Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 151.1 >
edited by Edwin Chen
on 2022/08/20 11:23
To version < 80.1 >
edited by Edwin Chen
on 2022/07/10 22:03
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -1,64 +1,28 @@
1 -
2 -
3 -**Table of Contents:**
4 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
5 5  {{toc/}}
3 +{{/box}}
6 6  
5 += LA66 LoRaWAN Module =
7 7  
7 +== What is LA66 LoRaWAN Module ==
8 8  
9 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
11 11  
12 -
13 -== 1.1  Overview ==
14 -
15 -
16 -(((
17 -[[image:image-20220715000826-2.png||height="145" width="220"]]
18 -)))
19 -
20 -(((
21 -
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 -)))
27 -
28 -(((
29 -(((
30 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 -)))
32 -)))
33 -
34 -(((
35 -(((
36 36  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 -)))
38 -)))
39 39  
40 -(((
41 -(((
42 42  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 -)))
44 -)))
45 45  
46 -(((
47 -(((
48 48  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
49 -)))
50 -)))
51 51  
52 52  
20 +== Features ==
53 53  
54 -== 1.2  Features ==
55 -
56 -
57 -* Arduino Shield base on LA66 LoRaWAN module
58 -* Support LoRaWAN v1.0.3 protocol
22 +* Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 -* SMA connector
25 +* SMD Antenna pad and i-pex antenna connector
62 62  * Available in different frequency LoRaWAN frequency bands.
63 63  * World-wide unique OTAA keys.
64 64  * AT Command via UART-TTL interface
... ... @@ -65,10 +65,8 @@
65 65  * Firmware upgradable via UART interface
66 66  * Ultra-long RF range
67 67  
32 +== Specification ==
68 68  
69 -== 1.3  Specification ==
70 -
71 -
72 72  * CPU: 32-bit 48 MHz
73 73  * Flash: 256KB
74 74  * RAM: 64KB
... ... @@ -87,261 +87,362 @@
87 87  * LoRa Rx current: <9 mA
88 88  * I/O Voltage: 3.3v
89 89  
52 +== AT Command ==
90 90  
91 -== 1.4  Pin Mapping & LED ==
54 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
92 92  
93 93  
94 -[[image:image-20220817085048-1.png||height="533" width="734"]]
57 +== Dimension ==
95 95  
59 +[[image:image-20220517072526-1.png]]
96 96  
97 97  
98 -~1. The LED lights up red when there is an upstream data packet
99 -2. When the network is successfully connected, the green light will be on for 5 seconds
100 -3. Purple light on when receiving downlink data packets
62 +== Pin Mapping ==
101 101  
64 +[[image:image-20220523101537-1.png]]
102 102  
103 -[[image:image-20220820112305-1.png||height="515" width="749"]]
66 +== Land Pattern ==
104 104  
68 +[[image:image-20220517072821-2.png]]
105 105  
106 106  
107 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
71 +== Order Info ==
108 108  
73 +Part Number: **LA66-XXX**
109 109  
110 -**Show connection diagram：**
75 +**XX**: The default frequency band
111 111  
77 +* **AS923**: LoRaWAN AS923 band
78 +* **AU915**: LoRaWAN AU915 band
79 +* **EU433**: LoRaWAN EU433 band
80 +* **EU868**: LoRaWAN EU868 band
81 +* **KR920**: LoRaWAN KR920 band
82 +* **US915**: LoRaWAN US915 band
83 +* **IN865**: LoRaWAN IN865 band
84 +* **CN470**: LoRaWAN CN470 band
85 +* **PP**: Peer to Peer LoRa Protocol
112 112  
113 -[[image:image-20220723170210-2.png||height="908" width="681"]]
87 += LA66 LoRaWAN Shield =
114 114  
89 +== Overview ==
115 115  
91 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
116 116  
117 -(% style="color:blue" %)**1.  open Arduino IDE**
118 118  
94 +== Features ==
119 119  
120 -[[image:image-20220723170545-4.png]]
96 +* Arduino Shield base on LA66 LoRaWAN module
97 +* Support LoRaWAN v1.0.4 protocol
98 +* Support peer-to-peer protocol
99 +* TCXO crystal to ensure RF performance on low temperature
100 +* SMA connector
101 +* Available in different frequency LoRaWAN frequency bands.
102 +* World-wide unique OTAA keys.
103 +* AT Command via UART-TTL interface
104 +* Firmware upgradable via UART interface
105 +* Ultra-long RF range
121 121  
107 +== Specification ==
122 122  
109 +* CPU: 32-bit 48 MHz
110 +* Flash: 256KB
111 +* RAM: 64KB
112 +* Input Power Range: 1.8v ~~ 3.7v
113 +* Power Consumption: < 4uA.
114 +* Frequency Range: 150 MHz ~~ 960 MHz
115 +* Maximum Power +22 dBm constant RF output
116 +* High sensitivity: -148 dBm
117 +* Temperature:
118 +** Storage: -55 ~~ +125℃
119 +** Operating: -40 ~~ +85℃
120 +* Humidity:
121 +** Storage: 5 ~~ 95% (Non-Condensing)
122 +** Operating: 10 ~~ 95% (Non-Condensing)
123 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
124 +* LoRa Rx current: <9 mA
125 +* I/O Voltage: 3.3v
123 123  
124 -(% style="color:blue" %)**2.  Open project**
127 +== Pin Mapping & LED ==
125 125  
129 +== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
126 126  
127 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
131 +== Example: Join TTN network and send an uplink message, get downlink message. ==
128 128  
129 -[[image:image-20220726135239-1.png]]
133 +== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
130 130  
135 +== Upgrade Firmware of LA66 LoRaWAN Shield ==
131 131  
137 +=== Items needed for update ===
132 132  
133 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
139 +1. LA66 LoRaWAN Shield
140 +1. Arduino
141 +1. USB TO TTL Adapter
134 134  
135 -[[image:image-20220726135356-2.png]]
143 +[[image:image-20220602100052-2.png||height="385" width="600"]]
136 136  
137 137  
146 +=== Connection ===
138 138  
139 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
148 +[[image:image-20220602101311-3.png||height="276" width="600"]]
140 140  
150 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
151 +**GND  <-> GND
152 +TXD  <-> TXD
153 +RXD  <-> RXD**
141 141  
142 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
155 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
143 143  
157 +Connect USB TTL Adapter to PC after connecting the wires
144 144  
145 145  
146 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
160 +[[image:image-20220602102240-4.png||height="304" width="600"]]
147 147  
148 148  
149 -(% style="color:blue" %)**1.  Open project**
163 +=== Upgrade steps ===
150 150  
165 +==== Switch SW1 to put in ISP position ====
151 151  
152 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
167 +[[image:image-20220602102824-5.png||height="306" width="600"]]
153 153  
154 154  
155 -[[image:image-20220723172502-8.png]]
170 +==== Press the RST switch once ====
156 156  
172 +[[image:image-20220602104701-12.png||height="285" width="600"]]
157 157  
158 158  
159 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
175 +==== Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
160 160  
177 +**~1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
161 161  
162 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
179 +[[image:image-20220602103227-6.png]]
163 163  
181 +[[image:image-20220602103357-7.png]]
164 164  
165 165  
166 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
184 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
185 +**2. Select the COM port corresponding to USB TTL**
167 167  
187 +[[image:image-20220602103844-8.png]]
168 168  
169 -(% style="color:blue" %)**1.  Open project**
170 170  
190 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
191 +**3. Select the bin file to burn**
171 171  
172 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
193 +[[image:image-20220602104144-9.png]]
173 173  
195 +[[image:image-20220602104251-10.png]]
174 174  
175 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
197 +[[image:image-20220602104402-11.png]]
176 176  
177 177  
200 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
201 +**4. Click to start the download**
178 178  
179 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
203 +[[image:image-20220602104923-13.png]]
180 180  
181 181  
182 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
206 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
207 +**5. Check update process**
183 183  
209 +[[image:image-20220602104948-14.png]]
184 184  
185 185  
186 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
212 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
213 +**The following picture shows that the burning is successful**
187 187  
188 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
215 +[[image:image-20220602105251-15.png]]
189 189  
190 -[[image:image-20220723175700-12.png||height="602" width="995"]]
191 191  
218 +== Order Info ==
192 192  
220 +Part Number: **LA66-LoRaWAN-Shield-XXX**
193 193  
194 -== 1.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
222 +**XX**: The default frequency band
195 195  
224 +* **AS923**: LoRaWAN AS923 band
225 +* **AU915**: LoRaWAN AU915 band
226 +* **EU433**: LoRaWAN EU433 band
227 +* **EU868**: LoRaWAN EU868 band
228 +* **KR920**: LoRaWAN KR920 band
229 +* **US915**: LoRaWAN US915 band
230 +* **IN865**: LoRaWAN IN865 band
231 +* **CN470**: LoRaWAN CN470 band
232 +* **PP**: Peer to Peer LoRa Protocol
196 196  
197 -=== 1.8.1  Items needed for update ===
234 +== Package Info ==
198 198  
236 +* LA66 LoRaWAN Shield x 1
237 +* RF Antenna x 1
199 199  
200 -1. LA66 LoRaWAN Shield
201 -1. Arduino
202 -1. USB TO TTL Adapter
239 += LA66 USB LoRaWAN Adapter =
203 203  
204 -[[image:image-20220602100052-2.png||height="385" width="600"]]
241 +== Overview ==
205 205  
243 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
206 206  
207 207  
208 -=== 1.8.2  Connection ===
246 +== Features ==
209 209  
248 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
249 +* Ultra-long RF range
250 +* Support LoRaWAN v1.0.4 protocol
251 +* Support peer-to-peer protocol
252 +* TCXO crystal to ensure RF performance on low temperature
253 +* Spring RF antenna
254 +* Available in different frequency LoRaWAN frequency bands.
255 +* World-wide unique OTAA keys.
256 +* AT Command via UART-TTL interface
257 +* Firmware upgradable via UART interface
210 210  
211 -[[image:image-20220602101311-3.png||height="276" width="600"]]
259 +== Specification ==
212 212  
261 +* CPU: 32-bit 48 MHz
262 +* Flash: 256KB
263 +* RAM: 64KB
264 +* Input Power Range: 5v
265 +* Frequency Range: 150 MHz ~~ 960 MHz
266 +* Maximum Power +22 dBm constant RF output
267 +* High sensitivity: -148 dBm
268 +* Temperature:
269 +** Storage: -55 ~~ +125℃
270 +** Operating: -40 ~~ +85℃
271 +* Humidity:
272 +** Storage: 5 ~~ 95% (Non-Condensing)
273 +** Operating: 10 ~~ 95% (Non-Condensing)
274 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
275 +* LoRa Rx current: <9 mA
213 213  
214 -(((
215 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
216 -)))
277 +== Pin Mapping & LED ==
217 217  
218 -(((
219 -(% style="background-color:yellow" %)**GND  <-> GND
220 -TXD  <->  TXD
221 -RXD  <->  RXD**
222 -)))
279 +== Example Send & Get Messages via LoRaWAN in PC ==
223 223  
281 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
224 224  
225 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
283 +~1. Connect the LA66 USB LoRaWAN adapter to PC
226 226  
227 -Connect USB TTL Adapter to PC after connecting the wires
285 +[[image:image-20220602171217-1.png||height="538" width="800"]]
228 228  
287 +Open the serial port tool
229 229  
230 -[[image:image-20220602102240-4.png||height="304" width="600"]]
289 +[[image:image-20220602161617-8.png]]
231 231  
291 +[[image:image-20220602161718-9.png||height="457" width="800"]]
232 232  
233 233  
234 -=== 1.8.3  Upgrade steps ===
294 +2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.
235 235  
296 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
236 236  
298 +[[image:image-20220602161935-10.png||height="498" width="800"]]
237 237  
238 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
239 239  
301 +3. See Uplink Command
240 240  
241 -[[image:image-20220602102824-5.png||height="306" width="600"]]
303 +Command format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
242 242  
305 +example: AT+SENDB=01,02,8,05820802581ea0a5
243 243  
307 +[[image:image-20220602162157-11.png||height="497" width="800"]]
244 244  
245 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
246 246  
310 +4. Check to see if TTN received the message
247 247  
248 -[[image:image-20220817085447-1.png]]
312 +[[image:image-20220602162331-12.png||height="420" width="800"]]
249 249  
250 250  
251 251  
316 +== Example Send & Get Messages via LoRaWAN in RPi ==
252 252  
253 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
318 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
254 254  
320 +~1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi
255 255  
256 -(((
257 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
258 -)))
322 +[[image:image-20220602171233-2.png||height="538" width="800"]]
259 259  
260 260  
261 -[[image:image-20220602103227-6.png]]
325 +2. Install Minicom in RPi.
262 262  
327 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
263 263  
264 -[[image:image-20220602103357-7.png]]
329 +(% class="mark" %)apt update
265 265  
331 +(% class="mark" %)apt install minicom
266 266  
267 267  
268 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
269 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
334 +Use minicom to connect to the RPI's terminal
270 270  
336 +[[image:image-20220602153146-3.png||height="439" width="500"]]
271 271  
272 -[[image:image-20220602103844-8.png]]
273 273  
339 +3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.
340 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
274 274  
342 +[[image:image-20220602154928-5.png||height="436" width="500"]]
275 275  
276 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
277 -(% style="color:blue" %)**3. Select the bin file to burn**
278 278  
345 +4. Send Uplink message
279 279  
280 -[[image:image-20220602104144-9.png]]
347 +Format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
281 281  
349 +example: AT+SENDB=01,02,8,05820802581ea0a5
282 282  
283 -[[image:image-20220602104251-10.png]]
351 +[[image:image-20220602160339-6.png||height="517" width="600"]]
284 284  
353 +Check to see if TTN received the message
285 285  
286 -[[image:image-20220602104402-11.png]]
355 +[[image:image-20220602160627-7.png||height="369" width="800"]]
287 287  
288 288  
289 289  
290 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
291 -(% style="color:blue" %)**4. Click to start the download**
359 += Example: Send PC's CPU/RAM usage to TTN via python =
292 292  
293 -[[image:image-20220602104923-13.png]]
361 +==== Take python as an example： ====
294 294  
363 +===== Preconditions: =====
295 295  
365 +1.LA66 USB LoRaWAN Adapter works fine
296 296  
297 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
298 -(% style="color:blue" %)**5. Check update process**
367 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
299 299  
369 +===== Steps for usage =====
300 300  
301 -[[image:image-20220602104948-14.png]]
371 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
302 302  
373 +2.Run the script in PC and see the TTN
303 303  
375 +[[image:image-20220602115852-3.png]]
304 304  
305 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
306 -(% style="color:blue" %)**The following picture shows that the burning is successful**
307 307  
308 -[[image:image-20220602105251-15.png]]
309 309  
379 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
310 310  
311 311  
312 -= 2.  FAQ =
382 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
313 313  
314 314  
315 -== 2.1  How to Compile Source Code for LA66? ==
316 316  
386 +== Order Info ==
317 317  
318 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
388 +Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
319 319  
390 +**XX**: The default frequency band
320 320  
392 +* **AS923**: LoRaWAN AS923 band
393 +* **AU915**: LoRaWAN AU915 band
394 +* **EU433**: LoRaWAN EU433 band
395 +* **EU868**: LoRaWAN EU868 band
396 +* **KR920**: LoRaWAN KR920 band
397 +* **US915**: LoRaWAN US915 band
398 +* **IN865**: LoRaWAN IN865 band
399 +* **CN470**: LoRaWAN CN470 band
400 +* **PP**: Peer to Peer LoRa Protocol
321 321  
322 -= 3.  Order Info =
402 +== Package Info ==
323 323  
404 +* LA66 USB LoRaWAN Adapter x 1
324 324  
325 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
406 += Reference =
326 326  
408 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
327 327  
328 -(% style="color:blue" %)**XXX**(%%): The default frequency band
329 -
330 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
331 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
332 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
333 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
334 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
335 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
336 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
337 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
338 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
339 -
340 -
341 -
342 -= 4.  Reference =
343 -
344 -
345 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
346 -
347 347  
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -784.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0