Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 151.1 >
edited by Edwin Chen
on 2022/08/20 11:23
To version < 87.16 >
edited by Xiaoling
on 2022/07/13 10:10
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -6,56 +6,105 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 11  
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
15 -
16 16  (((
17 -[[image:image-20220715000826-2.png||height="145" width="220"]]
16 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
18 18  )))
19 19  
20 20  (((
21 -
20 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
22 22  )))
23 23  
24 24  (((
25 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 -)))
27 -
28 -(((
29 -(((
30 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 -)))
32 -)))
33 -
34 -(((
35 -(((
36 36  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 37  )))
38 -)))
39 39  
40 40  (((
41 -(((
42 42  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 43  )))
44 -)))
45 45  
46 46  (((
47 -(((
48 48  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
49 49  )))
50 -)))
51 51  
52 52  
53 -
54 54  == 1.2  Features ==
55 55  
38 +* Support LoRaWAN v1.0.4 protocol
39 +* Support peer-to-peer protocol
40 +* TCXO crystal to ensure RF performance on low temperature
41 +* SMD Antenna pad and i-pex antenna connector
42 +* Available in different frequency LoRaWAN frequency bands.
43 +* World-wide unique OTAA keys.
44 +* AT Command via UART-TTL interface
45 +* Firmware upgradable via UART interface
46 +* Ultra-long RF range
56 56  
48 +
49 +
50 +== 1.3  Specification ==
51 +
52 +* CPU: 32-bit 48 MHz
53 +* Flash: 256KB
54 +* RAM: 64KB
55 +* Input Power Range: 1.8v ~~ 3.7v
56 +* Power Consumption: < 4uA.
57 +* Frequency Range: 150 MHz ~~ 960 MHz
58 +* Maximum Power +22 dBm constant RF output
59 +* High sensitivity: -148 dBm
60 +* Temperature:
61 +** Storage: -55 ~~ +125℃
62 +** Operating: -40 ~~ +85℃
63 +* Humidity:
64 +** Storage: 5 ~~ 95% (Non-Condensing)
65 +** Operating: 10 ~~ 95% (Non-Condensing)
66 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
67 +* LoRa Rx current: <9 mA
68 +* I/O Voltage: 3.3v
69 +
70 +
71 +
72 +== 1.4  AT Command ==
73 +
74 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
75 +
76 +
77 +== 1.5  Dimension ==
78 +
79 +[[image:image-20220517072526-1.png]]
80 +
81 +
82 +
83 +== 1.6  Pin Mapping ==
84 +
85 +
86 +[[image:image-20220523101537-1.png]]
87 +
88 +
89 +
90 +== 1.7  Land Pattern ==
91 +
92 +[[image:image-20220517072821-2.png]]
93 +
94 +
95 +
96 += 2.  LA66 LoRaWAN Shield =
97 +
98 +
99 +== 2.1  Overview ==
100 +
101 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
102 +
103 +
104 +== 2.2  Features ==
105 +
57 57  * Arduino Shield base on LA66 LoRaWAN module
58 -* Support LoRaWAN v1.0.3 protocol
107 +* Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 61  * SMA connector
... ... @@ -66,8 +66,8 @@
66 66  * Ultra-long RF range
67 67  
68 68  
69 -== 1.3  Specification ==
70 70  
119 +== 2.3  Specification ==
71 71  
72 72  * CPU: 32-bit 48 MHz
73 73  * Flash: 256KB
... ... @@ -88,243 +88,319 @@
88 88  * I/O Voltage: 3.3v
89 89  
90 90  
91 -== 1.4  Pin Mapping & LED ==
92 92  
141 +== 2.4  Pin Mapping & LED ==
93 93  
94 -[[image:image-20220817085048-1.png||height="533" width="734"]]
95 95  
96 96  
145 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
97 97  
98 -~1. The LED lights up red when there is an upstream data packet
99 -2. When the network is successfully connected, the green light will be on for 5 seconds
100 -3. Purple light on when receiving downlink data packets
101 101  
102 102  
103 -[[image:image-20220820112305-1.png||height="515" width="749"]]
149 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
104 104  
105 105  
106 106  
107 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
153 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
108 108  
109 109  
110 -**Show connection diagram：**
111 111  
157 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
112 112  
113 -[[image:image-20220723170210-2.png||height="908" width="681"]]
114 114  
160 +=== 2.8.1  Items needed for update ===
115 115  
162 +1. LA66 LoRaWAN Shield
163 +1. Arduino
164 +1. USB TO TTL Adapter
116 116  
117 -(% style="color:blue" %)**1.  open Arduino IDE**
118 118  
119 119  
120 -[[image:image-20220723170545-4.png]]
121 121  
169 +[[image:image-20220602100052-2.png||height="385" width="600"]]
122 122  
123 123  
124 -(% style="color:blue" %)**2.  Open project**
172 +=== 2.8.2  Connection ===
125 125  
126 126  
127 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
175 +[[image:image-20220602101311-3.png||height="276" width="600"]]
128 128  
129 -[[image:image-20220726135239-1.png]]
130 130  
178 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
131 131  
180 +(((
181 +(% style="background-color:yellow" %)**GND  <-> GND
182 +TXD  <->  TXD
183 +RXD  <->  RXD**
184 +)))
132 132  
133 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
134 134  
135 -[[image:image-20220726135356-2.png]]
187 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
136 136  
189 +Connect USB TTL Adapter to PC after connecting the wires
137 137  
138 138  
139 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
192 +[[image:image-20220602102240-4.png||height="304" width="600"]]
140 140  
141 141  
142 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
195 +=== 2.8.3  Upgrade steps ===
143 143  
144 144  
198 +==== 1.  Switch SW1 to put in ISP position ====
145 145  
146 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
147 147  
201 +[[image:image-20220602102824-5.png||height="306" width="600"]]
148 148  
149 -(% style="color:blue" %)**1.  Open project**
150 150  
151 151  
152 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
205 +==== 2.  Press the RST switch once ====
153 153  
154 154  
155 -[[image:image-20220723172502-8.png]]
208 +[[image:image-20220602104701-12.png||height="285" width="600"]]
156 156  
157 157  
158 158  
159 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
212 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
160 160  
161 161  
162 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
215 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
163 163  
164 164  
218 +[[image:image-20220602103227-6.png]]
165 165  
166 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
167 167  
221 +[[image:image-20220602103357-7.png]]
168 168  
169 -(% style="color:blue" %)**1.  Open project**
170 170  
171 171  
172 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
225 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
226 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
173 173  
174 174  
175 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
229 +[[image:image-20220602103844-8.png]]
176 176  
177 177  
178 178  
179 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
233 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
234 +(% style="color:blue" %)**3. Select the bin file to burn**
180 180  
181 181  
182 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
237 +[[image:image-20220602104144-9.png]]
183 183  
184 184  
240 +[[image:image-20220602104251-10.png]]
185 185  
186 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
187 187  
188 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
243 +[[image:image-20220602104402-11.png]]
189 189  
190 -[[image:image-20220723175700-12.png||height="602" width="995"]]
191 191  
192 192  
247 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
248 +(% style="color:blue" %)**4. Click to start the download**
193 193  
194 -== 1.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
250 +[[image:image-20220602104923-13.png]]
195 195  
196 196  
197 -=== 1.8.1  Items needed for update ===
198 198  
254 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
255 +(% style="color:blue" %)**5. Check update process**
199 199  
200 -1. LA66 LoRaWAN Shield
201 -1. Arduino
202 -1. USB TO TTL Adapter
203 203  
204 -[[image:image-20220602100052-2.png||height="385" width="600"]]
258 +[[image:image-20220602104948-14.png]]
205 205  
206 206  
207 207  
208 -=== 1.8.2  Connection ===
262 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
263 +(% style="color:blue" %)**The following picture shows that the burning is successful**
209 209  
265 +[[image:image-20220602105251-15.png]]
210 210  
211 -[[image:image-20220602101311-3.png||height="276" width="600"]]
212 212  
213 213  
214 -(((
215 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
216 -)))
269 += 3.  LA66 USB LoRaWAN Adapter =
217 217  
218 -(((
219 -(% style="background-color:yellow" %)**GND  <-> GND
220 -TXD  <->  TXD
221 -RXD  <->  RXD**
222 -)))
223 223  
272 +== 3.1  Overview ==
224 224  
225 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
274 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
226 226  
227 -Connect USB TTL Adapter to PC after connecting the wires
228 228  
277 +== 3.2  Features ==
229 229  
230 -[[image:image-20220602102240-4.png||height="304" width="600"]]
279 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
280 +* Ultra-long RF range
281 +* Support LoRaWAN v1.0.4 protocol
282 +* Support peer-to-peer protocol
283 +* TCXO crystal to ensure RF performance on low temperature
284 +* Spring RF antenna
285 +* Available in different frequency LoRaWAN frequency bands.
286 +* World-wide unique OTAA keys.
287 +* AT Command via UART-TTL interface
288 +* Firmware upgradable via UART interface
231 231  
232 232  
233 233  
234 -=== 1.8.3  Upgrade steps ===
292 +== 3.3  Specification ==
235 235  
294 +* CPU: 32-bit 48 MHz
295 +* Flash: 256KB
296 +* RAM: 64KB
297 +* Input Power Range: 5v
298 +* Frequency Range: 150 MHz ~~ 960 MHz
299 +* Maximum Power +22 dBm constant RF output
300 +* High sensitivity: -148 dBm
301 +* Temperature:
302 +** Storage: -55 ~~ +125℃
303 +** Operating: -40 ~~ +85℃
304 +* Humidity:
305 +** Storage: 5 ~~ 95% (Non-Condensing)
306 +** Operating: 10 ~~ 95% (Non-Condensing)
307 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
308 +* LoRa Rx current: <9 mA
236 236  
237 237  
238 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
239 239  
312 +== 3.4  Pin Mapping & LED ==
240 240  
241 -[[image:image-20220602102824-5.png||height="306" width="600"]]
242 242  
243 243  
316 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
244 244  
245 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
246 246  
319 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
247 247  
248 -[[image:image-20220817085447-1.png]]
249 249  
322 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
250 250  
251 251  
325 +[[image:image-20220602171217-1.png||height="538" width="800"]]
252 252  
253 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
254 254  
328 +Open the serial port tool
255 255  
256 -(((
257 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
258 -)))
330 +[[image:image-20220602161617-8.png]]
259 259  
332 +[[image:image-20220602161718-9.png||height="457" width="800"]]
260 260  
261 -[[image:image-20220602103227-6.png]]
262 262  
263 263  
264 -[[image:image-20220602103357-7.png]]
336 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
265 265  
338 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
266 266  
267 267  
268 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
269 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
341 +[[image:image-20220602161935-10.png||height="498" width="800"]]
270 270  
271 271  
272 -[[image:image-20220602103844-8.png]]
273 273  
345 +(% style="color:blue" %)**3. See Uplink Command**
274 274  
347 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
275 275  
276 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
277 -(% style="color:blue" %)**3. Select the bin file to burn**
349 +example: AT+SENDB=01,02,8,05820802581ea0a5
278 278  
351 +[[image:image-20220602162157-11.png||height="497" width="800"]]
279 279  
280 -[[image:image-20220602104144-9.png]]
281 281  
282 282  
283 -[[image:image-20220602104251-10.png]]
355 +(% style="color:blue" %)**4. Check to see if TTN received the message**
284 284  
357 +[[image:image-20220602162331-12.png||height="420" width="800"]]
285 285  
286 -[[image:image-20220602104402-11.png]]
287 287  
288 288  
361 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
289 289  
290 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
291 -(% style="color:blue" %)**4. Click to start the download**
292 292  
293 -[[image:image-20220602104923-13.png]]
364 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
294 294  
295 295  
367 +(% style="color:red" %)**Preconditions:**
296 296  
297 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
298 -(% style="color:blue" %)**5. Check update process**
369 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
299 299  
371 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
300 300  
301 -[[image:image-20220602104948-14.png]]
302 302  
303 303  
375 +(% style="color:blue" %)**Steps for usage:**
304 304  
305 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
306 -(% style="color:blue" %)**The following picture shows that the burning is successful**
377 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
307 307  
308 -[[image:image-20220602105251-15.png]]
379 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
309 309  
381 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
310 310  
311 311  
312 -= 2.  FAQ =
313 313  
385 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
314 314  
315 -== 2.1  How to Compile Source Code for LA66? ==
316 316  
388 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
317 317  
318 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
319 319  
391 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
320 320  
393 +[[image:image-20220602171233-2.png||height="538" width="800"]]
321 321  
322 -= 3.  Order Info =
323 323  
324 324  
325 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
397 +(% style="color:blue" %)**2. Install Minicom in RPi.**
326 326  
399 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
327 327  
401 + (% style="background-color:yellow" %)**apt update**
402 +
403 + (% style="background-color:yellow" %)**apt install minicom**
404 +
405 +
406 +Use minicom to connect to the RPI's terminal
407 +
408 +[[image:image-20220602153146-3.png||height="439" width="500"]]
409 +
410 +
411 +
412 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
413 +
414 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
415 +
416 +
417 +[[image:image-20220602154928-5.png||height="436" width="500"]]
418 +
419 +
420 +
421 +(% style="color:blue" %)**4. Send Uplink message**
422 +
423 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
424 +
425 +example: AT+SENDB=01,02,8,05820802581ea0a5
426 +
427 +
428 +[[image:image-20220602160339-6.png||height="517" width="600"]]
429 +
430 +
431 +
432 +Check to see if TTN received the message
433 +
434 +[[image:image-20220602160627-7.png||height="369" width="800"]]
435 +
436 +
437 +
438 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
439 +
440 +
441 +
442 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
443 +
444 +
445 +
446 +
447 += 4.  Order Info =
448 +
449 +
450 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
451 +
452 +
328 328  (% style="color:blue" %)**XXX**(%%): The default frequency band
329 329  
330 330  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -339,9 +339,8 @@
339 339  
340 340  
341 341  
342 -= 4.  Reference =
467 += 5.  Reference =
343 343  
469 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
344 344  
345 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
346 -
347 347  
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -784.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0