Skip to Content
Last modified by Xiaoling on 2023/05/26 14:19
From version 151.3
edited by Xiaoling
on 2022/08/22 16:15
Change comment: There is no comment for this version
To version 75.1
edited by Edwin Chen
on 2022/07/03 00:21
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,64 +1,28 @@
1 -
2 -
3 -**Table of Contents:**
4 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
5 5  {{toc/}}
3 +{{/box}}
6 6  
5 += LA66 LoRaWAN Module =
7 7  
7 +== What is LA66 LoRaWAN Module ==
8 8  
9 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
11 11  
12 -
13 -== 1.1  Overview ==
14 -
15 -
16 -(((
17 -[[image:image-20220715000826-2.png||height="145" width="220"]]
18 -)))
19 -
20 -(((
21 -
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 -)))
27 -
28 -(((
29 -(((
30 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 -)))
32 -)))
33 -
34 -(((
35 -(((
36 36  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 -)))
38 -)))
39 39  
40 -(((
41 -(((
42 42  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 -)))
44 -)))
45 45  
46 -(((
47 -(((
48 48  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
49 -)))
50 -)))
51 51  
52 52  
20 +== Features ==
53 53  
54 -== 1.2  Features ==
55 -
56 -
57 -* Arduino Shield base on LA66 LoRaWAN module
58 -* Support LoRaWAN v1.0.3 protocol
22 +* Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 -* SMA connector
25 +* SMD Antenna pad and i-pex antenna connector
62 62  * Available in different frequency LoRaWAN frequency bands.
63 63  * World-wide unique OTAA keys.
64 64  * AT Command via UART-TTL interface
... ... @@ -65,11 +65,8 @@
65 65  * Firmware upgradable via UART interface
66 66  * Ultra-long RF range
67 67  
32 +== Specification ==
68 68  
69 -
70 -== 1.3  Specification ==
71 -
72 -
73 73  * CPU: 32-bit 48 MHz
74 74  * Flash: 256KB
75 75  * RAM: 64KB
... ... @@ -88,267 +88,334 @@
88 88  * LoRa Rx current: <9 mA
89 89  * I/O Voltage: 3.3v
90 90  
52 +== AT Command ==
91 91  
54 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
92 92  
93 -== 1.4  Pin Mapping & LED ==
94 94  
57 +== Dimension ==
95 95  
96 -[[image:image-20220817085048-1.png||height="533" width="734"]]
59 +[[image:image-20220517072526-1.png]]
97 97  
98 98  
62 +== Pin Mapping ==
99 99  
100 -~1. The LED lights up red when there is an upstream data packet
101 -2. When the network is successfully connected, the green light will be on for 5 seconds
102 -3. Purple light on when receiving downlink data packets
64 +[[image:image-20220523101537-1.png]]
103 103  
66 +== Land Pattern ==
104 104  
105 -[[image:image-20220820112305-1.png||height="515" width="749"]]
68 +[[image:image-20220517072821-2.png]]
106 106  
107 107  
71 +== Order Info ==
108 108  
109 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
73 +Part Number: **LA66-XXX**
110 110  
75 +**XX**: The default frequency band
111 111  
112 -**Show connection diagram：**
77 +* **AS923**: LoRaWAN AS923 band
78 +* **AU915**: LoRaWAN AU915 band
79 +* **EU433**: LoRaWAN EU433 band
80 +* **EU868**: LoRaWAN EU868 band
81 +* **KR920**: LoRaWAN KR920 band
82 +* **US915**: LoRaWAN US915 band
83 +* **IN865**: LoRaWAN IN865 band
84 +* **CN470**: LoRaWAN CN470 band
85 +* **PP**: Peer to Peer LoRa Protocol
113 113  
87 += LA66 LoRaWAN Shield =
114 114  
115 -[[image:image-20220723170210-2.png||height="908" width="681"]]
89 +== Overview ==
116 116  
91 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
117 117  
118 118  
119 -(% style="color:blue" %)**1.  open Arduino IDE**
94 +== Features ==
120 120  
96 +* Arduino Shield base on LA66 LoRaWAN module
97 +* Support LoRaWAN v1.0.4 protocol
98 +* Support peer-to-peer protocol
99 +* TCXO crystal to ensure RF performance on low temperature
100 +* SMA connector
101 +* Available in different frequency LoRaWAN frequency bands.
102 +* World-wide unique OTAA keys.
103 +* AT Command via UART-TTL interface
104 +* Firmware upgradable via UART interface
105 +* Ultra-long RF range
121 121  
122 -[[image:image-20220723170545-4.png]]
107 +== Specification ==
123 123  
109 +* CPU: 32-bit 48 MHz
110 +* Flash: 256KB
111 +* RAM: 64KB
112 +* Input Power Range: 1.8v ~~ 3.7v
113 +* Power Consumption: < 4uA.
114 +* Frequency Range: 150 MHz ~~ 960 MHz
115 +* Maximum Power +22 dBm constant RF output
116 +* High sensitivity: -148 dBm
117 +* Temperature:
118 +** Storage: -55 ~~ +125℃
119 +** Operating: -40 ~~ +85℃
120 +* Humidity:
121 +** Storage: 5 ~~ 95% (Non-Condensing)
122 +** Operating: 10 ~~ 95% (Non-Condensing)
123 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
124 +* LoRa Rx current: <9 mA
125 +* I/O Voltage: 3.3v
124 124  
127 +== Pin Mapping & LED ==
125 125  
126 -(% style="color:blue" %)**2.  Open project**
129 +== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
127 127  
131 +== Example: Join TTN network and send an uplink message, get downlink message. ==
128 128  
129 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
133 +== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
130 130  
135 +== Upgrade Firmware of LA66 LoRaWAN Shield ==
131 131  
132 -[[image:image-20220726135239-1.png]]
137 +=== Items needed for update ===
133 133  
139 +1. LA66 LoRaWAN Shield
140 +1. Arduino
141 +1. USB TO TTL Adapter
134 134  
143 +[[image:image-20220602100052-2.png||height="385" width="600"]]
135 135  
136 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
137 137  
146 +=== Connection ===
138 138  
139 -[[image:image-20220726135356-2.png]]
148 +[[image:image-20220602101311-3.png||height="276" width="600"]]
140 140  
150 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
151 +**GND  <-> GND
152 +TXD  <-> TXD
153 +RXD  <-> RXD**
141 141  
155 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield.
142 142  
143 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
157 +Connect USB TTL Adapter to PC after connecting the wires
144 144  
145 145  
146 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
160 +[[image:image-20220602102240-4.png||height="304" width="600"]]
147 147  
148 148  
163 +=== Upgrade steps ===
149 149  
150 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
165 +==== Switch SW1 to put in ISP position ====
151 151  
167 +[[image:image-20220602102824-5.png||height="306" width="600"]]
152 152  
153 -(% style="color:blue" %)**1.  Open project**
154 154  
170 +==== Press the RST switch once ====
155 155  
156 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
172 +[[image:image-20220602104701-12.png||height="285" width="600"]]
157 157  
158 158  
159 -[[image:image-20220723172502-8.png]]
175 +==== Open the Upgrade tool (Tremo Programmer) in PC ====
160 160  
177 +Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
161 161  
179 +[[image:image-20220602103227-6.png]]
162 162  
163 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
181 +[[image:image-20220602103357-7.png]]
164 164  
183 +===== Select the COM port corresponding to USB TTL =====
165 165  
166 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
185 +[[image:image-20220602103844-8.png]]
167 167  
187 +===== Select the bin file to burn =====
168 168  
189 +[[image:image-20220602104144-9.png]]
169 169  
170 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
191 +[[image:image-20220602104251-10.png]]
171 171  
193 +[[image:image-20220602104402-11.png]]
172 172  
173 -(% style="color:blue" %)**1.  Open project**
195 +===== Click to start the download =====
174 174  
197 +[[image:image-20220602104923-13.png]]
175 175  
176 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
199 +===== The following figure appears to prove that the burning is in progress =====
177 177  
201 +[[image:image-20220602104948-14.png]]
178 178  
179 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
203 +===== The following picture appears to prove that the burning is successful =====
180 180  
205 +[[image:image-20220602105251-15.png]]
181 181  
182 182  
183 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
208 +== Order Info ==
184 184  
210 +Part Number: **LA66-LoRaWAN-Shield-XXX**
185 185  
186 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
212 +**XX**: The default frequency band
187 187  
214 +* **AS923**: LoRaWAN AS923 band
215 +* **AU915**: LoRaWAN AU915 band
216 +* **EU433**: LoRaWAN EU433 band
217 +* **EU868**: LoRaWAN EU868 band
218 +* **KR920**: LoRaWAN KR920 band
219 +* **US915**: LoRaWAN US915 band
220 +* **IN865**: LoRaWAN IN865 band
221 +* **CN470**: LoRaWAN CN470 band
222 +* **PP**: Peer to Peer LoRa Protocol
188 188  
224 +== Package Info ==
189 189  
190 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
226 +* LA66 LoRaWAN Shield x 1
227 +* RF Antenna x 1
191 191  
192 192  
193 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
230 += LA66 USB LoRaWAN Adapter =
194 194  
232 +== Overview ==
195 195  
196 -[[image:image-20220723175700-12.png||height="602" width="995"]]
234 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
197 197  
198 198  
237 +== Features ==
199 199  
200 -== 1.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
239 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
240 +* Ultra-long RF range
241 +* Support LoRaWAN v1.0.4 protocol
242 +* Support peer-to-peer protocol
243 +* TCXO crystal to ensure RF performance on low temperature
244 +* Spring RF antenna
245 +* Available in different frequency LoRaWAN frequency bands.
246 +* World-wide unique OTAA keys.
247 +* AT Command via UART-TTL interface
248 +* Firmware upgradable via UART interface
201 201  
250 +== Specification ==
202 202  
203 -=== 1.8.1  Items needed for update ===
252 +* CPU: 32-bit 48 MHz
253 +* Flash: 256KB
254 +* RAM: 64KB
255 +* Input Power Range: 5v
256 +* Frequency Range: 150 MHz ~~ 960 MHz
257 +* Maximum Power +22 dBm constant RF output
258 +* High sensitivity: -148 dBm
259 +* Temperature:
260 +** Storage: -55 ~~ +125℃
261 +** Operating: -40 ~~ +85℃
262 +* Humidity:
263 +** Storage: 5 ~~ 95% (Non-Condensing)
264 +** Operating: 10 ~~ 95% (Non-Condensing)
265 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
266 +* LoRa Rx current: <9 mA
204 204  
268 +== Pin Mapping & LED ==
205 205  
206 -1. LA66 LoRaWAN Shield
207 -1. Arduino
208 -1. USB TO TTL Adapter
270 +== Example Send & Get Messages via LoRaWAN in PC ==
209 209  
272 +Connect the LA66 LoRa Shield to the PC
210 210  
211 -[[image:image-20220602100052-2.png||height="385" width="600"]]
274 +[[image:image-20220602171217-1.png||height="615" width="915"]]
212 212  
276 +Open the serial port tool
213 213  
278 +[[image:image-20220602161617-8.png]]
214 214  
215 -=== 1.8.2  Connection ===
280 +[[image:image-20220602161718-9.png||height="529" width="927"]]
216 216  
282 +Press the reset switch RST on the LA66 LoRa Shield.
217 217  
218 -[[image:image-20220602101311-3.png||height="276" width="600"]]
284 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
219 219  
286 +[[image:image-20220602161935-10.png]]
220 220  
221 -(((
222 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
223 -)))
288 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
224 224  
225 -(((
226 -(% style="background-color:yellow" %)**GND  <-> GND
227 -TXD  <->  TXD
228 -RXD  <->  RXD**
229 -)))
290 +example: AT+SENDB=01,02,8,05820802581ea0a5
230 230  
292 +[[image:image-20220602162157-11.png]]
231 231  
232 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
294 +Check to see if TTN received the message
233 233  
234 -Connect USB TTL Adapter to PC after connecting the wires
296 +[[image:image-20220602162331-12.png||height="547" width="1044"]]
235 235  
298 +== Example Send & Get Messages via LoRaWAN in RPi ==
236 236  
237 -[[image:image-20220602102240-4.png||height="304" width="600"]]
300 +Connect the LA66 LoRa Shield to the RPI
238 238  
302 +[[image:image-20220602171233-2.png||height="592" width="881"]]
239 239  
304 +Log in to the RPI's terminal and connect to the serial port
240 240  
241 -=== 1.8.3  Upgrade steps ===
306 +[[image:image-20220602153146-3.png]]
242 242  
308 +Press the reset switch RST on the LA66 LoRa Shield.
309 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
243 243  
311 +[[image:image-20220602154928-5.png]]
244 244  
245 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
313 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
246 246  
315 +example: AT+SENDB=01,02,8,05820802581ea0a5
247 247  
248 -[[image:image-20220602102824-5.png||height="306" width="600"]]
317 +[[image:image-20220602160339-6.png]]
249 249  
319 +Check to see if TTN received the message
250 250  
321 +[[image:image-20220602160627-7.png||height="468" width="1013"]]
251 251  
252 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
323 +=== Install Minicom ===
253 253  
325 +Enter the following command in the RPI terminal
254 254  
255 -[[image:image-20220817085447-1.png]]
327 +apt update
256 256  
329 +[[image:image-20220602143155-1.png]]
257 257  
331 +apt install minicom
258 258  
333 +[[image:image-20220602143744-2.png]]
259 259  
260 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
335 +=== Send PC's CPU/RAM usage to TTN via script. ===
261 261  
337 +==== Take python as an example： ====
262 262  
263 -(((
264 -(% style="color:blue" %)**1. Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
265 -)))
339 +===== Preconditions: =====
266 266  
341 +1.LA66 USB LoRaWAN Adapter works fine
267 267  
268 -[[image:image-20220602103227-6.png]]
343 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
269 269  
345 +===== Steps for usage =====
270 270  
271 -[[image:image-20220602103357-7.png]]
347 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
272 272  
349 +2.Run the script and see the TTN
273 273  
351 +[[image:image-20220602115852-3.png]]
274 274  
275 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
276 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
277 277  
278 278  
279 -[[image:image-20220602103844-8.png]]
355 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
280 280  
281 281  
358 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
282 282  
283 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
284 -(% style="color:blue" %)**3. Select the bin file to burn**
285 285  
286 286  
287 -[[image:image-20220602104144-9.png]]
362 +== Order Info ==
288 288  
364 +Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
289 289  
290 -[[image:image-20220602104251-10.png]]
366 +**XX**: The default frequency band
291 291  
368 +* **AS923**: LoRaWAN AS923 band
369 +* **AU915**: LoRaWAN AU915 band
370 +* **EU433**: LoRaWAN EU433 band
371 +* **EU868**: LoRaWAN EU868 band
372 +* **KR920**: LoRaWAN KR920 band
373 +* **US915**: LoRaWAN US915 band
374 +* **IN865**: LoRaWAN IN865 band
375 +* **CN470**: LoRaWAN CN470 band
376 +* **PP**: Peer to Peer LoRa Protocol
292 292  
293 -[[image:image-20220602104402-11.png]]
378 +== Package Info ==
294 294  
380 +* LA66 USB LoRaWAN Adapter x 1
295 295  
296 -
297 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
298 -(% style="color:blue" %)**4. Click to start the download**
299 -
300 -[[image:image-20220602104923-13.png]]
301 -
302 -
303 -
304 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
305 -(% style="color:blue" %)**5. Check update process**
306 -
307 -
308 -[[image:image-20220602104948-14.png]]
309 -
310 -
311 -
312 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
313 -(% style="color:blue" %)**The following picture shows that the burning is successful**
314 -
315 -[[image:image-20220602105251-15.png]]
316 -
317 -
318 -
319 -= 2.  FAQ =
320 -
321 -
322 -== 2.1  How to Compile Source Code for LA66? ==
323 -
324 -
325 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
326 -
327 -
328 -
329 -= 3.  Order Info =
330 -
331 -
332 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
333 -
334 -
335 -(% style="color:blue" %)**XXX**(%%): The default frequency band
336 -
337 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
338 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
339 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
340 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
341 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
342 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
343 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
344 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
345 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
346 -
347 -
348 -
349 -= 4.  Reference =
350 -
351 -
352 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
353 -
354 354  
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -784.9 KB
Content