Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 159.1 >
edited by Bei Jinggeng
on 2022/09/07 17:13
To version < 104.1 >
edited by Herong Lu
on 2022/07/23 10:20
>
Change comment: Uploaded new attachment "image-20220723102027-3.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Bei
1 +XWiki.Lu
Content
... ... @@ -6,14 +6,118 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 11  
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
15 +(((
16 +(((
17 +[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 +)))
15 15  
16 16  (((
21 +
22 +)))
23 +
24 +(((
25 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 +)))
27 +)))
28 +
29 +(((
30 +(((
31 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 +)))
33 +)))
34 +
35 +(((
36 +(((
37 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 +)))
39 +
40 +(((
41 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 +)))
43 +)))
44 +
45 +(((
46 +(((
47 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 +)))
49 +)))
50 +
51 +
52 +
53 +== 1.2  Features ==
54 +
55 +* Support LoRaWAN v1.0.4 protocol
56 +* Support peer-to-peer protocol
57 +* TCXO crystal to ensure RF performance on low temperature
58 +* SMD Antenna pad and i-pex antenna connector
59 +* Available in different frequency LoRaWAN frequency bands.
60 +* World-wide unique OTAA keys.
61 +* AT Command via UART-TTL interface
62 +* Firmware upgradable via UART interface
63 +* Ultra-long RF range
64 +
65 +
66 +
67 +== 1.3  Specification ==
68 +
69 +* CPU: 32-bit 48 MHz
70 +* Flash: 256KB
71 +* RAM: 64KB
72 +* Input Power Range: 1.8v ~~ 3.7v
73 +* Power Consumption: < 4uA.
74 +* Frequency Range: 150 MHz ~~ 960 MHz
75 +* Maximum Power +22 dBm constant RF output
76 +* High sensitivity: -148 dBm
77 +* Temperature:
78 +** Storage: -55 ~~ +125℃
79 +** Operating: -40 ~~ +85℃
80 +* Humidity:
81 +** Storage: 5 ~~ 95% (Non-Condensing)
82 +** Operating: 10 ~~ 95% (Non-Condensing)
83 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
84 +* LoRa Rx current: <9 mA
85 +* I/O Voltage: 3.3v
86 +
87 +
88 +
89 +== 1.4  AT Command ==
90 +
91 +
92 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
93 +
94 +
95 +
96 +== 1.5  Dimension ==
97 +
98 +[[image:image-20220718094750-3.png]]
99 +
100 +
101 +
102 +== 1.6  Pin Mapping ==
103 +
104 +[[image:image-20220720111850-1.png]]
105 +
106 +
107 +
108 +== 1.7  Land Pattern ==
109 +
110 +[[image:image-20220517072821-2.png]]
111 +
112 +
113 +
114 += 2.  LA66 LoRaWAN Shield =
115 +
116 +
117 +== 2.1  Overview ==
118 +
119 +
120 +(((
17 17  [[image:image-20220715000826-2.png||height="145" width="220"]]
18 18  )))
19 19  
... ... @@ -51,11 +51,10 @@
51 51  
52 52  
53 53  
54 -== 1.2  Features ==
158 +== 2.2  Features ==
55 55  
56 -
57 57  * Arduino Shield base on LA66 LoRaWAN module
58 -* Support LoRaWAN v1.0.3 protocol
161 +* Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 61  * SMA connector
... ... @@ -65,9 +65,10 @@
65 65  * Firmware upgradable via UART interface
66 66  * Ultra-long RF range
67 67  
68 -== 1.3  Specification ==
69 69  
70 70  
173 +== 2.3  Specification ==
174 +
71 71  * CPU: 32-bit 48 MHz
72 72  * Flash: 256KB
73 73  * RAM: 64KB
... ... @@ -86,285 +86,347 @@
86 86  * LoRa Rx current: <9 mA
87 87  * I/O Voltage: 3.3v
88 88  
89 -== 1.4  Pin Mapping & LED ==
90 90  
91 91  
92 -[[image:image-20220817085048-1.png||height="533" width="734"]]
195 +== 2.4  Pin Mapping & LED ==
93 93  
94 94  
95 95  
96 -~1. The LED lights up red when there is an upstream data packet
97 -2. When the network is successfully connected, the green light will be on for 5 seconds
98 -3. Purple light on when receiving downlink data packets
199 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
99 99  
100 100  
101 -[[image:image-20220820112305-1.png||height="515" width="749"]]
102 102  
203 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
103 103  
104 104  
105 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
106 106  
207 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
107 107  
108 -**Show connection diagram：**
109 109  
110 110  
111 -[[image:image-20220723170210-2.png||height="908" width="681"]]
211 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
112 112  
113 113  
214 +=== 2.8.1  Items needed for update ===
114 114  
115 -(% style="color:blue" %)**1.  open Arduino IDE**
216 +1. LA66 LoRaWAN Shield
217 +1. Arduino
218 +1. USB TO TTL Adapter
116 116  
220 +[[image:image-20220602100052-2.png||height="385" width="600"]]
117 117  
118 -[[image:image-20220723170545-4.png]]
119 119  
223 +=== 2.8.2  Connection ===
120 120  
121 121  
122 -(% style="color:blue" %)**2.  Open project**
226 +[[image:image-20220602101311-3.png||height="276" width="600"]]
123 123  
124 124  
125 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
229 +(((
230 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
231 +)))
126 126  
233 +(((
234 +(% style="background-color:yellow" %)**GND  <-> GND
235 +TXD  <->  TXD
236 +RXD  <->  RXD**
237 +)))
127 127  
128 -[[image:image-20220726135239-1.png]]
129 129  
240 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
130 130  
242 +Connect USB TTL Adapter to PC after connecting the wires
131 131  
132 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
133 133  
245 +[[image:image-20220602102240-4.png||height="304" width="600"]]
134 134  
135 -[[image:image-20220726135356-2.png]]
136 136  
248 +=== 2.8.3  Upgrade steps ===
137 137  
138 138  
139 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
251 +==== 1.  Switch SW1 to put in ISP position ====
140 140  
141 141  
142 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
254 +[[image:image-20220602102824-5.png||height="306" width="600"]]
143 143  
144 144  
145 145  
146 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
258 +==== 2.  Press the RST switch once ====
147 147  
148 148  
149 -(% style="color:blue" %)**1.  Open project**
261 +[[image:image-20220602104701-12.png||height="285" width="600"]]
150 150  
151 151  
152 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
153 153  
265 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
154 154  
155 -[[image:image-20220723172502-8.png]]
156 156  
268 +(((
269 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
270 +)))
157 157  
158 158  
159 -(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
273 +[[image:image-20220602103227-6.png]]
160 160  
161 161  
162 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
276 +[[image:image-20220602103357-7.png]]
163 163  
164 164  
165 165  
166 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
280 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
281 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
167 167  
168 168  
169 -(% style="color:blue" %)**1.  Open project**
284 +[[image:image-20220602103844-8.png]]
170 170  
171 171  
172 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
173 173  
288 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
289 +(% style="color:blue" %)**3. Select the bin file to burn**
174 174  
175 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
176 176  
292 +[[image:image-20220602104144-9.png]]
177 177  
178 178  
179 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
295 +[[image:image-20220602104251-10.png]]
180 180  
181 181  
182 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
298 +[[image:image-20220602104402-11.png]]
183 183  
184 184  
185 -LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
186 186  
302 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
303 +(% style="color:blue" %)**4. Click to start the download**
187 187  
305 +[[image:image-20220602104923-13.png]]
188 188  
189 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
190 190  
191 191  
192 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
309 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
310 +(% style="color:blue" %)**5. Check update process**
193 193  
194 194  
195 -[[image:image-20220723175700-12.png||height="602" width="995"]]
313 +[[image:image-20220602104948-14.png]]
196 196  
197 -== 1.8 Example: How to join helium ==
198 198  
199 199  
200 -(% style="color:blue" %)**1. Create a new device.**
317 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
318 +(% style="color:blue" %)**The following picture shows that the burning is successful**
201 201  
202 -[[image:image-20220907165500-1.png||height="464" width="940"]]
320 +[[image:image-20220602105251-15.png]]
203 203  
204 204  
205 -(% style="color:blue" %)**2. Save the device after filling in the necessary information.**
206 206  
207 -[[image:image-20220907165837-2.png||height="375" width="809"]]
324 += 3.  LA66 USB LoRaWAN Adapter =
208 208  
209 209  
210 -(% style="color:blue" %)**3.  Use AT commands.**
327 +== 3.1  Overview ==
211 211  
212 -[[image:image-20220602100052-2.png||height="385" width="600"]]
213 213  
330 +[[image:image-20220715001142-3.png||height="145" width="220"]]
214 214  
215 -(% style="color:#0000ff" %)**4.Use command AT+CFG to get device configuration**
216 216  
217 -[[image:image-20220907170308-3.png||height="556" width="617"]]
333 +(((
334 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
335 +)))
218 218  
337 +(((
338 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
339 +)))
219 219  
220 -(% style="color:blue" %)**5.  Network successfully.**
341 +(((
342 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
343 +)))
221 221  
222 -[[image:image-20220907170436-4.png]]
345 +(((
346 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
347 +)))
223 223  
349 +(((
350 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
351 +)))
224 224  
225 -(% style="color:blue" %)**6.  Send uplink using command**
226 226  
227 -[[image:image-20220907170659-5.png]]
228 228  
229 -[[image:image-20220907170744-6.png||height="242" width="798"]]
355 +== 3.2  Features ==
230 230  
357 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
358 +* Ultra-long RF range
359 +* Support LoRaWAN v1.0.4 protocol
360 +* Support peer-to-peer protocol
361 +* TCXO crystal to ensure RF performance on low temperature
362 +* Spring RF antenna
363 +* Available in different frequency LoRaWAN frequency bands.
364 +* World-wide unique OTAA keys.
365 +* AT Command via UART-TTL interface
366 +* Firmware upgradable via UART interface
367 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
231 231  
232 -== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
233 233  
234 234  
235 -=== 1.9.1  Items needed for update ===
371 +== 3.3  Specification ==
236 236  
373 +* CPU: 32-bit 48 MHz
374 +* Flash: 256KB
375 +* RAM: 64KB
376 +* Input Power Range: 5v
377 +* Frequency Range: 150 MHz ~~ 960 MHz
378 +* Maximum Power +22 dBm constant RF output
379 +* High sensitivity: -148 dBm
380 +* Temperature:
381 +** Storage: -55 ~~ +125℃
382 +** Operating: -40 ~~ +85℃
383 +* Humidity:
384 +** Storage: 5 ~~ 95% (Non-Condensing)
385 +** Operating: 10 ~~ 95% (Non-Condensing)
386 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
387 +* LoRa Rx current: <9 mA
237 237  
238 -1. LA66 LoRaWAN Shield
239 -1. Arduino
240 -1. USB TO TTL Adapter
241 241  
242 -[[image:image-20220602100052-2.png||height="385" width="600"]]
243 243  
391 +== 3.4  Pin Mapping & LED ==
244 244  
245 245  
246 -=== 1.9.2  Connection ===
247 247  
395 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
248 248  
249 -[[image:image-20220602101311-3.png||height="276" width="600"]]
250 250  
251 -
252 252  (((
253 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
399 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
254 254  )))
255 255  
256 -(((
257 -(% style="background-color:yellow" %)**GND  <-> GND
258 -TXD  <->  TXD
259 -RXD  <->  RXD**
260 -)))
261 261  
403 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
262 262  
263 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
264 264  
265 -Connect USB TTL Adapter to PC after connecting the wires
406 +[[image:image-20220602171217-1.png||height="538" width="800"]]
266 266  
267 267  
268 -[[image:image-20220602102240-4.png||height="304" width="600"]]
409 +Open the serial port tool
269 269  
411 +[[image:image-20220602161617-8.png]]
270 270  
413 +[[image:image-20220602161718-9.png||height="457" width="800"]]
271 271  
272 -=== 1.9.3  Upgrade steps ===
273 273  
274 274  
417 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
275 275  
276 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
419 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
277 277  
278 278  
279 -[[image:image-20220602102824-5.png||height="306" width="600"]]
422 +[[image:image-20220602161935-10.png||height="498" width="800"]]
280 280  
281 281  
282 282  
283 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
426 +(% style="color:blue" %)**3. See Uplink Command**
284 284  
428 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
285 285  
286 -[[image:image-20220817085447-1.png]]
430 +example: AT+SENDB=01,02,8,05820802581ea0a5
287 287  
432 +[[image:image-20220602162157-11.png||height="497" width="800"]]
288 288  
289 289  
290 290  
291 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
436 +(% style="color:blue" %)**4. Check to see if TTN received the message**
292 292  
438 +[[image:image-20220602162331-12.png||height="420" width="800"]]
293 293  
294 -(((
295 -(% style="color:blue" %)**1. Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
296 -)))
297 297  
298 298  
299 -[[image:image-20220602103227-6.png]]
442 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
300 300  
301 301  
302 -[[image:image-20220602103357-7.png]]
445 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
303 303  
304 304  
448 +(% style="color:red" %)**Preconditions:**
305 305  
306 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
307 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
450 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
308 308  
452 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
309 309  
310 -[[image:image-20220602103844-8.png]]
311 311  
312 312  
456 +(% style="color:blue" %)**Steps for usage:**
313 313  
314 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
315 -(% style="color:blue" %)**3. Select the bin file to burn**
458 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
316 316  
460 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
317 317  
318 -[[image:image-20220602104144-9.png]]
462 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
319 319  
320 320  
321 -[[image:image-20220602104251-10.png]]
322 322  
466 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
323 323  
324 -[[image:image-20220602104402-11.png]]
325 325  
469 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
326 326  
327 327  
328 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
329 -(% style="color:blue" %)**4. Click to start the download**
472 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
330 330  
474 +[[image:image-20220602171233-2.png||height="538" width="800"]]
331 331  
332 -[[image:image-20220602104923-13.png]]
333 333  
334 334  
478 +(% style="color:blue" %)**2. Install Minicom in RPi.**
335 335  
336 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
337 -(% style="color:blue" %)**5. Check update process**
480 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
338 338  
482 + (% style="background-color:yellow" %)**apt update**
339 339  
340 -[[image:image-20220602104948-14.png]]
484 + (% style="background-color:yellow" %)**apt install minicom**
341 341  
342 342  
487 +Use minicom to connect to the RPI's terminal
343 343  
344 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
345 -(% style="color:blue" %)**The following picture shows that the burning is successful**
489 +[[image:image-20220602153146-3.png||height="439" width="500"]]
346 346  
347 347  
348 -[[image:image-20220602105251-15.png]]
349 349  
493 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
350 350  
495 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
351 351  
352 -= 2.  FAQ =
353 353  
498 +[[image:image-20220602154928-5.png||height="436" width="500"]]
354 354  
355 -== 2.1  How to Compile Source Code for LA66? ==
356 356  
357 357  
358 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
502 +(% style="color:blue" %)**4. Send Uplink message**
359 359  
504 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
360 360  
506 +example: AT+SENDB=01,02,8,05820802581ea0a5
361 361  
362 -= 3.  Order Info =
363 363  
509 +[[image:image-20220602160339-6.png||height="517" width="600"]]
364 364  
365 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
366 366  
367 367  
513 +Check to see if TTN received the message
514 +
515 +[[image:image-20220602160627-7.png||height="369" width="800"]]
516 +
517 +
518 +
519 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
520 +
521 +
522 +
523 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
524 +
525 +
526 +
527 +
528 += 4.  Order Info =
529 +
530 +
531 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
532 +
533 +
368 368  (% style="color:blue" %)**XXX**(%%): The default frequency band
369 369  
370 370  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -377,10 +377,6 @@
377 377  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
378 378  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
379 379  
546 += 5.  Reference =
380 380  
381 -= 4.  Reference =
382 -
383 -
384 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
385 -
386 -
548 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0