Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 159.1 >
edited by Bei Jinggeng
on 2022/09/07 17:13
To version < 87.4 >
edited by Xiaoling
on 2022/07/13 09:55
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Bei
1 +XWiki.Xiaoling
Content
... ... @@ -1,64 +1,36 @@
1 1  
2 2  
3 -**Table of Contents:**
3 +{{box cssClass="floatinginfobox" title="**Contents**"}}
4 +{{toc/}}
5 +{{/box}}
4 4  
5 5  {{toc/}}
6 6  
7 7  
8 8  
11 += 1.  LA66 LoRaWAN Module =
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 11  
14 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
17 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
15 15  
16 -(((
17 -[[image:image-20220715000826-2.png||height="145" width="220"]]
18 -)))
19 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
19 19  
20 -(((
21 -
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 -)))
27 -
28 -(((
29 -(((
30 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 -)))
32 -)))
33 -
34 -(((
35 -(((
36 36  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 -)))
38 -)))
39 39  
40 -(((
41 -(((
42 42  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 -)))
44 -)))
45 45  
46 -(((
47 -(((
48 48  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
49 -)))
50 -)))
51 51  
52 52  
53 -
54 54  == 1.2  Features ==
55 55  
56 -
57 -* Arduino Shield base on LA66 LoRaWAN module
58 -* Support LoRaWAN v1.0.3 protocol
30 +* Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 -* SMA connector
33 +* SMD Antenna pad and i-pex antenna connector
62 62  * Available in different frequency LoRaWAN frequency bands.
63 63  * World-wide unique OTAA keys.
64 64  * AT Command via UART-TTL interface
... ... @@ -67,7 +67,6 @@
67 67  
68 68  == 1.3  Specification ==
69 69  
70 -
71 71  * CPU: 32-bit 48 MHz
72 72  * Flash: 256KB
73 73  * RAM: 64KB
... ... @@ -86,301 +86,386 @@
86 86  * LoRa Rx current: <9 mA
87 87  * I/O Voltage: 3.3v
88 88  
89 -== 1.4  Pin Mapping & LED ==
60 +== 1.4  AT Command ==
90 90  
62 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
91 91  
92 -[[image:image-20220817085048-1.png||height="533" width="734"]]
93 93  
65 +== 1.5  Dimension ==
94 94  
67 +[[image:image-20220517072526-1.png]]
95 95  
96 -~1. The LED lights up red when there is an upstream data packet
97 -2. When the network is successfully connected, the green light will be on for 5 seconds
98 -3. Purple light on when receiving downlink data packets
99 99  
100 100  
101 -[[image:image-20220820112305-1.png||height="515" width="749"]]
71 +== 1.6  Pin Mapping ==
102 102  
103 103  
74 +[[image:image-20220523101537-1.png]]
104 104  
105 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
106 106  
107 107  
108 -**Show connection diagram：**
78 +== 1.7  Land Pattern ==
109 109  
80 +[[image:image-20220517072821-2.png]]
110 110  
111 -[[image:image-20220723170210-2.png||height="908" width="681"]]
112 112  
113 113  
84 += 2.  LA66 LoRaWAN Shield =
114 114  
115 -(% style="color:blue" %)**1.  open Arduino IDE**
116 116  
87 +== 2.1  Overview ==
117 117  
118 -[[image:image-20220723170545-4.png]]
89 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
119 119  
120 120  
92 +== 2.2  Features ==
121 121  
122 -(% style="color:blue" %)**2.  Open project**
94 +* Arduino Shield base on LA66 LoRaWAN module
95 +* Support LoRaWAN v1.0.4 protocol
96 +* Support peer-to-peer protocol
97 +* TCXO crystal to ensure RF performance on low temperature
98 +* SMA connector
99 +* Available in different frequency LoRaWAN frequency bands.
100 +* World-wide unique OTAA keys.
101 +* AT Command via UART-TTL interface
102 +* Firmware upgradable via UART interface
103 +* Ultra-long RF range
123 123  
105 +== 2.3  Specification ==
124 124  
125 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
107 +* CPU: 32-bit 48 MHz
108 +* Flash: 256KB
109 +* RAM: 64KB
110 +* Input Power Range: 1.8v ~~ 3.7v
111 +* Power Consumption: < 4uA.
112 +* Frequency Range: 150 MHz ~~ 960 MHz
113 +* Maximum Power +22 dBm constant RF output
114 +* High sensitivity: -148 dBm
115 +* Temperature:
116 +** Storage: -55 ~~ +125℃
117 +** Operating: -40 ~~ +85℃
118 +* Humidity:
119 +** Storage: 5 ~~ 95% (Non-Condensing)
120 +** Operating: 10 ~~ 95% (Non-Condensing)
121 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
122 +* LoRa Rx current: <9 mA
123 +* I/O Voltage: 3.3v
126 126  
125 +== 2.4  Pin Mapping & LED ==
127 127  
128 -[[image:image-20220726135239-1.png]]
129 129  
130 130  
129 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
131 131  
132 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
133 133  
134 134  
135 -[[image:image-20220726135356-2.png]]
133 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
136 136  
137 137  
138 138  
139 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
137 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
140 140  
141 141  
142 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
143 143  
141 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
144 144  
145 145  
146 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
144 +=== 2.8.1  Items needed for update ===
147 147  
146 +1. LA66 LoRaWAN Shield
147 +1. Arduino
148 +1. USB TO TTL Adapter
148 148  
149 -(% style="color:blue" %)**1.  Open project**
150 +[[image:image-20220602100052-2.png||height="385" width="600"]]
150 150  
151 151  
152 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
153 +=== 2.8.2  Connection ===
153 153  
154 154  
155 -[[image:image-20220723172502-8.png]]
156 +[[image:image-20220602101311-3.png||height="276" width="600"]]
156 156  
157 157  
159 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
158 158  
159 -(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
160 160  
162 +(% style="background-color:yellow" %)**GND  <-> GND
163 +TXD  <->  TXD
164 +RXD  <->  RXD**
161 161  
162 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
163 163  
167 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
164 164  
169 +Connect USB TTL Adapter to PC after connecting the wires
165 165  
166 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
167 167  
172 +[[image:image-20220602102240-4.png||height="304" width="600"]]
168 168  
169 -(% style="color:blue" %)**1.  Open project**
170 170  
175 +=== 2.8.3  Upgrade steps ===
171 171  
172 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
173 173  
178 +==== 1.  Switch SW1 to put in ISP position ====
174 174  
175 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
176 176  
181 +[[image:image-20220602102824-5.png||height="306" width="600"]]
177 177  
178 178  
179 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
184 +==== 2.  Press the RST switch once ====
180 180  
186 +[[image:image-20220602104701-12.png||height="285" width="600"]]
181 181  
182 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
183 183  
189 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
184 184  
185 -LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
186 186  
192 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
187 187  
188 188  
189 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
195 +[[image:image-20220602103227-6.png]]
190 190  
191 191  
192 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
198 +[[image:image-20220602103357-7.png]]
193 193  
194 194  
195 -[[image:image-20220723175700-12.png||height="602" width="995"]]
196 196  
197 -== 1.8 Example: How to join helium ==
202 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
203 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
198 198  
199 199  
200 -(% style="color:blue" %)**1. Create a new device.**
206 +[[image:image-20220602103844-8.png]]
201 201  
202 -[[image:image-20220907165500-1.png||height="464" width="940"]]
203 203  
204 204  
205 -(% style="color:blue" %)**2. Save the device after filling in the necessary information.**
210 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
211 +(% style="color:blue" %)**3. Select the bin file to burn**
206 206  
207 -[[image:image-20220907165837-2.png||height="375" width="809"]]
208 208  
214 +[[image:image-20220602104144-9.png]]
209 209  
210 -(% style="color:blue" %)**3.  Use AT commands.**
211 211  
212 -[[image:image-20220602100052-2.png||height="385" width="600"]]
217 +[[image:image-20220602104251-10.png]]
213 213  
214 214  
215 -(% style="color:#0000ff" %)**4.Use command AT+CFG to get device configuration**
220 +[[image:image-20220602104402-11.png]]
216 216  
217 -[[image:image-20220907170308-3.png||height="556" width="617"]]
218 218  
219 219  
220 -(% style="color:blue" %)**5.  Network successfully.**
224 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
225 +(% style="color:blue" %)**4. Click to start the download**
221 221  
222 -[[image:image-20220907170436-4.png]]
227 +[[image:image-20220602104923-13.png]]
223 223  
224 224  
225 -(% style="color:blue" %)**6.  Send uplink using command**
230 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
231 +(% style="color:blue" %)**5. Check update process**
226 226  
227 -[[image:image-20220907170659-5.png]]
228 228  
229 -[[image:image-20220907170744-6.png||height="242" width="798"]]
234 +[[image:image-20220602104948-14.png]]
230 230  
231 231  
232 -== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
233 233  
238 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
239 +(% style="color:blue" %)**The following picture shows that the burning is successful**
234 234  
235 -=== 1.9.1  Items needed for update ===
241 +[[image:image-20220602105251-15.png]]
236 236  
237 237  
238 -1. LA66 LoRaWAN Shield
239 -1. Arduino
240 -1. USB TO TTL Adapter
241 241  
242 -[[image:image-20220602100052-2.png||height="385" width="600"]]
245 += 3.  LA66 USB LoRaWAN Adapter =
243 243  
244 244  
248 +== 3.1  Overview ==
245 245  
246 -=== 1.9.2  Connection ===
250 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
247 247  
248 248  
249 -[[image:image-20220602101311-3.png||height="276" width="600"]]
253 +== 3.2  Features ==
250 250  
255 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
256 +* Ultra-long RF range
257 +* Support LoRaWAN v1.0.4 protocol
258 +* Support peer-to-peer protocol
259 +* TCXO crystal to ensure RF performance on low temperature
260 +* Spring RF antenna
261 +* Available in different frequency LoRaWAN frequency bands.
262 +* World-wide unique OTAA keys.
263 +* AT Command via UART-TTL interface
264 +* Firmware upgradable via UART interface
251 251  
252 -(((
253 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
254 -)))
266 +== 3.3  Specification ==
255 255  
256 -(((
257 -(% style="background-color:yellow" %)**GND  <-> GND
258 -TXD  <->  TXD
259 -RXD  <->  RXD**
260 -)))
268 +* CPU: 32-bit 48 MHz
269 +* Flash: 256KB
270 +* RAM: 64KB
271 +* Input Power Range: 5v
272 +* Frequency Range: 150 MHz ~~ 960 MHz
273 +* Maximum Power +22 dBm constant RF output
274 +* High sensitivity: -148 dBm
275 +* Temperature:
276 +** Storage: -55 ~~ +125℃
277 +** Operating: -40 ~~ +85℃
278 +* Humidity:
279 +** Storage: 5 ~~ 95% (Non-Condensing)
280 +** Operating: 10 ~~ 95% (Non-Condensing)
281 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
282 +* LoRa Rx current: <9 mA
261 261  
284 +== 3.4  Pin Mapping & LED ==
262 262  
263 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
264 264  
265 -Connect USB TTL Adapter to PC after connecting the wires
266 266  
288 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
267 267  
268 -[[image:image-20220602102240-4.png||height="304" width="600"]]
269 269  
291 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
270 270  
271 271  
272 -=== 1.9.3  Upgrade steps ===
294 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
273 273  
274 274  
297 +[[image:image-20220602171217-1.png||height="538" width="800"]]
275 275  
276 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
277 277  
300 +Open the serial port tool
278 278  
279 -[[image:image-20220602102824-5.png||height="306" width="600"]]
302 +[[image:image-20220602161617-8.png]]
280 280  
304 +[[image:image-20220602161718-9.png||height="457" width="800"]]
281 281  
282 282  
283 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
284 284  
308 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
285 285  
286 -[[image:image-20220817085447-1.png]]
310 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
287 287  
288 288  
313 +[[image:image-20220602161935-10.png||height="498" width="800"]]
289 289  
290 290  
291 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
292 292  
317 +(% style="color:blue" %)**3. See Uplink Command**
293 293  
294 -(((
295 -(% style="color:blue" %)**1. Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
296 -)))
319 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
297 297  
321 +example: AT+SENDB=01,02,8,05820802581ea0a5
298 298  
299 -[[image:image-20220602103227-6.png]]
323 +[[image:image-20220602162157-11.png||height="497" width="800"]]
300 300  
301 301  
302 -[[image:image-20220602103357-7.png]]
303 303  
327 +(% style="color:blue" %)**4. Check to see if TTN received the message**
304 304  
329 +[[image:image-20220602162331-12.png||height="420" width="800"]]
305 305  
306 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
307 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
308 308  
309 309  
310 -[[image:image-20220602103844-8.png]]
333 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
311 311  
312 312  
336 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
313 313  
314 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
315 -(% style="color:blue" %)**3. Select the bin file to burn**
316 316  
339 +(% style="color:red" %)**Preconditions:**
317 317  
318 -[[image:image-20220602104144-9.png]]
341 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
319 319  
343 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
320 320  
321 -[[image:image-20220602104251-10.png]]
322 322  
323 323  
324 -[[image:image-20220602104402-11.png]]
347 +(% style="color:blue" %)**Steps for usage:**
325 325  
349 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
326 326  
351 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
327 327  
328 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
329 -(% style="color:blue" %)**4. Click to start the download**
353 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
330 330  
331 331  
332 -[[image:image-20220602104923-13.png]]
333 333  
357 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
334 334  
335 335  
336 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
337 -(% style="color:blue" %)**5. Check update process**
360 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
338 338  
339 339  
340 -[[image:image-20220602104948-14.png]]
363 +(% style="color:blue" %)**~1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
341 341  
365 +[[image:image-20220602171233-2.png||height="538" width="800"]]
342 342  
343 343  
344 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
345 -(% style="color:blue" %)**The following picture shows that the burning is successful**
346 346  
369 +(% style="color:blue" %)**2. Install Minicom in RPi.**
347 347  
348 -[[image:image-20220602105251-15.png]]
371 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
349 349  
373 + (% style="background-color:yellow" %)**apt update**
350 350  
375 + (% style="background-color:yellow" %)**apt install minicom**
351 351  
352 -= 2.  FAQ =
353 353  
378 +Use minicom to connect to the RPI's terminal
354 354  
355 -== 2.1  How to Compile Source Code for LA66? ==
380 +[[image:image-20220602153146-3.png||height="439" width="500"]]
356 356  
357 357  
358 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
359 359  
384 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
385 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
360 360  
387 +[[image:image-20220602154928-5.png||height="436" width="500"]]
361 361  
362 -= 3.  Order Info =
363 363  
364 364  
365 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
391 +(% style="color:blue" %)**4. Send Uplink message**
366 366  
393 +Format: **(% style="color:#4472C4" %)AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
367 367  
368 -(% style="color:blue" %)**XXX**(%%): The default frequency band
395 +example: AT+SENDB=01,02,8,05820802581ea0a5
369 369  
370 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
371 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
372 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
373 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
374 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
375 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
376 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
377 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
378 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
379 379  
398 +[[image:image-20220602160339-6.png||height="517" width="600"]]
380 380  
381 -= 4.  Reference =
382 382  
383 383  
384 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
402 +Check to see if TTN received the message
385 385  
404 +[[image:image-20220602160627-7.png||height="369" width="800"]]
405 +
406 +
407 +
408 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
409 +
410 +
411 +
412 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
413 +
414 +
415 +
416 +
417 += 4.  Order Info =
418 +
419 +
420 +Part Number: **LA66-XXX**, **LA66-LoRaWAN-Shield-XXX**  or  **LA66-USB-LoRaWAN-Adapter-XXX**
421 +
422 +
423 +**XXX**: The default frequency band
424 +
425 +* **AS923**:  LoRaWAN AS923 band
426 +* **AU915**:  LoRaWAN AU915 band
427 +* **EU433**:  LoRaWAN EU433 band
428 +* **EU868**:  LoRaWAN EU868 band
429 +* **KR920**:  LoRaWAN KR920 band
430 +* **US915**:  LoRaWAN US915 band
431 +* **IN865**:  LoRaWAN IN865 band
432 +* **CN470**: LoRaWAN CN470 band
433 +* **PP**:  Peer to Peer LoRa Protocol
434 +
435 +
436 +
437 +
438 += 5.  Reference =
439 +
440 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
441 +
386 386  
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0