
451 +* RAM: 64KB
452 +* Input Power Range: 5v
453 +* Frequency Range: 150 MHz ~~ 960 MHz
454 +* Maximum Power +22 dBm constant RF output
455 +* High sensitivity: -148 dBm
456 +* Temperature:
457 +** Storage: -55 ~~ +125℃
458 +** Operating: -40 ~~ +85℃
459 +* Humidity:
460 +** Storage: 5 ~~ 95% (Non-Condensing)
461 +** Operating: 10 ~~ 95% (Non-Condensing)
462 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
463 +* LoRa Rx current: <9 mA
299 299  
300 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
301 301  
466 +== 3.4  Pin Mapping & LED ==
302 302  
303 -[[image:image-20220602102824-5.png||height="306" width="600"]]
304 304  
305 305  
470 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
306 306  
307 307  
308 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
473 +(((
474 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
475 +)))
309 309  
310 310  
311 -[[image:image-20220817085447-1.png]]
478 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
312 312  
313 313  
481 +[[image:image-20220723100027-1.png]]
314 314  
315 315  
316 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
484 +Open the serial port tool
317 317  
486 +[[image:image-20220602161617-8.png]]
318 318  
488 +[[image:image-20220602161718-9.png||height="457" width="800"]]
319 319  
320 -(((
321 -(% style="color:blue" %)**1.  Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
322 -)))
323 323  
324 324  
325 -[[image:image-20220602103227-6.png]]
492 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
326 326  
494 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
327 327  
328 -[[image:image-20220602103357-7.png]]
329 329  
497 +[[image:image-20220602161935-10.png||height="498" width="800"]]
330 330  
331 331  
332 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
333 -(% style="color:blue" %)**2.  Select the COM port corresponding to USB TTL**
334 334  
501 +(% style="color:blue" %)**3. See Uplink Command**
335 335  
336 -[[image:image-20220602103844-8.png]]
503 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
337 337  
505 +example: AT+SENDB=01,02,8,05820802581ea0a5
338 338  
507 +[[image:image-20220602162157-11.png||height="497" width="800"]]
339 339  
340 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
341 -(% style="color:blue" %)**3.  Select the bin file to burn**
342 342  
343 343  
344 -[[image:image-20220602104144-9.png]]
511 +(% style="color:blue" %)**4. Check to see if TTN received the message**
345 345  
513 +[[image:image-20220602162331-12.png||height="420" width="800"]]
346 346  
347 -[[image:image-20220602104251-10.png]]
348 348  
349 349  
350 -[[image:image-20220602104402-11.png]]
517 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
351 351  
352 352  
520 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
353 353  
354 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
355 -(% style="color:blue" %)**4.  Click to start the download**
522 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
356 356  
524 +(% style="color:red" %)**Preconditions:**
357 357  
358 -[[image:image-20220602104923-13.png]]
526 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
359 359  
528 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
360 360  
361 361  
362 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
363 -(% style="color:blue" %)**5.  Check update process**
364 364  
532 +(% style="color:blue" %)**Steps for usage:**
365 365  
366 -[[image:image-20220602104948-14.png]]
534 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
367 367  
536 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
368 368  
538 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
369 369  
370 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
371 -(% style="color:blue" %)**The following picture shows that the burning is successful**
372 372  
373 373  
374 -[[image:image-20220602105251-15.png]]
542 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
375 375  
376 376  
545 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
377 377  
378 -= 2.  FAQ =
379 379  
548 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
380 380  
381 -== 2.1  How to Compile Source Code for LA66? ==
550 +[[image:image-20220723100439-2.png]]
382 382  
383 383  
384 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
385 385  
554 +(% style="color:blue" %)**2. Install Minicom in RPi.**
386 386  
556 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
387 387  
388 -= 3.  Order Info =
558 + (% style="background-color:yellow" %)**apt update**
389 389  
560 + (% style="background-color:yellow" %)**apt install minicom**
390 390  
391 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
392 392  
563 +Use minicom to connect to the RPI's terminal
393 393  
565 +[[image:image-20220602153146-3.png||height="439" width="500"]]
566 +
567 +
568 +
569 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
570 +
571 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
572 +
573 +
574 +[[image:image-20220602154928-5.png||height="436" width="500"]]
575 +
576 +
577 +
578 +(% style="color:blue" %)**4. Send Uplink message**
579 +
580 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
581 +
582 +example: AT+SENDB=01,02,8,05820802581ea0a5
583 +
584 +
585 +[[image:image-20220602160339-6.png||height="517" width="600"]]
586 +
587 +
588 +
589 +Check to see if TTN received the message
590 +
591 +[[image:image-20220602160627-7.png||height="369" width="800"]]
592 +
593 +
594 +
595 +== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and APP sample process and DRAGINO-LA66-APP. ==
596 +
597 +
598 +=== 3.8.1 DRAGINO-LA66-APP ===
599 +
600 +
601 +[[image:image-20220723102027-3.png]]
602 +
603 +
604 +
605 +==== (% style="color:blue" %)**Overview：**(%%) ====
606 +
607 +
608 +DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Adapter and APP sample process. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Adapter.
609 +
610 +View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
611 +
612 +
613 +
614 +==== (% style="color:blue" %)**Conditions of Use：**(%%) ====
615 +
616 +
617 +Requires a type-c to USB adapter
618 +
619 +[[image:image-20220723104754-4.png]]
620 +
621 +
622 +
623 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
624 +
625 +
626 +Function and page introduction
627 +
628 +[[image:image-20220723113448-7.png||height="1481" width="670"]]
629 +
630 +1.Display LA66 USB LoRaWAN Module connection status
631 +
632 +2.Check and reconnect
633 +
634 +3.Turn send timestamps on or off
635 +
636 +4.Display LoRaWan connection status
637 +
638 +5.Check LoRaWan connection status
639 +
640 +6.The RSSI value of the node when the ACK is received
641 +
642 +7.Node's Signal Strength Icon
643 +
644 +8.Set the packet sending interval of the node in seconds
645 +
646 +9.AT command input box
647 +
648 +10.Send AT command button
649 +
650 +11.Node log box
651 +
652 +12.clear log button
653 +
654 +13.exit button
655 +
656 +
657 +LA66 USB LoRaWAN Module not connected
658 +
659 +[[image:image-20220723110520-5.png||height="903" width="677"]]
660 +
661 +
662 +
663 +Connect LA66 USB LoRaWAN Module
664 +
665 +[[image:image-20220723110626-6.png||height="906" width="680"]]
666 +
667 +
668 +
669 +=== 3.8.2 Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Adapter and integrate it into Node-RED ===
670 +
671 +
672 +**1.  Register LA66 USB LoRaWAN Module to TTNV3**
673 +
674 +[[image:image-20220723134549-8.png]]
675 +
676 +
677 +
678 +**2.  Open Node-RED,And import the JSON file to generate the flow**
679 +
680 +Sample JSON file please go to this link to download：放置JSON文件的链接
681 +
682 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
683 +
684 +The following is the positioning effect map
685 +
686 +[[image:image-20220723144339-1.png]]
687 +
688 +
689 +
690 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
691 +
692 +
693 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
694 +
695 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
696 +
697 +[[image:image-20220723150132-2.png]]
698 +
699 +
700 +
701 += 4.  Order Info =
702 +
703 +
704 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
705 +
706 +
394 394  (% style="color:blue" %)**XXX**(%%): The default frequency band
395 395  
396 396  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -403,12 +403,7 @@
403 403  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
404 404  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
405 405  
719 += 5.  Reference =
406 406  
407 407  
408 -
409 -= 4.  Reference =
410 -
411 -
412 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
413 -
414 -
722 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content
image-20220912084334-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912084352-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
image-20220912084412-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0