Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 160.1 >
edited by Bei Jinggeng
on 2022/09/09 14:59
To version < 87.7 >
edited by Xiaoling
on 2022/07/13 10:00
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Bei
1 +XWiki.Xiaoling
Content
... ... @@ -1,64 +1,32 @@
1 1  
2 2  
3 -**Table of Contents:**
4 -
5 5  {{toc/}}
6 6  
7 7  
8 8  
7 += 1.  LA66 LoRaWAN Module =
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 11  
10 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
13 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
15 15  
16 -(((
17 -[[image:image-20220715000826-2.png||height="145" width="220"]]
18 -)))
15 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
19 19  
20 -(((
21 -
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 -)))
27 -
28 -(((
29 -(((
30 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 -)))
32 -)))
33 -
34 -(((
35 -(((
36 36  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 -)))
38 -)))
39 39  
40 -(((
41 -(((
42 42  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 -)))
44 -)))
45 45  
46 -(((
47 -(((
48 48  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
49 -)))
50 -)))
51 51  
52 52  
53 -
54 54  == 1.2  Features ==
55 55  
56 -
57 -* Arduino Shield base on LA66 LoRaWAN module
58 -* Support LoRaWAN v1.0.3 protocol
26 +* Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 -* SMA connector
29 +* SMD Antenna pad and i-pex antenna connector
62 62  * Available in different frequency LoRaWAN frequency bands.
63 63  * World-wide unique OTAA keys.
64 64  * AT Command via UART-TTL interface
... ... @@ -65,9 +65,10 @@
65 65  * Firmware upgradable via UART interface
66 66  * Ultra-long RF range
67 67  
68 -== 1.3  Specification ==
69 69  
70 70  
38 +== 1.3  Specification ==
39 +
71 71  * CPU: 32-bit 48 MHz
72 72  * Flash: 256KB
73 73  * RAM: 64KB
... ... @@ -86,284 +86,371 @@
86 86  * LoRa Rx current: <9 mA
87 87  * I/O Voltage: 3.3v
88 88  
89 -== 1.4  Pin Mapping & LED ==
90 90  
91 91  
92 -[[image:image-20220817085048-1.png||height="533" width="734"]]
60 +== 1.4  AT Command ==
93 93  
62 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
94 94  
95 95  
96 -~1. The LED lights up red when there is an upstream data packet
97 -2. When the network is successfully connected, the green light will be on for 5 seconds
98 -3. Purple light on when receiving downlink data packets
65 +== 1.5  Dimension ==
99 99  
67 +[[image:image-20220517072526-1.png]]
100 100  
101 -[[image:image-20220820112305-1.png||height="515" width="749"]]
102 102  
103 103  
71 +== 1.6  Pin Mapping ==
104 104  
105 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
106 106  
74 +[[image:image-20220523101537-1.png]]
107 107  
108 -**Show connection diagram：**
109 109  
110 110  
111 -[[image:image-20220723170210-2.png||height="908" width="681"]]
78 +== 1.7  Land Pattern ==
112 112  
80 +[[image:image-20220517072821-2.png]]
113 113  
114 114  
115 -(% style="color:blue" %)**1.  open Arduino IDE**
116 116  
84 += 2.  LA66 LoRaWAN Shield =
117 117  
118 -[[image:image-20220723170545-4.png]]
119 119  
87 +== 2.1  Overview ==
120 120  
89 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
121 121  
122 -(% style="color:blue" %)**2.  Open project**
123 123  
92 +== 2.2  Features ==
124 124  
125 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
94 +* Arduino Shield base on LA66 LoRaWAN module
95 +* Support LoRaWAN v1.0.4 protocol
96 +* Support peer-to-peer protocol
97 +* TCXO crystal to ensure RF performance on low temperature
98 +* SMA connector
99 +* Available in different frequency LoRaWAN frequency bands.
100 +* World-wide unique OTAA keys.
101 +* AT Command via UART-TTL interface
102 +* Firmware upgradable via UART interface
103 +* Ultra-long RF range
126 126  
105 +== 2.3  Specification ==
127 127  
128 -[[image:image-20220726135239-1.png]]
107 +* CPU: 32-bit 48 MHz
108 +* Flash: 256KB
109 +* RAM: 64KB
110 +* Input Power Range: 1.8v ~~ 3.7v
111 +* Power Consumption: < 4uA.
112 +* Frequency Range: 150 MHz ~~ 960 MHz
113 +* Maximum Power +22 dBm constant RF output
114 +* High sensitivity: -148 dBm
115 +* Temperature:
116 +** Storage: -55 ~~ +125℃
117 +** Operating: -40 ~~ +85℃
118 +* Humidity:
119 +** Storage: 5 ~~ 95% (Non-Condensing)
120 +** Operating: 10 ~~ 95% (Non-Condensing)
121 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
122 +* LoRa Rx current: <9 mA
123 +* I/O Voltage: 3.3v
129 129  
125 +== 2.4  Pin Mapping & LED ==
130 130  
131 131  
132 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
133 133  
129 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
134 134  
135 -[[image:image-20220726135356-2.png]]
136 136  
137 137  
133 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
138 138  
139 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
140 140  
141 141  
142 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
137 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
143 143  
144 144  
145 145  
146 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
141 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
147 147  
148 148  
149 -(% style="color:blue" %)**1.  Open project**
144 +=== 2.8.1  Items needed for update ===
150 150  
146 +1. LA66 LoRaWAN Shield
147 +1. Arduino
148 +1. USB TO TTL Adapter
151 151  
152 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
150 +[[image:image-20220602100052-2.png||height="385" width="600"]]
153 153  
154 154  
155 -[[image:image-20220723172502-8.png]]
153 +=== 2.8.2  Connection ===
156 156  
157 157  
156 +[[image:image-20220602101311-3.png||height="276" width="600"]]
158 158  
159 -(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
160 160  
159 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
161 161  
162 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
163 163  
162 +(% style="background-color:yellow" %)**GND  <-> GND
163 +TXD  <->  TXD
164 +RXD  <->  RXD**
164 164  
165 165  
166 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
167 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
167 167  
169 +Connect USB TTL Adapter to PC after connecting the wires
168 168  
169 -(% style="color:blue" %)**1.  Open project**
170 170  
172 +[[image:image-20220602102240-4.png||height="304" width="600"]]
171 171  
172 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
173 173  
175 +=== 2.8.3  Upgrade steps ===
174 174  
175 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
176 176  
178 +==== 1.  Switch SW1 to put in ISP position ====
177 177  
178 178  
179 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
181 +[[image:image-20220602102824-5.png||height="306" width="600"]]
180 180  
181 181  
182 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
184 +==== 2.  Press the RST switch once ====
183 183  
186 +[[image:image-20220602104701-12.png||height="285" width="600"]]
184 184  
185 185  
189 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
186 186  
187 187  
188 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
192 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
189 189  
190 190  
191 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
195 +[[image:image-20220602103227-6.png]]
192 192  
193 193  
194 -[[image:image-20220723175700-12.png||height="602" width="995"]]
198 +[[image:image-20220602103357-7.png]]
195 195  
196 -== 1.8 Example: How to join helium ==
197 197  
198 198  
199 -(% style="color:blue" %)**1. Create a new device.**
202 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
203 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
200 200  
201 -[[image:image-20220907165500-1.png||height="464" width="940"]]
202 202  
206 +[[image:image-20220602103844-8.png]]
203 203  
204 -(% style="color:blue" %)**2. Save the device after filling in the necessary information.**
205 205  
206 -[[image:image-20220907165837-2.png||height="375" width="809"]]
207 207  
210 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
211 +(% style="color:blue" %)**3. Select the bin file to burn**
208 208  
209 -(% style="color:blue" %)**3.  Use AT commands.**
210 210  
211 -[[image:image-20220602100052-2.png||height="385" width="600"]]
214 +[[image:image-20220602104144-9.png]]
212 212  
213 213  
214 -(% style="color:#0000ff" %)**4.Use command AT+CFG to get device configuration**
217 +[[image:image-20220602104251-10.png]]
215 215  
216 -[[image:image-20220907170308-3.png||height="556" width="617"]]
217 217  
220 +[[image:image-20220602104402-11.png]]
218 218  
219 -(% style="color:blue" %)**5.  Network successfully.**
220 220  
221 -[[image:image-20220907170436-4.png]]
222 222  
224 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
225 +(% style="color:blue" %)**4. Click to start the download**
223 223  
224 -(% style="color:blue" %)**6.  Send uplink using command**
227 +[[image:image-20220602104923-13.png]]
225 225  
226 -[[image:image-20220907170659-5.png]]
227 227  
228 -[[image:image-20220907170744-6.png||height="242" width="798"]]
230 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
231 +(% style="color:blue" %)**5. Check update process**
229 229  
230 230  
231 -== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
234 +[[image:image-20220602104948-14.png]]
232 232  
233 233  
234 -=== 1.9.1  Items needed for update ===
235 235  
238 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
239 +(% style="color:blue" %)**The following picture shows that the burning is successful**
236 236  
237 -1. LA66 LoRaWAN Shield
238 -1. Arduino
239 -1. USB TO TTL Adapter
241 +[[image:image-20220602105251-15.png]]
240 240  
241 -[[image:image-20220602100052-2.png||height="385" width="600"]]
242 242  
243 243  
245 += 3.  LA66 USB LoRaWAN Adapter =
244 244  
245 -=== 1.9.2  Connection ===
246 246  
248 +== 3.1  Overview ==
247 247  
248 -[[image:image-20220602101311-3.png||height="276" width="600"]]
250 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
249 249  
250 250  
251 -(((
252 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
253 -)))
253 +== 3.2  Features ==
254 254  
255 -(((
256 -(% style="background-color:yellow" %)**GND  <-> GND
257 -TXD  <->  TXD
258 -RXD  <->  RXD**
259 -)))
255 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
256 +* Ultra-long RF range
257 +* Support LoRaWAN v1.0.4 protocol
258 +* Support peer-to-peer protocol
259 +* TCXO crystal to ensure RF performance on low temperature
260 +* Spring RF antenna
261 +* Available in different frequency LoRaWAN frequency bands.
262 +* World-wide unique OTAA keys.
263 +* AT Command via UART-TTL interface
264 +* Firmware upgradable via UART interface
260 260  
266 +== 3.3  Specification ==
261 261  
262 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
268 +* CPU: 32-bit 48 MHz
269 +* Flash: 256KB
270 +* RAM: 64KB
271 +* Input Power Range: 5v
272 +* Frequency Range: 150 MHz ~~ 960 MHz
273 +* Maximum Power +22 dBm constant RF output
274 +* High sensitivity: -148 dBm
275 +* Temperature:
276 +** Storage: -55 ~~ +125℃
277 +** Operating: -40 ~~ +85℃
278 +* Humidity:
279 +** Storage: 5 ~~ 95% (Non-Condensing)
280 +** Operating: 10 ~~ 95% (Non-Condensing)
281 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
282 +* LoRa Rx current: <9 mA
263 263  
264 -Connect USB TTL Adapter to PC after connecting the wires
284 +== 3.4  Pin Mapping & LED ==
265 265  
266 266  
267 -[[image:image-20220602102240-4.png||height="304" width="600"]]
268 268  
288 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
269 269  
270 270  
271 -=== 1.9.3  Upgrade steps ===
291 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
272 272  
273 273  
294 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
274 274  
275 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
276 276  
297 +[[image:image-20220602171217-1.png||height="538" width="800"]]
277 277  
278 -[[image:image-20220602102824-5.png||height="306" width="600"]]
279 279  
300 +Open the serial port tool
280 280  
302 +[[image:image-20220602161617-8.png]]
281 281  
282 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
304 +[[image:image-20220602161718-9.png||height="457" width="800"]]
283 283  
284 284  
285 -[[image:image-20220817085447-1.png]]
286 286  
308 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
287 287  
310 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
288 288  
289 289  
290 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
313 +[[image:image-20220602161935-10.png||height="498" width="800"]]
291 291  
292 292  
293 -(((
294 -(% style="color:blue" %)**1. Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
295 -)))
296 296  
317 +(% style="color:blue" %)**3. See Uplink Command**
297 297  
298 -[[image:image-20220602103227-6.png]]
319 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
299 299  
321 +example: AT+SENDB=01,02,8,05820802581ea0a5
300 300  
301 -[[image:image-20220602103357-7.png]]
323 +[[image:image-20220602162157-11.png||height="497" width="800"]]
302 302  
303 303  
304 304  
305 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
306 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
327 +(% style="color:blue" %)**4. Check to see if TTN received the message**
307 307  
329 +[[image:image-20220602162331-12.png||height="420" width="800"]]
308 308  
309 -[[image:image-20220602103844-8.png]]
310 310  
311 311  
333 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
312 312  
313 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
314 -(% style="color:blue" %)**3. Select the bin file to burn**
315 315  
336 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
316 316  
317 -[[image:image-20220602104144-9.png]]
318 318  
339 +(% style="color:red" %)**Preconditions:**
319 319  
320 -[[image:image-20220602104251-10.png]]
341 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
321 321  
343 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
322 322  
323 -[[image:image-20220602104402-11.png]]
324 324  
325 325  
347 +(% style="color:blue" %)**Steps for usage:**
326 326  
327 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
328 -(% style="color:blue" %)**4. Click to start the download**
349 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
329 329  
351 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
330 330  
331 -[[image:image-20220602104923-13.png]]
353 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
332 332  
333 333  
334 334  
335 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
336 -(% style="color:blue" %)**5. Check update process**
357 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
337 337  
338 338  
339 -[[image:image-20220602104948-14.png]]
360 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
340 340  
341 341  
363 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
342 342  
343 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
344 -(% style="color:blue" %)**The following picture shows that the burning is successful**
365 +[[image:image-20220602171233-2.png||height="538" width="800"]]
345 345  
346 346  
347 -[[image:image-20220602105251-15.png]]
348 348  
369 +(% style="color:blue" %)**2. Install Minicom in RPi.**
349 349  
371 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
350 350  
351 -= 2.  FAQ =
373 + (% style="background-color:yellow" %)**apt update**
352 352  
375 + (% style="background-color:yellow" %)**apt install minicom**
353 353  
354 -== 2.1  How to Compile Source Code for LA66? ==
355 355  
378 +Use minicom to connect to the RPI's terminal
356 356  
357 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
380 +[[image:image-20220602153146-3.png||height="439" width="500"]]
358 358  
359 359  
360 360  
361 -= 3.  Order Info =
384 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**(%%)
385 +(% style="color:blue" %)The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
362 362  
387 +[[image:image-20220602154928-5.png||height="436" width="500"]]
363 363  
364 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
365 365  
366 366  
391 +(% style="color:blue" %)**4. Send Uplink message**
392 +
393 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
394 +
395 +example: AT+SENDB=01,02,8,05820802581ea0a5
396 +
397 +
398 +[[image:image-20220602160339-6.png||height="517" width="600"]]
399 +
400 +
401 +
402 +Check to see if TTN received the message
403 +
404 +[[image:image-20220602160627-7.png||height="369" width="800"]]
405 +
406 +
407 +
408 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
409 +
410 +
411 +
412 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
413 +
414 +
415 +
416 +
417 += 4.  Order Info =
418 +
419 +
420 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
421 +
422 +
367 367  (% style="color:blue" %)**XXX**(%%): The default frequency band
368 368  
369 369  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -376,9 +376,11 @@
376 376  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
377 377  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
378 378  
379 -= 4.  Reference =
380 380  
381 381  
382 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
383 383  
438 += 5.  Reference =
439 +
440 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
441 +
384 384  
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0