Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 151.3 >
edited by Xiaoling
on 2022/08/22 16:15
To version < 87.10 >
edited by Xiaoling
on 2022/07/13 10:03
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -1,61 +1,98 @@
1 1  
2 2  
3 -**Table of Contents:**
4 -
5 5  {{toc/}}
6 6  
7 7  
8 8  
7 += 1.  LA66 LoRaWAN Module =
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 11  
10 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
13 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
15 15  
16 -(((
17 -[[image:image-20220715000826-2.png||height="145" width="220"]]
18 -)))
15 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
19 19  
20 -(((
21 -
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 -)))
27 -
28 -(((
29 -(((
30 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 -)))
32 -)))
33 -
34 -(((
35 -(((
36 36  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 -)))
38 -)))
39 39  
40 -(((
41 -(((
42 42  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 -)))
44 -)))
45 45  
46 -(((
47 -(((
48 48  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
49 -)))
50 -)))
51 51  
52 52  
53 -
54 54  == 1.2  Features ==
55 55  
26 +* Support LoRaWAN v1.0.4 protocol
27 +* Support peer-to-peer protocol
28 +* TCXO crystal to ensure RF performance on low temperature
29 +* SMD Antenna pad and i-pex antenna connector
30 +* Available in different frequency LoRaWAN frequency bands.
31 +* World-wide unique OTAA keys.
32 +* AT Command via UART-TTL interface
33 +* Firmware upgradable via UART interface
34 +* Ultra-long RF range
56 56  
36 +
37 +
38 +== 1.3  Specification ==
39 +
40 +* CPU: 32-bit 48 MHz
41 +* Flash: 256KB
42 +* RAM: 64KB
43 +* Input Power Range: 1.8v ~~ 3.7v
44 +* Power Consumption: < 4uA.
45 +* Frequency Range: 150 MHz ~~ 960 MHz
46 +* Maximum Power +22 dBm constant RF output
47 +* High sensitivity: -148 dBm
48 +* Temperature:
49 +** Storage: -55 ~~ +125℃
50 +** Operating: -40 ~~ +85℃
51 +* Humidity:
52 +** Storage: 5 ~~ 95% (Non-Condensing)
53 +** Operating: 10 ~~ 95% (Non-Condensing)
54 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
55 +* LoRa Rx current: <9 mA
56 +* I/O Voltage: 3.3v
57 +
58 +
59 +
60 +== 1.4  AT Command ==
61 +
62 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
63 +
64 +
65 +== 1.5  Dimension ==
66 +
67 +[[image:image-20220517072526-1.png]]
68 +
69 +
70 +
71 +== 1.6  Pin Mapping ==
72 +
73 +
74 +[[image:image-20220523101537-1.png]]
75 +
76 +
77 +
78 +== 1.7  Land Pattern ==
79 +
80 +[[image:image-20220517072821-2.png]]
81 +
82 +
83 +
84 += 2.  LA66 LoRaWAN Shield =
85 +
86 +
87 +== 2.1  Overview ==
88 +
89 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
90 +
91 +
92 +== 2.2  Features ==
93 +
57 57  * Arduino Shield base on LA66 LoRaWAN module
58 -* Support LoRaWAN v1.0.3 protocol
95 +* Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 61  * SMA connector
... ... @@ -67,9 +67,8 @@
67 67  
68 68  
69 69  
70 -== 1.3  Specification ==
107 +== 2.3  Specification ==
71 71  
72 -
73 73  * CPU: 32-bit 48 MHz
74 74  * Flash: 256KB
75 75  * RAM: 64KB
... ... @@ -90,248 +90,311 @@
90 90  
91 91  
92 92  
93 -== 1.4  Pin Mapping & LED ==
129 +== 2.4  Pin Mapping & LED ==
94 94  
95 95  
96 -[[image:image-20220817085048-1.png||height="533" width="734"]]
97 97  
133 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
98 98  
99 99  
100 -~1. The LED lights up red when there is an upstream data packet
101 -2. When the network is successfully connected, the green light will be on for 5 seconds
102 -3. Purple light on when receiving downlink data packets
103 103  
137 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
104 104  
105 -[[image:image-20220820112305-1.png||height="515" width="749"]]
106 106  
107 107  
141 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
108 108  
109 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
110 110  
111 111  
112 -**Show connection diagram：**
145 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
113 113  
114 114  
115 -[[image:image-20220723170210-2.png||height="908" width="681"]]
148 +=== 2.8.1  Items needed for update ===
116 116  
150 +1. LA66 LoRaWAN Shield
151 +1. Arduino
152 +1. USB TO TTL Adapter
117 117  
154 +[[image:image-20220602100052-2.png||height="385" width="600"]]
118 118  
119 -(% style="color:blue" %)**1.  open Arduino IDE**
120 120  
157 +=== 2.8.2  Connection ===
121 121  
122 -[[image:image-20220723170545-4.png]]
123 123  
160 +[[image:image-20220602101311-3.png||height="276" width="600"]]
124 124  
125 125  
126 -(% style="color:blue" %)**2.  Open project**
163 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
127 127  
165 +(% style="background-color:yellow" %)**GND  <-> GND
166 +TXD  <->  TXD
167 +RXD  <->  RXD**
128 128  
129 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
130 130  
170 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
131 131  
132 -[[image:image-20220726135239-1.png]]
172 +Connect USB TTL Adapter to PC after connecting the wires
133 133  
134 134  
175 +[[image:image-20220602102240-4.png||height="304" width="600"]]
135 135  
136 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
137 137  
178 +=== 2.8.3  Upgrade steps ===
138 138  
139 -[[image:image-20220726135356-2.png]]
140 140  
181 +==== 1.  Switch SW1 to put in ISP position ====
141 141  
142 142  
143 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
184 +[[image:image-20220602102824-5.png||height="306" width="600"]]
144 144  
145 145  
146 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
147 147  
188 +==== 2.  Press the RST switch once ====
148 148  
149 149  
150 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
191 +[[image:image-20220602104701-12.png||height="285" width="600"]]
151 151  
152 152  
153 -(% style="color:blue" %)**1.  Open project**
154 154  
195 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
155 155  
156 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
157 157  
198 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
158 158  
159 -[[image:image-20220723172502-8.png]]
160 160  
201 +[[image:image-20220602103227-6.png]]
161 161  
162 162  
163 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
204 +[[image:image-20220602103357-7.png]]
164 164  
165 165  
166 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
167 167  
208 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
209 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
168 168  
169 169  
170 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
212 +[[image:image-20220602103844-8.png]]
171 171  
172 172  
173 -(% style="color:blue" %)**1.  Open project**
174 174  
216 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
217 +(% style="color:blue" %)**3. Select the bin file to burn**
175 175  
176 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
177 177  
220 +[[image:image-20220602104144-9.png]]
178 178  
179 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
180 180  
223 +[[image:image-20220602104251-10.png]]
181 181  
182 182  
183 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
226 +[[image:image-20220602104402-11.png]]
184 184  
185 185  
186 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
187 187  
230 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
231 +(% style="color:blue" %)**4. Click to start the download**
188 188  
233 +[[image:image-20220602104923-13.png]]
189 189  
190 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
191 191  
192 192  
193 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
237 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
238 +(% style="color:blue" %)**5. Check update process**
194 194  
195 195  
196 -[[image:image-20220723175700-12.png||height="602" width="995"]]
241 +[[image:image-20220602104948-14.png]]
197 197  
198 198  
199 199  
200 -== 1.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
245 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
246 +(% style="color:blue" %)**The following picture shows that the burning is successful**
201 201  
248 +[[image:image-20220602105251-15.png]]
202 202  
203 -=== 1.8.1  Items needed for update ===
204 204  
205 205  
206 -1. LA66 LoRaWAN Shield
207 -1. Arduino
208 -1. USB TO TTL Adapter
252 += 3.  LA66 USB LoRaWAN Adapter =
209 209  
210 210  
211 -[[image:image-20220602100052-2.png||height="385" width="600"]]
255 +== 3.1  Overview ==
212 212  
257 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
213 213  
214 214  
215 -=== 1.8.2  Connection ===
260 +== 3.2  Features ==
216 216  
262 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
263 +* Ultra-long RF range
264 +* Support LoRaWAN v1.0.4 protocol
265 +* Support peer-to-peer protocol
266 +* TCXO crystal to ensure RF performance on low temperature
267 +* Spring RF antenna
268 +* Available in different frequency LoRaWAN frequency bands.
269 +* World-wide unique OTAA keys.
270 +* AT Command via UART-TTL interface
271 +* Firmware upgradable via UART interface
217 217  
218 -[[image:image-20220602101311-3.png||height="276" width="600"]]
219 219  
220 220  
221 -(((
222 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
223 -)))
275 +== 3.3  Specification ==
224 224  
225 -(((
226 -(% style="background-color:yellow" %)**GND  <-> GND
227 -TXD  <->  TXD
228 -RXD  <->  RXD**
229 -)))
277 +* CPU: 32-bit 48 MHz
278 +* Flash: 256KB
279 +* RAM: 64KB
280 +* Input Power Range: 5v
281 +* Frequency Range: 150 MHz ~~ 960 MHz
282 +* Maximum Power +22 dBm constant RF output
283 +* High sensitivity: -148 dBm
284 +* Temperature:
285 +** Storage: -55 ~~ +125℃
286 +** Operating: -40 ~~ +85℃
287 +* Humidity:
288 +** Storage: 5 ~~ 95% (Non-Condensing)
289 +** Operating: 10 ~~ 95% (Non-Condensing)
290 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
291 +* LoRa Rx current: <9 mA
230 230  
231 231  
232 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
233 233  
234 -Connect USB TTL Adapter to PC after connecting the wires
295 +== 3.4  Pin Mapping & LED ==
235 235  
236 236  
237 -[[image:image-20220602102240-4.png||height="304" width="600"]]
238 238  
299 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
239 239  
240 240  
241 -=== 1.8.3  Upgrade steps ===
302 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
242 242  
243 243  
305 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
244 244  
245 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
246 246  
308 +[[image:image-20220602171217-1.png||height="538" width="800"]]
247 247  
248 -[[image:image-20220602102824-5.png||height="306" width="600"]]
249 249  
311 +Open the serial port tool
250 250  
313 +[[image:image-20220602161617-8.png]]
251 251  
252 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
315 +[[image:image-20220602161718-9.png||height="457" width="800"]]
253 253  
254 254  
255 -[[image:image-20220817085447-1.png]]
256 256  
319 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
257 257  
321 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
258 258  
259 259  
260 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
324 +[[image:image-20220602161935-10.png||height="498" width="800"]]
261 261  
262 262  
263 -(((
264 -(% style="color:blue" %)**1. Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
265 -)))
266 266  
328 +(% style="color:blue" %)**3. See Uplink Command**
267 267  
268 -[[image:image-20220602103227-6.png]]
330 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
269 269  
332 +example: AT+SENDB=01,02,8,05820802581ea0a5
270 270  
271 -[[image:image-20220602103357-7.png]]
334 +[[image:image-20220602162157-11.png||height="497" width="800"]]
272 272  
273 273  
274 274  
275 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
276 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
338 +(% style="color:blue" %)**4. Check to see if TTN received the message**
277 277  
340 +[[image:image-20220602162331-12.png||height="420" width="800"]]
278 278  
279 -[[image:image-20220602103844-8.png]]
280 280  
281 281  
344 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
282 282  
283 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
284 -(% style="color:blue" %)**3. Select the bin file to burn**
285 285  
347 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
286 286  
287 -[[image:image-20220602104144-9.png]]
288 288  
350 +(% style="color:red" %)**Preconditions:**
289 289  
290 -[[image:image-20220602104251-10.png]]
352 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
291 291  
354 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
292 292  
293 -[[image:image-20220602104402-11.png]]
294 294  
295 295  
358 +(% style="color:blue" %)**Steps for usage:**
296 296  
297 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
298 -(% style="color:blue" %)**4. Click to start the download**
360 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
299 299  
300 -[[image:image-20220602104923-13.png]]
362 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
301 301  
364 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
302 302  
303 303  
304 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
305 -(% style="color:blue" %)**5. Check update process**
306 306  
368 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
307 307  
308 -[[image:image-20220602104948-14.png]]
309 309  
371 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
310 310  
311 311  
312 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
313 -(% style="color:blue" %)**The following picture shows that the burning is successful**
374 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
314 314  
315 -[[image:image-20220602105251-15.png]]
376 +[[image:image-20220602171233-2.png||height="538" width="800"]]
316 316  
317 317  
318 318  
319 -= 2.  FAQ =
380 +(% style="color:blue" %)**2. Install Minicom in RPi.**
320 320  
382 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
321 321  
322 -== 2.1  How to Compile Source Code for LA66? ==
384 + (% style="background-color:yellow" %)**apt update**
323 323  
386 + (% style="background-color:yellow" %)**apt install minicom**
324 324  
325 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
326 326  
389 +Use minicom to connect to the RPI's terminal
327 327  
391 +[[image:image-20220602153146-3.png||height="439" width="500"]]
328 328  
329 -= 3.  Order Info =
330 330  
331 331  
332 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
395 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**(%%)
396 +(% style="color:blue" %)The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
333 333  
398 +[[image:image-20220602154928-5.png||height="436" width="500"]]
334 334  
400 +
401 +
402 +(% style="color:blue" %)**4. Send Uplink message**
403 +
404 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
405 +
406 +example: AT+SENDB=01,02,8,05820802581ea0a5
407 +
408 +
409 +[[image:image-20220602160339-6.png||height="517" width="600"]]
410 +
411 +
412 +
413 +Check to see if TTN received the message
414 +
415 +[[image:image-20220602160627-7.png||height="369" width="800"]]
416 +
417 +
418 +
419 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
420 +
421 +
422 +
423 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
424 +
425 +
426 +
427 +
428 += 4.  Order Info =
429 +
430 +
431 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
432 +
433 +
335 335  (% style="color:blue" %)**XXX**(%%): The default frequency band
336 336  
337 337  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -346,9 +346,9 @@
346 346  
347 347  
348 348  
349 -= 4.  Reference =
350 350  
449 += 5.  Reference =
351 351  
352 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
451 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
353 353  
354 354  
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -784.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0