Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 151.2 >
edited by Xiaoling
on 2022/08/22 16:13
To version < 88.2 >
edited by Edwin Chen
on 2022/07/15 00:07
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -6,59 +6,41 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 11  
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
15 -
16 16  (((
17 -[[image:image-20220715000826-2.png||height="145" width="220"]]
18 -)))
16 +[[image:image-20220715000242-1.png||height="110" width="132"]]
19 19  
20 -(((
21 -
18 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
22 22  )))
23 23  
24 24  (((
25 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
22 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 26  )))
27 27  
28 28  (((
29 -(((
30 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 -)))
32 -)))
33 -
34 -(((
35 -(((
36 36  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 37  )))
38 -)))
39 39  
40 40  (((
41 -(((
42 42  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 43  )))
44 -)))
45 45  
46 46  (((
47 -(((
48 48  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
49 49  )))
50 -)))
51 51  
52 52  
53 -
54 54  == 1.2  Features ==
55 55  
56 -
57 -* Arduino Shield base on LA66 LoRaWAN module
58 -* Support LoRaWAN v1.0.3 protocol
40 +* Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 -* SMA connector
43 +* SMD Antenna pad and i-pex antenna connector
62 62  * Available in different frequency LoRaWAN frequency bands.
63 63  * World-wide unique OTAA keys.
64 64  * AT Command via UART-TTL interface
... ... @@ -66,11 +66,75 @@
66 66  * Ultra-long RF range
67 67  
68 68  
51 +== 1.3  Specification ==
69 69  
53 +* CPU: 32-bit 48 MHz
54 +* Flash: 256KB
55 +* RAM: 64KB
56 +* Input Power Range: 1.8v ~~ 3.7v
57 +* Power Consumption: < 4uA.
58 +* Frequency Range: 150 MHz ~~ 960 MHz
59 +* Maximum Power +22 dBm constant RF output
60 +* High sensitivity: -148 dBm
61 +* Temperature:
62 +** Storage: -55 ~~ +125℃
63 +** Operating: -40 ~~ +85℃
64 +* Humidity:
65 +** Storage: 5 ~~ 95% (Non-Condensing)
66 +** Operating: 10 ~~ 95% (Non-Condensing)
67 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
68 +* LoRa Rx current: <9 mA
69 +* I/O Voltage: 3.3v
70 70  
71 -== 1.3  Specification ==
72 72  
72 +== 1.4  AT Command ==
73 73  
74 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
75 +
76 +
77 +== 1.5  Dimension ==
78 +
79 +[[image:image-20220517072526-1.png]]
80 +
81 +
82 +
83 +== 1.6  Pin Mapping ==
84 +
85 +
86 +[[image:image-20220523101537-1.png]]
87 +
88 +
89 +
90 +== 1.7  Land Pattern ==
91 +
92 +[[image:image-20220517072821-2.png]]
93 +
94 +
95 +
96 += 2.  LA66 LoRaWAN Shield =
97 +
98 +
99 +== 2.1  Overview ==
100 +
101 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
102 +
103 +
104 +== 2.2  Features ==
105 +
106 +* Arduino Shield base on LA66 LoRaWAN module
107 +* Support LoRaWAN v1.0.4 protocol
108 +* Support peer-to-peer protocol
109 +* TCXO crystal to ensure RF performance on low temperature
110 +* SMA connector
111 +* Available in different frequency LoRaWAN frequency bands.
112 +* World-wide unique OTAA keys.
113 +* AT Command via UART-TTL interface
114 +* Firmware upgradable via UART interface
115 +* Ultra-long RF range
116 +
117 +
118 +== 2.3  Specification ==
119 +
74 74  * CPU: 32-bit 48 MHz
75 75  * Flash: 256KB
76 76  * RAM: 64KB
... ... @@ -90,247 +90,319 @@
90 90  * I/O Voltage: 3.3v
91 91  
92 92  
139 +== 2.4  Pin Mapping & LED ==
93 93  
94 94  
95 -== 1.4  Pin Mapping & LED ==
96 96  
143 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
97 97  
98 -[[image:image-20220817085048-1.png||height="533" width="734"]]
99 99  
100 100  
147 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
101 101  
102 -~1. The LED lights up red when there is an upstream data packet
103 -2. When the network is successfully connected, the green light will be on for 5 seconds
104 -3. Purple light on when receiving downlink data packets
105 105  
106 106  
107 -[[image:image-20220820112305-1.png||height="515" width="749"]]
151 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
108 108  
109 109  
110 110  
111 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
155 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
112 112  
113 113  
114 -**Show connection diagram：**
158 +=== 2.8.1  Items needed for update ===
115 115  
160 +1. LA66 LoRaWAN Shield
161 +1. Arduino
162 +1. USB TO TTL Adapter
116 116  
117 -[[image:image-20220723170210-2.png||height="908" width="681"]]
118 118  
119 119  
166 +[[image:image-20220602100052-2.png||height="385" width="600"]]
120 120  
121 -(% style="color:blue" %)**1.  open Arduino IDE**
122 122  
169 +=== 2.8.2  Connection ===
123 123  
124 -[[image:image-20220723170545-4.png]]
125 125  
172 +[[image:image-20220602101311-3.png||height="276" width="600"]]
126 126  
127 127  
128 -(% style="color:blue" %)**2.  Open project**
175 +(((
176 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
177 +)))
129 129  
179 +(((
180 +(% style="background-color:yellow" %)**GND  <-> GND
181 +TXD  <->  TXD
182 +RXD  <->  RXD**
183 +)))
130 130  
131 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
132 132  
133 -[[image:image-20220726135239-1.png]]
186 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
134 134  
188 +Connect USB TTL Adapter to PC after connecting the wires
135 135  
136 136  
137 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
191 +[[image:image-20220602102240-4.png||height="304" width="600"]]
138 138  
139 -[[image:image-20220726135356-2.png]]
140 140  
194 +=== 2.8.3  Upgrade steps ===
141 141  
142 142  
143 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
197 +==== 1.  Switch SW1 to put in ISP position ====
144 144  
145 145  
146 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
200 +[[image:image-20220602102824-5.png||height="306" width="600"]]
147 147  
148 148  
149 149  
150 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
204 +==== 2.  Press the RST switch once ====
151 151  
152 152  
153 -(% style="color:blue" %)**1.  Open project**
207 +[[image:image-20220602104701-12.png||height="285" width="600"]]
154 154  
155 155  
156 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
157 157  
211 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
158 158  
159 -[[image:image-20220723172502-8.png]]
160 160  
214 +(((
215 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
216 +)))
161 161  
162 162  
163 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
219 +[[image:image-20220602103227-6.png]]
164 164  
165 165  
166 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
222 +[[image:image-20220602103357-7.png]]
167 167  
168 168  
169 169  
170 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
226 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
227 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
171 171  
172 172  
173 -(% style="color:blue" %)**1.  Open project**
230 +[[image:image-20220602103844-8.png]]
174 174  
175 175  
176 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
177 177  
234 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
235 +(% style="color:blue" %)**3. Select the bin file to burn**
178 178  
179 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
180 180  
238 +[[image:image-20220602104144-9.png]]
181 181  
182 182  
183 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
241 +[[image:image-20220602104251-10.png]]
184 184  
185 185  
186 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
244 +[[image:image-20220602104402-11.png]]
187 187  
188 188  
189 189  
190 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
248 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
249 +(% style="color:blue" %)**4. Click to start the download**
191 191  
192 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
251 +[[image:image-20220602104923-13.png]]
193 193  
194 -[[image:image-20220723175700-12.png||height="602" width="995"]]
195 195  
196 196  
255 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
256 +(% style="color:blue" %)**5. Check update process**
197 197  
198 -== 1.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
199 199  
259 +[[image:image-20220602104948-14.png]]
200 200  
201 -=== 1.8.1  Items needed for update ===
202 202  
203 203  
204 -1. LA66 LoRaWAN Shield
205 -1. Arduino
206 -1. USB TO TTL Adapter
263 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
264 +(% style="color:blue" %)**The following picture shows that the burning is successful**
207 207  
266 +[[image:image-20220602105251-15.png]]
208 208  
209 209  
210 -[[image:image-20220602100052-2.png||height="385" width="600"]]
211 211  
270 += 3.  LA66 USB LoRaWAN Adapter =
212 212  
213 213  
214 -=== 1.8.2  Connection ===
273 +== 3.1  Overview ==
215 215  
275 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
216 216  
217 -[[image:image-20220602101311-3.png||height="276" width="600"]]
218 218  
278 +== 3.2  Features ==
219 219  
220 -(((
221 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
222 -)))
280 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
281 +* Ultra-long RF range
282 +* Support LoRaWAN v1.0.4 protocol
283 +* Support peer-to-peer protocol
284 +* TCXO crystal to ensure RF performance on low temperature
285 +* Spring RF antenna
286 +* Available in different frequency LoRaWAN frequency bands.
287 +* World-wide unique OTAA keys.
288 +* AT Command via UART-TTL interface
289 +* Firmware upgradable via UART interface
223 223  
224 -(((
225 -(% style="background-color:yellow" %)**GND  <-> GND
226 -TXD  <->  TXD
227 -RXD  <->  RXD**
228 -)))
229 229  
292 +== 3.3  Specification ==
230 230  
231 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
294 +* CPU: 32-bit 48 MHz
295 +* Flash: 256KB
296 +* RAM: 64KB
297 +* Input Power Range: 5v
298 +* Frequency Range: 150 MHz ~~ 960 MHz
299 +* Maximum Power +22 dBm constant RF output
300 +* High sensitivity: -148 dBm
301 +* Temperature:
302 +** Storage: -55 ~~ +125℃
303 +** Operating: -40 ~~ +85℃
304 +* Humidity:
305 +** Storage: 5 ~~ 95% (Non-Condensing)
306 +** Operating: 10 ~~ 95% (Non-Condensing)
307 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
308 +* LoRa Rx current: <9 mA
232 232  
233 -Connect USB TTL Adapter to PC after connecting the wires
234 234  
311 +== 3.4  Pin Mapping & LED ==
235 235  
236 -[[image:image-20220602102240-4.png||height="304" width="600"]]
237 237  
238 238  
315 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
239 239  
240 -=== 1.8.3  Upgrade steps ===
241 241  
318 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
242 242  
243 243  
244 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
321 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
245 245  
246 246  
247 -[[image:image-20220602102824-5.png||height="306" width="600"]]
324 +[[image:image-20220602171217-1.png||height="538" width="800"]]
248 248  
249 249  
327 +Open the serial port tool
250 250  
251 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
329 +[[image:image-20220602161617-8.png]]
252 252  
331 +[[image:image-20220602161718-9.png||height="457" width="800"]]
253 253  
254 -[[image:image-20220817085447-1.png]]
255 255  
256 256  
335 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
257 257  
337 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
258 258  
259 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
260 260  
340 +[[image:image-20220602161935-10.png||height="498" width="800"]]
261 261  
262 -(((
263 -(% style="color:blue" %)**1. Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
264 -)))
265 265  
266 266  
267 -[[image:image-20220602103227-6.png]]
344 +(% style="color:blue" %)**3. See Uplink Command**
268 268  
346 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
269 269  
270 -[[image:image-20220602103357-7.png]]
348 +example: AT+SENDB=01,02,8,05820802581ea0a5
271 271  
350 +[[image:image-20220602162157-11.png||height="497" width="800"]]
272 272  
273 273  
274 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
275 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
276 276  
354 +(% style="color:blue" %)**4. Check to see if TTN received the message**
277 277  
278 -[[image:image-20220602103844-8.png]]
356 +[[image:image-20220602162331-12.png||height="420" width="800"]]
279 279  
280 280  
281 281  
282 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
283 -(% style="color:blue" %)**3. Select the bin file to burn**
360 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
284 284  
285 285  
286 -[[image:image-20220602104144-9.png]]
363 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
287 287  
288 288  
289 -[[image:image-20220602104251-10.png]]
366 +(% style="color:red" %)**Preconditions:**
290 290  
368 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
291 291  
292 -[[image:image-20220602104402-11.png]]
370 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
293 293  
294 294  
295 295  
296 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
297 -(% style="color:blue" %)**4. Click to start the download**
374 +(% style="color:blue" %)**Steps for usage:**
298 298  
299 -[[image:image-20220602104923-13.png]]
376 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
300 300  
378 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
301 301  
380 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
302 302  
303 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
304 -(% style="color:blue" %)**5. Check update process**
305 305  
306 306  
307 -[[image:image-20220602104948-14.png]]
384 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
308 308  
309 309  
387 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
310 310  
311 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
312 -(% style="color:blue" %)**The following picture shows that the burning is successful**
313 313  
314 -[[image:image-20220602105251-15.png]]
390 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
315 315  
392 +[[image:image-20220602171233-2.png||height="538" width="800"]]
316 316  
317 317  
318 -= 2.  FAQ =
319 319  
396 +(% style="color:blue" %)**2. Install Minicom in RPi.**
320 320  
321 -== 2.1  How to Compile Source Code for LA66? ==
398 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
322 322  
400 + (% style="background-color:yellow" %)**apt update**
323 323  
324 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
402 + (% style="background-color:yellow" %)**apt install minicom**
325 325  
326 326  
405 +Use minicom to connect to the RPI's terminal
327 327  
328 -= 3.  Order Info =
407 +[[image:image-20220602153146-3.png||height="439" width="500"]]
329 329  
330 330  
331 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
332 332  
411 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
333 333  
413 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
414 +
415 +
416 +[[image:image-20220602154928-5.png||height="436" width="500"]]
417 +
418 +
419 +
420 +(% style="color:blue" %)**4. Send Uplink message**
421 +
422 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
423 +
424 +example: AT+SENDB=01,02,8,05820802581ea0a5
425 +
426 +
427 +[[image:image-20220602160339-6.png||height="517" width="600"]]
428 +
429 +
430 +
431 +Check to see if TTN received the message
432 +
433 +[[image:image-20220602160627-7.png||height="369" width="800"]]
434 +
435 +
436 +
437 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
438 +
439 +
440 +
441 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
442 +
443 +
444 +
445 +
446 += 4.  Order Info =
447 +
448 +
449 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
450 +
451 +
334 334  (% style="color:blue" %)**XXX**(%%): The default frequency band
335 335  
336 336  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -344,11 +344,7 @@
344 344  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
345 345  
346 346  
465 += 5.  Reference =
347 347  
467 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
348 348  
349 -= 4.  Reference =
350 -
351 -
352 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
353 -
354 -
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -784.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0