Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 163.1 >
edited by Xiaoling
on 2022/09/12 08:44
To version < 137.2 >
edited by Xiaoling
on 2022/07/29 08:57
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -6,14 +6,116 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 11  
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
15 +(((
16 +(((
17 +[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 +)))
15 15  
16 16  (((
21 +
22 +)))
23 +
24 +(((
25 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 +)))
27 +)))
28 +
29 +(((
30 +(((
31 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 +)))
33 +)))
34 +
35 +(((
36 +(((
37 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 +)))
39 +
40 +(((
41 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 +)))
43 +)))
44 +
45 +(((
46 +(((
47 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 +)))
49 +)))
50 +
51 +
52 +
53 +== 1.2  Features ==
54 +
55 +* Support LoRaWAN v1.0.4 protocol
56 +* Support peer-to-peer protocol
57 +* TCXO crystal to ensure RF performance on low temperature
58 +* SMD Antenna pad and i-pex antenna connector
59 +* Available in different frequency LoRaWAN frequency bands.
60 +* World-wide unique OTAA keys.
61 +* AT Command via UART-TTL interface
62 +* Firmware upgradable via UART interface
63 +* Ultra-long RF range
64 +
65 +
66 +== 1.3  Specification ==
67 +
68 +* CPU: 32-bit 48 MHz
69 +* Flash: 256KB
70 +* RAM: 64KB
71 +* Input Power Range: 1.8v ~~ 3.7v
72 +* Power Consumption: < 4uA.
73 +* Frequency Range: 150 MHz ~~ 960 MHz
74 +* Maximum Power +22 dBm constant RF output
75 +* High sensitivity: -148 dBm
76 +* Temperature:
77 +** Storage: -55 ~~ +125℃
78 +** Operating: -40 ~~ +85℃
79 +* Humidity:
80 +** Storage: 5 ~~ 95% (Non-Condensing)
81 +** Operating: 10 ~~ 95% (Non-Condensing)
82 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
83 +* LoRa Rx current: <9 mA
84 +* I/O Voltage: 3.3v
85 +
86 +
87 +== 1.4  AT Command ==
88 +
89 +
90 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
91 +
92 +
93 +
94 +== 1.5  Dimension ==
95 +
96 +[[image:image-20220718094750-3.png]]
97 +
98 +
99 +
100 +== 1.6  Pin Mapping ==
101 +
102 +[[image:image-20220720111850-1.png]]
103 +
104 +
105 +
106 +== 1.7  Land Pattern ==
107 +
108 +[[image:image-20220517072821-2.png]]
109 +
110 +
111 +
112 += 2.  LA66 LoRaWAN Shield =
113 +
114 +
115 +== 2.1  Overview ==
116 +
117 +
118 +(((
17 17  [[image:image-20220715000826-2.png||height="145" width="220"]]
18 18  )))
19 19  
... ... @@ -51,11 +51,10 @@
51 51  
52 52  
53 53  
54 -== 1.2  Features ==
156 +== 2.2  Features ==
55 55  
56 -
57 57  * Arduino Shield base on LA66 LoRaWAN module
58 -* Support LoRaWAN v1.0.3 protocol
159 +* Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 61  * SMA connector
... ... @@ -65,8 +65,8 @@
65 65  * Firmware upgradable via UART interface
66 66  * Ultra-long RF range
67 67  
68 -== 1.3  Specification ==
69 69  
170 +== 2.3  Specification ==
70 70  
71 71  * CPU: 32-bit 48 MHz
72 72  * Flash: 256KB
... ... @@ -86,25 +86,19 @@
86 86  * LoRa Rx current: <9 mA
87 87  * I/O Voltage: 3.3v
88 88  
89 -== 1.4  Pin Mapping & LED ==
90 90  
191 +== 2.4  LED ==
91 91  
92 -[[image:image-20220817085048-1.png||height="533" width="734"]]
93 93  
94 -
95 -
96 96  ~1. The LED lights up red when there is an upstream data packet
97 97  2. When the network is successfully connected, the green light will be on for 5 seconds
98 98  3. Purple light on when receiving downlink data packets
99 99  
100 100  
101 -[[image:image-20220820112305-1.png||height="515" width="749"]]
102 102  
200 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
103 103  
104 104  
105 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
106 -
107 -
108 108  **Show connection diagram：**
109 109  
110 110  
... ... @@ -124,18 +124,14 @@
124 124  
125 125  LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
126 126  
127 -
128 128  [[image:image-20220726135239-1.png]]
129 129  
130 130  
131 -
132 132  (% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
133 133  
134 -
135 135  [[image:image-20220726135356-2.png]]
136 136  
137 137  
138 -
139 139  (% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
140 140  
141 141  
... ... @@ -143,7 +143,7 @@
143 143  
144 144  
145 145  
146 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
237 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
147 147  
148 148  
149 149  (% style="color:blue" %)**1.  Open project**
... ... @@ -156,7 +156,7 @@
156 156  
157 157  
158 158  
159 -(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
250 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
160 160  
161 161  
162 162  [[image:image-20220723172938-9.png||height="652" width="1050"]]
... ... @@ -163,7 +163,7 @@
163 163  
164 164  
165 165  
166 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
257 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
167 167  
168 168  
169 169  (% style="color:blue" %)**1.  Open project**
... ... @@ -183,57 +183,20 @@
183 183  
184 184  
185 185  
186 -
187 -
188 188  (% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
189 189  
279 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
190 190  
191 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
192 -
193 -
194 194  [[image:image-20220723175700-12.png||height="602" width="995"]]
195 195  
196 -== 1.8 Example: How to join helium ==
197 197  
198 198  
199 -(% style="color:blue" %)**1. Create a new device.**
285 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
200 200  
201 -[[image:image-20220907165500-1.png||height="464" width="940"]]
202 202  
288 +=== 2.8.1  Items needed for update ===
203 203  
204 -(% style="color:blue" %)**2. Save the device after filling in the necessary information.**
205 205  
206 -[[image:image-20220907165837-2.png||height="375" width="809"]]
207 -
208 -
209 -(% style="color:blue" %)**3.  Use AT commands.**
210 -
211 -[[image:image-20220602100052-2.png||height="385" width="600"]]
212 -
213 -
214 -(% style="color:#0000ff" %)**4.Use command AT+CFG to get device configuration**
215 -
216 -[[image:image-20220907170308-3.png||height="556" width="617"]]
217 -
218 -
219 -(% style="color:blue" %)**5.  Network successfully.**
220 -
221 -[[image:image-20220907170436-4.png]]
222 -
223 -
224 -(% style="color:blue" %)**6.  Send uplink using command**
225 -
226 -[[image:image-20220907170659-5.png]]
227 -
228 -[[image:image-20220907170744-6.png||height="242" width="798"]]
229 -
230 -
231 -== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
232 -
233 -
234 -=== 1.9.1  Items needed for update ===
235 -
236 -
237 237  1. LA66 LoRaWAN Shield
238 238  1. Arduino
239 239  1. USB TO TTL Adapter
... ... @@ -241,10 +241,9 @@
241 241  [[image:image-20220602100052-2.png||height="385" width="600"]]
242 242  
243 243  
298 +=== 2.8.2  Connection ===
244 244  
245 -=== 1.9.2  Connection ===
246 246  
247 -
248 248  [[image:image-20220602101311-3.png||height="276" width="600"]]
249 249  
250 250  
... ... @@ -267,11 +267,9 @@
267 267  [[image:image-20220602102240-4.png||height="304" width="600"]]
268 268  
269 269  
323 +=== 2.8.3  Upgrade steps ===
270 270  
271 -=== 1.9.3  Upgrade steps ===
272 272  
273 -
274 -
275 275  ==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
276 276  
277 277  
... ... @@ -282,16 +282,15 @@
282 282  ==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
283 283  
284 284  
285 -[[image:image-20220817085447-1.png]]
336 +[[image:image-20220602104701-12.png||height="285" width="600"]]
286 286  
287 287  
288 288  
289 -
290 290  ==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
291 291  
292 292  
293 293  (((
294 -(% style="color:blue" %)**1. Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
344 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
295 295  )))
296 296  
297 297  
... ... @@ -327,7 +327,6 @@
327 327  (% class="wikigeneratedid" id="HClicktostartthedownload" %)
328 328  (% style="color:blue" %)**4. Click to start the download**
329 329  
330 -
331 331  [[image:image-20220602104923-13.png]]
332 332  
333 333  
... ... @@ -343,27 +343,329 @@
343 343  (% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
344 344  (% style="color:blue" %)**The following picture shows that the burning is successful**
345 345  
346 -
347 347  [[image:image-20220602105251-15.png]]
348 348  
349 349  
350 350  
351 -= 2.  FAQ =
399 += 3.  LA66 USB LoRaWAN Adapter =
352 352  
353 353  
354 -== 2.1  How to Compile Source Code for LA66? ==
402 +== 3.1  Overview ==
355 355  
356 356  
357 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
405 +[[image:image-20220715001142-3.png||height="145" width="220"]]
358 358  
359 359  
408 +(((
409 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
410 +)))
360 360  
361 -= 3.  Order Info =
412 +(((
413 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
414 +)))
362 362  
416 +(((
417 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
418 +)))
363 363  
364 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
420 +(((
421 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
422 +)))
365 365  
424 +(((
425 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
426 +)))
366 366  
428 +
429 +
430 +== 3.2  Features ==
431 +
432 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
433 +* Ultra-long RF range
434 +* Support LoRaWAN v1.0.4 protocol
435 +* Support peer-to-peer protocol
436 +* TCXO crystal to ensure RF performance on low temperature
437 +* Spring RF antenna
438 +* Available in different frequency LoRaWAN frequency bands.
439 +* World-wide unique OTAA keys.
440 +* AT Command via UART-TTL interface
441 +* Firmware upgradable via UART interface
442 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
443 +
444 +== 3.3  Specification ==
445 +
446 +* CPU: 32-bit 48 MHz
447 +* Flash: 256KB
448 +* RAM: 64KB
449 +* Input Power Range: 5v
450 +* Frequency Range: 150 MHz ~~ 960 MHz
451 +* Maximum Power +22 dBm constant RF output
452 +* High sensitivity: -148 dBm
453 +* Temperature:
454 +** Storage: -55 ~~ +125℃
455 +** Operating: -40 ~~ +85℃
456 +* Humidity:
457 +** Storage: 5 ~~ 95% (Non-Condensing)
458 +** Operating: 10 ~~ 95% (Non-Condensing)
459 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
460 +* LoRa Rx current: <9 mA
461 +
462 +== 3.4  Pin Mapping & LED ==
463 +
464 +
465 +
466 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
467 +
468 +
469 +(((
470 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
471 +)))
472 +
473 +
474 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
475 +
476 +
477 +[[image:image-20220723100027-1.png]]
478 +
479 +
480 +Open the serial port tool
481 +
482 +[[image:image-20220602161617-8.png]]
483 +
484 +[[image:image-20220602161718-9.png||height="457" width="800"]]
485 +
486 +
487 +
488 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
489 +
490 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
491 +
492 +
493 +[[image:image-20220602161935-10.png||height="498" width="800"]]
494 +
495 +
496 +
497 +(% style="color:blue" %)**3. See Uplink Command**
498 +
499 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
500 +
501 +example: AT+SENDB=01,02,8,05820802581ea0a5
502 +
503 +[[image:image-20220602162157-11.png||height="497" width="800"]]
504 +
505 +
506 +
507 +(% style="color:blue" %)**4. Check to see if TTN received the message**
508 +
509 +[[image:image-20220602162331-12.png||height="420" width="800"]]
510 +
511 +
512 +
513 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
514 +
515 +
516 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
517 +
518 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
519 +
520 +(% style="color:red" %)**Preconditions:**
521 +
522 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
523 +
524 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
525 +
526 +
527 +
528 +(% style="color:blue" %)**Steps for usage:**
529 +
530 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
531 +
532 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
533 +
534 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
535 +
536 +
537 +
538 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
539 +
540 +
541 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
542 +
543 +
544 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
545 +
546 +[[image:image-20220723100439-2.png]]
547 +
548 +
549 +
550 +(% style="color:blue" %)**2. Install Minicom in RPi.**
551 +
552 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
553 +
554 + (% style="background-color:yellow" %)**apt update**
555 +
556 + (% style="background-color:yellow" %)**apt install minicom**
557 +
558 +
559 +Use minicom to connect to the RPI's terminal
560 +
561 +[[image:image-20220602153146-3.png||height="439" width="500"]]
562 +
563 +
564 +
565 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
566 +
567 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
568 +
569 +
570 +[[image:image-20220602154928-5.png||height="436" width="500"]]
571 +
572 +
573 +
574 +(% style="color:blue" %)**4. Send Uplink message**
575 +
576 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
577 +
578 +example: AT+SENDB=01,02,8,05820802581ea0a5
579 +
580 +
581 +[[image:image-20220602160339-6.png||height="517" width="600"]]
582 +
583 +
584 +
585 +Check to see if TTN received the message
586 +
587 +[[image:image-20220602160627-7.png||height="369" width="800"]]
588 +
589 +
590 +
591 +== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and APP sample process and DRAGINO-LA66-APP. ==
592 +
593 +
594 +=== 3.8.1  DRAGINO-LA66-APP ===
595 +
596 +
597 +[[image:image-20220723102027-3.png]]
598 +
599 +
600 +
601 +==== (% style="color:blue" %)**Overview：**(%%) ====
602 +
603 +
604 +(((
605 +DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Adapter and APP sample process. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Adapter.
606 +)))
607 +
608 +(((
609 +View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
610 +)))
611 +
612 +
613 +
614 +==== (% style="color:blue" %)**Conditions of Use：**(%%) ====
615 +
616 +
617 +Requires a type-c to USB adapter
618 +
619 +[[image:image-20220723104754-4.png]]
620 +
621 +
622 +
623 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
624 +
625 +
626 +Function and page introduction
627 +
628 +[[image:image-20220723113448-7.png||height="1481" width="670"]]
629 +
630 +
631 +1.Display LA66 USB LoRaWAN Module connection status
632 +
633 +2.Check and reconnect
634 +
635 +3.Turn send timestamps on or off
636 +
637 +4.Display LoRaWan connection status
638 +
639 +5.Check LoRaWan connection status
640 +
641 +6.The RSSI value of the node when the ACK is received
642 +
643 +7.Node's Signal Strength Icon
644 +
645 +8.Set the packet sending interval of the node in seconds
646 +
647 +9.AT command input box
648 +
649 +10.Send AT command button
650 +
651 +11.Node log box
652 +
653 +12.clear log button
654 +
655 +13.exit button
656 +
657 +
658 +LA66 USB LoRaWAN Module not connected
659 +
660 +[[image:image-20220723110520-5.png||height="903" width="677"]]
661 +
662 +
663 +
664 +Connect LA66 USB LoRaWAN Module
665 +
666 +[[image:image-20220723110626-6.png||height="906" width="680"]]
667 +
668 +
669 +
670 +=== 3.8.2  Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Adapter and integrate it into Node-RED ===
671 +
672 +
673 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
674 +
675 +[[image:image-20220723134549-8.png]]
676 +
677 +
678 +
679 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
680 +
681 +Sample JSON file please go to this link to download：放置JSON文件的链接
682 +
683 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
684 +
685 +The following is the positioning effect map
686 +
687 +[[image:image-20220723144339-1.png]]
688 +
689 +
690 +
691 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
692 +
693 +
694 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
695 +
696 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
697 +
698 +[[image:image-20220723150132-2.png]]
699 +
700 +
701 +
702 += 4.  FAQ =
703 +
704 +
705 +== 4.1  How to Compile Source Code for LA66? ==
706 +
707 +
708 +Compile and Upload Code to ASR6601 Platform ：
709 +
710 +
711 +
712 += 5.  Order Info =
713 +
714 +
715 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
716 +
717 +
367 367  (% style="color:blue" %)**XXX**(%%): The default frequency band
368 368  
369 369  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -376,9 +376,9 @@
376 376  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
377 377  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
378 378  
379 -= 4.  Reference =
380 380  
381 381  
382 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
732 += 6.  Reference =
383 383  
384 -
734 +
735 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content
image-20220912084334-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912084352-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
image-20220912084412-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0