Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 151.2 >
edited by Xiaoling
on 2022/08/22 16:13
To version < 80.1 >
edited by Edwin Chen
on 2022/07/10 22:03
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,64 +1,28 @@
1 -
2 -
3 -**Table of Contents:**
4 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
5 5  {{toc/}}
3 +{{/box}}
6 6  
5 += LA66 LoRaWAN Module =
7 7  
7 +== What is LA66 LoRaWAN Module ==
8 8  
9 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
11 11  
12 -
13 -== 1.1  Overview ==
14 -
15 -
16 -(((
17 -[[image:image-20220715000826-2.png||height="145" width="220"]]
18 -)))
19 -
20 -(((
21 -
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 -)))
27 -
28 -(((
29 -(((
30 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 -)))
32 -)))
33 -
34 -(((
35 -(((
36 36  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 -)))
38 -)))
39 39  
40 -(((
41 -(((
42 42  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 -)))
44 -)))
45 45  
46 -(((
47 -(((
48 48  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
49 -)))
50 -)))
51 51  
52 52  
20 +== Features ==
53 53  
54 -== 1.2  Features ==
55 -
56 -
57 -* Arduino Shield base on LA66 LoRaWAN module
58 -* Support LoRaWAN v1.0.3 protocol
22 +* Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 -* SMA connector
25 +* SMD Antenna pad and i-pex antenna connector
62 62  * Available in different frequency LoRaWAN frequency bands.
63 63  * World-wide unique OTAA keys.
64 64  * AT Command via UART-TTL interface
... ... @@ -65,12 +65,8 @@
65 65  * Firmware upgradable via UART interface
66 66  * Ultra-long RF range
67 67  
32 +== Specification ==
68 68  
69 -
70 -
71 -== 1.3  Specification ==
72 -
73 -
74 74  * CPU: 32-bit 48 MHz
75 75  * Flash: 256KB
76 76  * RAM: 64KB
... ... @@ -89,266 +89,362 @@
89 89  * LoRa Rx current: <9 mA
90 90  * I/O Voltage: 3.3v
91 91  
52 +== AT Command ==
92 92  
54 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
93 93  
94 94  
95 -== 1.4  Pin Mapping & LED ==
57 +== Dimension ==
96 96  
59 +[[image:image-20220517072526-1.png]]
97 97  
98 -[[image:image-20220817085048-1.png||height="533" width="734"]]
99 99  
62 +== Pin Mapping ==
100 100  
64 +[[image:image-20220523101537-1.png]]
101 101  
102 -~1. The LED lights up red when there is an upstream data packet
103 -2. When the network is successfully connected, the green light will be on for 5 seconds
104 -3. Purple light on when receiving downlink data packets
66 +== Land Pattern ==
105 105  
68 +[[image:image-20220517072821-2.png]]
106 106  
107 -[[image:image-20220820112305-1.png||height="515" width="749"]]
108 108  
71 +== Order Info ==
109 109  
73 +Part Number: **LA66-XXX**
110 110  
111 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
75 +**XX**: The default frequency band
112 112  
77 +* **AS923**: LoRaWAN AS923 band
78 +* **AU915**: LoRaWAN AU915 band
79 +* **EU433**: LoRaWAN EU433 band
80 +* **EU868**: LoRaWAN EU868 band
81 +* **KR920**: LoRaWAN KR920 band
82 +* **US915**: LoRaWAN US915 band
83 +* **IN865**: LoRaWAN IN865 band
84 +* **CN470**: LoRaWAN CN470 band
85 +* **PP**: Peer to Peer LoRa Protocol
113 113  
114 -**Show connection diagram：**
87 += LA66 LoRaWAN Shield =
115 115  
89 +== Overview ==
116 116  
117 -[[image:image-20220723170210-2.png||height="908" width="681"]]
91 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
118 118  
119 119  
94 +== Features ==
120 120  
121 -(% style="color:blue" %)**1.  open Arduino IDE**
96 +* Arduino Shield base on LA66 LoRaWAN module
97 +* Support LoRaWAN v1.0.4 protocol
98 +* Support peer-to-peer protocol
99 +* TCXO crystal to ensure RF performance on low temperature
100 +* SMA connector
101 +* Available in different frequency LoRaWAN frequency bands.
102 +* World-wide unique OTAA keys.
103 +* AT Command via UART-TTL interface
104 +* Firmware upgradable via UART interface
105 +* Ultra-long RF range
122 122  
107 +== Specification ==
123 123  
124 -[[image:image-20220723170545-4.png]]
109 +* CPU: 32-bit 48 MHz
110 +* Flash: 256KB
111 +* RAM: 64KB
112 +* Input Power Range: 1.8v ~~ 3.7v
113 +* Power Consumption: < 4uA.
114 +* Frequency Range: 150 MHz ~~ 960 MHz
115 +* Maximum Power +22 dBm constant RF output
116 +* High sensitivity: -148 dBm
117 +* Temperature:
118 +** Storage: -55 ~~ +125℃
119 +** Operating: -40 ~~ +85℃
120 +* Humidity:
121 +** Storage: 5 ~~ 95% (Non-Condensing)
122 +** Operating: 10 ~~ 95% (Non-Condensing)
123 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
124 +* LoRa Rx current: <9 mA
125 +* I/O Voltage: 3.3v
125 125  
127 +== Pin Mapping & LED ==
126 126  
129 +== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
127 127  
128 -(% style="color:blue" %)**2.  Open project**
131 +== Example: Join TTN network and send an uplink message, get downlink message. ==
129 129  
133 +== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
130 130  
131 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
135 +== Upgrade Firmware of LA66 LoRaWAN Shield ==
132 132  
133 -[[image:image-20220726135239-1.png]]
137 +=== Items needed for update ===
134 134  
139 +1. LA66 LoRaWAN Shield
140 +1. Arduino
141 +1. USB TO TTL Adapter
135 135  
143 +[[image:image-20220602100052-2.png||height="385" width="600"]]
136 136  
137 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
138 138  
139 -[[image:image-20220726135356-2.png]]
146 +=== Connection ===
140 140  
148 +[[image:image-20220602101311-3.png||height="276" width="600"]]
141 141  
150 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
151 +**GND  <-> GND
152 +TXD  <-> TXD
153 +RXD  <-> RXD**
142 142  
143 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
155 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
144 144  
157 +Connect USB TTL Adapter to PC after connecting the wires
145 145  
146 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
147 147  
160 +[[image:image-20220602102240-4.png||height="304" width="600"]]
148 148  
149 149  
150 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
163 +=== Upgrade steps ===
151 151  
165 +==== Switch SW1 to put in ISP position ====
152 152  
153 -(% style="color:blue" %)**1.  Open project**
167 +[[image:image-20220602102824-5.png||height="306" width="600"]]
154 154  
155 155  
156 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
170 +==== Press the RST switch once ====
157 157  
172 +[[image:image-20220602104701-12.png||height="285" width="600"]]
158 158  
159 -[[image:image-20220723172502-8.png]]
160 160  
175 +==== Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
161 161  
177 +**~1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
162 162  
163 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
179 +[[image:image-20220602103227-6.png]]
164 164  
181 +[[image:image-20220602103357-7.png]]
165 165  
166 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
167 167  
184 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
185 +**2. Select the COM port corresponding to USB TTL**
168 168  
187 +[[image:image-20220602103844-8.png]]
169 169  
170 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
171 171  
190 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
191 +**3. Select the bin file to burn**
172 172  
173 -(% style="color:blue" %)**1.  Open project**
193 +[[image:image-20220602104144-9.png]]
174 174  
195 +[[image:image-20220602104251-10.png]]
175 175  
176 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
197 +[[image:image-20220602104402-11.png]]
177 177  
178 178  
179 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
200 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
201 +**4. Click to start the download**
180 180  
203 +[[image:image-20220602104923-13.png]]
181 181  
182 182  
183 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
206 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
207 +**5. Check update process**
184 184  
209 +[[image:image-20220602104948-14.png]]
185 185  
186 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
187 187  
212 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
213 +**The following picture shows that the burning is successful**
188 188  
215 +[[image:image-20220602105251-15.png]]
189 189  
190 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
191 191  
192 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
218 +== Order Info ==
193 193  
194 -[[image:image-20220723175700-12.png||height="602" width="995"]]
220 +Part Number: **LA66-LoRaWAN-Shield-XXX**
195 195  
222 +**XX**: The default frequency band
196 196  
224 +* **AS923**: LoRaWAN AS923 band
225 +* **AU915**: LoRaWAN AU915 band
226 +* **EU433**: LoRaWAN EU433 band
227 +* **EU868**: LoRaWAN EU868 band
228 +* **KR920**: LoRaWAN KR920 band
229 +* **US915**: LoRaWAN US915 band
230 +* **IN865**: LoRaWAN IN865 band
231 +* **CN470**: LoRaWAN CN470 band
232 +* **PP**: Peer to Peer LoRa Protocol
197 197  
198 -== 1.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
234 +== Package Info ==
199 199  
236 +* LA66 LoRaWAN Shield x 1
237 +* RF Antenna x 1
200 200  
201 -=== 1.8.1  Items needed for update ===
239 += LA66 USB LoRaWAN Adapter =
202 202  
241 +== Overview ==
203 203  
204 -1. LA66 LoRaWAN Shield
205 -1. Arduino
206 -1. USB TO TTL Adapter
243 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
207 207  
208 208  
246 +== Features ==
209 209  
210 -[[image:image-20220602100052-2.png||height="385" width="600"]]
248 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
249 +* Ultra-long RF range
250 +* Support LoRaWAN v1.0.4 protocol
251 +* Support peer-to-peer protocol
252 +* TCXO crystal to ensure RF performance on low temperature
253 +* Spring RF antenna
254 +* Available in different frequency LoRaWAN frequency bands.
255 +* World-wide unique OTAA keys.
256 +* AT Command via UART-TTL interface
257 +* Firmware upgradable via UART interface
211 211  
259 +== Specification ==
212 212  
261 +* CPU: 32-bit 48 MHz
262 +* Flash: 256KB
263 +* RAM: 64KB
264 +* Input Power Range: 5v
265 +* Frequency Range: 150 MHz ~~ 960 MHz
266 +* Maximum Power +22 dBm constant RF output
267 +* High sensitivity: -148 dBm
268 +* Temperature:
269 +** Storage: -55 ~~ +125℃
270 +** Operating: -40 ~~ +85℃
271 +* Humidity:
272 +** Storage: 5 ~~ 95% (Non-Condensing)
273 +** Operating: 10 ~~ 95% (Non-Condensing)
274 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
275 +* LoRa Rx current: <9 mA
213 213  
214 -=== 1.8.2  Connection ===
277 +== Pin Mapping & LED ==
215 215  
279 +== Example Send & Get Messages via LoRaWAN in PC ==
216 216  
217 -[[image:image-20220602101311-3.png||height="276" width="600"]]
281 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
218 218  
283 +~1. Connect the LA66 USB LoRaWAN adapter to PC
219 219  
220 -(((
221 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
222 -)))
285 +[[image:image-20220602171217-1.png||height="538" width="800"]]
223 223  
224 -(((
225 -(% style="background-color:yellow" %)**GND  <-> GND
226 -TXD  <->  TXD
227 -RXD  <->  RXD**
228 -)))
287 +Open the serial port tool
229 229  
289 +[[image:image-20220602161617-8.png]]
230 230  
231 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
291 +[[image:image-20220602161718-9.png||height="457" width="800"]]
232 232  
233 -Connect USB TTL Adapter to PC after connecting the wires
234 234  
294 +2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.
235 235  
236 -[[image:image-20220602102240-4.png||height="304" width="600"]]
296 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
237 237  
298 +[[image:image-20220602161935-10.png||height="498" width="800"]]
238 238  
239 239  
240 -=== 1.8.3  Upgrade steps ===
301 +3. See Uplink Command
241 241  
303 +Command format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
242 242  
305 +example: AT+SENDB=01,02,8,05820802581ea0a5
243 243  
244 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
307 +[[image:image-20220602162157-11.png||height="497" width="800"]]
245 245  
246 246  
247 -[[image:image-20220602102824-5.png||height="306" width="600"]]
310 +4. Check to see if TTN received the message
248 248  
312 +[[image:image-20220602162331-12.png||height="420" width="800"]]
249 249  
250 250  
251 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
252 252  
316 +== Example Send & Get Messages via LoRaWAN in RPi ==
253 253  
254 -[[image:image-20220817085447-1.png]]
318 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
255 255  
320 +~1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi
256 256  
322 +[[image:image-20220602171233-2.png||height="538" width="800"]]
257 257  
258 258  
259 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
325 +2. Install Minicom in RPi.
260 260  
327 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
261 261  
262 -(((
263 -(% style="color:blue" %)**1. Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
264 -)))
329 +(% class="mark" %)apt update
265 265  
331 +(% class="mark" %)apt install minicom
266 266  
267 -[[image:image-20220602103227-6.png]]
268 268  
334 +Use minicom to connect to the RPI's terminal
269 269  
270 -[[image:image-20220602103357-7.png]]
336 +[[image:image-20220602153146-3.png||height="439" width="500"]]
271 271  
272 272  
339 +3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.
340 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
273 273  
274 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
275 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
342 +[[image:image-20220602154928-5.png||height="436" width="500"]]
276 276  
277 277  
278 -[[image:image-20220602103844-8.png]]
345 +4. Send Uplink message
279 279  
347 +Format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
280 280  
349 +example: AT+SENDB=01,02,8,05820802581ea0a5
281 281  
282 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
283 -(% style="color:blue" %)**3. Select the bin file to burn**
351 +[[image:image-20220602160339-6.png||height="517" width="600"]]
284 284  
353 +Check to see if TTN received the message
285 285  
286 -[[image:image-20220602104144-9.png]]
355 +[[image:image-20220602160627-7.png||height="369" width="800"]]
287 287  
288 288  
289 -[[image:image-20220602104251-10.png]]
290 290  
359 += Example: Send PC's CPU/RAM usage to TTN via python =
291 291  
292 -[[image:image-20220602104402-11.png]]
361 +==== Take python as an example： ====
293 293  
363 +===== Preconditions: =====
294 294  
365 +1.LA66 USB LoRaWAN Adapter works fine
295 295  
296 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
297 -(% style="color:blue" %)**4. Click to start the download**
367 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
298 298  
299 -[[image:image-20220602104923-13.png]]
369 +===== Steps for usage =====
300 300  
371 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
301 301  
373 +2.Run the script in PC and see the TTN
302 302  
303 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
304 -(% style="color:blue" %)**5. Check update process**
375 +[[image:image-20220602115852-3.png]]
305 305  
306 306  
307 -[[image:image-20220602104948-14.png]]
308 308  
379 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
309 309  
310 310  
311 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
312 -(% style="color:blue" %)**The following picture shows that the burning is successful**
382 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
313 313  
314 -[[image:image-20220602105251-15.png]]
315 315  
316 316  
386 +== Order Info ==
317 317  
318 -= 2.  FAQ =
388 +Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
319 319  
390 +**XX**: The default frequency band
320 320  
321 -== 2.1  How to Compile Source Code for LA66? ==
392 +* **AS923**: LoRaWAN AS923 band
393 +* **AU915**: LoRaWAN AU915 band
394 +* **EU433**: LoRaWAN EU433 band
395 +* **EU868**: LoRaWAN EU868 band
396 +* **KR920**: LoRaWAN KR920 band
397 +* **US915**: LoRaWAN US915 band
398 +* **IN865**: LoRaWAN IN865 band
399 +* **CN470**: LoRaWAN CN470 band
400 +* **PP**: Peer to Peer LoRa Protocol
322 322  
402 +== Package Info ==
323 323  
324 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
404 +* LA66 USB LoRaWAN Adapter x 1
325 325  
406 += Reference =
326 326  
408 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
327 327  
328 -= 3.  Order Info =
329 -
330 -
331 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
332 -
333 -
334 -(% style="color:blue" %)**XXX**(%%): The default frequency band
335 -
336 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
337 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
338 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
339 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
340 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
341 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
342 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
343 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
344 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
345 -
346 -
347 -
348 -
349 -= 4.  Reference =
350 -
351 -
352 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
353 -
354 354  
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -784.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0